Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Temperature modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Multilayer interface tracking model of pure tungsten oxidation

Here, we present a numerical model to predict oxide scale growth on tungsten surfaces under exposure to oxygen at high temperatures. The model captures the formation of four thermodynamically-compatible oxide sublayers, WO 2 , WO 2.72 , WO 2.9 , and WO 3 , on top of the metal substrate. Oxide layer growth is simulated by tracking the oxide/oxide and oxide/metal interfaces using a sharp-interface Stefan model coupled to diffusion kinetics. The model is parameterized using selected experimental measurements and electronic structure calculations of the diffusivities of all the oxide subphases involved. We simulate oxide growth at temperatures of 600°C and above, extracting the power law growth exponents in each case, which we find to deviate from classical parabolic growth in several cases. We conduct a comparison of the model predictions with an extensive experimental data set, with reasonable agreement at most temperatures. While many gaps in our understanding still exist, this work is a first attempt at embedding the thermodynamic and kinetic complexity of tungsten oxide growth into a comprehensive mesoscale kinetic model that attempts to capture the essential features of tungsten oxidation to fill existing knowledge gaps and guide and enhance future tungsten oxidation models.

36 MATERIALS SCIENCE↗

Coupled Experimental and High-Temperature Discrete-Element Method Modeling Studies of Aluminosilicate Particle Handling in Concentrated Solar Power Environments

Chemically inert, aluminosilicate based particles have been investigated as both a thermal transport and sensible energy storage medium for concentrated solar power facilities. These particles will experience a wide range of operating temperatures (300-1000 K) and handling conditions (dense to dilute falling particle curtains, dense granular flows, or dense structures), requiring specially-designed and optimized infrastructures. The relative influence of collisional and frictional interactions between particles varies based on temperature-dependent particulate properties and greatly impacts the bulk, granular flow behavior. These underlying physics are captured using discrete element method modeling tools. However, this modeling method is computationally expensive as each particle position and interaction is tracked during the simulation. These modeling methods are further complicated by introducing temperature-dependent particle properties, high-temperature radiative exchange, and directional irradiation sources experienced by granular flows in concentrated solar power environments. Coupled experimental and numerical studies of aluminosilicate particles in rotary kilns and dense particle curtains were performed for bulk temperatures up to 1073 K. The three particle types investigated included Carbobead HSP 30 /60, Carbobead CP 30/60, and Granusil 4030. Temperature, spatial, and velocity profile data were extracted from experimental runs using embedded K-type thermocouple probes and particle image velocimetry techniques. Experimental and numerical studies were compared using spatial temperature profiles, velocity fields, and shape profiles of the bulk, granular flows. Numerical models were developed using commercially available discrete element method modeling software, Aspherix®. Existing Aspherix® functionality was expanded by introducing coupled radiative exchange modeling tools. The laboratory-scale rotary kiln was developed to investigate the steady-state heat and mass transfer performance of aluminosilicate particles based on particle type, bulk handling temperature, and wall roughness. The rotational speed of the rotary kiln was varied to control the relative impact of collisional and frictional effects upon the granular flow behavior. Heat and mass transfer performance was categorized based on the Froude number and the observed flow regimes of slipping, rolling, cascading, and centrifuging. Coupled discrete element method modeling studies were used to evaluate the effects of temperature-dependent, particulate mechanical properties upon bulk flow behavior and upon the relative effects of radiative, advective, and/or conductive heat transfer. A high-temperature (< 1073 K) falling particle curtain was similarly fabricated to investigate the heat and mass transfer performance of aluminosilicate particles in particle handling situations dominated by inter-particle collisions. The impact of particle type, flow preheat temperatures (< 1073K), and bulk mass flow rates were investigated upon the particle curtain shape, temperature, and velocity profiles. Coupled discrete element method modeling studies were performed to evaluate the varying impact of temperature-dependent, particulate mechanical properties on the bulk flow behavior and the temperature profile of the particle curtain.

