SEARCH · Engineering Papers

Results for “density lithium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Analysis of redox additive-based overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection, has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. Digital simulation of the overcharge experiment leads to numerical representation of the potential transients, and estimate of the influence of diffusion coefficient and interelectrode distance on the transient attainment of the steady state during overcharge. The model has been experimentally verified using 1,1-prime-dimethyl ferrocene as a redox additive. The analysis of the experimental results in terms of the theory allows the calculation of the diffusion coefficient and the formal potential of the redox couple. The model and the theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗

NASA NTRS1991

Finite linear diffusion model for design of overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. The model has been experimentally verified using 1,1-prime-dimethylferrocene as a redox additive. The theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗

NASA NTRS2003

High-Energy Two-Stage Pulsed Plasma Thruster

A high-energy (28 kJ per pulse) two-stage pulsed plasma thruster (MSFC PPT-1) has been constructed and tested. The motivation of this project is to develop a high power (approximately 500 kW), high specific impulse (approximately 10000 s), highly efficient (greater than 50%) thruster for use as primary propulsion in a high power nuclear electric propulsion system. PPT-1 was designed to overcome four negative characteristics which have detracted from the utility of pulsed plasma thrusters: poor electrical efficiency, poor propellant utilization efficiency, electrode erosion, and reliability issues associated with the use of high speed gas valves and high current switches. Traditional PPTs have been plagued with poor efficiency because they have not been operated in a plasma regime that fully exploits the potential benefits of pulsed plasma acceleration by electromagnetic forces. PPTs have generally been used to accelerate low-density plasmas with long current pulses. Operation of thrusters in this plasma regime allows for the development of certain undesirable particle-kinetic effects, such as Hall effect-induced current sheet canting. PPT-1 was designed to propel a highly collisional, dense plasma that has more fluid-like properties and, hence, is more effectively pushed by a magnetic field. The high-density plasma loading into the second stage of the accelerator is achieved through the use of a dense plasma injector (first stage). The injector produces a thermal plasma, derived from a molten lithium propellant feed system, which is subsequently accelerated by the second stage using mega-amp level currents, which eject the plasma at a speed on the order of 100 kilometers per second. Traditional PPTs also suffer from dynamic efficiency losses associated with snowplow loading of distributed neutral propellant. The twostage scheme used in PPT-I allows the propellant to be loaded in a manner which more closely approximates the optimal slug loading. Lithium propellant was chosen to test whether or not the reduced electrode erosion found in the Lithium Lorentz Force Accelerator (LiLFA) could also be realized in a pulsed plasma thruster. The use of the molten lithium dense plasma injector also eliminates the need for a gas valve and electrical switch; the injector design fulfills both roles, and uses no moving parts to provide, in principle, a highly reliable propellant feed and electrical switching system. Experimental results reported in this paper include: second-stage current traces, high-speed photographic and holographic imaging of the thruster exit plume, and internal mapping of the discharge chamber magnetic field from B-dot probe data. The magnetic field data is used to create a two-dimensional description of the evolution of the current sheet inside the thruster.

Markusic, Tom↗

NASA NTRS2006

Single-Wall Carbon Nanotube Anodes for Lithium Cells

In recent experiments, highly purified batches of single-wall carbon nanotubes (SWCNTs) have shown promise as superior alternatives to the graphitic carbon-black anode materials heretofore used in rechargeable thin-film lithium power cells. The basic idea underlying the experiments is that relative to a given mass of graphitic carbon-black anode material, an equal mass of SWCNTs can be expected to have greater lithium-storage and charge/discharge capacities. The reason for this expectation is that whereas the microstructure and nanostructure of a graphitic carbon black is such as to make most of the interior of the material inaccessible for intercalation of lithium, a batch of SWCNTs can be made to have a much more open microstructure and nanostructure, such that most of the interior of the material is accessible for intercalation of lithium. Moreover, the greater accessibility of SWCNT structures can be expected to translate to greater mobilities for ion-exchange processes and, hence, an ability to sustain greater charge and discharge current densities.

Hepp, Aloysius F.↗

NASA NTRS2018

Aqueous, QUick-Charging Battery Integration For Electric Flight Research

AQUIFER establishes technical feasibility of an early-stage technology, a high-energy density, aqueous-based, flow battery, resulting in a near-term increase of 1.7 times range over an all-electric battery, while retiring fire and explosion hazards associated with lithium-based chemistries. The Nano-electrofuel (NEF) flow battery will be integrated with a rim-driven motor (RDM) as a multi-functional design to eliminate conductive EMI and weight from long cable runs, and provide liquid cooling from the aqueous fuel. When successful, the technology provides an improved safety energy storage solution for emission-free electric propulsion in commercial aviation.

power systems↗

DOE OSTI2020

The effects of vanadium substitution on one-dimensional tunnel structures of cryptomelane: Combined TEM and DFT study

