Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maintainability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Conditionally reprogrammed human normal bronchial epithelial cells express comparable levels of cytochromes p450 and are sensitive to BaP induction

Highlights: • Conditionally reprogrammed human normal bronchial epithelial cells can be propagated for a long term in vitro. • Conditionally reprogrammed human normal bronchial epithelial cells maintain normal karyotype and differentiation potential. • Conditionally reprogrammed human normal bronchial epithelial cells express comparable levels of Cytochromes p450 enzymes. • Conditionally reprogrammed human normal bronchial epithelial cells are sensitive to BaP induction. Cytochromes p450 (CYPs) metabolize thousands of endogenous and exogenous chemicals, including toxic compounds and drugs. The primary cells have relative short life span and are not able to sustain levels of metabolic enzymes CYPs expression and activity long enough in vitro. The immortalized cell lines are also not ideal for toxicity testing because of their low levels of CYPs expression. In this study, we established human normal bronchial epithelial cells using conditional reprogramming (CR) technique from three human donors (named as CR-HNBE1-3). These CR cells can proliferate continuously in defined culture system over 50 PDs within 2 months. The CR-HNBE cells exhibited the normal diploid karyotype, normal response to DNA damage and normal differentiation potential under the matrigel 3D culture condition. The CR-HNBE cells express the basal epithelial marker cytokeratin 14 (CK14) and epithelial secretory marker Mucin 5AC. Most importantly, CR-HNBE cells express comparable levels of CYP1B1 and CYP2E1 as those in lung tissue. These CR cells also express comparable mRNA of CYP1A1/CYP1A2, CYP2B6/CYP2C9/CYP2D6 and CYP3A4/CYP3A5 compared to the lung tissue. The basal activity of CYP1A1/CYP1B1 in these CR cells was 3–6 folds higher than that of 16HBE cells (an immortalized cell line widely used in toxicology field). Our data also demonstrated that Benzo(a)pyrene (BaP) induced up to 100 folds of mRNA expression of CYP1A1 or CYP1A2 in CR-HNBE cells. The activity of CYP1A1/CYP1B1 was induced by BaP up to 7–8 folds in CR-HNBE cells, while the activity of CYP1A1/CYP1B1 was induced maximum 2.5 folds in 16HBE cells. Taken together, CR-HNBE cells express comparable levels of CYPs and are sensitive to BaP induction, and will serve a sensitive, physiological and valuable in vitro toxicity testing model. This is the first report that normal human airway cells can be propagated for a long time and maintain comparable levels of CYPs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

CTCF is required for maintenance of auditory hair cells and hearing function in the mouse cochlea

Auditory hair cells play an essential role in hearing. These cells convert sound waves, mechanical stimuli, into electrical signals that are conveyed to the brain via spiral ganglion neurons. The hair cells are located in the organ of Corti within the cochlea. They assemble in a special arrangement with three rows of outer hair cells and one row of inner hair cells. The proper differentiation and preservation of auditory hair cells are essential for acquiring and maintaining hearing function, respectively. Many genetic regulatory mechanisms underlying hair-cell differentiation and maintenance have been elucidated to date. However, the role of epigenetic regulation in hair-cell differentiation and maintenance has not been definitively demonstrated. CTCF is an essential epigenetic component that plays a primary role in the organization of global chromatin architecture. To determine the role of CTCF in mammalian hair cells, we specifically deleted Ctcf in developing hair cells by crossing Ctcf{sup fl/fl} mice with Gfi1{sup Cre/+} mice. Gfi1{sup Cre}; Ctcf{sup fl/fl} mice did not exhibit obvious developmental defects in hair cells until postnatal day 8. However, at 3 weeks, the Ctcf deficiency caused intermittent degeneration of the stereociliary bundles of outer hair cells, resulting in profound hearing impairment. At 5 weeks, most hair cells were degenerated in Gfi1{sup Cre}; Ctcf{sup fl/fl} mice, and defects in other structures of the organ of Corti, such as the tunnel of Corti and Nuel's space, became apparent. These results suggest that CTCF plays an essential role in maintaining hair cells and hearing function in mammalian cochlea.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Activation of neuregulin-4 in adipocytes improves metabolic health by enhancing adipose tissue angiogenesis