14 SOLAR ENERGY↗

High Temperature Irradiation Resistant Thermocouple Drift Model Application to Commercial Thermocouples

The Advance Sensors and Instrumentation fiscal year report on the direct application of the HTIR-TC drift model on other commercial thermocouples. The Type N and K thermocouples are useful in irradiation environments up to 1100°C (or 1290°C for short bursts and/or single use), but over temperature and high fluence can cause the TCs to drift. The HTIR-TC drift model predicts the end use environment of temperature and irradiation and the total time scale to show the amount of drift a thermocouple will undergo. The model predicts that HTIR-TCs at full temperature range and fluence of 10^21 N/cm^2 will exhibit a drift of under -1%. The type N and K TCs will see a drift of -0.5% at the same fluence, but temperatures below 1100°C. Above this temperature the Type N and K TCs quickly de-calibrate and will give erroneous temperatures measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Behaviors of impurity in ITER plasma with standard type I ELMy H-mode and steady-state scenarios

Self-consistent simulations of impurity behaviors in ITER plasmas in standard Type I ELMy H-mode and steady-state scenarios are investigated using 1.5D BALDUR integrated predictive modeling code. In these simulations, the plasma core transports, including electron and ion thermal, hydrogenic and impurity transports, are predicted using a linear combination of anomalous and neoclassical transports. An anomalous transport is calculated using a theory-based Multimode (MMM95) model; while the neoclassical transport is calculated using NCLASS model. The temperature and density boundary conditions are described at the top of the pedestal. Two different models for hydrogenic and impurity boundary density conditions are considered. The first model is called a 'static boundary density model,' in which the hydrogenic and impurity densities at the boundary are fixed. For the second model, called a 'dynamic boundary density model,' the hydrogenic and impurity densities at the boundary are assumed to be a large fraction of its line-averaged density. For simplicity, the pedestal temperature is assumed to be a constant in all simulations. The combination of a core transport model together with the boundary density models is used to simulate the time evolution of plasma current, temperature, and density profiles for ITER plasmas in standard type I ELMy H-mode and steady-state scenarios. As a result, the behaviors of impurity in ITER plasmas can be investigated. It is found in both ITER scenarios that the total amount of impurity, including beryllium and helium, in plasma core increases rapidly in early state and reaches a steady-state value. The level of impurity content in the steady state depends sensitively on the impurity boundary conditions. The effective charge at the edge is found to be about 1.4 and 1.1 using a static boundary density model and a dynamic boundary density model, respectively. It is also found that the hydrogenic and impurity transports in ITER plasmas for both scenarios is dominated by the kinetic ballooning modes, while the ITG and TEM modes provide the largest contributions for both thermal transports in most of region. In addition, a sensitivity study is carried out to investigate the impacts of pedestal temperature, pedestal density and line-averaged density on the impurity behaviors. It is found that increasing the pedestal temperature results in a reduction of the impurity content. On the other hand, increasing the pedestal density, line-averaged density or impurity influx result in an increase of the impurity content.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An empirical model of the interrelationship of electron temperature and density in the daytime thermosphere at solar minimum

The AE-C satellite measurements of electron temperature and ion concentration are used to construct a model of the relationship between these parameters and its variation with altitude in the daytime, nonauroral ionosphere. The major features of the model are that electron temperature is independent of ion concentration at altitudes below 200 km and that electron temperature varies inversely with ion concentration above perhaps 250 km. This behavior is qualitatively consistent with current theoretical models of ionospheric heating and cooling.

