Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Pore-Scale Study on the Positive Feedback Between Stress and Porosity Caused by Pressure Solution in Porous Media

Pressure solution is an important process in the evolution of sedimentary rocks, which provide storage space for most of our petroleum resources. It directly influences the generation, migration, and storage of petroleum fluids in subsurface sedimentary rocks. Here, in this paper, we develop a pore-scale, mechanochemical model to demonstrate a possible positive feedback between the local porosity and pore surface stress, in which a higher local porosity causes a higher local pore surface stress, thus enhancing pressure solution and consequently further increasing the local porosity. Pore surface stress represents stress on a solid grain adjacent to a pore. Specifically, the pore-scale, mechanochemical model directly simulates the stress distribution over solid and pore surfaces using a finite element model. The dissolution of solids at the solid-pore interfaces under a far-from-equilibrium condition is simulated using a first-order kinetics model that accounts for the local stress distribution. The updated pore geometry, caused by pore surface dissolution, is then used in the stress simulation in the next numerical iteration. Two types of porous media, the Oriskany sandstone and an artificial porous medium with spherical pores, were tested in the mechanochemical simulation. The positive stress-porosity feedback during pressure solution was observed in both samples. In addition, the model quantitatively illustrated the distribution of local mineral dissolution rates on all pore surfaces, as well as its relation to the effective mineral dissolution rate of the entire sample. Based on the comparison between the two porous media, the local mineral dissolution was regulated by pore space distribution, geometry, and coalescence during pressure solution. This work is the first that uses direct, pore-scale numerical simulation to demonstrate the positive stress-porosity feedback during pressure solution, which has the potential to advance the understanding of the mechanical-chemical (MC) coupling in many geological processes that are relevant to subsurface energy systems, such as the recovery of petroleum hydrocarbons and geothermal energy.

CT scanning↗

A Comparison of DER Voltage Regulation Technologies Using Real-Time Simulations

Grid operators are now considering using distributed energy resources (DERs) to provide distribution voltage regulation rather than installing costly voltage regulation hardware. DER devices include multiple adjustable reactive power control functions, so grid operators have the difficult decision of selecting the best operating mode and settings for the DER. In this work, we develop a novel state estimation-based particle swarm optimization (PSO) for distribution voltage regulation using DER-reactive power setpoints and establish a methodology to validate and compare it against alternative DER control technologies (volt–VAR (VV), extremum seeking control (ESC)) in increasingly higher fidelity environments. Distribution system real-time simulations with virtualized and power hardware-in-the-loop (PHIL)-interfaced DER equipment were run to evaluate the implementations and select the best voltage regulation technique. Each method improved the distribution system voltage profile; VV did not reach the global optimum but the PSO and ESC methods optimized the reactive power contributions of multiple DER devices to approach the optimal solution.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Convection-permitting hindcasting of diurnal variation of Mei-yu rainfall over East China with a global variable-resolution model

Two sets of 48-hr hindcast experiments for Mei-yu season using non-hydrostatic global variable-resolution model (MPAS-Atmosphere) with regional refinement at 4km resolution (V4km) and uniform 60km resolution (U60km) are first-time conducted to attempt at simulating the Mei-yu rainfall in 2015 over East China. The analysis focuses on the seasonal average of diurnal variation of precipitation amount (PA), intensity (PI), and frequency (PF). Both simulations reasonably reproduce the spatial distribution of PA. V4km is more skillful in simulating the spatial distributions and magnitudes of PF and PI. The diurnal cycle of Mei-yu rainfall shows a major early morning peak and a minor afternoon peak, contributed by precipitation during two sub-periods with distinct synoptic circulations. With strong Mei-yu in the first sub-period, the diurnal variation of PA is controlled by nocturnal southwesterly jet. V4km overestimates the morning peak mainly due to its bias in simulating boundary layer inertial oscillation. Although differences in PA between the simulations are small, U60km overestimates PF and underestimates PI. With weak Mei-yu in the second sub-period, the diurnal variation of PA is controlled by both synoptic circulation and local convection. At both resolutions, deviations in the large-scale circulation modulated by a few typhoons lead to positive biases in the morning peak of PA. After removing the typhoon impacts, V4km captures the observed diurnal cycle of PA well, while U60km significantly underestimates PA and PI particularly in the afternoon. Future studies focusing on advancing modeling of southwesterly jet and typhoons may further improve convection permitting simulation of Mei-yu rainfall.

