Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wave model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The Role of Phytoplankton Biomacromolecules in Controlling Ocean Surface Roughness

Satellite altimetric data routinely map sea surface topography by measuring the ocean return signal. One source of altimeter measurement contamination occurs when the radar ocean backscatter becomes unusually large, a situation termed a Sigma-0 bloom. Past research suggests Sigma-0 blooms are associated with weak wind and natural surface slick conditions where capillary waves at the air–sea interface are suppressed. To date, no explicit connection between these conditions and Sigma-0 bloom presence has been provided. Using a series of simplified equations, our reduced model determines capillary wave heights from estimates of planktonic carbon concentrations and regional wind speed. Our results suggest that the radar signal reflection increases as capillary wave height decreases. This relationship depends on surfactant concentration, surfactant composition, and wind speed. Model sensitivity analysis indicates that the interface reflectivity depends on biological activity and wind speed. Our proposed simplified model provides a method to identify potential Sigma-0 bloom regions. We conclude that because of the demonstrated impact of biological surfactants on ocean roughness, it is necessary to consider the biological activity, i.e., phytoplankton bloom events, when interpreting signals from radar altimetry and when developing ocean hydrology models.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2001

Ultrasonic wave propagation in trabecular bone predicted by the stratified model

The objective of this study was to investigate ultrasound propagation in trabecular bone by considering the wave reflection and transmission in a multilayered medium. The use of ultrasound to identify those at risk of osteoporosis is a promising diagnostic method providing a measure of bone mineral density (BMD). A stratified model was proposed to study the effect of transmission and reflection of ultrasound wave within the trabecular architecture on the relationship between ultrasound and BMD. The results demonstrated that ultrasound velocity in trabecular bone was highly correlated with the bone apparent density (r=0.97). Moreover, a consistent pattern of the frequency dependence of ultrasound attenuation coefficient has been observed between simulation using this model and experimental measurement of trabecular bone. The normalized broadband ultrasound attenuation (nBUA) derived from the simulation results revealed that nBUA was nonlinear with respect to trabecular porosity and BMD. The curve of the relationship between nBUA and BMD was parabolic in shape, and the peak magnitude of nBUA was observed at approximately 60% of bone porosity. These results agreed with the published experimental data and demonstrated that according to the stratified model, reflection and transmission were important factors in the ultrasonic propagation through the trabecular bone.

Non-NASA Center↗
NASA NTRS1982

Dissipation of ionospheric irregularities by wave-particle and collisional interactions

The nonlinear dissipation of plasma irregularities aligned parallel to an ambient magnetic field is studied numerically using a model which employs both wave-particle and collisional diffusion. A wave-particle diffusion coefficient derived from a local theory of the universal drift instability is used. This coefficient is effective in regions of nonzero plasma gradients and produces triangular-shaped irregularities with spectra which vary as f to the -4th, where f is the spatial frequency. Collisional diffusion acts rapidly on the vertices of the irregularities to reduce their amplitude. The simultaneous action of the two dissipative processes is more efficient than collisions acting alone. In this model, wave-particle diffusion mimics the forward cascade process of wave-wave coupling.

Bernhardt, P. A.↗
NASA NTRS1972

Interplanetary shock waves and the structure of solar wind disturbances

Observations and theoretical models of interplanetary shock waves are reviewed, with emphasis on the large-scale characteristics of the associated solar wind disturbances and on the relationship of these disturbances to solar activity. The sum of observational knowledge indicates that shock waves propagate through the solar wind along a broad, roughly spherical front, ahead of plasma and magnetic field ejected from solar flares. Typically, the shock front reaches 1 AU about two days after its flare origin, and is of intermediate strength. Not all large flares produce observable interplanetary shock waves; the best indicator of shock production appears to be the generation of both type 2 and type 4 radio bursts by a flare. Theoretical models of shock propagation in the solar wind can account for the typically observed shock strength, transit time, and shape.