Brace, L. H.↗

Unified Material-Environment Interaction Model for Binary UHTC Composites

A new model for the surface chemistry of zirconium and hafnium diborides containing silicon-carbide when exposed to high temperature conditions in air is formulated. Oxidation dynamics are simplified by considering the diffusion-limited equilibrium regime within the material at elevated temperatures. This model is first assessed against experimental mass-gain data taken from UHTC samples heated to high temperature in an oxygen environment. Then, further evaluations of the new model are conducted using hypersonic CFD simulations to analyze conditions experienced by HfB2-SiC in arc jet experiments conducted at NASA Ames Research Center. Measurements of stagnation point heat transfer and pressure are then used to calibrate the simulations. Results of coupled CFD-material response simulations are then compared to the surface temperatures measured during the Ames arc jet test. Results support the use of the proposed model while highlighting the need for improved gas-phase data on the additional constituents considered.

ultra high temperature ceramic↗

Sintering and collapse of synthetic coal ash and slag cones as observed through constant heating rate optical dilatometry

Ash agglomeration and slagging are responsible for costly maintenance problems in coal-fired boilers. Boiler design and operation rely on critical ash fusion temperatures defined by geometric criteria that explicitly ignore shrinkage or warping. Reproducibility of ash fusion test (AFT) results is known to be a major problem, given the subjective nature of some criteria used in critical temperature reporting. Decades of faulty predictions based on AFT data underscore the need for an objective measure of the likelihood for agglomeration and slagging as a function of coal ash composition and temperature. Heating microscopes and ash fusibility determinators are AFT instruments that are widely available and readily adapted for optical dilatometry of ash cones through digital image analysis. Optical dilatometry enables the continuous measurement of cone height and face area, and the calculation of changes in cone volume and density as a function of temperature during constant heating. A strong correlation was found between the sintering onset temperatures of two synthetic ash compositions measured through optical dilatometry and their corresponding solidus temperatures predicted through thermophysical modeling. The sintering onset temperatures of synthetic slag cones appears consistent with glass transition temperatures estimated using the Kauzmann-Beaman rule. Cone collapse is highly correlated with softening, hemispherical, and fluid temperatures for ash cones. Rapid changes in solid, liquid, and gas volume fractions near the collapse temperature suggest that a transition from capillary to slurry state may play an important role in triggering collapse. Slag cone collapse is better explained by a decrease in viscosity as a function of temperature in the glass working range. Furthermore, the sintering onset temperature and cone collapse temperature are readily understood through thermophysical modeling based on ash composition and provide two additional critical temperatures in the modeling of coal ash agglomeration and slagging.

01 COAL, LIGNITE, AND PEAT↗

Replica symmetry breaking for the integrable two-site Sachdev–Ye–Kitaev model

We analyze a two-body non-Hermitian two-site Sachdev–Ye–Kitaev (SYK) model with the couplings of one site complex conjugated to the other site. This model, with no explicit coupling between the sites, shows an infinite number of second-order phase transitions, which is a consequence of the factorization of the partition function into a product over Matsubara frequencies. We calculate the quenched free energy in two different ways: first in terms of the single-particle energies and second by solving the Schwinger–Dyson equations of the two-site model. The first calculation can be done entirely in terms of a one-site model. The conjugate replica enters due to non-analyticities when Matsubara frequencies enter the spectral support of the coupling matrix. The second calculation is based on the replica trick of the two-site partition function. Both methods give the same result. The free-fermion partition function can also be rephrased as a matrix model for the coupling matrix. Up to minor details, this model is the random matrix model that describes the chiral phase transition of QCD, and the order parameter of the two-body model corresponds to the chiral condensate of QCD. Comparing to the corresponding four-body model, we are able to determine which features of the free energy are due to the chaotic nature of the four-body model. The high-temperature phase of both models is entropy dominated, and in both cases, the free energy is determined by the spectral density. The chaotic four-body SYK model has a low-temperature phase whose free energy is almost temperature-independent, signaling an effective gap of the theory even though the actual spectrum does not exhibit a gap. On the other hand, the low-temperature free energy of the two-body SYK model is not flat; in fact, it oscillates to arbitrarily low temperature. This indicates a less desirable feature that the entropy of the two-body model is not always positive in the low-temperature phase, which most likely is a consequence of the non-hermiticity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The development and validation of a simple snow model for the GISS GCM

