Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite

Abstract Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO 3 ‐Fe 2 O 3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO 3 ‐Fe 2 O 3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.

Polymer Science↗
DOE OSTI2024

High‐pressure Synthesis of Cobalt Polynitrides: Unveiling Intriguing Crystal Structures and Nitridation Behavior

Abstract In this study, we conduct extensive high‐pressure experiments to investigate phase stability in the cobalt‐nitrogen system. Through a combination of synthesis in a laser‐heated diamond anvil cell, first‐principles calculations, Raman spectroscopy, and single‐crystal X‐ray diffraction, we establish the stability fields of known high‐pressure phases, hexagonal NiAs‐type CoN, and marcasite‐type CoN 2 within the pressure range of 50–90 GPa. We synthesize and characterize previously unknown nitrides, Co 3 N 2 ,Pnma‐CoN and two polynitrides, CoN 3 and CoN 5 , within the pressure range of 90–120 GPa. Both polynitrides exhibit novel types of polymeric nitrogen chains and networks. CoN 3 feature branched‐type nitrogen trimers (N 3 ) and CoN 5 show π‐bonded nitrogen chain. As the nitrogen content in the cobalt nitride increases, the CoN 6 polyhedral frameworks transit from face‐sharing (in CoN) to edge‐sharing (in CoN 2 and CoN 3 ), and finally to isolated (in CoN 5 ). Our study provides insights into the intricate interplay between structure evolution, bonding arrangements, and high‐pressure synthesis in polynitrides, expanding the knowledge for the development of advanced energy materials

Chemistry↗
DOE OSTI2022

Enhanced Carbon Capture Behavior of Carbon Fibers via Ionic Liquid Modification

Carbon-based materials are widely deployed in carbon capture but are only limited to physisorption procedures. Further extending functionalized carbon materials to CO 2 chemisorption under low CO 2 concentration is highly desirable yet challenging. In this study, a carbon fiber composed of solely ultra-micropores (~0.45 nm) was deployed as the precursor to avoid the pore blocking effect, which was modified by superbase-derived ionic liquids (ILs) containing strong interaction sites with CO 2 . By forming a thin coating layer on the surface, the as-afforded surface-functionalized fiber materials demonstrated enhanced CO 2 uptake capacity and improved CO 2 sorption kinetics, as evaluated by both the volumetric method and thermogravimetric analysis, as well as the calculated energy distribution curves. The achievements made in this work provide guidance on the functionalization of carbon-based materials towards enhanced CO 2 chemisorption by forming a thin layer of selected IL coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Probing the Behavior of Composition‐Tunable Ultrathin PtNi Nanowires for CO Oxidation and Small‐Molecule Electrocatalytic Reactions

We have successfully synthesized ultrathin nanowires of pure Pt, Pt 99 Ni 1 , Pt 9 Ni 1 , and Pt 7 Ni 3 using a modified room-temperature soft-template method. Analysis of both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) results found that the Pt 7 Ni 3 samples yielded the best performance with specific activities of 0.36 and 0.34 mA/cm 2 respectively. Additionally, formic acid oxidation reaction (FAOR) tests noted that both Pt and PtNi nanowires oxidize small organic molecules (SOMs) via an indirect pathway. CO oxidation data suggests little measurable performance without any pre-reduction treatment; however, after annealing in H 2 , we detected significantly improved CO 2 formation for both Pt 9 Ni 1 and Pt 7 Ni 3 motifs. These observations highlight the importance of pre-treating these nanowires under a reducing atmosphere to enhance their performance for CO oxidation. To explain these findings, we collected extended x-ray adsorption fine structure (EXAFS) spectroscopy data, consistent with the presence of partial alloying with a tendency for Pt and Ni to segregate, thereby implying the formation of a Pt-rich shell coupled with a Ni-rich core. Here, we also observed that the degree of alloying within the nanowires increased after annealing in a reducing atmosphere, a finding deduced through analysis of the coordination numbers and calculations of Cowley's short range order parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Role of Redox-Inactive Transition-Metals in the Behavior of Cation-Disordered Rocksalt Cathodes

