Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Differences in Effective Target Volume Between Various Techniques of Accelerated Partial Breast Irradiation

Purpose: Different cavity expansions are used to define the clinical target volume (CTV) for accelerated partial breast irradiation (APBI) delivered via balloon brachytherapy (1 cm) vs. three-dimensional conformal radiotherapy (3D-CRT) (1.5 cm). Previous studies have argued that the CTVs generated by these different margins are effectively equivalent. In this study, we use deformable registration to assess the effective CTV treated by balloon brachytherapy on clinically representative 3D-CRT planning images. Methods and Materials: Ten patients previously treated with the MammoSite were studied. Each patient had two computed tomography (CT) scans, one acquired before and one after balloon implantation. In-house deformable registration software was used to deform the MammoSite CTV onto the balloonless CT set. The deformed CTV was validated using anatomical landmarks common to both CT scans. Results: The effective CTV treated by the MammoSite was on average 7% {+-} 10% larger and 38% {+-} 4% smaller than 3D-CRT CTVs created using uniform expansions of 1 and 1.5 cm, respectively. The average effective CTV margin was 1.0 cm, the same as the actual MammoSite CTV margin. However, the effective CTV margin was nonuniform and could range from 5 to 15 mm in any given direction. Effective margins <1 cm were attributable to poor cavity-balloon conformance. Balloon size relative to the cavity did not significantly correlate with the effective margin. Conclusion: In this study, the 1.0-cm MammoSite CTV margin treated an effective volume that was significantly smaller than the 3D-CRT CTV based on a 1.5-cm margin.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Sex-dependent Differences in Intestinal Tumorigenesis Induced in Apc1638N/+ Mice by Exposure to {gamma} Rays

Purpose: The purpose of the present study was to assess the effect of 1 and 5 Gy radiation doses and to investigate the interplay of gender and radiation with regard to intestinal tumorigenesis in an adenomatous polyposis coli (APC) mutant mouse model. Methods and Materials: Apc1638N/+ female and male mice were exposed whole body to either 1 Gy or 5 Gy of {gamma} rays and euthanized when most of the treated mice became moribund. Small and large intestines were processed to determine tumor burden, distribution, and grade. Expression of proliferation marker Ki-67 and estrogen receptor (ER)-{alpha} were also assessed by immunohistochemistry. Results: We observed that, with both 1 Gy and 5 Gy of {gamma} rays, females displayed reduced susceptibility to radiation-induced intestinal tumorigenesis compared with males. As for radiation effect on small intestinal tumor progression, although no substantial differences were found in the relative frequency and degree of dysplasia of adenomas in irradiated animals compared with controls, invasive carcinomas were found in 1-Gy- and 5-Gy-irradiated animals. Radiation exposure was also shown to induce an increase in protein levels of proliferation marker Ki-67 and sex-hormone receptor ER-{alpha} in both non tumor mucosa and intestinal tumors from irradiated male mice. Conclusions: We observed important sex-dependent differences in susceptibility to radiation-induced intestinal tumorigenesis in Apc1638N/+ mutants. Furthermore, our data provide evidence that exposure to radiation doses as low as 1 Gy can induce a significant increase in intestinal tumor multiplicity as well as enhance tumor progression in vivo.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Phantom and Clinical Study of Differences in Cone Beam Computed Tomographic Registration When Aligned to Maximum and Average Intensity Projection