Five years of meteorological and hydrological data from a typical New England watershed where winter snow cover is significant were used to drive and validate two off-line land surface schemes suitable for use in the Goddard Institute for Space Studies (GISS) general circulation model (GCM): a baseline scheme that does not model the physics of a snowpack and therefore, neglects the insulating properties of snow cover; and a modified scheme in which a three-layer snowpack is modeled. Comparing baseline model results with validation data reveals several model deficiencies. Surface radiation temperatures could not adequately be modeled and the ground froze to unreasonable depths. Furthermore, because of ground cooling resulting from large surface heat fluxes to the atmosphere from the uninsulated surface, deeper model layers did not unfreeze until midsummer. As such, the normal hydrologic processes of runoff, ground water infiltration, and movement, etc., are compromised for a good part of the year. With the inclusion of a simple three-layer snow model into the baseline model, not only are the ground and surface radiation temperatures adequately modeled but all the features of snowpack ripening that characterize pack growth/ablation are simulated.

Lynch-Stieglitz, Marc↗

Areas with Surface Thermal Anomalies as Detected by ASTER and LANDSAT Data around South Canyon Hot Springs, Garfield County, Colorado

This map shows areas of anomalous surface temperature around South Canyon Hot Springs as identified from ASTER and LANDSAT thermal data and spatial based insolation model. The temperature for the ASTER data was calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas having anomalous temperature in the ASTER data are shown in blue diagonal hatch, while areas having anomalous temperature in the LANDSAT data are shown in magenta on the map. Thermal springs and areas with favorable geochemistry are also shown. Springs or wells having non-favorable geochemistry are shown as blue dots.

15 GEOTHERMAL ENERGY↗

Photon Induced Reaction Cross-Section Calculations of Several Structural Fusion Materials

In this paper; photo-neutron cross-sections have been computed for {sup 27}Al, {sup 28,29}Si, {sup 52}Cr, {sup 54,56}Fe isotopes by using nuclear reaction codes TALYS 1.6 and EMPIRE 3.1 with different level density models. Constant Temperature Fermi Gas, Back Shifted Fermi Gas and Generalized Superfluid Models have been employed from TALYS 1.6 whereas Generalized Super Fluid Model was the only model employed from EMPIRE 3.1 reaction codes. Obtained results have been analyzed with experimental values taken from the EXFOR database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermal stress in degraded forests in the Brazilian Amazon Arc of Deforestation

Understanding thermal stress in tropical forests has taken on new urgency in light of accelerating climate change and expansion of deforestation and forest degradation. Degraded tropical forests in particular may be approaching critical temperature thresholds even more rapidly than intact forests, with implications for tree survival and ecosystem recovery. We investigate thermal stress in degraded tropical forests within the Brazilian Amazon Arc of Deforestation. Using land surface temperature data from the ECOsystem Spaceborne Thermal Radiometer Experiment on the international Space Station (ECOSTRESS), we compared canopy temperatures of intact, selectively logged, and burned forests in Feliz Natal, Mato Grosso, Brazil. Upper canopy temperatures in previously burned forests were 4.1% higher (mean = 36.5 °C) and 50.9% more variable compared to intact and logged forests, which showed remarkably similar temperature distributions (means of 34.9 °C and 35.1 °C, respectively). Modeled leaf temperature distributions based on canopy temperature measurements from one of the warmest days in a 2 year dry season record indicated that 87% of leaves in the warmest burned forest patches exceeded the temperature threshold where respiration surpasses photosynthesis, compared to approximately 72%–74% in intact and logged forests, respectively, in the same time period. After controlling for environmental factors, burned forests were predicted to be 2.6 °C warmer on average [1.39 °C–3.96 °C, 95% credible interval] than intact forests across a 5–40 m canopy height range. Burned forests showed modest thermal recovery over time, with temperatures decreasing by approximately 1.2 °C over a 30 year recovery period. In contrast, logged forests showed minimal thermal differences from intact forests (−0.353 on average, [−1.125–0.274, 95% credible interval]) and negligible change (0.15 °C) over the same timeframe. While the absolute probabilities of exceeding damaging thermal thresholds remain low across all forest types under current climate conditions, the probability of leaves exceeding temperatures that cause permanent leaf damage was ten times higher in burned forests, with implications for the future of burned forest regeneration in water-limited regions of the Amazon basin. In particular, the combination of higher mean temperatures, greater temperature variability, and more frequent exposure to damaging thermal thresholds implies that burned tropical forests will experience substantially higher mortality rates and slower biomass recovery compared to intact and selectively logged forests, especially in water-limited regions where trees cannot rely on evaporative cooling to moderate canopy temperatures.

