Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hierarchy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Transport theory and the WKB approximation for interplanetary MHD fluctuations

An alternative approach, based on a multiple scale analysis, is presented in order to reconcile the traditional Wentzel-Kramer-Brillouin (WKB) approach to the modeling of interplanetary fluctuations in a mildly inhomogeneous large-scale flow with a more recently developed transport theory. This enables us to compare directly, at a formal level, the inherent structure of the two models. In the case of noninteracting, incompressible (Alven) waves, the principle difference between the two models is the presence of leading-order couplings (called 'mixing effects') in the non-WKB turbulence model which are absent in a WKB development. Within the context of linearized MHD, two cases have been identified for which the leading order non-WJB 'mixing term' does not vanish at zero wavelength. For these cases the WKB expansion is divergent, whereas the multiple-scale theory is well behaved. We have thus established that the WKB results are contained within the multiple-scale theory, but leading order mixing effects, which are likely to have important observational consequences, can never be recovered in the WKB style expansion. Properties of the higher-order terms in each expansion are also discussed, leading to the conclusion that the non-WKB hierarchy may be applicable even when the scale separation parameter is not small.

Matthaeus, William H.↗

Decision process for effective system reuse

The speed of growth in high technology differs for software, hardware and firmware. Hardware innovations come in leaps, as opposed to the gradual improvements in software and firmware technologies. This inhibits the full utilization of the hardware advances and reduces the cost benefit ratio of high technology ventures. The Microelectronics Systems Branch has committed its resources to use the look ahead technique whereby the technology is researched in its use, current development track and its future capabilities. This knowledge is used to meet the requirements of the space program not only in the nineties but also through 2005. This paper illustrates Analytical Hierarchy Process techniques used effectively and very successfully to support projects reusing systems with predicted enhancements.

Mirchandani, Chandru↗

Post-launch data analysis for the cosmic ray isotope experiment ONR-604 in the Combined Release and Radiation Effects Satellite (CRRES)

Research was continued on the origins, acceleration mechanisms, and the propagation modes of the hierarchy of energetic charged particles found in a wide range of astrophysical settings, extending from the cosmic rays arriving from the depth of the galaxy to the energetic particles in the heliosphere and in the near earth environment. In particular this grant has been a vital support in the investigation of the particle radiations in the earth's magnetosphere. The ONR-604 instrument was launched in July 1990 aboard the CRRES spacecraft. The CRRES mission has been a joint program of NASA and the U.S. Air Force Space Test Program which has provided launch support and telemetry coverage. The spacecraft was placed into a low-inclination eccentric orbit with a period of approximately 10 hours, and thus measured charged particle fluxes in both interplanetary space and in the earth's trapped radiation. ONR-604 performed extremely well, both in interplanetary space and in the intense radiation belt environment. We were able to make detailed measurements of interplanetary fluxes and composition into L=4, or for more than 50% of the orbital period. Thus the experiment produced two valuable datasets, one set outside of L=4 for interplanetary studies, and one set inside of L=4 for radiation belt studies. The data returned by the University of Chicago ONR-604 instrument has been the base for 10 papers on magnetospheric and galactic energetic-particle research.

Simpson, John A.↗

On a production system using default reasoning for pattern classification

This paper addresses an unconventional application of a production system to a problem involving belief specialization. The production system reduces a large quantity of low-level descriptions into just a few higher-level descriptions that encompass the problem space in a more tractable fashion. This classification process utilizes a set of descriptions generated by combining the component hierarchy of a physical system with the semantics of the terminology employed in its operation. The paper describes an application of this process in a program, constructed in C and CLIPS, that classifies signatures of electromechanical system configurations. The program compares two independent classifications, describing the actual and expected system configurations, in order to generate a set of contradictions between the two.

Barry, Matthew R.↗

Parallel automated adaptive procedures for unstructured meshes

Consideration is given to the techniques required to support adaptive analysis of automatically generated unstructured meshes on distributed memory MIMD parallel computers. The key areas of new development are focused on the support of effective parallel computations when the structure of the numerical discretization, the mesh, is evolving, and in fact constructed, during the computation. All the procedures presented operate in parallel on already distributed mesh information. Starting from a mesh definition in terms of a topological hierarchy, techniques to support the distribution, redistribution and communication among the mesh entities over the processors is given, and algorithms to dynamically balance processor workload based on the migration of mesh entities are given. A procedure to automatically generate meshes in parallel, starting from CAD geometric models, is given. Parallel procedures to enrich the mesh through local mesh modifications are also given. Finally, the combination of these techniques to produce a parallel automated finite element analysis procedure for rotorcraft aerodynamics calculations is discussed and demonstrated.