Purpose: To determine whether maximum or average intensity projection (MIP or AIP, respectively) reconstructed from 4-dimensional computed tomography (4DCT) is preferred for alignment to cone beam CT (CBCT) images in lung stereotactic body radiation therapy. Methods and Materials: Stationary CT and 4DCT images were acquired with a target phantom at the center of motion and moving along the superior–inferior (SI) direction, respectively. Motion profiles were asymmetrical waveforms with amplitudes of 10, 15, and 20 mm and a 4-second cycle. Stationary CBCT and dynamic CBCT images were acquired in the same manner as stationary CT and 4DCT images. Stationary CBCT was aligned to stationary CT, and the couch position was used as the baseline. Dynamic CBCT was aligned to the MIP and AIP of corresponding amplitudes. Registration error was defined as the SI deviation of the couch position from the baseline. In 16 patients with isolated lung lesions, free-breathing CBCT (FBCBCT) was registered to AIP and MIP (64 sessions in total), and the difference in couch shifts was calculated. Results: In the phantom study, registration errors were within 0.1 mm for AIP and 1.5 to 1.8 mm toward the inferior direction for MIP. In the patient study, the difference in the couch shifts (mean, range) was insignificant in the right-left (0.0 mm, ≤1.0 mm) and anterior–posterior (0.0 mm, ≤2.1 mm) directions. In the SI direction, however, the couch position significantly shifted in the inferior direction after MIP registration compared with after AIP registration (mean, −0.6 mm; ranging 1.7 mm to the superior side and 3.5 mm to the inferior side, P=.02). Conclusions: AIP is recommended as the reference image for registration to FBCBCT when target alignment is performed in the presence of asymmetrical respiratory motion, whereas MIP causes systematic target positioning error.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Immunophenotypic and Clinical Differences Between the Nasal and Extranasal Subtypes of Upper Aerodigestive Tract Natural Killer/T-Cell Lymphoma

Purpose: To investigate, in a large cohort of patients, the immunophenotypic and clinical differences of nasal and extranasal extranodal nasal-type natural killer/T-cell lymphoma of the upper aerodigestive tract (UADT-NKTCL) and examine the relevance of the immunophenotype on the clinical behavior, prognosis, and treatment. Methods and Materials: A total of 231 patients with UADT-NKTCL were recruited. One hundred eighty-one patients had primary location in the nasal cavity (nasal UADT-NKTCL), and 50 patients had primary extranasal UADT-NKTCL. Results: Patients with extranasal UADT-NKTCL had more adverse clinical features, including advanced-stage disease, regional lymph node involvement, B symptoms, and poor performance status, than patients with nasal UADT-NKTCL. In addition, CD56 and granzyme B were less frequently expressed in extranasal UADT-NKTCL. The 5-year overall survival rate was 74.1% for the entire group and 76.0% for early-stage disease. The 5-year overall survival rate for extranasal UADT-NKTCL was similar or superior to that of nasal UADT-NKTCL for all disease stages (76.9% vs 73.4%, P=.465), stage I disease (75.9% vs 79.2%, P=.786), and stage II disease (83.3% vs 50.3%, P=.018). CD56 expression and a Ki-67 proliferation rate ≥50% predicted poorer survival for extranasal UADT-NKTCL but not for nasal UADT-NKTCL. Conclusions: Patients with nasal and extranasal UADT-NKTCL have significantly different clinical features, immunophenotypes, and prognosis. Extranasal UADT-NKTCL should be considered as a distinct subgroup apart from the most commonly diagnosed prototype of nasal UADT-NKTCL.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Hematologic Toxicity in Patients Treated With Postprostatectomy Whole-Pelvis Irradiation With Different Intensity Modulated Radiation Therapy Techniques Is Not Negligible and Is Prolonged: Preliminary Results of a Longitudinal, Observational Study