Brazilian Amazon Arc of Deforestation↗

Spectral variability of Cygnus X-2 - Structure in the circumsource material

Cygnus X-2 was observed during 13 separate pointings in the course of 1 yr by the Einstein monitor proportional counter. During one of these pointings the objective grating spectrometer was also used. It is found that the data from these observations are well fitted by single-component thermal bremsstrahlung models with temperatures ranging from 4-12 keV; however, two-component models, where one component is a blackbody, are not excluded. The X-ray light curve appears to be correlated with the 9.843 day optical period, possibly implying a partial eclipse of the X-ray source. During the high states there are irregular dips of up to 30 percent in intensity that last for 300-700 s. The high spectra resolution grating data were taken during one of the high states when these dips occurred, and it is possible to distinguish variable variable emission and absorption features due to Fe, O, and Ne. The picture of Cygnus X-2 is consistent with an intrinsic thermal source surrounded by a hot accretion disk corona. This model can be used to explain the high and low X-ray states, the variability within the states, and the intensity dips which occur in the high states.

Vrtilek, S. D.↗

Constraints on the origin of the ultraviolet upturn in elliptical galaxies from Hopkins Ultraviolet Telescope observations of NGC 1399

Results are presented of observations of the giant elliptical galaxy NGC 1399 in December 1990, which provide measurements of the spectral energy distribution of the elliptical galaxy and allow detection of absorption features in the sub-2000-A UV. The spectrum shows no emission features other than well-known geocoronal lines. Strong Lyman series absorption is evident at the galaxy redshift. Other absorption features attributable to the hot stellar population are detected, but there is no evidence of C IV 1548, 1551 absorption. Thse data are used to set constraints on the origin of the UV upturn in elliptical galaxies. The lack of detectable C IV absorption and the shape of the continuum spectrum exclude star formation with a standard IMF as the sole contributor to the 1550-A flux. The observed continuum flux decreases from 1050 A to the Lyman limit, indicating that the light is dominated by stars with temperatures less than 25,000 K. For star-formation models, this temperature puts the main-sequence turnoff near B0, implying either that star formation ended about 2 x 10 exp 7 yr ago, or that stars are currently forming with a truncated IMF.

Ferguson, Henry C.↗

Design optimization and probabilistic analysis of a hydrodynamic journal bearing

A nonlinear constrained optimization of a hydrodynamic bearing was performed yielding three main variables: radial clearance, bearing length to diameter ratio, and lubricating oil viscosity. As an objective function a combined model of temperature rise and oil supply has been adopted. The optimized model of the bearing has been simulated for population of 1000 cases using Monte Carlo statistical method. It appeared that the so called 'optimal solution' generated more than 50 percent of failed bearings, because their minimum oil film thickness violated stipulated minimum constraint value. As a remedy change of oil viscosity is suggested after several sensitivities of variables have been investigated.

