Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TABLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

SU-E-T-442: Geometric Calibration and Verification of a GammaPod Breast SBRT System

Purpose: The first GammaPod™ unit for prone stereotactic treatment of early stage breast cancer has recently been installed and calibrated. Thirty-six rotating circular Co-60 beams focus dose at an isocenter that traverses throughout a breast target via continuous motion of the treatment table. The breast is immobilized and localized using a vacuum-assisted stereotactic cup system that is fixed to the table during treatment. Here we report on system calibration and on verification of geometric and dosimetric accuracy. Methods: Spatial calibration involves setting the origin of each table translational axis within the treatment control system such that the relationship between beam isocenter and table geometry is consistent with that assumed by the treatment planning system. A polyethylene QA breast phantom inserted into an aperture in the patient couch is used for calibration and verification. The comparison is performed via fiducial-based registration of measured single-isocenter dose profiles (radiochromic film) with kernel dose profiles. With the table calibrations applied, measured relative dose distributions were compared with TPS calculations for single-isocenter and dynamic (many-isocenter) treatment plans. Further, table motion accuracy and linearity was tested via comparison of planned control points with independent encoder readouts. Results: After table calibration, comparison of measured and calculated single-isocenter dose profiles show agreement to within 0.5 mm for each axis. Gamma analysis of measured vs calculated profiles with 3%/2mm criteria yields a passing rate of >99% and >98% for single-isocenter and dynamic plans respectively. This also validates the relative dose distributions produced by the TPS. Measured table motion accuracy was within 0.05 mm for all translational axes. Conclusion: GammaPod table coordinate calibration is a straightforward process that yields very good agreement between planned and measured relative dose distributions. The dynamic table motions used for dose painting are consistent with planned control points. CY, YN, PM, PH are employees of Xcision Medical Systems.

60 APPLIED LIFE SCIENCES↗

ECDSA B-233 with Precomputation 1.0 Beta Version

This software, written in C, performs two functions: 1) the generation of digital signatures using ECDSA with the B-233 curve and a table of precomputed values, and 2) the generation and encryption of a table of precomputed values to support the generation of many digital signatures. The computationally expensive operations of ECDSA signature generation are precomputed, stored in a table, and protected with AES encryption. This allows digital signatures to be generated in low-power, computationally-constrained environments, such as are often found in non-proliferation monitoring applications. The encrypted, precomputed table and digital signature generation software are used to provide public key data authentication for sensor data. When digital data is presented for signing, a set of values from the table is decrypted and used to generate an ECDSA digital signatureThis software, written in C, performs two functions: 1) the generation of digital signatures using ECDSA with the B-233 curve and a table of precomputed values, and 2) the generation and encryption of a table of precomputed values to support the generation of many digital signatures. The computationally expensive operations of ECDSA signature generation are precomputed, stored in a table, and protected with AES encryption. This allows digital signatures to be generated in low-power, computationally-constrained environments, such as are often found in non-proliferation monitoring applications. The encrypted, precomputed table and digital signature generation software are used to provide public key data authentication for sensor data. When digital data is presented for signing, a set of values from the table is decrypted and used to generate an ECDSA digital signature

Draelos, Timothy↗

Fox Trails

1. This software utilizes python pandas to pull data from P6 databases or XER files. The software transforms the datasets into multiple main tables by joining, filtering, iteratively flattening hierarchical structured data, and pivoting datasets to give simple flat output tables. The activity table includes all of the information related to an activity including activity codes, global, EPS, and project codes, UDFs, and WBS information as separate columns. This includes the code id, code value and sequence number for all levels in hierarchical codes. The resource table is similar to the activity table and includes all of the information related to resources on activities including UPFs and resource codes. The resource time phased table takes the resource information and time phases it for the budget, forecast, late, and actual dates/units/costs that closely matches P6's user interface's values as it implements the resource curve and calendars. The wbs table contains the WBS structure broken out by levels and includes UDFs, codes, and notebook topics. The final P6 data table is the relationships table which simply contains the relationships. 2. When a user updates the tool with data (via giving it P6 project names with database username/password information or XER files) the system creates the data in #1, then creates a networkx graph with the activity data imbedded in the node data and the relationships added as edges. Each edge also has it's float calculated (working time distance between the predecessor and successor) and attached to the edge. Activities are also tagged as a potential start of a path based on their constraints, constraint dates, remaining start date, and activity status. When a user enters an activity ID into the UI, it runs a shortest path calculation on the network graph between each node tagged as potential start to the entered activity id based on the float tagged on the edge. Each path returned by the algorithm contains all of the nodes on the path in order, as well as the total float of the edges that make the path. This data is then collected and returned to the user in the form of a gantt chart with groupings for each path that includes the total float for each group. 3. Similar to 2, if the user passes through a reference dataset each activity set in the path is checked to see if it had a path in the reference dataset, if that path was the primary path between the start and end activities, and what has changed regarding logic and durations. These changes are color coded and summarized before sent to the user to be displayed by the UI for simple discovery. 4. Utilizing the data from #1, the user can submit desired grouping code(s) and filters to the system. The system will then pull the activities, resources, and relationships and create a gantt chart based on the groupings sent and filtered based on the filters sent. 5. The system will produce a gantt chart in a similar method to #4, but allows interactivity with the data. As the user interacts with the gantt chart, the software captures the changes and stores it with the user making the change so that project controls and implement those changes in P6.