Hundhausen, A. J.↗
NASA NTRS1991

Scale selection and propagation of wave-CISK with conditional heating

Analytic solutions are derived for simple models of equatorial wave-CISK with conditional (positive-only) heating. Conditional heating favors an unstable mode having a single wet region of infinitesimal width. This result helps explain model simulations of tropical superclusters and intraseasonal oscillations. Mechanisms of scale selection and propagation are discussed, and the model is generalized to include evaporation-wind feedback, multiple vertical-mode CISK, and scale-dependent damping. The first two mechanisms cause zonal propagation, without scale selection. Scale-dependent damping breaks the inviscid continuum (wherein modes exist as a continuous function of wet region width) into discrete modes with unique horizontal structure and phase speed. Results are contrasted with the hierarchy of scales in observed intraseasonal oscillations.

Dunkerton, Timothy J.↗
NASA NTRS1984

Forecasts of the 500 mb height using a dynamically oriented statistical model

The forecast skill of a simple dynamically inspired statistical model of the Northern Hemisphere 500 mb height field is evaluated in spectral and physical space for a variety of forecast lead times (1-32 days) and predictand averaging times (1-32 days). The model includes viscous damping, wave propagation, climatology and implicit stochastic forcing. The largest model skill was found for forecasts of the zonal flow and the largest waves. In general, the largest forecast skills were also associated with the largest forecast error, there being a slight geographic phase shift of the skill with respect to the error. Model skills for climate (time-averaged) forecasts are greater when using instantaneous rather than time averages to forecast time averages. Analysis of model errors suggests areas for improvement in representing forcing terms and model physics. However, the model error fields are largely 'white noise' which suggests that global forecast skills substantially larger than those obtained here are unlikely to be achieved by more sophisticated models.

Roads, J. O.↗
NASA NTRS1990

Simulation studies of plasma waves in the electron foreshock - The generation of Langmuir waves by a gentle bump-on-tail electron distribution

Particle simulation experiments were used to study the basic physical ingredients needed for building a global model of foreshock wave phenomena. In particular, the generation of Langmuir waves by a gentle bump-on-tail electron distribution is analyzed. It is shown that, with appropriately designed simulations experiments, quasi-linear theory can be quantitatively verified for parameters corresponding to the electron foreshock.

Dum, C. T.↗
NASA NTRS1981

Daylight imagery of ocean surface waves for wave spectra

A simple second-order model is developed to describe the transformation between surface wave slope and radiance incident on an optical sensor. The model includes azimuth as well as elevation variations in the sky-radiance distribution and their effects on the imaging of wave slopes approaching the sensor azimuth from various directions. The model also includes upwelling radiance. Comparison between the exact transformation from wave slope to radiance and the second-order model suggests that they yield quantitatively similar results. The model is used in physical interpretations of how wave slopes are imaged and in indicating a way of optimizing the linearity and contrast of the transfer function relating wave slope to radiance for various sensor geometries, thereby minimizing sources of error. One-dimensional numerical simulations of the imaging of an analytically generated wave-slope profile demonstrate the utility of this technique in obtaining slope spectra.

Monaldo, F. M.↗
DOE OSTI2024

Gravitational wave signatures of a chiral fermion dark matter model

Abstract Theories in which the dark matter (DM) candidate is a fermion transforming chirally under a gauge symmetry are attractive, as the gauge symmetry would protect the DM mass. In such theories, the universe would have undergone a phase transition at early times that generated the DM mass upon spontaneous breaking of the gauge symmetry. In this paper, we explore the gravitational wave signals of a simple such theory based on an SU(2) D dark sector with a dark isospin-3/2 fermion serving as the DM candidate. This is arguably the simplest chiral theory possible. The scalar sector consists of a dark isospin-3 multiple, which breaks the SU(2) D gauge symmetry and also generates the DM mass. We construct the full thermal potential of the model and identify regions of parameter space which lead to detectable gravitational wave signals, arising from a strong first-order SU(2) D phase transition, in various planned space-based interferometers, while also being consistent with dark matter relic abundance. The bulk of the parameter space exhibiting detectable gravitational wave signals in the model also has large WIMP-nucleon scattering cross sections, ℴSI, which could be probed in upcoming direct detection experiments.