Xu, Mingyue↗

Joint X-Ray, Kinetic Sunyaev–Zeldovich, and Weak Lensing Measurements: Toward a Consensus Picture of Efficient Gas Expulsion from Groups and Clusters

There is no consensus on how baryon feedback shapes the underlying matter distribution from either simulations or observations. We confront the uncertain landscape by jointly analyzing new measurements of the gas distribution around groups and clusters—DESI+ACT kinetic Sunyaev–Zel’dovich (kSZ) effect profiles and eROSITA X-ray gas masses—with mean halo masses characterized by galaxy–galaxy lensing. Across a wide range of halo masses ( M 500 = 10 13−14 M ⊙ ) and redshifts (0 < z < 1), we find evidence of more efficient gas expulsion beyond several R 500 than predicted by most state-of-the-art simulations. A like-with-like comparison reveals all kSZ and X-ray observations are inconsistent with the fiducial 1 Gpc 3 hydrodynamical FLAMINGO simulation, which was calibrated to reproduce pre-eROSITA X-ray gas fractions: eROSITA X-ray gas fractions are 2 × lower than the simulation, and the kSZ measurements are combined >8σ discrepant. The FLAMINGO simulation variant with the most gas expulsion, and therefore the most suppression of the matter power spectrum relative to a dark-matter-only simulation, provides a good description of how much gas is expelled and how far it extends; the enhanced gas depletion is achieved by more powerful but less frequent AGN outbursts. Joint kSZ, X-ray, and lensing measurements form a consistent picture of gas expulsion beyond several R 500 , implying a more suppressed matter power spectrum than predicted by most recent simulations. Complementary observables (e.g., thermal Sunyaev–Zel’dovich effect and fast radio bursts) and next-generation simulations are critical to understanding the physical mechanism behind this extreme gas expulsion and mapping its impact on the large-scale matter distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

An agent-based stochastic Occupancy Simulator

Occupancy has significant impacts on building performance. However, in current building performance simulation programs, occupancy inputs are static and lack diversity, contributing to discrepancies between the simulated and actual building performance. This work presents an Occupancy Simulator that simulates the stochastic behavior of occupant presence and movement in buildings, capturing the spatial and temporal occupancy diversity. Each occupant and each space in the building are explicitly simulated as an agent with their profiles of stochastic behaviors. The occupancy behaviors are represented with three types of models: (1) the status transition events (e.g., first arrival in office) simulated with probability distribution model, (2) the random moving events (e.g., from one office to another) simulated with a homogeneous Markov chain model, and (3) the meeting events simulated with a new stochastic model. A hierarchical data model was developed for the Occupancy Simulator, which reduces the amount of data input by using the concepts of occupant types and space types. Finally, a case study of a small office building is presented to demonstrate the use of the Simulator to generate detailed annual sub-hourly occupant schedules for individual spaces and the whole building. The Simulator is a web application freely available to the public and capable of performing a detailed stochastic simulation of occupant presence and movement in buildings. Future work includes enhancements in the meeting event model, consideration of personal absent days, verification and validation of the simulated occupancy results, and expansion for use with residential buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Developing Soret Transport Coefficients for Lanthanides from Experimental Results