Fox, Ben↗

Performance Assessment for the E-Area Low-Level Radioactive Waste Disposal Facility at the Savannah River Site: Appendix F

As a supplement to Chapter 6, Section 6.1.1.3, Table F-1 through Table F-24 provide tabular results of the sensitivity analysis calculations for waste disposal timing (Sensitivity Case S6) in NR07E (Cases 3 and 4) and NR26E (Cases 1 through 4). The title of each table identifies the DU, sensitivity case, and performance measure. Section F.1.1 (Table F-1 through Table F-8) presents results for NR07E and Section F.1.2 (Table F-9 through Table F-24) presents results for NR26E. In each table, radionuclides are sorted from highest to lowest nominal concentration or dose factor. Nominal values are when waste disposal occurs at the start of operations; timeline values are when waste disposal occurs at the end of operations. The differences (Δ values) in the last column of each table equal the timeline concentration or dose factor minus the nominal concentration or dose factor, where DF and CF are shorthand designations for dose factor and concentration factor, respectively.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rapid, Approximate Multi-Axis Vibration Testing [Thesis]

The aerospace industry uses vibration shaker tables to perform component durability testing. In these tests a component, piece of equipment, or entire system is attached to a shaker table where it is subjected to dynamic excitation. The goal is to understand how the article under test will perform in its service environment without having to run it through its entire service life via field testing. In a vibration test, an aerospace system or component is qualified if it is shown to survive a test meant to replicate its lifetime service conditions. The test is designed based on recorded field data. To develop a test, a system is taken through all of its intended environments, e.g., transportation, launch, and reentry. Acceleration data measured from these environments is then brought back to the lab and imported into a shaker table controller. The controller then drives a vibration test intended to mimic the acceleration conditions experienced by the system or specific components of the system in the field. However, it is often difficult to match the measured field response in a lab test. This is largely due to the test’s boundary conditions and excitation methods. In a lab test, a shaker table is the excitation source. The two most common shaker table types, differentiated by their number of independent degrees of freedom, are single-axis and multi-axis shaker tables. Multi-axis shakers have the ability to reproduce service environments more realistically, as real accelerations inevitably produce multiple degrees of freedom of excitation simultaneously. Figure 1 depicts a generic multi-axis testing setup on a three-axis shaker table. Often multi-axis tests use six-degree-of-freedom (6DOF) shaker tables. Yet multi-axis shakers are not yet common in the aerospace industry due in part to their high cost and the difficulty for shaker controllers to handle the added complexity. Single-axis shaker tables are much more common. They are not as expensive to purchase and have a wide range of control software options.

42 ENGINEERING↗

Schema Elements for Granta Annual Report: FY2024

Granta: Materials Intelligence (Granta: MI) is a commercial database software distributed by Ansys, Inc. that is utilized by the Nuclear Security Enterprise (NSE) to organize and store relevant materials data. Lack of standard and well-documented database schema is the primary obstacle to an NSE materials data management solution, so the objective of this project is to create and document such a schema. In FY21, an approach for designing, documenting, and managing a standard database schema was described based on the creation of schema elements (collections of attributes used to describe particular aspects of the data) to be used as building blocks for creating various database tables without duplication. In FY22, these methods were applied through a multi-site collaboration to create and document the schema elements necessary to build a thermogravimetric analysis (TGA) testing table. In FY23 the schema was expanded to include elements for a differential scanning calorimetry (DSC) table, along with schema for supporting metadata tables including Instruments, Projects, Documents, and Testing Series. In FY24 the following progress was made, again through multi-site collaboration: • The existing schema elements were modified to accommodate thermomechanical analysis (TMA) data, and a table, Test Data: TMA, was created for managing TMA data. • The elements necessary for the following additive manufacturing (AM) data tables (directed at data specific to selective laser sintering AM technology) were created: • AM Builds • AM Processes • AM Part Designs • Built AM Parts • AM Feedstock Materials • AM Feedstock Material Batches • The elements necessary for creating a Calibrated Material Models table were created, and the Calibrated Material Models table was created. In FY25 the existing schema will be deployed on the production enterprise Granta instance on the enterprise secure network. Schema elements will be appended, and new elements created as necessary, to allow the creation of tables specifically to support materials testing, AM process development, and design and analysis for modernization programs.