Purpose: To address the thus-far poorly investigated severity and duration of hematologic toxicity from whole-pelvis radiation therapy (WPRT) in a cohort of chemo-naïve patients treated with postprostatectomy radiation therapy including WPRT with different intensity modulated radiation therapy (IMRT) techniques, doses, and fractionations. Methods and Materials: This analysis pertains to 125 patients (70 from a pilot study and 55 from an observational protocol) for whom 1 baseline and at least 3 subsequent blood samples (median 6), obtained at irradiation midpoint and end, and thereafter at 3, 6, and 12 months, were available. Patients were treated with adjuvant (n=73) or salvage intent; static-field IMRT (n=19); volumetric modulated arc therapy (n=60) or helical Tomotherapy (n=46); and conventional (n=39) or moderately hypofractionated (median 2.35 Gy per fraction, n=86) regimens. The median 2-Gy equivalent dose (EQD2) to the prostatic bed was 70.4 Gy with a lymph-nodal planning target volume of 50.2 Gy. Clinical and dosimetric data were collected. Results: Both leukopenia and thrombocytopenia were significant (median nadir count 65% and 67% of baseline, respectively), with leukopenia also persisting (1-year median count 75% of baseline). Lymphopenia was the major contributor to the severity and 1-year persistence of leukopenia; all patients developed acute grade ≥1 lymphopenia (61% and 26% grade 2 and ≥3, respectively), whereas 1-year grade ≥2 lymphopenia was still present in 16%. In addition to an independent predictive role of corresponding baseline values, multivariable analyses highlighted that higher EQD2 doses to lymph nodal planning target volume increased risk of acute neutropenia and hypofractionation for acute thrombocytopenia. Of note, patients of older age were at higher risk for acute grade 2 lymphopenia, and interestingly, increased risk of grade >2 lymphopenia for those who smoked at least one year. No role for different IMRT techniques indicated. Conclusions: Leukopenia and lymphopenia after postprostatectomy WPRT were found to be less negligible and more prolonged than expected. A number of radiation-related and clinical factors favoring hematologic toxicity, whose awareness may be crucial when prescribing WPRT, in particular if concomitant to chemotherapy, were identified.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Quality of Life in Women Undergoing Breast Irradiation in a Randomized, Controlled Clinical Trial Evaluating Different Tumor Bed Boost Fractionations

Purpose: To identify differences in breast cancer patient-reported quality of life (QOL) between 2 radiation tumor bed boost dose regimens. Methods and Materials: Four hundred patients with stage 0, I, or II breast cancer who underwent segmental mastectomy with sentinel node biopsy and/or axillary node dissection were treated with either a daily or weekly boost. Patients were treated prone to 40.5 Gy/15 fractions to the whole breast, 5 days per week. Patients were randomized to a concomitant daily boost to the tumor bed of 0.5 Gy, or a weekly boost of 2 Gy on Friday. Patients completed 6 validated QOL survey instruments at baseline, last week of treatment (3 weeks), 45-60 days from the completion of radiation treatment, and at 2-year follow-up. Results: There were no statistically significance differences in responses to the 6 QOL instruments between the daily and weekly radiation boost regimens, even after adjustment for important covariates. However, several changes in responses over time occurred in both arms, including worsening functional status, cosmetic status, and breast-specific pain at the end of treatment as compared with before and 45 to 60 days after the conclusion of treatment. Conclusions: Whole-breast, prone intensity modulated radiation has similar outcomes in QOL measures whether given with a daily or weekly boost. This trial has generated the foundation for a current study of weekly versus daily radiation boost in women with early breast cancer in which 3-dimensional conformal radiation is allowed as a prospective stratification factor.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Stereotactic Ablative Radiation Therapy Induces Systemic Differences in Peripheral Blood Immunophenotype Dependent on Irradiated Site

Despite the strong interest in combining stereotactic ablative radiation therapy (SAR) with immunotherapy, limited data characterizing the systemic immune response after SAR are available. We hypothesized that the systemic immune response to SAR would differ by irradiated site owing to inherent differences in the microenvironment of various organs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Beneficial effect of surfactant in adsorption/desorption of lignocellulose-degrading enzymes on/from lignin with different structure

Nonionic surfactant Tween 80 is effective in alleviating the adsorption of lignocellulose-degrading enzymes onto lignin. However, the impacts of lignin structural characteristics on this mitigation effect of Tween 80 were still not clear. Herein, effects of Tween 80 on cellulase and xylanase adsorption on different enzymatic residual lignins (ERLs) and poplar samples were investigated. Besides, effects of Tween 80 on desorption of the two enzyme preparations from different ERLs and poplar samples were also evaluated. By adding Tween 80, the inhibition of ERLs to cellulase hydrolysis was offset and the positive role of Tween 80 in Avicel hydrolysis with presence of ERLs was more effective. Binding strength of cellulase with ERLs was alleviated from 236.0 – 410.9 to 43.9 – 116.6 mL/g after adding 0.5 mg/mL Tween 80. When ERLs was more hydrophobic and had more condensed phenolic OH, the alleviation effect of Tween 80 on cellulase adsorption on ERLs was intensified but its positive effect on enhancing cellulase desorption was weakened. Tween 80 was effective in increasing xylanase activity and preventing xylanase deactivation. Further, with the increase of lignin content and phenolic OH in pretreated poplar, the effect of Tween 80 in alleviating xylanase adsorption on poplar samples was intensified but the effect in enhancing xylanase desorption from poplar samples was weakened. The results provided distinct findings to understand the interaction between Tween 80 and cellulase/xylanase in enzymatic saccharification of lignocelluloses.