Liniecki, Alexander G.↗

Use of the Long Duration Exposure Facility's thermal measurement system for the verification of thermal models

The Long Duration Exposure Facility (LDEF) postflight thermal model predicted temperatures were matched to flight temperature data recorded by the Thermal Measurement System (THERM), LDEF experiment P0003. Flight temperatures, recorded at intervals of approximately 112 minutes for the first 390 days of LDEF's 2105 day mission were compared with predictions using the thermal mathematical model (TMM). This model was unverified prior to flight. The postflight analysis has reduced the thermal model uncertainty at the temperature sensor locations from +/- 40 F to +/- 18 F. The improved temperature predictions will be used by the LDEF's principal investigators to calculate improved flight temperatures experienced by 57 experiments located on 86 trays of the facility.

Berrios, William M.↗

Dataset for "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantification" Willard et al. (2025).

This data release provides all data and code used in the paper " "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantifications" Willard et al. (2025)" to model stream temperature, evaluate, and assess results. The associated manuscript explores the effect of different ensemble construction techniques across different common machine learning (ML) architectures for predictions in unmonitored basins. Modeling was done using long short-term memory (LSTM), gated recurrent unit (GRU), temporal convolution network (TCN), and extreme gradient boosting (XGBoost) models, and stream site coverage spans 1362 locations across the conterminous United States. The ensemble construction techniques investigated include ensemble by random weight initialization, differing hyperparameters, different random subsets of training data, different subselections of input features, different architectures, and Monte Carlo Dropout. The data is organized into these items items:Code repository and data for the paper " "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantifications" Willard et al. (2025).Code: stream_temp_ml_regionalization.zip contains the code repositoryData to run the code:- data_dir.zip -- contains all files that should be moved to the "DATA_DIR" variable defined in the "set_env_vars.sh" script in the code repository- metadata_dir.zip -- contains all files that should be moved to the "METADATA_DIR" variable defined in the "set_env_vars.sh" script in the code repositoryData produced by the code and used in the paper:- outputs_dir.zip - contains model output and results (outputs_dir/results), model weights (outputs_dir/models), and all other outputs used for the paper including feature importances.To cite this code, please use the following BibTeX or MLA entries:bibtex:@misc{willard2025streamensembles,author = {Jared Willard and Charuleka Varadharajan},title = {Dataset for "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantification"},year = {2024},doi = {10.15485/2527393},publisher = {ESS-DIVE Repository},url = {https://data.ess-dive.lbl.gov/datasets/doi:10.15485/2527393}}MLA: Willard, Jared, et al. Dataset for "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantification". 2025. ESS-DIVE Repository, doi:10.15485/2448016.

54 ENVIRONMENTAL SCIENCES↗

Temperature Dependent Modal Test/Analysis Correlation of X-34 Fastrac Composite Rocket Nozzle

A unique high temperature modal test and model correlation/update program has been performed on the composite nozzle of the FASTRAC engine for the NASA X34 Reusable Launch Vehicle. The program was required to provide an accurate high temperature model of nozzle for incorporation into the engine system structural dynamics model for loads calculation; this model is significantly different from the ambient case due to the large decrease in composite material properties due to heating. The modal test was enabled by piggybacking onto a hot-fire test of the nozzle at NASA/Marshall and tracking the natural frequencies as they decreased. A series of high fidelity modal tests and finite element model correlation of the nozzle in a free-free configuration was initially performed. This model was then attached to a modal-test verified model of the engine hot-fire test stand and the' ambient system mode shapes identified. A reduced set of accelerometers was then attached to the nozzle, the engine fired full-duration, and the frequency peaks corresponding to the ambient nozzle modes individually isolated and tracked. To update the finite element model of the nozzle to these frequency curves, a multiplicative factor was. applied to the rate of decline of the composite material property versus temperature table. This new property table was used to create high-temperature nozzle models corresponding to 10 second engine operation increments and tied into the engine system model for loads determination.

Brown, Andrew M.↗