36 MATERIALS SCIENCE↗

Integrating a local database into the StarView distributed user interface

A distributed user interface to the Space Telescope Data Archive and Distribution Service (DADS) known as StarView is being developed. The DADS architecture consists of the data archive as well as a relational database catalog describing the archive. StarView is a client/server system in which the user interface is the front-end client to the DADS catalog and archive servers. Users query the DADS catalog from the StarView interface. Query commands are transmitted via a network and evaluated by the database. The results are returned via the network and are displayed on StarView forms. Based on the results, users decide which data sets to retrieve from the DADS archive. Archive requests are packaged by StarView and sent to DADS, which returns the requested data sets to the users. The advantages of distributed client/server user interfaces over traditional one-machine systems are well known. Since users run software on machines separate from the database, the overall client response time is much faster. Also, since the server is free to process only database requests, the database response time is much faster. Disadvantages inherent in this architecture are slow overall database access time due to the network delays, lack of a 'get previous row' command, and that refinements of a previously issued query must be submitted to the database server, even though the domain of values have already been returned by the previous query. This architecture also does not allow users to cross correlate DADS catalog data with other catalogs. Clearly, a distributed user interface would be more powerful if it overcame these disadvantages. A local database is being integrated into StarView to overcome these disadvantages. When a query is made through a StarView form, which is often composed of fields from multiple tables, it is translated to an SQL query and issued to the DADS catalog. At the same time, a local database table is created to contain the resulting rows of the query. The returned rows are displayed on the form as well as inserted into the local database table. Identical results are produced by reissuing the query to either the DADS catalog or to the local table. Relational databases do not provide a 'get previous row' function because of the inherent complexity of retrieving previous rows of multiple-table joins. However, since this function is easily implemented on a single table, StarView uses the local table to retrieve the previous row. Also, StarView issues subsequent query refinements to the local table instead of the DADS catalog, eliminating the network transmission overhead. Finally, other catalogs can be imported into the local database for cross correlation with local tables. Overall, it is believe that this is a more powerful architecture for distributed, database user interfaces.

Silberberg, D. P.↗

Applications of Formal Methods to Specification and Safety of Avionics Software

This report treats several topics in applications of formal methods to avionics software development. Most of these topics concern decision tables, an orderly, easy-to-understand format for formally specifying complex choices among alternative courses of action. The topics relating to decision tables include: generalizations fo decision tables that are more concise and support the use of decision tables in a refinement-based formal software development process; a formalism for systems of decision tables with behaviors; an exposition of Parnas tables for users of decision tables; and test coverage criteria and decision tables. We outline features of a revised version of ORA's decision table tool, Tablewise, which will support many of the new ideas described in this report. We also survey formal safety analysis of specifications and software.

Hoover, D. N.↗

Influence of landscape heterogeneity on water available to tropical forests in an Amazonian catchment and implications for modeling drought response: Water Available to Tropical Forest

The Amazon basin experienced periodic droughts in the past, and climate models projected more intense and frequent droughts in the future. How tropical forests respond to drought may depend on water availability, which is modulated by landscape heterogeneity. Using the one-dimensional ACME Land Model (ALM) and the three-dimensional ParFlow variably saturated flow model, a series of numerical experiments were performed for the Asu catchment in central Amazon to elucidate processes that influence water available for plant use and provide insights for improving Earth system models. Results from ParFlow show that topography has a dominant influence on groundwater table and runoff through lateral flow. Without any representations of lateral processes, ALM simulates very different seasonal variations in groundwater table and runoff compared to ParFlow even if it is able to reproduce the long-term spatial average groundwater table of ParFlow through simple parameter calibration. In the ParFlow simulations, the groundwater table is evidently deeper and the soil saturation is lower in the plateau compared to the valley. However, even in the plateau during the dry season in the drought year of 2005, plant transpiration is not water stressed in the ParFlow simulations as the soil saturation is still sufficient to maintain a soil matric potential for the stomata to be fully open. This finding is insensitive to uncertainty in atmospheric forcing and soil parameters, but the empirical wilting formulation used in the models is an important factor that should be addressed using observations and modeling of coupled plant hydraulics-soil hydrology processes in future studies.

