Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cell structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The Pioneer 11 imaging experiment of Jupiter

Pioneer 11 flew by Jupiter in December 1974 and obtained several hundred images of the planet. It is presently targeted for encounter with Saturn in 1979. The imaging photopolarimeter recorded spin-scan images with high photometric accuracy. It also recorded polarimetric and zodiacal-light data. Careful design of the instrument resulted in excellent performance in the Jovian radiation environment. Imaging data were displayed to maintain the proper shape of the planet. Color images were made by synthesizing green data from red and blue data. Pictures created from Pioneer 11 imaging data show complex detail within the Red Spot is well as indications of flow around it. Bright spots with trailing plumes are seen in the Equatorial Zone. The North Polar Region is devoid of belt structure, but numerous irregular cells are seen in red light. The Galilean satellites were imaged with a resolution of several hundred kilometers.

Swindell, W.↗
NASA NTRS1980

Satellite power systems (SPS) concept definition study. Volume 2, part 1: System engineering

Top level trade studies are presented, including comparison of solid state and klystron concepts, higher concentration on the solar cells, composite and aluminum structure, and several variations to the reference concept. Detailed trade studies are presented in each of the subsystem areas (solar array, power distribution, structures, thermal control, attitude control and stationkeeping, microwave transmission, and ground receiving station). A description of the selected point design is also presented.

Hanley, G. M.↗
NASA NTRS1983

Impact reactivity of materials at very high oxygen pressure

The requirements for impact testing of materials in an oxygen atmosphere at pressures from 82.7 MPa (12,000 psi) to 172 MPa (25,000 psi) were evaluated. The impact tester system was evaluated for potential pressure increases from 69 MPa (10,000 psi) to 82.7 MPa (12,000 psi). The low pressure oxygen and nitrogen systems, the impact tower, the impact test cell, and the high pressure oxygen system were evaluated individually. Although the structural integrity of the impact test cell and the compressor were sufficient for operation at 82.7 MPa (12,000 psi), studies revealed possible material incompatibility at that pressure and above. It was recommended that if a component should be replaced for 82.7 MPa (12,000 psi) operation the replacement should meet the final objectives of 172 MPa (25,000 psi). Recommended changes in the system include; use of Monel 400 for pressures above 82.7 MPa (12,000 psi), use of bellows to replace the seal in the impact tester, use of a sapphire window attached to a fiber optic for event sensing, and use of a three diaphragm compressor.

Connor, H. W.↗
NASA NTRS1985

Crystalline-silicon reliability lessons for thin-film modules

The reliability of crystalline silicon modules has been brought to a high level with lifetimes approaching 20 years, and excellent industry credibility and user satisfaction. The transition from crystalline modules to thin film modules is comparable to the transition from discrete transistors to integrated circuits. New cell materials and monolithic structures will require new device processing techniques, but the package function and design will evolve to a lesser extent. Although there will be new encapsulants optimized to take advantage of the mechanical flexibility and low temperature processing features of thin films, the reliability and life degradation stresses and mechanisms will remain mostly unchanged. Key reliability technologies in common between crystalline and thin film modules include hot spot heating, galvanic and electrochemical corrosion, hail impact stresses, glass breakage, mechanical fatigue, photothermal degradation of encapsulants, operating temperature, moisture sorption, circuit design strategies, product safety issues, and the process required to achieve a reliable product from a laboratory prototype.

Ross, R. G., Jr.↗
NASA NTRS1986

Metallo-Organic Decomposition (MOD) film development

The processing techniques and problems encountered in formulating metallo-organic decomposition (MOD) films used in contracting structures for thin solar cells are described. The use of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques performed at Jet Propulsion Laboratory (JPL) in understanding the decomposition reactions lead to improvements in process procedures. The characteristics of the available MOD films were described in detail.