Understanding the nature of lanthanide transport in metallic fuels and its relation to fuel clad chemical interaction (FCCI) has been has been a topic that is long on interest and short on data. Recent experiments have shown a strong temperature-gradient based diffusion (Soret diffusion) and have thus provided vitally important information for modelers. However, details about the actual coefficients and many of the relevant processes that crucially participate in the cerium migration and precipitation process have not yet been disclosed. Using a combination of computing tools (primarily python and BISON) we are exploring methods that may extract useful information from visual data. In this specific example, we are using what is formally called 'blob detection' algorithms to analyzed the precipitate distribution of cerium in a U-Zr metal that has had a fixed temperature gradient enforced upon it for a specified period of time. These algorithms, once properly adapted to the problem at hand, may be useful at extracting information from radial and axial scans of metallic fuels which are much more abundant than direct measurements of lanthanides. We have developed a model that qualitatively works to move mass along a temperature gradient and precipitate heavily in the cold regions. Additionally, we have observed that the solubility of cerium in U-Zr held under this kind of temperature gradient is subject to some amount of U-Zr constituent redistribution. Our results predict movement of the Zr toward the hot end of the rod followed by a U-rich layer with the cooler 3/5 of the rod staying close the the initial U-Zr distribution. A more complete analysis will define groups of correlated parameters that correctly simulate the resulting distribution of precipitates. This restricted parameters space will give smaller bounds to modelers and will expedite the analysis of future works as new and more accurate data are made available. A follow-up experiment that started with 1/10 of the initial concentration of cerium may provide valuable additional information with regard to the effect of the rates of precipitation and dissolution as well as demonstrating the potential rapidity of migration in a lower burnup scenario. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of hydrodynamical-simulation–inspired dark matter velocity profile on directional detection of dark matter

Directional detection is an important way to detect dark matter. An input for these experiments is the dark matter velocity distribution. Recent hydrodynamical simulations have shown that the dark matter velocity distribution differs substantially from the Standard Halo Model. We study the impact of some of these updated velocity distributions in dark matter directional detection experiments. Here, we calculate the ratio of events required to confirm the forward-backward asymmetry and the existence of the ring of maximum recoil rate using different dark matter velocity distributions for 19 F and Xe targets. We show that with the use of updated dark matter velocity profiles, the forward-backward asymmetry and the ring of maximum recoil rate can be confirmed using a factor of ~ 2– 3 less events when compared to that using the Standard Halo Model.

79 ASTRONOMY AND ASTROPHYSICS↗

Organic scintillation detector response simulation using non-analog MCNPX-PoliMi

Organic liquid scintillation detectors are valuable for the detection of special nuclear material since they are capable of detecting both neutrons and gamma rays. Scintillators can also provide energy information which is helpful in identification and characterization of the source. In order to design scintillation based measurement systems appropriate simulation tools are needed. MCNPX-PoliMi is capable of simulating scintillation detector response; however, simulations have traditionally been run in analog mode which leads to long computation times. In this paper, non-analog MCNPX-PoliMi mode which uses variance reduction techniques is applied and tested. The non-analog MCNPX-PoliMi simulation test cases use source biasing, geometry splitting and a combination of both variance reduction techniques to efficiently simulate pulse height distribution and then time-of-flight for a heavily shielded case with a {sup 252}Cf source. An improvement factor (I), is calculated for distributions in each of the three cases above to analyze the effectiveness of the non-analog MCNPX-PoliMi simulations in reducing computation time. It is found that of the three cases, the last case which uses a combination of source biasing and geometry splitting shows the most improvement in simulation run time for the same desired variance. For pulse height distributions speedup ranging from a factor 5 to 25 is observed, while for time-of-flights the speedup factors range from 3 to 10. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Decline and poleward shift in Indian summer monsoon synoptic activity in a warming climate

Cyclonic atmospheric vortices of varying intensity, collectively known as low-pressure systems (LPS), travel northwest across central India and produce more than half of the precipitation received by that fertile region and its ~600 million inhabitants. Yet, future changes in LPS activity are poorly understood, due in part to inadequate representation of these storms in current climate models. Using a high-resolution atmospheric general circulation model that realistically simulates the genesis distribution of LPS, here we show that Indian monsoon LPS activity declines about 45% by the late 21st century in simulations of a business-as-usual emission scenario. The distribution of LPS genesis shifts poleward as it weakens, with oceanic genesis decreasing by ~60% and continental genesis increasing by ~10%; over land the increase in storm counts is accompanied by a shift toward lower storm wind speeds. The weakening and poleward shift of the genesis distribution in a warmer climate are confirmed and attributed, via a statistical model, to the reduction and poleward shift of low-level absolute vorticity over the monsoon region, which in turn are robust features of most coupled model projections. The poleward shift in LPS activity results in an increased frequency of extreme precipitation events over northern India.