Highlights: • Targeted activation of Nrg4 in adipocytes enhanced adipose tissue angiogenesis. • Activation of Nrg4 in adipocytes improved systemic metabolic health. • Angiogenesis inhibition abolished the beneficial effects of Nrg4 on metabolic health. • Inhibition of ErbB signaling in EC abrogated the Nrg4-mediated angiogenesis. • ErbB signal inhibition canceled the beneficial effects of Nrg4 on metabolic health. Obesity often causes systemic metabolic disorders in close association with adipose tissue dysfunction. Adipose tissue contains well-developed vasculatures, and obesity mediates vascular rarefaction that causes hypoxia and triggers inflammation in adipose tissue. Adipose tissue-derived neuregulin-4 (Nrg4) is an immerging factor that is critically involved in metabolic homeostasis. We recently identified that Nrg4 is an angiogenic adipokine that plays an important role in maintaining adipose tissue vasculature. Here, we further validated its beneficial role in metabolic health primarily by enhancing adipose tissue angiogenesis. Targeted activation of Nrg4 in adipocytes improved metabolic health in mice under both normal and high fat dietary condition without changes in body weight. Activation of Nrg4 increased blood vessels in white adipose tissue, and ameliorated adipose tissue hypoxia under obese condition. Of note, inhibition of angiogenesis by sugen-treatment abolished the beneficial effects of Nrg4 on systemic metabolic health. Furthermore, targeted inhibition of Nrg4-ErbB signaling in adipose tissue vasculature using prohibitin binding peptide-conjugated nanocarrier abrogated the enhanced adipose tissue angiogenesis, and canceled the improved metabolic health induced by Nrg4 activation. These data further support a crucial role of Nrg4 in maintaining systemic metabolic homeostasis at least partially through enhancing adipose tissue angiogenesis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Stromal interaction molecule 1 is required for neonatal testicular development in mice

Highlights: • STIM1 is found in Sertoli cells and associated with neonatal testicular development. • STIM1 is required for Sertoli cell orientation and germ cell survival. • Stim1 knockdown in neonatal testis altered the testicular phenotype and induced ROS. • ROS inhibition partially rescued the Stim1 knockdown phenotype in neonatal testes. • STIM1 can maintain neonatal testicular development by inhibiting ROS activation. Stromal interaction molecule 1 (STIM1) is a transmembrane endoplasmic reticulum protein, and it serves as a Ca{sup 2+} sensor and activator of store-operated Ca{sup 2+} entry (SOCE). We have previously identified STIM1 in the proteome profile of mice neonatal testes, revealing STIM1 to be associated with neonatal testicular development. Here, to further explore the location and function of STIM1 in mice testes, we studied the effect of Stim1 gene knockdown on neonatal testicular development by testicular culture. Our results revealed that STIM1 was primarily located in Sertoli cells. Knockdown of Stim1 gene using morpholino in neonatal testis caused the mislocation of Sertoli cells and loss of germ cells, which were associated with the aberrant reactive oxygen species (ROS) activation, while inhibition of ROS could partly rescue the phenotypes caused by Stim1 gene knockdown. In conclusion, our study suggests that STIM1 can maintain neonatal testicular development by inhibiting ROS activation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Correlation of spatio-temporal characteristics of intestinal inflammation with IL-17 in a rat model of hypoganglionosis