Parker, J.↗
NASA NTRS1989

Advanced Photovoltaic Solar Array program status

The Advanced Photolvoltaic Solar Array (APSA) Program is discussed. The objective of the program is to demonstrate a producible array system by the end of this decade with a beginning-of-life (BOL) specific power of 130 W/kg at 10 kW as an intermediate milestone toward the ultimate goal of 300 W/kg at 25 kW by the year 2000. The near-term goal represents a significant improvement over existing rigid panel flight arrays (25 to 45 W/kg) and the first-generation flexible blanket NASA/OAST SAFE I array of the early 1980s, which was projected to provide about 60 W/kg BOL. The prototype wing hardware is in the last stages of fabrication and integration. The current status of the program is reported. The array configuration and key design details are shown. Projections are shown for future performance enhancements that may be expected through the use of advanced structural components and solar cells.

Kurland, Richard M.↗
NASA NTRS1992

Growth and sporulation of Bacillus subtilis under microgravity (7-IML-1)

The experiment was aimed at measuring the growth and sporulation of Bacillus subtilis under microgravity. The hardware for the experiment consists of a culture chamber (15 ml) made from titanium and closed by a membrane permeable for gases but not for water. Two variants of this basic structure were built which fit into the standard Biorack container types 1 and 2 respectively. Growth of the bacteria will be monitored by continuously measuring the optical density with a built-in miniaturized photometer. Other parameters (viability, sporulation, fine structure, size distribution of cells and spores, growth kinetics, etc.) will be measured on the fixed samples and on those where metabolism was temporarily halted, respectively.

Mennigmann, Horst-Dieter↗
NASA NTRS1992

Cartesian based grid generation/adaptive mesh refinement

Grid adaptation has recently received attention in the computational fluid dynamics (CFD) community as a means to capture the salient features of a flowfield by either moving grid points of a structured or by adding cells in an unstructured manner. An approach based on a background cartesian mesh is investigated from which the geometry is 'cut' out of the mesh. Once the mesh is obtained, a solution on this coarse grid is found, that indicates which cells need to be refined. This process of refining/solving continues until the flow is grid refined in terms of a user specified global parameter (such as drag coefficient etc.). The advantages of this approach are twofold: the generation of the base grid is independent of the topology of the bodies or surfaces around/through which the flow is to be computed, and the resulting grid (in uncut regions) is highly isotropic, so that the truncation error is low. The flow solver (which, along with the grid generation is still under development) uses a completely unstructured data base, and is a finite volume, upwinding scheme. Current and future work will address generating Navier-Stokes suitable grids by using locally aligned and normal face/cell refining. The attached plot shows a simple grid about two turbine blades.

Coirier, William J.↗
NASA NTRS1992

Cellular convection in the atmosphere of Venus

Among the most intriguing feature of the atmosphere of Venus is the presence of cellular structures near and downwind of the subpolar point. It has been suggested that the structures are atmospheric convection cells, but their breadth and thinness would pose a severe challenge to the dynamics of convection. It is proposed here that strongly penetrative convection into the stable regions above and below the neutrally stable cloud layer coupled with penetrative convection from the surface increases the vertical dimensions of the cells, thereby helping to explain their large horizontal extent.

Baker, R. D., II↗
NASA NTRS1991

A high-performance photovoltaic concentrator array - The mini-dome Fresnel lens concentrator with 30 percent efficient GaAs/GaSb tandem cells

A high-efficiency, lightweight space photovoltaic concentrator array is described. Previous work on the minidome Fresnel lens concentrator concept is being integrated with Boeing's 30 percent efficient tandem GaAs/GaSb concentrator cells into a high-performance photovoltaic array. Calculations indicate that, in the near term, such an array can achieve 300 W/sq m at a specific power of 100 W/kg. Emphasis of the program has now shifted to integrating the concentrator lens, tandem cell, and supporting panel structure into a space-qualifiable array. A description is presented of the current status of component and prototype panel testing and the development of a flight panel for the Photovoltaic Array Space Power Plus Diagnostics (PASP PLUS) flight experiment.