Shephard, M. S.↗

Prioritization of engineering support requests and advanced technology projects using decision support and industrial engineering models

The evaluation and prioritization of Engineering Support Requests (ESR's) is a particularly difficult task at the Kennedy Space Center (KSC) -- Shuttle Project Engineering Office. This difficulty is due to the complexities inherent in the evaluation process and the lack of structured information. The evaluation process must consider a multitude of relevant pieces of information concerning Safety, Supportability, O&M Cost Savings, Process Enhancement, Reliability, and Implementation. Various analytical and normative models developed over the past have helped decision makers at KSC utilize large volumes of information in the evaluation of ESR's. The purpose of this project is to build on the existing methodologies and develop a multiple criteria decision support system that captures the decision maker's beliefs through a series of sequential, rational, and analytical processes. The model utilizes the Analytic Hierarchy Process (AHP), subjective probabilities, the entropy concept, and Maximize Agreement Heuristic (MAH) to enhance the decision maker's intuition in evaluating a set of ESR's.

Tavana, Madjid↗

Turbulence Modeling: Progress and Future Outlook

Progress in the development of the hierarchy of turbulence models for Reynolds-averaged Navier-Stokes codes used in aerodynamic applications is reviewed. Steady progress is demonstrated, but transfer of the modeling technology has not kept pace with the development and demands of the computational fluid dynamics (CFD) tools. An examination of the process of model development leads to recommendations for a mid-course correction involving close coordination between modelers, CFD developers, and application engineers. In instances where the old process is changed and cooperation enhanced, timely transfer is realized. A turbulence modeling information database is proposed to refine the process and open it to greater participation among modeling and CFD practitioners.

Marvin, Joseph G.↗

An Integrated Planning Representation Using Macros, Abstractions, and Cases

Planning will be an essential part of future autonomous robots and integrated intelligent systems. This paper focuses on learning problem solving knowledge in planning systems. The system is based on a common representation for macros, abstractions, and cases. Therefore, it is able to exploit both classical and case based techniques. The general operators in a successful plan derivation would be assessed for their potential usefulness, and some stored. The feasibility of this approach was studied through the implementation of a learning system for abstraction. New macros are motivated by trying to improve the operatorset. One heuristic used to improve the operator set is generating operators with more general preconditions than existing ones. This heuristic leads naturally to abstraction hierarchies. This investigation showed promising results on the towers of Hanoi problem. The paper concludes by describing methods for learning other problem solving knowledge. This knowledge can be represented by allowing operators at different levels of abstraction in a refinement.

Baltes, Jacky↗

Irrelevance in Problem Solving

The notion of irrelevance underlies many different works in AI, such as detecting redundant facts, creating abstraction hierarchies and reformulation and modeling physical devices. However, in order to design problem solvers that exploit the notion of irrelevance, either by automatically detecting irrelevance or by being given knowledge about irrelevance, a formal treatment of the notion is required. In this paper we present a general framework for analyzing irrelevance. We discuss several properties of irrelevance and show how they vary in a space of definitions outlined by the framework. We show how irrelevance claims can be used to justify the creation of abstractions thereby suggesting a new view on the work on abstraction.

Levy, Alon Y.↗

Use of HSM with Relational Databases

Hierarchical storage management (HSM) systems have evolved to become a critical component of large information storage operations. They are built on the concept of using a hierarchy of storage technologies to provide a balance in performance and cost. In general, they migrate data from expensive high performance storage to inexpensive low performance storage based on frequency of use. The predominant usage characteristic is that frequency of use is reduced with age and in most cases quite rapidly. The result is that HSM provides an economical means for managing and storing massive volumes of data. Inherent in HSM systems is system managed storage, where the system performs most of the work with minimum operations personnel involvement. This automation is generally extended to include: backup and recovery, data duplexing to provide high availability, and catastrophic recovery through use of off-site storage.

Breeden, Randall↗

CROSS: A GDSS for the Evaluation and Prioritization of Engineering Support Requests and Advanced Technology Projects at NASA

Objective evaluation and prioritization of engineering support requests (ESRs) is a difficult task at the Kennedy Space Center (KSC) Shuttle Project Engineering Office. The difficulty arises from the complexities inherent in the evaluation process and the lack of structured information. The purpose of this project is to implement the consensus ranking organizational support system (CROSS), a multiple criteria decision support system (DSS) developed at KSC that captures the decision maker's beliefs through a series of sequential, rational, and analytical processes. CROSS utilizes the analytic hierarchy process (AHP), subjective probabilities, entropy concept, and maximize agreement heuristic (MAH) to enhance the decision maker's intuition in evaluation ESRs. Some of the preliminary goals of the project are to: (1) revisit the structure of the ground systems working team (GWST) steering committee, (2) develop a template for ESR originators to provide more comple and consistent information to the GSWT steering committee members to eliminate the need for a facilitator, (3) develop an objective and structured process for the initial screening of ESRs, (4) extensive training of the stakeholders and the GWST steering committee to eliminate the need for a facilitator, (5) automate the process as much as possible, (6) create an environment to compile project success factor data on ESRs and move towards a disciplined system that could be used to address supportability threshold issues at the KSC, and (7) investigate the possibility of an organization-wide implementation of CROSS.

