Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Silicates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

The origin of chondrules - Experimental investigation of metastable liquids in the system Mg2SiO4-SiO2

Laser-melted magnesium silicate droplets were supercooled 400-750 C below their equilibrium liquidus temperatures before crystallization and their texture was compared with that of meteoritic and lunar chondrules. Crystal morphology, width and texture were studied in relation to nucleation temperature and bulk composition. It was found that the only phase to nucleate from the forsterite-enstatite normative melts was forsterite. Highly siliceous glass, about 65% SiO2 by weight, was identified interstitially to the forsterite crystals in seven of the MgSiO4 spherules and was thought to be present in all.

Blander, M.↗
NASA NTRS1976

Preliminary results from the Viking X-ray fluorescence experiment - The first sample from Chryse Planitia, Mars

Iron, calcium, aluminum, silicon, and sulfur are major elements in the first surface sample of Mars that has been analyzed by the Viking X-ray fluorescence spectrometer. Titanium is present in minor quantities. This is consistent with the sample's being a mixture of fine silicate and oxide mineral grains, with a significant proportion of sulfates, possibly hydrated. Ferric oxide is regarded as the red pigmenting agent on the Martian surface, but if it coats silicate grains, the coatings must be very thin or discontinuous. A high abundance of Fe, relatively low abundances of Al, Rb, Sr, and Zr, and a high Ca/K ratio are distinctive features of the spectra. Preliminary determinations indicate the following abundances (as percentages by weight): Fe, 14 plus or minus 2; Ti, less than 1; S, 2 to 5; the Ca/K ratio by weight is greater than 5.

Toulmin, P., III↗
NASA NTRS1977

Space stable thermal control coatings

Efforts to develop an engineering paint were concentrated on inorganic silicate-bonded systems as opposed to the silicone coatings. The UV-vacuum stability of potassium silicate-Zn2TiO4 paints were shown to be quite good. Reflectance optimization of these systems is being studied by maximizing thickness and pigment to binder ratio.

Harada, Y.↗
NASA NTRS1977

Iron - Whence it came, where it went

Determinations of the abundances of iron and related elements in the photosphere, chromosphere, and corona of the sun as well as in solar and galactic cosmic rays are reviewed and compared with abundances derived from meteoritic data. Observed solar system abundances are found to be in accord with predictions of nucleosynthesis under either hydrostatic or explosive conditions but cannot yet be used to define these processes uniquely. The distribution of iron among planets and meteorites can probably be adequately modelled by condensation and fragmentation under equilibrium conditions above about 700 K, but below that temperature it is likely that inhibited solid-state diffusion perturbed attainment of equilibrium. Pertinent factors which are presently unknown include the mechanism responsible for metal-silicate fractionation, the grain size achieved by metallic iron in the nebula, and whether iron-bearing silicate formed prior to accretion.

Kerridge, J. F.↗
NASA NTRS1978

Studies and testing of antireflective (AR) coatings for soda-lime glass

Processes for producing antireflection films on glass are concentrated in three areas: acid etching of glass, plasma etching of glass, and acid development of sodium silicate films on glass. The best transmission was achieved through the acid etching technique, while the most durable films were produced from development of sodium silicate films. Control of the acid etching technique is presently inadequate for production implementation. While films having excellent antireflective properties were fabricated by plasma etching techniques, all were water soluble.

Pastirik, E. M.↗
NASA NTRS1977

Metallic phases in the Luna 24 soil samples

The metal and sulfide phases in the Luna 24 soil samples were studied with the optical microscope and the electron microprobe. The compositions of the metal particles fall into three groups based on their Ni and Co contents: (1) Samples of meteoritic composition which have undergone metamorphism on the lunar surface. (2) Samples of submeteoritic, low Ni and low Co contents, including most of the metal particles observed. These particles are contained in glass and agglutinate particles and were probably formed by the mixing of meteoritic metal with lunar metal produced by the reduction of silicates during shock-impact. (3) Samples of high-CO content probably formed by mixing of meteoritic material with high-Co metal from the mare basalt or by fractional crystallization from a metal silicate melt. The sulfide minerals were also studied. These are almost pure FeS, and crystallized from a late stage liquid in the mare basalt. Three high-Ni sulfides were also found in the glass phase of agglutinates.

Friel, J. J.↗
NASA NTRS1977

Why is a minor planet minor

A hypothesis based on the accretion model of planet formation is proposed which can explain why minor planets could not grow into full-sized planets. Temperature and impact-velocity conditions for bouncing, accumulation, and fragmentation of planetesimals are evaluated for silicate and iron planetesimals at the heliocentric distances of Mercury, Venus, earth, Mars, and the asteroid belt. The results indicate that the low-temperature environment of the asteroids very likely hampered their growth into ironlike planetesimals, which in turn inhibited the accumulation of silicate planetesimals. It is concluded that the brittleness of iron at temperatures below 200 to 250 K is the primary reason why minor planets are 'minor' and could not grow to full size.

Matsui, T.↗
NASA NTRS1978

Infrared observations of the galactic center. IV - The interstellar extinction

Infrared observations of the compact sources and background in the galactic center are used to derive the 1.25-12.5-micron interstellar extinction law. The depth of the interstellar 10-micron silicate absorption feature is derived from observations of the M supergiant IRS 7. The ratio of visual to silicate extinction is found to be 8 + or - 3. From the colors of individual sources and the background, it is concluded that there are no more than 6 mag of visual extinction within the central 3 pc of the galactic center.