Rational design of energy storage materials requires mechanistic understanding which relies on atomic scale characterization of structure and defects. In this paper we utilize vanadium (V)-substituted one-dimensional cryptomelane as a model material to study structural features critical to electrochemical reversibility of the cathode in lithium-ion batteries. We found the substitution of manganese (Mn) atoms in the tunnel wall with V enhances structural uniformity in the parent KMn 8 O 16 material by inhibiting formation of irregular (2 × 3 and 2 × 1) manganese oxide tunnel structures. Upon lithiation, both transmission electron microscopy (TEM) and density functional theory (DFT) reveal significant structural evolution, eventually resulting in phase separation and formation of highly reduced manganese oxide. During this process, Mn 4+ accepts electrons donated by intercalated Li, while the V 4+ substituent is not electrochemically reduced but acts to stabilize the tunnel framework structure. As a result, the V substituted material shows higher operating voltage and improved electrochemical reversibility. Our results highlight the benefits of V-substitution in cryptomelane, and the significance of integrating characterization with simulation for understanding and developing design principles for lithium ion battery materials.

25 ENERGY STORAGE↗

DOE OSTI2021

Modified bornite materials with high electrochemical performance for sodium and lithium storage

Mineral-based functional materials have attracted enormous attention due to the advantages of high production, good material consistency, environmental friendliness, and low cost. However, the efficient utilization of natural minerals for high-performance energy storage is rarely reported. Here, we demonstrate a mineral-derived anode material Cu 5 FeS 4 coated with carbon for both sodium-ion and lithium-ion batteries. The findings show that ball milling bornite in the presence of polyvinylpyrrolidone followed by optimal-temperature carbonization results in S, N-codoped Cu 5 FeS 4 particles with the desired surface properties, enhanced electronic conductivity, and abundant active sites that deliver high reversible capacity and maintain superior long-term cycling performance at a high current density of 2.0 A g –1 . This work sheds light on potential energy storage use cases for naturally abundant mineral-based materials.

25 ENERGY STORAGE↗

DOE OSTI2022

Carbon-Binder Weight Loading Optimization for Improved Lithium-Ion Battery Rate Capability

Battery performance is strongly correlated with electrode microstructure and weight loading of the electrode components. Among them are the carbon-black and binder additives that enhance effective conductivity and provide mechanical integrity. However, these both reduce effective ionic transport in the electrolyte phase and reduce energy density. Therefore, an optimal additive loading is required to maximize performance, especially for fast charging where ionic transport is essential. Such optimization analysis is however challenging due to the nanoscale imaging limitations that prevent characterizing this additive phase and thus quantifying its impact on performance. Herein, an additive-phase generation algorithm has been developed to remedy this limitation and identify percolation threshold used to define a minimal additive loading. Improved ionic transport coefficients from reducing additive loading has been then quantified through homogenization calculation, macroscale model fitting, and experimental symmetric cell measurement, with good agreement between the methods. Rate capability test demonstrates capacity improvement at fast charge at the beginning of life, from 37% to 55%, respectively for high and low additive loading during 6C CC charging, in agreement with macroscale model, and attributed to a combination of lower cathode impedance, reduced electrode tortuosity and cathode thickness.

25 ENERGY STORAGE↗

DOE OSTI2025

Lithium‐Containing Hybrid SEI Layer Enabling High Mass Loading and Anode‐Less Sodium Metal Batteries

Abstract The continuous rupturing and rebuilding of unstable solid electrolyte interphase (SEI) layer during cycling would block Na + diffusion and induce Na dendrite formation, ultimately limiting the practical application of high‐energy‐density sodium metal batteries. Herein, a hybrid SEI layer containing Li‐species is dexterously constructed on the surface of sodium metal anode. Li‐containing inorganic components (Li 3 N, LiF, and Li 2 CO 3 ) are introduced to stabilize the Na/electrolyte interface and enhance the mechanical and diffusion kinetic properties of the SEI layer, which can reduce the side reactions and gas generation, regulate Na + flux during cycling and promote rapid Na + migration for uniform dendrite‐free Na deposition. As a result, the constructed Na symmetric cells achieve low overpotential and long cycle life of 5900, 1800, and 500 h at current densities of 3, 10, and 30 mA cm −2 , respectively. Furthermore, the full cells paired with the Na₃V₂(PO₄)₃ cathode demonstrate high specific capacity and excellent cycle stability, even at an ultra‐high cathode loading of 39.3 mg cm −2 and a low N/P ratio (negative/positive electrode capacity ratio of 1.21).