Astronomy & Astrophysics↗
DOE OSTI2021

Data–Driven Velocity Model Evaluation Using K–Means Clustering

In this work, we develop a data-driven clustering method to evaluate a velocity model using surface wave velocity dispersion. This is done by first computing theoretical dispersion curves for 1-D velocity profiles of all the grid locations and then splitting the resulting dispersion curves into a certain number of groups via the K-means clustering. The observed dispersion curves are also clustered following the same procedure and the velocity model is assessed by comparing the spatial patterns obtained for the observed and synthetic data sets. The method is applied to evaluate two community velocity models in southern California, CVM-S4.26 and CVM-H15.1, using phase velocity maps derived for 3–16 s Rayleigh waves. We found a good correlation in the spatial distribution of clusters between the result of CVM-S4.26 and that of the observed data, suggesting that the CVM-S4.26 fits the observed dispersion maps better than the CVM-H15.1 in terms of features extracted from the clustering analysis.

58 GEOSCIENCES↗
NASA NTRS1996

Computational Modeling of Ultrafast Pulse Propagation in Nonlinear Optical Materials

There is an emerging technology of photonic (or optoelectronic) integrated circuits (PICs or OEICs). In PICs, optical and electronic components are grown together on the same chip. rib build such devices and subsystems, one needs to model the entire chip. Accurate computer modeling of electromagnetic wave propagation in semiconductors is necessary for the successful development of PICs. More specifically, these computer codes would enable the modeling of such devices, including their subsystems, such as semiconductor lasers and semiconductor amplifiers in which there is femtosecond pulse propagation. Here, the computer simulations are made by solving the full vector, nonlinear, Maxwell's equations, coupled with the semiconductor Bloch equations, without any approximations. The carrier is retained in the description of the optical pulse, (i.e. the envelope approximation is not made in the Maxwell's equations), and the rotating wave approximation is not made in the Bloch equations. These coupled equations are solved to simulate the propagation of femtosecond optical pulses in semiconductor materials. The simulations describe the dynamics of the optical pulses, as well as the interband and intraband.

Goorjian, Peter M.↗
NASA NTRS2017

Simulation of Guided-Wave Ultrasound Propagation in Composite Laminates: Benchmark Comparisons of Numerical Codes and Experiment

Ultrasonic wave methods constitute the leading physical mechanism for nondestructive evaluation (NDE) and structural health monitoring (SHM) of solid composite materials, such as carbon fiber reinforced polymer (CFRP) laminates. Computational models of ultrasonic wave excitation, propagation, and scattering in CFRP composites can be extremely valuable in designing practicable NDE and SHM hardware, software, and methodologies that accomplish the desired accuracy, reliability, efficiency, and coverage. The development and application of ultrasonic simulation approaches for composite materials is an active area of research in the field of NDE. This paper presents comparisons of guided wave simulations for CFRP composites implemented using four different simulation codes: the commercial finite element modeling (FEM) packages ABAQUS, ANSYS, and COMSOL, and a custom code executing the Elastodynamic Finite Integration Technique (EFIT). Benchmark comparisons are made between the simulation tools and both experimental laser Doppler vibrometry data and theoretical dispersion curves. A pristine and a delamination type case (Teflon insert in the experimental specimen) is studied. A summary is given of the accuracy of simulation results and the respective computational performance of the four different simulation tools.

Composite↗
DOE OSTI2020

Three-dimensional modeling and simulations of single-crystal and bi-crystal titanium for high-strain-rate loading conditions