54 ENVIRONMENTAL SCIENCES↗

An experimental investigation of control surface effectiveness and real-gas simulation for biconics

Aerodynamic coefficients, pressure distributions, and oil-flow patterns measured on spherically blunted, 13 degrees/7 degrees on-axis and bent biconics at Mach 6 and 10 in air are compared. Angle of attack, referenced to the axis of the aft cone, was varied from zero to 40 degrees. The effect of deflection of base-mounted flaps on aerodynamic characteristics was examined at Mach 10. Real-gas effects on aerodynamic coefficients, pressure distributions and shock detachment distance were simulated by testing the biconic models in Mach 6 air and Mach 6 CF4 flows. (Density ratio equal to 5.3 for air and 12 for CF4.) The on-axis biconic is stable but cannot be trimmed at angles of attack above zero with the assumed center of gravity and flap configuration. Flaps on the bent biconic produced a stable and trim configuration for angles of attack from zero to 23 degrees. A significant effect of density ratio on aerodynamic coefficients, pressure distribution, and shock detachment distance was observed.

Miller, C. G.↗

Defining and Enabling Resiliency of Electric Distribution Systems With Multiple Microgrids

This paper presents a method for quantifying and enabling the resiliency of a power distribution system (PDS) using analytical hierarchical process and percolation theory. Using this metric, quantitative analysis can be done to analyze the impact of possible control decisions to pro-actively enable the resilient operation of distribution system with multiple microgrids and other resources. Developed resiliency metric can also be used in short term distribution system planning. The benefits of being able to quantify resiliency can help distribution system planning engineers and operators to justify control actions, compare different reconfiguration algorithms, develop proactive control actions to avert power system outage due to impending catastrophic weather situations or other adverse events. Validation of the proposed method is done using modified CERTS microgrids and a modified industrial distribution system. Furthermore, simulation results show topological and composite metric considering power system characteristics to quantify the resiliency of a distribution system with the proposed methodology, and improvements in resiliency using two-stage reconfiguration algorithm and multiple microgrids.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Effect of Distribution of Basket-Hole Area on Simulated Altitude Performance of 25 1/2-Inch-Diameter Annular-Type Turbojet Combustor

A simulated altitude performance of a 25 1/2-inch-diameter annular-type turbojet combustor was performed to determine the effect of the distribution of basket-hole area on the altitude operational limits of the engine as imposed by the combustor.Total pressure drop was recorded, as well as the effect of fuel-nozzle flow capacity,and fuel-nozzle spray angle for one basket configuration. General observations were made for all configurations regarding flames, extent of afterburning, and durability of the baskets.

Olson, Walter T.↗

Satellite alignment. I. Distribution of substructures and their dependence on assembly history from n-body simulations

Observations have shown that the spatial distribution of satellite galaxies is not random, but aligned with the major axes of central galaxies. This alignment is dependent on galaxy properties, such that red satellites are more strongly aligned than blue satellites. Theoretical work conducted to interpret this phenomenon has found that it is due to the non-spherical nature of dark matter halos. However, most studies overpredict the alignment signal under the assumption that the central galaxy shape follows the shape of the host halo. It is also not clear whether the color dependence of alignment is due to an assembly bias or an evolution effect. In this paper we study these problems using a cosmological N-body simulation. Subhalos are used to trace the positions of satellite galaxies. It is found that the shapes of dark matter halos are mis-aligned at different radii. If the central galaxy shares the same shape as the inner host halo, then the alignment effect is weaker and agrees with observational data. However, it predicts almost no dependence of alignment on the color of satellite galaxies, though the late accreted subhalos show stronger alignment with the outer layer of the host halo than their early accreted counterparts. We find that this is due to the limitation of pure N-body simulations where satellite galaxies without associated subhalos ('orphan galaxies') are not resolved. These orphan (mostly red) satellites often reside in the inner region of host halos and should follow the shape of the host halo in the inner region.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulator of Non-homogenous Alumina and Current Distribution in an Aluminum Electrolysis Cell to Predict Low-Voltage Anode Effects