Xia, Li [State Key Laboratory of Physical Chemistr↗

DOE OSTI2025

Lithium‐Containing Hybrid SEI Layer Enabling High Mass Loading and Anode‐Less Sodium Metal Batteries

The continuous rupturing and rebuilding of unstable solid electrolyte interphase (SEI) layer during cycling would block Na + diffusion and induce Na dendrite formation, ultimately limiting the practical application of high-energy-density sodium metal batteries. Herein, a hybrid SEI layer containing Li-species is dexterously constructed on the surface of sodium metal anode. Li-containing inorganic components (Li 3 N, LiF, and Li 2 CO 3 ) are introduced to stabilize the Na/electrolyte interface and enhance the mechanical and diffusion kinetic properties of the SEI layer, which can reduce the side reactions and gas generation, regulate Na + flux during cycling and promote rapid Na + migration for uniform dendrite-free Na deposition. As a result, the constructed Na symmetric cells achieve low overpotential and long cycle life of 5900, 1800, and 500 h at current densities of 3, 10, and 30 mA cm −2 , respectively. Furthermore, the full cells paired with the Na₃V₂(PO₄)₃ cathode demonstrate high specific capacity and excellent cycle stability, even at an ultra-high cathode loading of 39.3 mg cm −2 and a low N/P ratio (negative/positive electrode capacity ratio of 1.21).

Diffusion kinetic↗

DOE OSTI2020

Theoretical study of the electronic, thermodynamic, and thermo-conductive properties of y-LiAlO2 with 6Li isotope substitutions for tritium production

Lithium aluminate has attracted researchers’ interests due to its wide applications. The structural, electronic, optical, lattice phonon thermodynamic, and thermo-conductive properties of ?-LiAlO2 with 6Li-isotope substitution are investigated by density functional theory and lattice phonon dynamics. The calculated results show that ?-LiAlO2 possesses a wide band-gap of 4.63 eV. The valence band is mainly formed by p orbitals of Li, O, and Al. The calculated lattice thermal conductivity of ?-LiAlO2 is found to be in good agreement over a wide range of temperatures with the available experimental data. The calculated dielectric matrix shows anisotropic behavior along z and x (or y) axes. Due to the wide band-gap, the optical conductivity of ?-LiAlO2 is mainly contributed from the electron hopping between valence-conduction bands. Substitution of 7Li with 6Li isotope in ?-LiAlO2 leads to observable differences in the lattice phonon frequencies at higher frequencies (>8THz) and to slight changes in corresponding thermal conductivity and the infrared and Raman spectra which are in good agreement with the measured data. The relevance of these properties for tritium production through 6Li absorbing neutron in nuclear reactors is discussed.

ab initio thermodynamics, ?-LiAlO2 and 6Li-isotope↗

DOE OSTI2024

Random Copolymerization of Substituted Dioxolanes: Rational Design of High-Performance Polymer Electrolytes

Polymer electrolytes enhance the safety of lithium-ion battery systems, but current state-of-the-art poly(ethylene oxide)-based polymer electrolytes fail to achieve the electrochemical properties necessary for practical applications. We probed the impact of substituent density on the electrolyte performance by introducing methyl substituents into the backbone of a series of poly(1,3-dioxolane) (PDXL)-based copolymers. The polymerization of 1,3-dioxolane (DXL) and 4-methyl-1,3-dioxolane (MeDXL) yielded a series of random copolymers that were amorphous above 10% MeDXL incorporation. The copolymers with 10 and 20% MeDXL incorporation exhibited higher efficacies than those of either PDXL or poly(ethylene oxide) (PEO), highlighting the use of methyl substituents to control the electrochemical properties of polymer electrolytes.

Rugh, Haley J↗

DOE OSTI2022

Compositionally complex doping for zero-strain zero-cobalt layered cathodes

We report the high volatility of the price of cobalt and the geopolitical limitations of cobalt mining have made the elimination of Co a pressing need for the automotive industry. Owing to their high energy density and low-cost advantages, high-Ni and low-Co or Co-free (zero-Co) layered cathodes have become the most promising cathodes for next-generation lithium-ion batteries. However, current high-Ni cathode materials, without exception, suffer severely from their intrinsic thermal and chemo-mechanical instabilities and insufficient cycle life. Here, in this paper, by using a new compositionally complex (high-entropy) doping strategy, we successfully fabricate a high-Ni, zero-Co layered cathode that has extremely high thermal and cycling stability. Combining X-ray diffraction, transmission electron microscopy and nanotomography, we find that the cathode exhibits nearly zero volumetric change over a wide electrochemical window, resulting in greatly reduced lattice defects and local strain-induced cracks. In-situ heating experiments reveal that the thermal stability of the new cathode is significantly improved, reaching the level of the ultra-stable NMC-532. Owing to the considerably increased thermal stability and the zero volumetric change, it exhibits greatly improved capacity retention. This work, by resolving the long-standing safety and stability concerns for high-Ni, zero-Co cathode materials, offers a commercially viable cathode for safe, long-life lithium-ion batteries and a universal strategy for suppressing strain and phase transformation in intercalation electrodes.