High purity single crystal titanium (Ti) under shock wave loading is modeled under both one-dimensional and three-dimensional cylindrical conditions. Cylinder sizes of 10 μm and 20 μm radius are both considered in order to assess influence of boundary conditions. A thermodynamically consistent single crystal model for application to shock conditions is presented. The model accounts for the coupled non-linear elastic, dislocation slip, deformation twinning, and structural phase transformation response of the titanium material. Plate impact experiment results using a copper flyer are used to compare against the simulations for crystals oriented in [0001] and [10$\overline1$1] crystallographic directions. The one-dimensional and threedimensional simulations of the two differently oriented single crystals indicate differences between the one-dimensional and three-dimensional representation, especially for the [10$\overline1$1] oriented single crystal. This orientation breaks the relative orientation symmetry between the crystal and cylinder which otherwise exists for the [0001] oriented single crystal. A significant amount of heterogeneity in the field response of the[10$\overline1$1] oriented simulation was demonstrated due to the highly coupled nature of the deformation. A bi-crystal model composed of both the [0001] and [10$\overline1$1] orientations with the boundary between the two along the axis of the cylinder is also considered for a cylinder model size of 10 μm. The results indicate a strong interaction between the two grains that affects the ω phase volume fraction achieved relative to the single crystal calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On Building Predictive Digital Twin Incorporating Wave Predicting Capabilities: Case Study on UMaine Experimental Campaign - FOCAL

The response of floating wind turbines (FWT) are susceptible to stochastic wave variations. For the optimal operation of FWT, a comprehensive understanding of the phaseresolved wave dynamics and the consequential system response is crucial for real-time monitoring and control. A multi-variate, multi-step, long short term memory (MLSTM), a type of recurrent neural network (RNN) is used to capture complex system dynamics for real-time application. Results indicate that the integration of a wave prediction-reconstruction (WRP) model substantially enhances prediction accuracy by 50% on average relative to the baseline model. The improvement is consistent across various wave extremity and prediction horizons, thereby significantly broadening the scope for timely and precise predictive capabilities.

17 WIND ENERGY↗
DOE OSTI2021

Quantum computing without quantum computers: Database search and data processing using classical wave superposition

Quantum computers are proven to be more efficient at solving a specific class of problems compared to traditional digital computers. Superposition of states and quantum entanglement are the two key ingredients that make quantum computing so powerful. However, not all quantum algorithms require quantum entanglement (e.g., search through an unsorted database). Is it possible to utilize classical wave superposition to speed up database searching as much as by using quantum computers? There were several attempts to mimic quantum computers using classical waves. It was concluded that the use of classical wave superposition comes with the cost of an exponential increase in resources. In this work, we consider the feasibility of building classical wave-based devices able to provide fundamental speedup over digital counterparts without the exponential overhead. We present experimental data on database searching through a magnetic database using spin wave superposition. The results demonstrate the same speedup as expected for quantum computers. Also, we present examples of numerical modeling demonstrating classical wave interference for period finding. This approach may not compete with quantum computers with efficiency but outperform classical digital computers. We argue that classical wave-based devices can perform some of the quantum algorithms with the same efficiency as quantum computers as long as quantum entanglement is not required.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

High-accuracy waveforms for black hole-neutron star systems with spinning black holes

The availability of accurate numerical waveforms is an important requirement for the creation and calibration of reliable waveform models for gravitational wave astrophysics. For black hole-neutron star binaries, very few accurate waveforms are however publicly available. Most recent models are calibrated to a large number of older simulations with good parameter space coverage for low-spin non-precessing binaries but limited accuracy, and a much smaller number of longer, more recent simulations limited to non-spinning black holes. In this paper, we present long, accurate numerical waveforms for three new systems that include rapidly spinning black holes, and one precessing configuration. Here, we study in detail the accuracy of the simulations, and in particular perform for the first time in the context of BHNS binaries a detailed comparison of waveform extrapolation methods to the results of Cauchy Characteristic Extraction. The new waveforms have <0.1rad phase errors during inspiral, rising to ~(0.2-0.4)rad errors at merger, and ≲1% error in their amplitude. We compute the faithfulness of recent analytical models to these numerical results, and find that models specifically designed for BHNS binaries perform well (F>0.99) for binaries seen face-on. For edge-on observations, particularly for precessing systems, disagreements between models and simulations increase, and models that include precession and/or higher-order modes start to perform better than BHNS models that currently lack these features.

79 ASTRONOMY AND ASTROPHYSICS↗