Highlights: • Concomitant expression of C-RP, TNF-, and IL-17 in HD-like animal model induced by benzalkonium chloride. • Their expression maintained the highest level at Day 21. • IL-17 may be involved in spatio-temporal inflammation. Interleukin 17 expression is increased in children with Hirschsprung disease, which is characterized by intestinal inflammation. This study designed to exploit the characteristics of intestinal inflammation and examine the correlation of interleukin 17 in this process of hypoganglionosis model established by benzalkonium chloride treatment. Colon sections from female rats were treated with benzalkonium chloride to induce hypoganglionosis or with saline alone as a sham control. C-reactive protein and tumor necrosis factor- were used as markers of inflammation. Expression of C-reactive protein, tumor necrosis factor-, and interleukin 17 was assessed in colon tissue and blood serum on days 7, 14 and 21 after treatment. The correlation between C-reactive protein, tumor necrosis factor-, and interleukin 17 expression was estimated using the Spearman's rank-correlation coefficient. C-reactive protein, tumor necrosis factor-, and interleukin 17 were strongly expressed in submucosa and mucosa layers and serum from treated animals. The expression of C-reactive protein, tumor necrosis factor-, and interleukin 17 maintained the highest level at Day 21. Only C-reactive protein and tumor necrosis factor- expression was increased in control animals and only on day 7. Spearman's rank correlation coefficient was significant in C-reactive protein, tumor necrosis factor-, and interleukin 17 at Day 7, 14 and 21. Concomitant upregulation of C-reactive protein, tumor necrosis factor-, and interleukin 17 and significant positive correlations between C-reactive protein, tumor necrosis factor-, and interleukin 17 may imply that interleukin 17 is involved in spatio-temporal inflammation induced by benzalkonium chloride.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Spontaneous oscillation of the ciliary beat frequency regulated by release of Ca2+ from intracellular stores in mouse nasal epithelia

Highlights: • Spontaneous CBF oscillation was found in ciliated mouse nasal epithelial cells. • The CBF oscillation was caused by the [Ca{sup 2+}]i oscillation. • The [Ca{sup 2+}]i oscillations were generated by the periodic Ca{sup 2+} release from internal stores via interactions between IP{sub 3} and IP{sub 3} receptor. • The CBF oscillation may play a crucial role for maintaining an efficient mucociliary clearance in nasal epithelia. Ciliary beating frequency (CBF) was investigated in ciliated nasal epithelial cells (cMNECs) isolated from mice using video microscopy equipped with a high-speed camera. In cMNECs, a spontaneous CBF oscillation was observed. The CBF oscillation was abolished by BAPTA-AM but not by Ca{sup 2+}-free solution. The addition of thapsigargin, which depletes Ca{sup 2+} from internal stores, also abolished CBF oscillation. Moreover, the intracellular Ca{sup 2+} concentration [Ca{sup 2+}]{sub i}, spontaneously oscillated even with the Ca{sup 2+}-free solution. Moreover, 2APB (an inhibitor of the IP{sub 3} receptor) abolished CBF oscillation in cMNECs. Overall, these findings suggest that the CBF oscillation in cMNECs is triggered by the release of Ca{sup 2+} from the IP{sub 3}-sensitive internal stores. Moreover, IBMX, an inhibitor of phosphodiesterase, did not affect CBF oscillation in cMNECs, although it slightly increased CBF. These results suggest that CBF oscillations were induced by [Ca{sup 2+}]{sub i} oscillation controlled via the release of Ca{sup 2+} from IP{sub 3}-sensitive stores, rather than via cAMP accumulation. CBF oscillation possibly plays a crucial role in maintaining an efficient mucociliary clearance in the nasal epithelia.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Modeling hydrodynamic and biomass pyrolysis effects of recycled product gases in a bubbling fluidized bed reactor

Fast pyrolysis of biomass in a fluidized bed reactor is typically conducted in a nitrogen gas environment. Recycling product gas can improve the economics of operating such a system by reducing reliance on pure process streams, but much less is known about how recycling pyrolysis product gas may affect fluidization behavior and pyrolysis kinetics. Therefore, gas effects in a fluidized bed biomass pyrolysis reactor were investigated using engineering correlations, low-order models, and CFD simulations for N 2 , H 2 , CO, CO 2 , and CH 4 carrier gas mixtures. Here, our findings reveal viscosity of a gas mixture can be significantly underestimated depending on the model and correlation. Furthermore, fluidization characteristics such as U mf and gas-solid convective heat transfer can be greatly affected by the gas properties. By utilizing H 2 as the fluidizing gas (instead of N 2 ), while maintaining a constant fluidization ratio (U s /U mf ), the bio-oil yields can be increased ~5%. This is due to the lower density H 2 producing similar hydrodynamics as N 2 at higher gas flow rates. These higher flow rates result in shorter gas residence times, and as a result, less secondary reactions that convert bio-oil to light gases and char. Model results also suggest that bio-oil yield is not significantly affected by the type of carrier gas used, with bio-oil yield varying by ~2% across different gas mixtures while maintaining constant flow rate. In conclusion, this indicates that recycled pyrolytic gas can be used as the carrier gas for biomass pyrolysis.