Tavana, Madjid↗

SPASIM: A Spacecraft Simulator

The SPAcecraft SIMulator (SPASIM) simulates the functions and resources of a spacecraft to quickly perform conceptual design (Phase A) trade-off and sensitivity analyses and uncover any operational bottlenecks during any part of the mission. Failure modes and operational contingencies can be evaluated allowing operational planning (what-if scenarios) and optimization for a range of mission scenarios. The payloads and subsystems are simulated, using a hierarchy of graphical models, in terms of how their functions affect resources such as propellant, power, and data. Any of the inputs and outputs of the payloads and subsystems can be plotted during the simulation or stored in a file so they can be used by other programs. Most trade-off analyses, including those that compare current versus advanced technology, can be performed by changing values in the parameter menus. However, when a component is replaced by one with a different functional architecture, its graphical model can also be modified or replaced by drawing from a component library. SPASIM has been validated using several spacecraft designs that were at least at the Critical Design Review level. The user and programmer guide, including figures, is available on line as a hypertext document. This is an easy-to-use and expandable tool which is based on MATLAB(R) and SIMULINK(R). It runs on Silicon Graphics Inc. workstations and personal computers with Windows 95(TM) or NT(TM).

Liceaga, Carlos A.↗

Architecture for Adaptive Intelligent Systems

We identify a class of niches to be occupied by 'adaptive intelligent systems (AISs)'. In contrast with niches occupied by typical AI agents, AIS niches present situations that vary dynamically along several key dimensions: different combinations of required tasks, different configurations of available resources, contextual conditions ranging from benign to stressful, and different performance criteria. We present a small class hierarchy of AIS niches that exhibit these dimensions of variability and describe a particular AIS niche, ICU (intensive care unit) patient monitoring, which we use for illustration throughout the paper. We have designed and implemented an agent architecture that supports all of different kinds of adaptation by exploiting a single underlying theoretical concept: An agent dynamically constructs explicit control plans to guide its choices among situation-triggered behaviors. We illustrate the architecture and its support for adaptation with examples from Guardian, an experimental agent for ICU monitoring.

ACTIVE CONTROL↗

Southern Hemisphere In Situ Observations of OH, HO2, CIO and BrO from the ER-2 Aircraft for the 1994 ASHOE Mission

A summary of the first order scientific conclusions that emerged from the research done under this grant are as follows: (1) For the first time, the concentration of the key hydrogen and halogen radicals OH, H02, ClO and BrO were determined on a global scale extending from the arctic circle to the antarctic circle, over the altitude domain of the ER-2. That domain extends from 15-20 km altitude, covering a critical part of the lower stratosphere; (2) Simultaneous, in situ measurements of the concentrations of OH, H02, ClO, BrO, NO and NO2 demonstrate the predominance of odd-hydrogen and halogen free radical catalysis in determining the rate of removal of ozone in the lower stratosphere over the complete ASHOE mission. This extends to the global scale the "first look" data obtained during the NASA Stratospheric Photochemistry and Dynamics Experiment (SPADE), executed out of Ames Research Center in June 1993. This represents a major rearrangement of our understanding with respect to the hierarchy of dominant catalytic cycles controlling ozone loss in the lower stratosphere. For the past twenty years, it has been assumed that nitrogen radicals dominate the destruction rate of ozone in the lower stratosphere; (3) Throughout the altitude and latitude range covered by ASHOE, it was determined that a single catalytic cycle, HO2 + O3 yields OH + 2O2, accounted for one half of the total O3 removal in this region of the atmosphere. Halogen radical catalytic cycles were found to account for one third of the ozone loss, and nitrogen radicals were found to account for 20% of the loss; (4) Simultaneous observations of the full complement of radicals, tracers, ozone, and water vapor during ASHOE demonstrated quantitatively the coupling that exists between the rate limiting radicals and other reactive species in the photochemical reaction network. Specifically, the concentrations of ClO and HO2 are inversely correlated with the concentration of NOx. This carries the implication that the NOx effluent from the proposed High Speed Civil Transport may be less destructive to stratospheric ozone than had previously been thought. ASHOE brought this conclusion forward for the first time on a global basis; and (5) The density of BrO was measured on a global scale during ASHOE in the lower stratosphere. It was found that bromine is responsible for 55-65% of the local rate of catalytic destruction of ozone by reactions involving bromine and chlorine. Normalizing calculated loss rates to total available inorganic bromine and chlorine explicitly demonstrates that bromine is 60-80 times more efficient than chlorine in removing ozone in the lower stratosphere. An inferred value of total inorganic bromine is in excellent agreement with measurements of their source species, organic bromine compounds in the troposphere.