Fang, Yilin↗

Nuclear statistical equilibrium for Type Ia supernova simulations

We solve the equations of nuclear statistical equilibrium (NSE) for the mass fractions of 443 nuclides, including the effects of temperature dependent nuclear partition functions [T. Rauscher, F. Thielemann, At. Data Nucl. Data Tables 75 (2000) 1-351] and Coulomb corrections [G. Chabrier, A.Y. Potekhin, Phys. Rev. E 58 (1998) 4941]. The resulting mass fractions are then convolved with the new weak interaction rates for pf-shell nuclei based on large-scale shell model calculations [K. Langanke, G. Martinez-Pinedo, At. Data Nucl. Data Tables 79 (2001) 1-46] to get the rate of neutronization and the specific neutrino luminosity of matter in NSE. We present tables of the results and give examples of how the tables can be used in Type Ia supernova simulations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Review of Particle Physics

The Review summarizes much of particle physics and cosmology. Using data from previous editions, plus 3,062 new measurements from 721 papers, we list, evaluate, and average measured properties of gauge bosons and the recently discovered Higgs boson, leptons, quarks, mesons, and baryons. We summarize searches for hypothetical particles such as supersymmetric particles, heavy bosons, axions, dark photons, etc. All the particle properties and search limits are listed in Summary Tables. We also give numerous tables, figures, formulae, and reviews of topics such as Higgs Boson Physics, Supersymmetry, Grand Unified Theories, Neutrino Mixing, Dark Energy, Dark Matter, Cosmology, Particle Detectors, Colliders, Probability and Statistics. Among the 117 reviews are many that are new or heavily revised, including those on Pentaquarks and Inflation. The complete Review is published online in a journal and on the website of the Particle Data Group (http://pdg.lbl.gov). The printed PDG Book contains the Summary Tables and all review articles but no longer includes the detailed tables from the Particle Listings. A Booklet with the Summary Tables and abbreviated versions of some of the review articles is also available. Contents Abstract, Contributors, Highlights and Table of ContentsAcrobat PDF (150 KB) IntroductionAcrobat PDF (456 KB) Particle Physics Summary Tables Gauge and Higgs bosonsAcrobat PDF (155 KB) LeptonsAcrobat PDF (134 KB) QuarksAcrobat PDF (84 KB) MesonsAcrobat PDF (871 KB) BaryonsAcrobat PDF (300 KB) Searches (Supersymmetry, Compositeness, etc.)Acrobat PDF (91 KB) Tests of conservation lawsAcrobat PDF (330 KB) Reviews, Tables, and Plots Detailed contents for this sectionAcrobat PDF (37 KB) Constants, Units, Atomic and Nuclear PropertiesAcrobat PDF (278 KB) Standard Model and Related TopicsAcrobat PDF (7.3 MB) Astrophysics and CosmologyAcrobat PDF (2.7 MB) Experimental Methods and CollidersAcrobat PDF (3.8 MB) Mathematical Tools or Statistics, Monte Carlo, Group Theory Acrobat PDF (1.3 MB) Kinematics, Cross-Section Formulae, and PlotsAcrobat PDF (3.9 MB) Particle Listings Illustrative key and abbreviationsAcrobat PDF (235 KB) Gauge and Higgs bosonsAcrobat PDF (2 MB) LeptonsAcrobat PDF (1.5 MB) QuarksAcrobat PDF (1.2 MB) Mesons: Light unflavored and strangeAcrobat PDF (4 MB) Mesons: Charmed and bottomAcrobat PDF (7.4 MB) Mesons: OtherAcrobat PDF (3.1 MB) BaryonsAcrobat PDF (3.97 MB) Miscellaneous searchesAcrobat PDF (2.4 MB) IndexAcrobat PDF (160 KB)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SU-E-T-470: Importance of HU-Mass Density Calibration Technique in Proton Pencil Beam Dose Calculation