09 BIOMASS FUELS↗
DOE OSTI2016

Ten questions concerning integrating smart buildings into the smart grid

Recent advances in information and communications technology (ICT) have initiated development of a smart electrical grid and smart buildings. Buildings consume a large portion of the total electricity production worldwide, and to fully develop a smart grid they must be integrated with that grid. Buildings can now be 'prosumers' on the grid (both producers and consumers), and the continued growth of distributed renewable energy generation is raising new challenges in terms of grid stability over various time scales. Buildings can contribute to grid stability by managing their overall electrical demand in response to current conditions. Facility managers must balance demand response requests by grid operators with energy needed to maintain smooth building operations. For example, maintaining thermal comfort within an occupied building requires energy and, thus an optimized solution balancing energy use with indoor environmental quality (adequate thermal comfort, lighting, etc.) is needed. Successful integration of buildings and their systems with the grid also requires interoperable data exchange. However, the adoption and integration of newer control and communication technologies into buildings can be problematic with older legacy HVAC and building control systems. Public policy and economic structures have not kept up with the technical developments that have given rise to the budding smart grid, and further developments are needed in both technical and non-technical areas.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2017

Influence of limestone on the hydration of ternary slag cements

The hydration kinetics, microstructure and pore solution composition of ternary slag-limestone cement have been investigated. Commercial CEM I 52.5 R was blended with slag and limestone; maintaining a clinker to SCM ratio of 50:50 with up to 20% slag replaced by limestone. The sulphate content was maintained at 3% in all composite systems. Hydration was followed by a combination of isothermal calorimetry, chemical shrinkage, scanning electron microscopy, and thermogravimetric analysis. The hydration of slag was also followed by SEM image analysis and the QXRD/PONKCS method. The accuracy of the calibrated PONKCS phase was assessed on slag and corundum mixes of varying ratios, at different water/solid ratios. Thus, the method was used to analyse hydrated cement without dehydrating the specimens. The results show that the presence of limestone enhanced both clinker and slag hydration. The pore volume and pore solution chemistry were further examined to clarify the synergistic effects. The nucleation effects account for enhanced clinker hydration while the space available for hydrate growth plus the lowering of the aluminium concentration in the pore solution led to the improved slag hydration.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Hexagonal boron nitride catalyst in a fixed-bed reactor for exothermic propane oxidation dehydrogenation

Hexagonal boron nitride (h-BN) with high thermal conductivity is potentially an effective catalyst for highly exothermic propane oxidative dehydrogenation (ODH) reaction. Here, we report our experimental and theoretic studies of such a catalyst for propane ODH in a fixed-bed reactor. Based on the computational fluid dynamics calculation (CFD) results, the catalyst bed temperature increases by less than 1 degrees C in the h-BN catalyst bed which is much smaller than that (8 degrees C) in the VOx/gamma-Al2O3 catalyst bed at a similar propane conversion (25%) using a micro-tubular reactor with a diameter of 6 mm. Even in an industrially relevant reactor with an inner diameter of 60 mm, a uniform temperature profile can still be maintained using the h-BN catalyst bed due to its excellent thermal conductivity as opposed to a temperature gradient of 47 degrees C in the VOx/gamma-Al2O3 catalyst bed. The results reported here provide useful information for potential application of h-BN catalyst in propane ODH. (C) 2018 Elsevier Ltd. All rights reserved.

Tian, jinshu↗
DOE OSTI2019

Achieving Long-Lived Triplet States in Intramolecular SF Films through Molecular Engineering

Tuning singlet fission (SF) dynamics in the solid states in a controllable way is vitally important yet still a challenge due to the electronic coupling, which is highly sensitive to molecular packing. Here, we demonstrate a molecular engineering approach to independently optimize the triplet generation and decay process in intramolecular SF films by using terphenyl-bridged TIPS-pentacene tetramers. By controlling the degree of steric hindrance within individual tetramers, we can systematically tune the degree of intermolecular coupling in thin films. Taking advantage of both the intra- and intermolecular SF processes allows us to maintain a rapid triplet pair generation process, even in the case of weak intermolecular coupling. This approach allows us to maintain a picosecond triplet generation process while simultaneously varying the rate constants for triplet-triplet annihilation over three orders of magnitude.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Deformation accommodating periodic computational domain for a uniform velocity gradient