Piszczor, M. F.↗
NASA NTRS1992

Analytic and numerical models of wave-CISK with conditional heating

Wave-CISK with conditional heating is investigated in the equatorial zonal-height plane by analytic and numerical techniques. For two- and three-level models, previous results are extended to give additional evidence that the most unstable mode has a single wet region of infinitesimal width. A three-level model has qualitatively similar behavior as the two-level model except that propagating solutions are possible due to coalescence of internal vertical modes. Phase speeds with conditional heating are found to be slightly greater than those for unconditional heating. The structure has one circulation cell in the vertical and is asymmetric in longitude with stronger motion on the leading edge. Growth rate is inversely proportional to the width of the single wet region. That width can be limited by second-order diffusion. A general integral relationship between growth rate, viscosity, phase speed, and heating is derived. The main conclusion is that the linear wave-CISK catastrophe is modified by conditional heating but not eliminated. The preferred mode of instability has one wet region, but it occurs on the smallest possible scale. It is likely that numerical models that use conditional heating are sensitive to resolution, especially for the commonly used spectral truncations, unless there is sufficiently strong damping at the smallest scales.

Crum, Francis X.↗
NASA NTRS1996

Applications of Parallel Computation in Micro-Mechanics and Finite Element Method

This project discusses the application of parallel computations related with respect to material analyses. Briefly speaking, we analyze some kind of material by elements computations. We call an element a cell here. A cell is divided into a number of subelements called subcells and all subcells in a cell have the identical structure. The detailed structure will be given later in this paper. It is obvious that the problem is "well-structured". SIMD machine would be a better choice. In this paper we try to look into the potentials of SIMD machine in dealing with finite element computation by developing appropriate algorithms on MasPar, a SIMD parallel machine. In section 2, the architecture of MasPar will be discussed. A brief review of the parallel programming language MPL also is given in that section. In section 3, some general parallel algorithms which might be useful to the project will be proposed. And, combining with the algorithms, some features of MPL will be discussed in more detail. In section 4, the computational structure of cell/subcell model will be given. The idea of designing the parallel algorithm for the model will be demonstrated. Finally in section 5, a summary will be given.

Tan, Hui-Qian↗
NASA NTRS1998

Media Compositions for Three-Dimensional Mammalian Tissue Growth under Microgravity Culture Conditions

Normal mammalian tissue and the culturing process has been developed for the three groups of organ, structural and blood tissue.The cells are grown in vitro under microgravity culture conditions and form three dimensional cells aggregates with normal cell function. The microgravity culture conditions may be microgravity or simulated microgravity created in a horizontal rotating wall culture vessel.

Goodwin, Thomas J.↗
NASA NTRS1999

The TRMM Precipitation Radar: Opportunities and Challenges

Although studies on the feasibility of spaceborne weather radar date back to the 1960's, it was only with the launch of the Tropical Rainfall Measuring Mission (TRMM) Satellite in November 1997 that the first weather radar was placed into low earth orbit. The long delay between the initial concept and implementation was caused not only by the demanding requirements of active sensors such as mass, power, and reliability, but because of scientific and technological challenges. For example, the demand for adequate spatial resolution arises from the need to resolve the horizontal structure of convective storm cells and to avoid surface contamination of the rain return at off-nadir angles. To achieve a horizontal resolution on the order of 4 km from low earth orbit with a modest antenna size of 2 m requires the use of a much higher frequency (Ku-band) than those typically used for ground-based weather radars (S- and C-band). Higher frequencies are subject to higher attenuation. As Hitschfeld and Bordan (1954) showed in their classic paper, attenuation correction with a single-wavelength radar is inherently unstable at high attenuations unless the drop size distribution and the radar constant are known precisely. Since these conditions are seldom met, much work over the last decade has been devoted to formulating and testing alternative methods of attenuation correction. The operational method used in the TRMM radar processing is discussed in section 3 of the paper.