59 BASIC BIOLOGICAL SCIENCES↗

The local structural differences in amorphous Ge-Sb-Te alloys

Chalcogenide alloys in pseudobinary line between Sb 2 Te 3 and GeTe are extensively utilied in phase change memories for optical and electronic contrast between crystalline and amorphous phases. Different from the crystalline structure, the understanding of amorphous structures is still insufficient due to disorder and distortion. By employing first-principle molecular dynamics simulations and atomistic cluster alignment analysis, the short-range orders and the associated distortions of amorphous Sb 2 Te 3 , Ge 1 Sb 2 Te 4 , Ge 2 Sb 2 Te 5 , Ge 3 Sb 2 Te 6 and GeTe are investigated to explore the origin of nature difference. The results reveal that Gesingle bondGe and Sbsingle bondSb bonds present a notable competitive mechanism with GeTe content. The GeTe content has a great influence on Ge- and Te-centered short-range orders but little influence on the structures of Sb-centered clusters, especially for the octahedral sites and unidentified structures. The tetrahedrons in Ge-centered clusters of each alloy show a close proportion, but the fraction of tetrahedrons in total clusters increases with the increasing GeTe content due to the increase in the ratio of Ge atom. As for the distortions of clusters, the distorted tetrahedrons in Ge 2 Sb 2 Te 5 are closest to the standard tetrahedron, the Peierls distortion of Ge-centered 6-fold octahedron reduces with an increase in GeTe content whereas that of Sb-centered 6-fold octahedron shows a little change. Also, it is found that GeTe content can inhibit the formation of nanocavity but contribute to the formation of the odd rings. Our findings deepens the understanding of amorphous structures, which can promote the design and application of phase-change materials.

36 MATERIALS SCIENCE↗

Life cycle greenhouse gas emissions of different CO 2 supply options for an algal biorefinery

This paper characterizes the greenhouse gas (GHG) emissions from the provision of CO 2 for twelve hours of the day from a range of sources operating on a twenty-four-hour basis. Twelve CO 2 supply cases spanning from fossil fuel power plant stack gases to direct air capture (DAC) systems are modeled. The results are compared in a life cycle assessment (LCA) framework. The CO 2 supply from the combustion or gasification of biomass has GHG emissions of –1.62 gCO 2 eq./g CO 2 delivered and is the case with the lowest carbon footprint for supplied CO2. The emissions for all the CO 2 supply cases were found to be negative, either because of capturing more CO 2 from the atmosphere than is released from the CO 2 production process, or because of production of excess electricity that is exported to the grid (replacing emissions from grid electricity). A purpose-built Natural Gas Combined Cycle (NGCC) power plant CO 2 source has the highest GHG emissions of -0.40 gCO 2 eq./gCO 2 delivered of the cases considered because of nighttime emissions and natural gas supply chain losses. The impact of a diurnal cycle can be mitigated by using capture and refrigeration systems as part of the CO 2 management system. The results are sensitive to the GHG emissions of the grid electricity, which is imported or exported in different cases. The results provide a benchmark for the comparison of different CO 2 supply options for the establishment of a sustainable algal biorefinery.

42 ENGINEERING↗

High order finite difference methods with subcell resolution for advection equations with stiff source terms

A new high order finite-difference method utilizing the idea of Harten ENO subcell resolution method is proposed for chemical reactive flows and combustion. In reaction problems, when the reaction time scale is very small, e.g., orders of magnitude smaller than the fluid dynamics time scales, the governing equations will become very stiff. Wrong propagation speed of discontinuity may occur due to the underresolved numerical solution in both space and time. The present proposed method is a modified fractional step method which solves the convection step and reaction step separately. In the convection step, any high order shock-capturing method can be used. In the reaction step, an ODE solver is applied but with the computed flow variables in the shock region modified by the Harten subcell resolution idea. For numerical experiments, a fifth-order finite-difference WENO scheme and its anti-diffusion WENO variant are considered. A wide range of 1D and 2D scalar and Euler system test cases are investigated. Studies indicate that for the considered test cases, the new method maintains high order accuracy in space for smooth flows, and for stiff source terms with discontinuities, it can capture the correct propagation speed of discontinuities in very coarse meshes with reasonable CFL numbers.