Purpose: Stoichiometric calibration of Hounsfield Units (HUs) for conversion to proton relative stopping powers (RStPs) is vital for accurate dose calculation in proton therapy. However proton dose distributions are not only dependent on RStP, but also on relative scattering power (RScP) of patient tissues. RScP is approximated from material density but a stoichiometric calibration of HU-density tables is commonly neglected. The purpose of this work was to quantify the difference in calculated dose of a commercial TPS when using HU-density tables based on tissue substitute materials and stoichiometric calibrated ICRU tissues. Methods: Two HU-density calibration tables were generated based on scans of the CIRS electron density phantom. The first table was based directly on measured HU and manufacturer quoted density of tissue substitute materials. The second was based on the same CT scan of the CIRS phantom followed by a stoichiometric calibration of ICRU44 tissue materials. The research version of Pinnacle{sup 3} proton therapy was used to compute dose in a patient CT data set utilizing both HU-density tables. Results: The two HU-density tables showed significant differences for bone tissues; the difference increasing with increasing HU. Differences in density calibration table translated to a difference in calculated RScP of −2.5% for ICRU skeletal muscle and 9.2% for ICRU femur. Dose-volume histogram analysis of a parallel opposed proton therapy prostate plan showed that the difference in calculated dose was negligible when using the two different HU-density calibration tables. Conclusion: The impact of HU-density calibration technique on proton therapy dose calculation was assessed. While differences were found in the calculated RScP of bony tissues, the difference in dose distribution for realistic treatment scenarios was found to be insignificant.

60 APPLIED LIFE SCIENCES↗

Becoming Reactive by Concretization

One way to build a reactive system is to construct an action table indexed by the current situation or stimulus. The action table describes what course of action to pursue for each situation or stimulus. This paper describes an incremental approach to constructing the action table through achieving goals with a hierarchical search system. These hierarchies are generated with transformations called concretizations, which add constraints to a problem and which can reduce the search space. The basic idea is that an action for a state is looked up in the action table and executed whenever the action table has an entry for that state; otherwise, a path is found to the nearest (cost-wise in a graph with costweighted arcs) state that has a mappring from a state in the next highest hierarchy. For each state along the solution path, the successor state in the path is cached in the action table entry for that state. Without caching, the hierarchical search system can logarithmically reduce search. When the table is complete the system no longer searches: it simply reacts by proceeding to the state listed in the table for each state. Since the cached information is specific only to the nearest state in the next highest hierarchy and not the goal, inter-goal transfer of reactivity is possible. To illustrate our approach, we show how an implemented hierarchical search system can completely reactive.

Prieditis, Armand↗

Application Program Interface for the Orion Aerodynamics Database

The Application Programming Interface (API) for the Crew Exploration Vehicle (CEV) Aerodynamic Database has been developed to provide the developers of software an easily implemented, fully self-contained method of accessing the CEV Aerodynamic Database for use in their analysis and simulation tools. The API is programmed in C and provides a series of functions to interact with the database, such as initialization, selecting various options, and calculating the aerodynamic data. No special functions (file read/write, table lookup) are required on the host system other than those included with a standard ANSI C installation. It reads one or more files of aero data tables. Previous releases of aerodynamic databases for space vehicles have only included data tables and a document of the algorithm and equations to combine them for the total aerodynamic forces and moments. This process required each software tool to have a unique implementation of the database code. Errors or omissions in the documentation, or errors in the implementation, led to a lengthy and burdensome process of having to debug each instance of the code. Additionally, input file formats differ for each space vehicle simulation tool, requiring the aero database tables to be reformatted to meet the tool s input file structure requirements. Finally, the capabilities for built-in table lookup routines vary for each simulation tool. Implementation of a new database may require an update to and verification of the table lookup routines. This may be required if the number of dimensions of a data table exceeds the capability of the simulation tools built-in lookup routines. A single software solution was created to provide an aerodynamics software model that could be integrated into other simulation and analysis tools. The highly complex Orion aerodynamics model can then be quickly included in a wide variety of tools. The API code is written in ANSI C for ease of portability to a wide variety of systems. The input data files are in standard formatted ASCII, also for improved portability. The API contains its own implementation of multidimensional table reading and lookup routines. The same aerodynamics input file can be used without modification on all implementations. The turnaround time from aerodynamics model release to a working implementation is significantly reduced

Robinson, Philip E.↗

Reconfigurable assembly work station

A reconfigurable autonomous workstation includes a multi-faced superstructure including a horizontally-arranged frame section supported on a plurality of posts. The posts form a plurality of vertical faces arranged between adjacent pairs of the posts, the faces including first and second faces and a power distribution and position reference face. A controllable robotic arm suspends from the rectangular frame section, and a work table fixedly couples to the power distribution and position reference face. A plurality of conveyor tables are fixedly coupled to the work table including a first conveyor table through the first face and a second conveyor table through the second face. A vision system monitors the work table and each of the conveyor tables. A programmable controller monitors signal inputs from the vision system to identify and determine orientation of the component on the first conveyor table and control the robotic arm to execute an assembly task.