Perfluorocarbons are important contributors to aluminum production greenhouse gas inventories. Tetrafluoromethane and hexafluoroethane are produced in the electrolysis process when a harmful event called anode effect occurs in the cell. This incident is strongly related to the lack of alumina and the current distribution in the cell and can be classified into two categories: high-voltage and low-voltage anode effects. The latter is hard to detect during the normal electrolysis process and, therefore, new tools are necessary to predict this event and minimize its occurrence. This paper discusses a new approach to model the alumina distribution behavior in an electrolysis cell by dividing the electrolytic bath into non-homogenous concentration zones using discrete elements. The different mechanisms related to the alumina distribution are discussed in detail. Moreover, with a detailed electrical model, it is possible to calculate the current distribution among the different anodic assemblies. With this information, the model can evaluate if low-voltage emissions are likely to be present under the simulated conditions. Using the simulator will help the understanding of the role of the alumina distribution which, in turn, will improve the cell energy consumption and stability while reducing the occurrence of high- and low-voltage anode effects.

36 MATERIALS SCIENCE↗

A Method for Obtaining High Frequency, Global, IR-Based Convective Cloud Tops for Studies of the TTL

Models of varying complexity that simulate water vapor and clouds in the Tropical Tropopause Layer (TTL) show that including convection directly is essential to properly simulating the water vapor and cloud distribution. In boreal winter, for example, simulations without convection yield a water vapor distribution that is too uniform with longitude, as well as minimal cloud distributions. Two things are important for convective simulations. First, it is important to get the convective cloud top potential temperature correctly, since unrealistically high values (reaching above the cold point tropopause too frequently) will cause excessive hydration of the stratosphere. Second, one must capture the time variation as well, since hydration by convection depends on the local relative humidity (temperature), which has substantial variation on synoptic time scales in the TTL. This paper describes a method for obtaining high frequency (3-hourly) global convective cloud top distributions which can be used in trajectory models. The method uses rainfall thresholds, standard IR brightness temperatures, meteorological temperature analyses, and physically realistic and documented corrections IR brightness temperature corrections to derive cloud top altitudes and potential temperatures. The cloud top altitudes compare well with combined CLOUDSAT and CALIPSO data, both in time-averaged overall vertical and horizontal distributions and in individual cases (correlations of .65-.7). An important finding is that there is significant uncertainty (nearly .5 km) in evaluating the statistical distribution of convective cloud tops even using lidar. Deep convection whose tops are in regions of high relative humidity (such as much of the TTL), will cause clouds to form above the actual convection. It is often difficult to distinguish these clouds from the actual convective cloud due to the uncertainties of evaluating ice water content from lidar measurements. Comparison with models show that calculated cloud top altitudes are generally higher than those calculated by global analyses (e.g., MERRA). Interannual variability in the distribution of convective cloud top altitudes is also investigated.

hydration↗

Multiplicity distributions in interaction models used for cascade simulations

In cascade simulations, conservation of energy is of paramount importance. It is pointed out that it is possible to construct algorithms in which energies of secondaries are chosen from physically correct distributions in such a way as to conserve energy, and give physically correct multiplicity distributions without further adjustment. The resulting non-Poissonian nature of the distribution and the approximate KNO scaling are related to the large fluctuations in the energy available for pion production and to the detailed shape of the inclusive momentum distribution. Two multiparticle production algorithms are described which have these features. One is the algorithm used in the simulation of C jets, the other is for a hadron-nucleus interaction model used in the calculation of muon and neutrino fluxes.