Owing to the capacity boost from oxygen redox activities, Li-rich cation-disordered rocksalts (LRCDRS) represent a new class of promising high-energy Li-ion battery cathode materials. Redox-inactive transition-metal (TM) cations, typically d 0 TM, are essential in the formation of rocksalt phases, however, their role in electrochemical performance and cathode stability is largely unknown. In the present study, the effect of two d 0 TM (Nb 5+ and Ti 4+ ) is systematically compared on the redox chemistry of Mn-based model LRCDRS cathodes, namely Li 1.3 Nb 0.3 Mn 0.4 O 2 (LNMO), Li 1.25 Nb 0.15 Ti 0.2 Mn 0.4 O 2 (LNTMO), and Li 1.2 Ti 0.4 Mn 0.4 O 2 (LTMO). Although electrochemically inactive, d 0 TM serves as a modulator for oxygen redox, with Nb 5+ significantly enhancing initial charge storage contribution from oxygen redox. Further studies using differential electrochemical mass spectroscopy and resonant inelastic X-ray scattering reveal that Ti 4+ is better in stabilizing the oxidized oxygen anions (O n- , 0 < n < 2), leading to a more reversible O redox process with less oxygen gas release. As a result, much improved chemical, structural and cycling stabilities are achieved on LTMO. Detailed evaluation on the effect of d 0 TM on degradation mechanism further suggests that proper design of redox-inactive TM cations provides an important avenue to balanced capacity and stability in this newer class of cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Selective Catalytic Behavior Induced by Crystal–Phase Transformation in Well–Defined Bimetallic Pt–Sn Nanocrystals

The Pt-Sn bimetallic system is a much studied and commercially used catalyst for propane dehydrogenation. The traditionally prepared catalyst, however, suffers from inhomogeneity and phase separation of the active Pt–Sn phase. Colloidal chemistry offers a route for the synthesis of Pt–Sn bimetallic nanoparticles (NPs) in a systematic, well-defined, tailored fashion over conventional methods. Here, the successful synthesis of well-defined ≈2 nm Pt, PtSn, and Pt 3 Sn nanocrystals with distinct crystallographic phases is reported; hexagonal close packing (hcp) PtSn and fcc Pt 3 Sn show different activity and stability depending on the hydrogen-rich or poor environment in the feed. Moreover, face centred cubic (fcc) Pt 3 Sn/Al 2 O 3 , which exhibited the highest stability compared to hcp PtSn, shows a unique phase transformation from an fcc phase to an L1 2 -ordered superlattice. Contrary to PtSn, H 2 cofeeding has no effect on the Pt 3 Sn deactivation rate. Finally, the results reveal structural dependency of the probe reaction, propane dehydrogenation, and provide a fundamental understanding of the structure–performance relationship on emerging bimetallic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

How Atomic Bonding Plays the Hardness Behavior in the Al–Co–Cr–Cu–Fe–Ni High Entropy Family

A systematic study on a face-centered cubic-based compositionally complex alloy system Al–Co–Cr–Cu–Fe–Ni in its single-phase state is carried out, where a mother senary compound Al 8 Co 17 Cr 17 Cu 8 Fe 17 Ni 33 and five of its suballoys, obtained by removing one element at a time, are investigated and exhaustively analyzed determining the contribution of each alloying element in the solid solution. The senary and the quinaries are compared using experimental techniques including X-ray absorption spectroscopy, X-ray diffraction, transmission electron microscopy, and first principles hybrid Monte Carlo/molecular dynamics simulations. Chemical short-range order and bond length distances have been determined both at the experimental and computational level. Electronic structure and local atomic distortions up to 5.2 Å have been correlated to the microhardness values. A linear regression model connecting hardness with local lattice distortions is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Mapping Conductance and Switching Behavior of Graphene Devices In Situ