Many multiscale methods for granular materials use periodic computational domains to consider particle scale interactions and then calculate the stress to drive the continuum scale calculations. For problems involving large material deformations, the computation domain often needs to be reinitialized because of the distortion, causing the loss of the history information of the system. This work introduces an algorithm to accommodate a large deformation of the material while maintaining the computational domain cuboid to avoid the domain reinitialization during the computation. The algorithm uses a rotating frame of reference, in which the velocity gradient can be represented by an upper triangular matrix. The deformation caused by the upper triangular matrix is treated by the image system implied in the periodicity to maintain the computational domain cuboid. The effect from the rotation of the reference frame is considered using the inertial forces. Finally, simulations of simple and pure shear motions are carried out to illustrate the algorithm.

42 ENGINEERING↗
DOE OSTI2014

An automated target species selection method for dynamic adaptive chemistry simulations

The relative importance index (RII) approach for determining appropriate target species for dynamic adaptive chemistry (DAC) simulations using the directed relation graph with error propagation (DRGEP) method is developed. The adequacy and effectiveness of this RII method is validated for two fuels: n-heptane and isopentanol, representatives of a ground transportation fuel component and bio-alcohol, respectively. The conventional method of DRGEP target species selection involves picking an unchanging (static) set of target species based on the combustion processes of interest; however, these static target species may not remain important throughout the entire combustion simulation, adversely affecting the accuracy of the method. In particular, this behavior may significantly reduce the accuracy of the DRGEP-based DAC approach in complex multidimensional simulations where the encountered combustion conditions cannot be known a priori with high certainty. Moreover, testing multiple sets of static target species to ensure the accuracy of the method is generally computationally prohibitive. Instead, the RII method determines appropriate DRGEP target species solely from the local thermo-chemical state of the simulation, ensuring that accuracy will be maintained. Further, the RII method reduces the expertise required of users to select DRGEP target species sets appropriate to the combustion phenomena under consideration. Constant volume autoignition simulations run over a wide range of initial conditions using detailed reaction mechanisms for n-heptane and isopentanol show that the RII method is able to maintain accuracy even when traditional static target species sets fail, and are even more accurate than expert-selected target species sets. Additionally, the accuracy and efficiency of the RII method are compared to those of static target species sets in single-cell engine simulations under homogeneous charge compression ignition conditions. For simulations using more stringent DRGEP thresholds, the RII method performs similarly to that of the static target species sets. With a larger DRGEP threshold, the RII method is significantly more accurate than the static target species sets without imposing significant computational overhead. Moreover, the applicability of the RII method to a DRG-based DAC scheme is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

An experimental and chemical kinetic modeling study of 4-butoxyheptane combustion

Here, the combustion kinetics of a novel oxygenated bioblendstock for diesel, 4-butoxyheptane (4-BH), was investigated experimentally using a flow reactor and a heated, high-pressure shock tube. The flow reactor experiments employed oxygen as the oxidizer and helium as the diluent with oxidation conducted at atmospheric pressure and 10 bar for temperatures from 400 to 1000 K at 20-K intervals. The fuel, oxidizer, and diluent flow rates were varied at different temperatures to maintain a constant initial fuel mole fraction of 1000 ppm, with stoichiometric equivalence ratio, and a residence time of 2.0 s. The reacted gas was fed to two separate GC systems that could qualitatively and quantitatively detect product species. Additionally, real fuel-air ignition delay time (IDT) data were collected using a heated, high-pressure shock-tube facility. Fuel lean (φ = 0.5) and stoichiometric (φ = 1.0) mixtures were investigated at 10 atm as well as at 30 atm for the fuel lean case for temperatures between 847 and 1259 K. A detailed chemical kinetics mechanism was developed to model the product distribution from the flow reactor and IDTs from the shock tube. The proposed model was able to predict the double NTC behavior in flow reactor experiments reasonably well. Model predictions at low temperatures were observed to be highly sensitive to the rate constants of ketohydroperoxide (KHP) decomposition in the case of the OOH group in α position which were modeled based on existing literature studies on ethers. It was noted that in the absence of theoretical or experimental studies, the rate constants for KHP decomposition used in the literature were empirically set. Additional studies are required to address the gap in model prediction obtained in this study and to reduce the uncertainty in kinetics models for ether oxidation. Predicted product concentrations and IDTs showed some quantitative agreement with experimental data, but the overall reactivity of the IDTs is underpredicted. Additionally, significant deviation is observed for the IDT results at 10 atm for the stoichiometric case with minor deviations for the other cases. The reaction pathways to the missing products were then further analyzed theoretically through quantum-mechanical calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Reduced-order modeling through machine learning and graph-theoretic approaches for brittle fracture applications