42 ENGINEERING↗

Accuracy Based Generation of Thermodynamic Properties for Light Water in RELAP5-3D

RELAP5-3D interpolates to obtain thermodynamic properties for use in its internal calculations. The accuracy of the interpolation was determined for the original steam tables currently used by the code. This accuracy evaluation showed that the original steam tables are generally detailed enough to allow reasonably accurate interpolations in most areas needed for typical analyses of nuclear reactors cooled by light water. However, there were some regions in which the original steam tables were judged to not provide acceptable accurate results. Revised steam tables were created that used a finer thermodynamic mesh between 4 and 21 MPa and 530 and 640 K. The revised steam tables solved most of the problems observed with the original steam tables. The accuracies of the original and revised steam tables were compared throughout the thermodynamic grid.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

River stage influences on uranium transport in a hydrologically dynamic groundwater-surface water transition zone

In this study, a well-field within a uranium (U) plume in the groundwater-surface water transition zone was monitored for a 3 year period for water table elevation and dissolved solutes. The plume discharges to the Columbia River, which displays a dramatic spring stage surge resulting from snowmelt. Groundwater exhibits a low hydrologic gradient and chemical differences with river water. River water intrudes the site in spring. Specific aims were to assess the impacts of river intrusion on dissolved uranium (U aq ), specific conductance (SpC), and other solutes, and to discriminate between transport, geochemical, and source term heterogeneity effects. Time series trends for U aq and SpC were complex and displayed large temporal and well-to-well variability as a result of water table elevation fluctuations, river water intrusion, and changes in groundwater flow directions. The wells were clustered into subsets exhibiting common behaviors resulting from the intrusion dynamics of river water and the location of source terms. Hot-spots in U aq varied in location with increasing water table elevation through the combined effects of advection and source term location. Heuristic reactive transport modeling with PFLOTRAN demonstrated that mobilized U aq was transported between wells and source terms in complex trajectories, and was diluted as river water entered and exited the groundwater system. While U aq time-series concentration trends varied significantly from year-to-year as a result of climate-caused differences in the spring hydrograph, common and partly predictable response patterns were observed that were driven by water table elevation, and the extent and duration of river water intrusion.

54 ENVIRONMENTAL SCIENCES↗

SU-E-CAMPUS-J-06: The Impact of CT-Scan Energy On Range Uncertainty in Proton Therapy Planning

Purpose: To investigate the impact of tube potential (kVp) on the CTnumber (HU) to proton stopping power ratio (PSPR) conversion table; the range uncertainty and the dosimetric change introduced by a mismatch in kVp between the CT and the HU to PSPR table used to calculate dose are analyzed. Methods: A CIRS CT-ED phantom was scanned with a Philips Brilliance 64-slice scanner under 90kVp and 120kVp tube potentials. Two HU to PSPR curves were then created. Using Eclipse (Varian) a treatment plan was created for a single beam in a water phantom (HU=0) passing through a wedge-shaped heterogeneity (HU=1488). The dose was recalculated by changing only the HU to PSPR table used in the dose calculation. The change in range (the distal 90% isodose line) relative to a distal structure was recorded as a function of heterogeneity thickness in the beam. To show the dosimetric impact of a mismatch in kVp between the CT and the HU to PSPR table, we repeated this procedure using a clinical plan comparing DVH data. Results: The HU to PSPR tables diverge for low-density bone and higher density structures. In the phantom plan, the divergence of the tables results in a change in range of ~1mm per cm of bone in the beam path for the HU used. For the clinical plan, a mismatch in kVp showed a 28% increase in mean dose to the brainstem along with a 10% increase in maximum dose to the brainstem center. Conclusion: A mismatch in kVp between the CT and the HU to PSPR table can introduce significant uncertainty in the proton beam range. For dense bone, the measured range uncertainty is about 1mm per cm of bone in the beam. CT-scan energy verification should be employed, particularly when high-density media is in the proton beam path.

60 APPLIED LIFE SCIENCES↗