25 ENERGY STORAGE↗

DOE OSTI2025

Key Factors in Semi-Generic Coarse-Grained Modeling of Solid Polymer Electrolytes

Given the long length and time scales of interest and strong interactions present in solid polymer electrolytes, coarse-grained molecular models can be useful in understanding the molecular basis of their structure and transport properties. Rather than representing atoms individually, coarse-grained models use beads representing groups of atoms, making the system simpler and more efficient. Generic coarse-grained models, that are not built based on matching a particular atomistic system, can provide insight into the important physical considerations that apply across different chemical systems, though it can be unclear how to best match to experimental systems and capture relevant experimental behaviors with as simple of a model as possible. Here, we build on generic bead-spring models, but use stiff angle potentials, set different bead properties for different polymer types, and include additional ion parameters, creating a semi-generic coarse-grained model that can map more specifically to polymers and copolymers with different chain architectures, component glass transition temperatures, and ion solvation behaviors. We set most parameters with basic homopolymer data such as glass transition temperatures, Kuhn length, density, and dielectric constant, with further adjustment based on data from the polymer electrolyte system. We specifically model polystyrene-block-poly(oligo-oxyethylene methyl ether methacrylate) (PS-b-POEM) with lithium triflate salt, considering the POEM to be made of a poly(methylmethacrylate) backbone with poly(ethylene oxide) side chains. Solvation of ions is accounted for by additional polymer-ion interactions of the form -S/r4, plus additional lithium-polymer Lennard-Jones interactions. We find these potentials have different effects and discuss strategies for setting these parameters.

Zhang, Yuanhao↗

DOE OSTI2021

Magnetic Compton Scattering Study of Li-Rich Battery Materials

The redox process in a lithium-ion battery occurs when a conduction electron from the lithium anode is transferred to the redox orbital of the cathode. Understanding the nature of orbitals involved in anionic as well as cationic redox reactions is important for improving the capacity and energy density of Li-ion batteries. In this connection, we have obtained magnetic Compton profiles (MCPs) from the Li-rich cation-disordered rock-salt compound LixTi0.4Mn0.4O2 (LTMO). The MCPs, which involved the scattering of circularly polarized hard X-rays, are given by the momentum density of all the unpaired spins in the material. The net magnetic moment in the ground state can be extracted from the area under the MCP, along with a SQUID measurement. Our analysis gives insight into the role of Mn 3d magnetic electrons and O 2p holes in the magnetic redox properties of LTMO.

Suzuki, Kosuke (ORCID:0000000317110604)↗

DOE OSTI2024

Carbon-Binder Optimization for Lithium-Ion Battery Extreme Fast Charge

carbon-binder additives↗

DOE OSTI2025

Selective partitioning and uphill transport enable effective Li/Mg ion separation by negatively charged membranes

Efficient separation of lithium (Li + ) and magnesium (Mg 2+ ) is critical for enhancing sustainable lithium extraction from natural brines, which is vital for battery production and renewable energy technologies. Here we present a method for highly selective Li + /Mg 2+ separation driven by concentration gradients across negatively charged membranes with high charge densities. In contrast to typical electric field-driven transport in negatively charged membranes, where divalent cations generally permeate faster than monovalent cations, Li + ions in our system permeate the membrane at substantially higher rates than Mg 2+ ions. This unexpected selectivity stems from the selective ion partitioning properties of the membrane and the uphill transport of Mg 2+ ions against their external concentration gradient. We demonstrate the efficacy of this separation approach through bench-scale dialysis experiments using a model Atacama brine solution, achieving efficient separation of monovalent and divalent cations. As a result, the high separation efficiency observed in this study suggests a promising approach for monovalent/divalent ion separations, offering higher selectivity compared to current technologies.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Role of Electrolyte in Overcoming the Challenges of LiNiO 2 Cathode in Lithium Batteries

LiNiO 2 (LNO) is a high-capacity and model cathode first discovered in the 1980s that fell out of favor due to its intrinsic instabilities. However, research activities toward LNO are once again on the rise as the push for higher-energy-density cells marches on. Here we demonstrate here that with appropriate modern electrolytes, major performance improvements can be achieved with LNO with no additional modifications. Cells with a localized high concentration electrolyte (LHCE) deliver 92% capacity retention after 200 cycles compared with 56% capacity retention in a baseline carbonate electrolyte, maintain 94% capacity after high-voltage storage compared with 77% capacity, and display a higher onset temperature of thermal runaway of 244 °C compared with 188 °C. These improvements are attributed to the LHCE’s high oxidative stability and its formation of fluorine-rich interphases. Although further characterization of this new class of electrolyte is necessary, this work demonstrates that modern electrolytes can be drop-in enablers of high-capacity, long-cycle-life cells.

25 ENERGY STORAGE↗