Typically, thousands of computationally expensive micro-scale simulations of brittle crack propagation are needed to upscale lower length scale phenomena to the macro-continuum scale. Running such a large number of crack propagation simulations presents a significant computational challenge, making reduced-order models (ROMs) attractive for this task. Here, the ultimate goal of this research is to develop ROMs that have sufficient accuracy and low computational cost so that these upscaling simulations can be readily performed. However, constructing ROMs for these complex simulations presents its own challenge. Here, we present and compare four different approaches for reduced-order modeling of brittle crack propagation in geomaterials. These methods rely on machine learning (ML) and graph-theoretic algorithms to approximate key aspects of the brittle crack problem. These methods also incorporate different physics-based assumptions in order to reduce the training requirements while maintaining accurate physics as much as possible. Results from the ROMs are directly compared against a high-fidelity model of brittle crack propagation. Further, the strengths and weaknesses of the ROMs are discussed, and we conclude that combining smart physics-informed feature engineering with highly trainable ML models provides the best performance. The ROMs considered here have computational costs that are orders-of-magnitude less than the cost associated with high-fidelity physical models while maintaining good accuracy.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Accelerated application development: The ORNL Titan experience

The use of computational accelerators such as NVIDIA GPUs and Intel Xeon Phi processors is now widespread in the high performance computing community, with many applications delivering impressive performance gains. However, programming these systems for high performance, performance portability and software maintainability has been a challenge. In this paper we discuss experiences porting applications to the Titan system. Titan, which began planning in 2009 and was deployed for general use in 2013, was the first multi-petaflop system based on accelerator hardware. To ready applications for accelerated computing, a preparedness effort was undertaken prior to delivery of Titan. In this paper we report experiences and lessons learned from this process and describe how users are currently making use of computational accelerators on Titan.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Direct numerical simulations of reacting flows with detailed chemistry using many-core/GPU acceleration

A new direct numerical simulation (DNS) code for multi-component gaseous reacting flows has been developed at KAUST, with the state-of-the-art programming model for next generation high performance computing platforms. The code, named KAUST Adaptive Reacting Flows Solver (KARFS), employs the MPI+X programming, and relies on Kokkos for “X” for performance portability to multi-core, many-core and GPUs, providing innovative software development while maintaining backward compatibility with established parallel models and legacy code. The capability and potential of KARFS to perform DNS of reacting flows with large, detailed reaction mechanisms is demonstrated with various model problems involving ignition and turbulent flame propagations with varying degrees of chemical complexities.

Computer Science↗
DOE OSTI2024

Vascular Carbon/Carbon composites for concentrated solar power

Due to their exceptional mechanical and thermal properties under high temperature conditions, for the first time, a novel vascular (embedded channels) Carbon/Carbon (C/C) composite was developed for use as a modular concentrated solar power (CSP) gas receiver. The fabrication process involves the combination of the vaporization of sacrificial component (VaSC) technique with conventional methods to produce C/C composites with well preserved channels. Different heat treatments were evaluated together with X-ray diffraction (XRD) analysis to determine optimal fabrication conditions that maintains the material and channel’s integrity. Mechanical testing confirms that structural integrity is maintained, with statistical analyses indicating no compromise in flexural strength or modulus. Furthermore, this research introduces an innovative pathway for efficient CSP gas receivers, which can bridge the gap towards improved energy generation efficiency in next-gen CSP plants through higher operating temperatures with the use of C/C composites.

14 SOLAR ENERGY↗