97 MATHEMATICS AND COMPUTING↗

Comparison of different interpolation operators including nonlinear subdivision schemes in the simulation of particle trajectories

In this work, we compare different interpolation operators in the context of particle tracking with an emphasis on situations involving velocity field with steep gradients. Since, in this case, most classical methods give rise to the Gibbs phenomenon (generation of oscillations near discontinuities), we present new methods for particle tracking based on subdivision schemes and especially on the Piecewise Parabolic Harmonic (PPH) scheme which has shown its advantage in image processing in presence of strong contrasts. First an analytic univariate case with a discontinuous velocity field is considered in order to highlight the effect of the Gibbs phenomenon on trajectory calculation. Theoretical results are provided. Then, we show, regardless of the interpolation method, the need to use a conservative approach when integrating a conservative problem with a velocity field deriving from a potential. Finally, the PPH scheme is applied in a more realistic case of a time-dependent potential encountered in the edge turbulence of magnetically confined plasmas, to compare the propagation of density structures (turbulence bursts) with the dynamics of test particles. This study highlights the difference between particle transport and density transport in turbulent fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accelerating Monte Carlo molecular simulations by reweighting and reconstructing Markov chains: Extrapolation of canonical ensemble averages and second derivatives to different temperature and density conditions

Accurate determination of thermodynamic properties of petroleum reservoir fluids is of great interest to many applications, especially in petroleum engineering and chemical engineering. Molecular simulation has many appealing features, especially its requirement of fewer tuned parameters but yet better predicting capability; however it is well known that molecular simulation is very CPU expensive, as compared to equation of state approaches. We have recently introduced an efficient thermodynamically consistent technique to regenerate rapidly Monte Carlo Markov Chains (MCMCs) at different thermodynamic conditions from the existing data points that have been pre-computed with expensive classical simulation. This technique can speed up the simulation more than a million times, making the regenerated molecular simulation almost as fast as equation of state approaches. In this paper, this technique is first briefly reviewed and then numerically investigated in its capability of predicting ensemble averages of primary quantities at different neighboring thermodynamic conditions to the original simulated MCMCs. Moreover, this extrapolation technique is extended to predict second derivative properties (e.g. heat capacity and fluid compressibility). The method works by reweighting and reconstructing generated MCMCs in canonical ensemble for Lennard-Jones particles. In this paper, system's potential energy, pressure, isochoric heat capacity and isothermal compressibility along isochors, isotherms and paths of changing temperature and density from the original simulated points were extrapolated. Finally, an optimized set of Lennard-Jones parameters (ε, σ) for single site models were proposed for methane, nitrogen and carbon monoxide.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wave propagation in anisotropic elastic materials and curvilinear coordinates using a summation-by-parts finite difference method

We develop a fourth order accurate finite difference method for solving the three-dimensional elastic wave equation in general heterogeneous anisotropic materials on curvilinear grids. The proposed method is an extension of the method for isotropic materials, previously described in the paper by Sjögreen and Petersson (2012) [11]. The method we proposed discretizes the anisotropic elastic wave equation in second order formulation, using a node centered finite difference method that satisfies the principle of summation by parts. The summation by parts technique results in a provably stable numerical method that is energy conserving. Also, we generalize and evaluate the super-grid far-field technique for truncating unbounded domains. Unlike the commonly used perfectly matched layers (PML), the super-grid technique is stable for general anisotropic material, because it is based on a coordinate stretching combined with an artificial dissipation. Moreover, the discretization satisfies an energy estimate, proving that the numerical approximation is stable. We demonstrate by numerical experiments that sufficiently wide super-grid layers result in very small artificial reflections. Applications of the proposed method are demonstrated by three-dimensional simulations of anisotropic wave propagation in crystals.