Ellsworth, R. W.↗

ORIGIN OF CHEMICAL AND DYNAMICAL PROPERTIES OF THE GALACTIC THICK DISK

We adopt a scenario in which the Galactic thick disk was formed by minor merging between the first generation of the Galactic thin disk (FGTD) and a dwarf galaxy about {approx}9 Gyr ago and thereby investigate chemical and dynamical properties of the Galactic thick disk. In this scenario, the dynamical properties of the thick disk have long been influenced both by the mass growth of the second generation of the Galactic thin disk (i.e., the present thin disk) and by its non-axisymmetric structures. On the other hand, the early star formation history and chemical evolution of the thin disk was influenced by the remaining gas of the thick disk. Based on N-body simulations and chemical evolution models, we investigate the radial metallicity gradient, structural and kinematical properties, and detailed chemical abundance patterns of the thick disk. Our numerical simulations show that the ancient minor merger event can significantly flatten the original radial metallicity gradient of the FGTD, in particular, in the outer part, and also can be responsible for migration of inner metal-rich stars into the outer part (R > 10 kpc). The simulations show that the central region of the thick disk can develop a bar due to dynamical effects of a separate bar in the thin disk. Whether or not rotational velocities (V{sub {phi}}) can correlate with metallicities ([Fe/H]) for the simulated thick disks depends on the initial metallicity gradients of the FGTDs. The simulated orbital eccentricity distributions in the thick disk for models with higher mass ratios ({approx}0.2) and lower orbital eccentricities ({approx}0.5) of minor mergers are in good agreement with the corresponding observations. The simulated V{sub {phi}}-|z| relation of the thick disk in models with low orbital inclination angles of mergers are also in good agreement with the latest observational results. The vertical metallicity gradient of the simulated thick disk is rather flat or very weakly negative in the solar neighborhood. Our Galactic chemical evolution models show that if we choose two distinctive timescales for star formation in the thin and thick disks, then the models can explain both the observed metallicity distribution functions and correlations between [Mg/Fe] and [Fe/H] for the two disks in a self-consistent manner. We discuss how the early star formation history and chemical evolution of the Galactic thin disk can be influenced by the pre-existing thick disk.

79 ASTRONOMY AND ASTROPHYSICS↗

DOES GALACTIC MAGNETIC FIELD DISTURB THE CORRELATION OF THE HIGHEST ENERGY COSMIC RAYS WITH THEIR SOURCES?

The propagation trajectories of the highest energy cosmic rays (HECRs) are deflected by not only intergalactic magnetic field but also Galactic magnetic field (GMF). These magnetic fields can weaken the positive correlation between the arrival directions of HECRs and the positions of their sources. In order to explore the effect of GMF on the expected correlation, we simulate the arrival distribution of protons with energy above 6 x 10{sup 19} eV taking several GMF models into account, and then test the correlation between the protons and their sources assumed in the simulation. The dependence of the correlation signals on GMF models is also investigated. The correlation can be observed by accumulating {approx}200 protons in a half-hemisphere. The typical angular scale at which the positive signal of the correlation is maximized depends on the spiral component of the GMF model. That angular scale is {approx}5{sup 0} for bisymmetric spiral (BS) GMF models and {approx}7{sup 0} for axisymmetric spiral (AS) GMF models if the number density of HECR sources, n{sub s} , is {approx}10{sup -4} Mpc{sup -3}. An additional vertical (dipole) component of GMF affects these angular scales by 0.{sup 0}5-1{sup 0}. The difference between the correlation signal for the BS models and that for the AS models is prominent in the northern sky. The significance of the positive correlation depends on source distribution. The probability that the number of simulated HECR events correlating with sources is smaller than the number of random events correlating with the same sources by chance is much less than 10{sup -3} ({approx}3{sigma}) in almost all the source distributions with n{sub s} = 10{sup -4} Mpc{sup -3} for detection of under 200 protons, but {approx}10% of source distributions predict a chance probability more than 10{sup -3} in the AS GMF model. In addition, we also briefly discuss the effect of GMF for heavy-nuclei-dominated composition.

79 ASTRONOMY AND ASTROPHYSICS↗