Graphene is proposed for use in various nanodevice designs, many of which harness emergent quantum properties for device functionality. However, visualization, measurement, and manipulation become nontrivial at nanometer and atomic scales, representing a significant challenge for device fabrication, characterization, and optimization at length scales where quantum effects emerge. Herein, proof of principle results at the crossroads between 2D nanoelectronic devices, e-beam-induced modulation, and imaging with secondary electron e-beam induced currents (SEEBIC) is presented. A device platform compatible with scanning transmission electron microscopy investigations is introduced. Then how the SEEBIC imaging technique can be used to visualize conductance and connectivity in single layer graphene nanodevices, even while supported on a thicker substrate (conditions under which conventional imaging fails) is shown. Finally, it is shown that the SEEBIC imaging technique can detect subtle differences in charge transport through time in nonohmic graphene nanoconstrictions indicating the potential to reveal dynamic electronic processes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unveiling User Behavior on Summit Login Nodes as a User

We observe and analyze usage of the login nodes of the leadership class Summit supercomputer from the perspective of an ordinary user—not a system administrator—by periodically sampling user activities (job queues, running processes, etc.) for two full years (2020–2021). Our findings unveil key usage patterns that evidence misuse of the system, including gaming the policies, impairing I/O performance, and using login nodes as a sole computing resource. Our analysis highlights observed patterns for the execution of complex computations (workflows), which are key for processing large-scale applications.

Wilkinson, Sean↗
DOE OSTI2024

Extracting the asymptotic behavior of S-matrix elements from their phases

The asymptotic kinematic limits of S-matrices are dominated by large logarithms which, roughly speaking, fall into two categories: those which are controlled by a renormalization group (RG) scale, which we may think of as logs involving ratios of invariant mass scales, and those which are functions of ratios of rapidities, so called “rapidity logs”. It has been pointed out by Caron-Huot and Wilhlem [1] that RG anomalous dimension can be extracted from the phase of the S-matrix, which can greatly simplify calculations via unitarity methods. In this paper we generalize the results of [1] to show that the phase can be used to reconstruct rapidity anomalous dimensions, by performing a special type of complex boost. The methodology introduced allows one to calculate without the need for a rapidity regulator which can lead to significant simplifications. We demonstrate the use of this method to derive the rapidity anomalous dimensions in the Sudakov form factor and the two parton soft function at two loops order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Influence of printing parameters on the mechanical behavior of 3D-printed SS316L parts manufactured using laser hot wire directed energy deposition

Hybrid manufacturing combines the simultaneous benefits of additive manufacturing (complex geometries, part consolidation, and mass customization) with the advantages of subtractive manufacturing (superior surface finish and enhanced dimensional accuracies) by integrating a suite of complementary traditional processes into a base platform of additive manufacturing. The use of hybrid technology has grown in recent years given its capabilities on repairing metallic structures, producing parts with conformal cooling features, and manufacturing functionally graded products. These kinds of capabilities are of great interest to the medical implant, energy, automotive, maritime, and aerospace industry sectors, among many other fields. This work investigated the mechanical properties of stainless steel (SS) 316L as a function of different tool paths strategies using an integrated 5-axis CNC hybrid Mazak system with a laser hot wire deposition system (LHWDS). This study includes the evaluation of different printing parameters and their impact on the quality of the printed bead as well as the incorporation of a structure–property material relationship based on the mechanical performance of the manufactured coupons.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fatigue behavior of low-cost, non-spherical Ti-6Al-4V powder processed via laser powder bed fusion

Hydride-dehydride Ti-6Al-4V powder with particle size distribution of 75–175 μm were used to manufacture fatigue samples. Optimized processing parameters were used to maintain a relative density of >99.5% in the samples. Fatigue tests were carried out in R = σ min /σ max = -1 condition under stresses ranging from 150 to 500 MPa and the results were compared to samples that were additively manufactured using spherical powders. The fatigue lives were similar between the two types of powder; i.e., powder morphology has no effect on fatigue performance. However, the high surface roughness and martensitic microstructure resulting from the laser powder bed fusion process result in poor performance compared to samples machined from conventionally produced materials. In conclusion, crack initiation occurred consistently from surface defects because of high surface roughness of the additively manufactured parts.

36 MATERIALS SCIENCE↗