58 GEOSCIENCES↗

Seismic modeling with radial basis function-generated finite differences (RBF-FD) – a simplified treatment of interfaces

In a previous study of seismic modeling with radial basis function-generated finite differences (RBF-FD), we outlined a numerical method for solving 2-D wave equations in domains with material interfaces between different regions. The method was applicable on a mesh-free set of data nodes. It included all information about interfaces within the weights of the stencils (allowing the use of traditional time integrators), and was shown to solve problems of the 2-D elastic wave equation to 3rd-order accuracy. In the present paper, we discuss a refinement of that method that makes it simpler to implement. It can also improve accuracy for the case of smoothly-variable model parameter values near interfaces. We give several test cases that demonstrate the method solving 2-D elastic wave equation problems to 4th-order accuracy, even in the presence of smoothly-curved interfaces with jump discontinuities in the model parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single-cone finite difference scheme for the (2+1)D Dirac von Neumann equation

An explicit finite difference scheme is presented for the von Neumann equation for (2+1)D Dirac fermions. It is founded upon a staggered space–time grid which ensures a single-cone energy dispersion and performs the time-derivative in one sweep using a three-step leap-frog procedure. It enables a space–time-resolved numerical treatment of the mixed-state dynamics of Dirac fermions within the effective single-particle density matrix formalism. Energy-momentum dispersion, stability and convergence properties are derived. Elementary numerical tests to demonstrate stability properties use parameters which pertain to topological insulator surface states. A method for the simulation of charge injection from an electric contact is presented and tested numerically. Potential extensions of the scheme to a Dirac–Lindblad equation, real-space–time Green's function formulations, and higher-order finite-difference schemes are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Memory-optimized shift operator alternating direction implicit finite difference time domain method for plasma

Through introducing the alternating direction implicit (ADI) technique and the memory-optimized algorithm to the shift operator (SO) finite difference time domain (FDTD) method, the memory-optimized SO-ADI FDTD for nonmagnetized collisional plasma is proposed and the corresponding formulae of the proposed method for programming are deduced. In order to further the computational efficiency, the iteration method rather than Gauss elimination method is employed to solve the equation set in the derivation of the formulae. Complicated transformations and convolutions are avoided in the proposed method compared with the Z transforms (ZT) ADI FDTD method and the piecewise linear JE recursive convolution (PLJERC) ADI FDTD method. The numerical dispersion of the SO-ADI FDTD method with different plasma frequencies and electron collision frequencies is analyzed and the appropriate ratio of grid size to the minimum wavelength is given. The accuracy of the proposed method is validated by the reflection coefficient test on a nonmagnetized collisional plasma sheet. The testing results show that the proposed method is advantageous for improving computational efficiency and saving computer memory. The reflection coefficient of a perfect electric conductor (PEC) sheet covered by multilayer plasma and the RCS of the objects coated by plasma are calculated by the proposed method and the simulation results are analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Robust Approaches to Handling Complex Geometries with Galerkin Difference Methods

The Galerkin difference (GD) basis is a set of continuous, piecewise polynomials defined using a finite-difference-like grid of degrees of freedom. The one dimensional GD basis functions are naturally extended to multiple dimensions using a tensor product construction on quadrilateral elements. The GD basis can be used to define the solution space for a discontinuous Galerkin finite element discretization of partial differential equations. In this work we propose two approaches to handling complex geometries within this setting: (1) using nonconforming, curvilinear GD elements and (2) coupling affine GD elements with curvilinear simplicial elements. In both cases the (semidiscrete) discontinuous Galerkin method is provably energy stable even when variational crimes are committed. Additionally, for both element types a weight-adjusted mass matrix is used, which ensures that only the reference mass matrix must be inverted. We also present sufficient conditions on the treatment of metric terms for the curvilinear, nonconforming GD elements to ensure that the scheme is both constant preserving and conservative. Numerical experiments confirm the stability results and demonstrate the accuracy of the coupled schemes.

97 MATHEMATICS AND COMPUTING↗