Anderson, James G.↗

Computational Simulation of Composite Behavior

Composite microfracture technique developed here is based on the concept of global strain energy release rate. Step-by-step procedures were outlined to evaluate composite microfracture. The technique can predict microfracture initiation/propagation, predict the "structural fracture toughness", and establish the hierarchy of fracture modes. Both unidirectional and cross-ply metal-matrix composite laminates were evaluated for microfracture, subjected to thermal and mechanical loads. Five NASA reports were published as shown in the bibliography and several presentations were made at the technical conferences/ symposia. Work was also performed to develop simplified micromechanics and macromechanics for ceramic matrix composites. A novel fiber sub-structuring technique was developed, which divides the fiber into several "slices" and applies the micromechanics equation at the "slice" level, which are then integrated upwards to get the ply and the laminate properties. It allows for a more accurate representation of interfacial conditions such as partial interface bond etc. It also predicts the stress-strain behavior of a composite up to failure by taking into account material properties dependence upon temperature as well as stress redistribution that occurs due to damage initiation and propagation. A computer code CEMCAN (Ceramic Matrix Composites Analyzer) which includes all these capabilities has been developed as a part of this research activity.

Keith, Theo G., Jr.↗

Defining Factors, Goals and Criteria for Reusable Component Evaluation

This paper presents an approach for defining evaluation criteria for reusable software components. We introduce a taxonomy of factors that influence selection, describe each of them, and present a hierarchical decomposition method for deriving reuse goals from factors and formulating the goals into an evaluation criteria hierarchy. We present some highlights from two case studies in which the approach was applied. The approach presented in this paper is a part of the Off-The-Shelf Option (OTSO) method that has been developed for reuseable component selection process.

Kontio, Jyrki↗

Semiconductors: In Situ Processing of Photovoltaic Devices

Current proposals for developing an extended human presence on the Moon and Mars increasingly consider the processing of nonterrestrial materials essential for keeping the Earth launch burden reasonable. Utilization of in situ resources for construction of lunar and Mars bases will initially require assessment of resource availability followed by the development of economically acceptable and technically feasible extraction processes. In regard to materials processing and fabrication, the lower gravity level on the Moon (0.125 g) and Mars (0.367 g) will dramatically change the presently accepted hierarchy of materials in terms of specific properties, a factor that must be understood and exploited. Furthermore, significant changes are expected in the behavior of liquid materials during processing. In casting, for example, mold filling and associated solidification processes have to be reevaluated. Finally, microstructural development, and therefore material properties, presently being documented through ongoing research in microgravity science and applications, need to be understood and scaled to the reduced gravity environments.

Curreri, Peter A.↗

Effects of Microgravity on the Formation of Aerogels

This paper describes research to investigate fundamental aspects of the effects of microgravity on the formation of the microstructure of metal oxide alcogels and aerogels. We are studying the role of gravity on pore structure and gel uniformity in collaboration with Marshall Space Flight Center (MSFC) on gelling systems under microgravity conditions. While this project was just initiated in May 1998, related research performed earlier is described along with the plans and rationale for the current microgravity investigation to provide background and describe newly developing techniques that should be useful for the current gellation studies. The role of gravity in materials processing must be investigated through the study of well-mastered systems. Sol-gel processed materials are near-perfect candidates to determine the effect of gravity on the formation and growth of random clusters from hierarchies of aggregated units. The processes of hydrolysis, condensation, aggregation and gellation in the formation of alcogels are affected by gravity and therefore provide a rich system to study under microgravity conditions. Supercritical drying of the otherwise unstable wet alcogel preserves the alcogel structure produced during sol-gel processing as aerogel. Supercritically dried aerogel provides for the study of material microstructures without interference from the effects of surface tension, evaporation, and solvent flow. Aerogels are microstructured, low density open-pore solids. They have many unusual properties including: transparency, excellent thermal resistance, high surface area, very low refractive index, a dielectric constant approaching that of air, and extremely low sound velocity. Aerogels are synthesized using sol-gel processing followed by supercritical solvent extraction that leaves the original gel structure virtually intact. These studies will elucidate the effects of microgravity on the homogeneity of the microstructure and porosity of aerogel. The presence of poorly controlled microporosity in aerogel leads to material non-uniformity that gives rise to increased light scattering. Investigation of the effect of gravity driven solute flows within microclusters and their effect on condensation and agglomeration reactions will enable us to improve the preparation and properties of aerogel. Increased clarity of images viewed through aerogel and decreased scattering from the pores of aerogel will significantly improve the prospects for large-scale adoption of aerogel in such applications as transparent insulating windows, high performance thermal insulation, and Cherenkov detectors.

Hunt, A. J.↗