Meneghini, R.↗
NASA NTRS2001

Research activities at the Loma Linda University and Proton Treatment Facility--an overview

The Loma Linda University (LLU) Radiobiology Program coordinates basic research and proton beam service activities for the university and extramural communities. The current focus of the program is on the biological and physical properties of protons and the operation of radiobiology facilities for NASA-sponsored projects. The current accelerator, supporting facilities and operations are described along with a brief review of extramural research projects supported by the program. These include space craft electronic parts and shielding testing as well as tumorigenesis and animal behavior experiments. An overview of research projects currently underway at LLU is also described. These include: 1) acute responses of the C57Bl/6 mouse immune system, 2) modulation of gene expression in the nematode C. elegans and rat thyroid cells, 3) quantitation of dose tolerance in rat CNS microvasculature, 4) behavioral screening of whole body proton and iron ion-irradiated C57Bl/6 mice, and 5) investigation of the role of cell integration into epithelial structures on responses to radiation.

Non-NASA Center↗
NASA NTRS2000

Analysis of MIR-18 results for physical and biological dosimetry: radiation shielding effectiveness in LEO

We compare models of radiation transport and biological response to physical and biological dosimetry results from astronauts on the Mir space station. Transport models are shown to be in good agreement with physical measurements and indicate that the ratio of equivalent dose from the Galactic Cosmic Rays (GCR) to protons is about 3/2:1 and that this ratio will increase for exposures to internal organs. Two biological response models are used to compare to the Mir biodosimetry for chromosome aberration in lymphocyte cells; a track-structure model and the linear-quadratic model with linear energy transfer (LET) dependent weighting coefficients. These models are fit to in vitro data for aberration formation in human lymphocytes by photons and charged particles. Both models are found to be in reasonable agreement with data for aberrations in lymphocytes of Mir crew members: however there are differences between the use of LET dependent weighting factors and track structure models for assigning radiation quality factors. The major difference in the models is the increased effectiveness predicted by the track model for low charge and energy ions with LET near 10 keV/micrometers. The results of our calculations indicate that aluminum shielding, although providing important mitigation of the effects of trapped radiation, provides no protective effect from the galactic cosmic rays (GCR) in low-earth orbit (LEO) using either equivalent dose or the number of chromosome aberrations as a measure until about 100 g/cm 2 of material is used.

Flight Experiment↗
NASA NTRS2005

Polynomial Expressions for Estimating Elastic Constants From the Resonance of Circular Plates

Two approaches were taken to make convenient spread sheet calculations of elastic constants from resonance data and the tables in ASTM C1259 and E1876: polynomials were fit to the tables; and an automated spread sheet interpolation routine was generated. To compare the approaches, the resonant frequencies of circular plates made of glass, hardened maraging steel, alpha silicon carbide, silicon nitride, tungsten carbide, tape cast NiO-YSZ, and zinc selenide were measured. The elastic constants, as calculated via the polynomials and linear interpolation of the tabular data in ASTM C1259 and E1876, were found comparable for engineering purposes, with the differences typically being less than 0.5 percent. Calculation of additional v values at t/R between 0 and 0.2 would allow better curve fits. This is not necessary for common engineering purposes, however, it might benefit the testing of emerging thin structures such as fuel cell electrolytes, gas conversion membranes, and coatings when Poisson s ratio is less than 0.15 and high precision is needed.

Salem, Jonathan A.↗
NASA NTRS2006

Structural Continuum Modeling of Space Shuttle External Tank Foam Insulation

This document is a viewgraph presentation reporting on work in modeling the foam insulation of the Space Shuttle External Tank. An analytical understanding of foam mechanics is required to design against structural failure. The Space Shuttle External Tank is covered primarily with closed cell foam to: Prevent ice, Protect structure from ascent aerodynamic and engine plume heating, and Delay break-up during re-entry. It is important that the foam does not shed unacceptable debris during ascent environment. Therefore a modeling of the foam insulation was undertaken.

Steeve, Brian↗