Becklin, E. E.↗
NASA NTRS1978

Implications of liquid-liquid distribution coefficients to mineral-liquid partitioning

In order to evaluate the influence of a silicate liquid structure on mineral-liquid partitioning, element partitioning data is obtained for coexisting anhydrous immiscible granitic and ferrobasaltic magmas. It is found that: (1) mineral-liquid distribution coefficients indicate the competition of crystal and liquid for cation incorporation, (2) increased polymerization of the residual liquid during crystal-liquid fractionation increases the mineral-liquid distribution coefficients for high-charge-density cations, (3) incompatible element ratios of low- and high-charge-density cations may vary during crystal-liquid fractionation because of changes in the melt composition and structure, (4) relative solubilities of REE's in melts do not vary with melt polymerization, (5) the changes of Sm/Eu ratios during crystal-liquid fractionation depend on the melt composition, and (6) minor components and volatiles can significantly influence the silicate melt structure and the mineral-liquid distribution coefficients.

Ryerson, F. J.↗
NASA NTRS1979

Study of high resistance inorganic coatings on graphite fibers

Coatings made of boron, silicon carbide, silica, and silica-like materials were studied to determine their ability to increase resistance of graphite fibers. The most promising results were attained by chemical vapor depositing silicon carbide on graphite fiber followed by oxidation, and drawing graphite fiber through ethyl silicate followed by appropriate heat treatments. In the silicon carbide coating studies, no degradation of the graphite fibers was observed and resistance values as high as three orders of magnitude higher than that of the uncoated fiber was attained. The strength of a composite fabricated from the coated fiber had a strength which compared favorably with those of composites prepared from uncoated fiber. For the silica-like coated fiber prepared by drawing the graphite fiber through an ethyl silicate solution followed by heating, coated fiber resistances about an order of magnitude greater than that of the uncoated fiber were attained. Composites prepared using these fibers had flexural strengths comparable with those prepared using uncoated fibers, but the shear strengths were lower.

Galasso, F. S.↗
NASA NTRS1978

Aspects of accretion in the early solar system

If formation of planetesimals took place by particle-particle interactions, rather than within gravitational instabilities, these interactions must have occurred at low relative velocities, leading to rates of growth which were two to three orders of magnitude slower than those characteristic of accretion within gravitational instabilities. Sticking efficiencies during particle-particle interactions are problematical, although early stages of growth were probably dominated by contact forces. Differences in accretion efficiency of metal and silicate particles probably led to the metal-silicate fractionation recorded in the composition of chondritic meteorites. It is likely that chondrules were made by particle-particle collisions prior to final accretion of planetesimals. This would have required a period of high relative velocities in an epoch otherwise characterized by low inter-particle velocities.

Kerridge, J. F.↗
NASA NTRS1979

Electrochemistry of lunar rocks

Electrolysis of silicate melts has been shown to be an effective means of producing metals from common silicate materials. No fluxing agents need be added to the melts. From solution in melts of diopside (CaMgSi2O6) composition, the elements Si, Ti, Ni, and Fe have been reduced to their metallic states. Platinum is a satisfactory anode material, but other cathode materials are needed. Electrolysis of compositional analogs of lunar rocks initially produces iron metal at the cathode and oxygen gas at the anode. Utilizing mainly heat and electricity which are readily available from sunlight, direct electrolysis is capable of producing useful metals from common feedstocks without the need for expendable chemicals. This simple process and the products obtained from it deserve further study for use in materials processing in space.

Lindstrom, D. J.↗
NASA NTRS1978

A low cost, durable anti-reflective film for solar collectors

The physics of reflection reduction by thin films is briefly reviewed. Current techniques for the production of anti-reflective coatings are surveyed with respect to their applicabilities to solar panel covers. Techniques for the production of suitable anti-reflection coatings based on acid-hardened sodium silicate solutions are presented along with optical data for both acid-leached and silicate coatings

Pastirik, E. M.↗
NASA NTRS1979

Pyroxene-melt equilibria

A thermodynamic analysis of pyroxene-melt equilibria is performed through use of a literature survey of analyses of high-Ca pyroxene and coexisting silicate melt pairs and analyses of low-Ca pyroxene silicate melt pairs. Reference is made to a modified version of a model developed by Bottinga and Weill (1972) which more successfully accounts for variations in melt composition than does a model which considers the melt to be composed of simple oxides which mix ideally. By using a variety of pyroxene melt relations, several pyroxene-melt and low-Ca pyroxene-high-Ca pyroxene geothermometers are developed which have internally consistant precisions of approximately + or - 20 C. Finally, it is noted that these equations may have application in modeling the evolution of mineral compositions during differentiation of basaltic magmas.

Nielsen, R. L.↗
NASA NTRS1979

Core cooling by subsolidus mantle convection

Although vigorous mantle convection early in the thermal history of the earth is shown to be capable of removing several times the latent heat content of the core, a thermal evolution model of the earth in which the core does not solidify can be constructed. The large amount of energy removed from the model earth's core by mantle convection is supplied by the internal energy of the core which is assumed to cool from an initial high temperature given by the silicate melting temperature at the core-mantle boundary. For the smaller terrestrial planets, the iron and silicate melting temperatures at the core-mantle boundaries are more comparable than for the earth; the models incorporate temperature-dependent mantle viscosity and radiogenic heat sources in the mantle. The earth models are constrained by the present surface heat flux and mantle viscosity and internal heat sources produce only about 55% of the earth model's present surface heat flow.

Schubert, G.↗
NASA NTRS1979

Pyroxenes from planetary basalts - Characterization of 'other' than quadrilateral components

The paper reports on a synthesis of the silicate mineralogy of a planetary basalt suite, which concerns itself only with specific aspects of pyroxene cation substitutional couples. Consideration is given to the mineral chemistry and the basalt suites in an overview fashion. Attention is given to those characteristics of pyroxene chemistry that reflect planetary constraints on the host basalts from which the pyroxenes crystallized. It is concluded that the inspection of a large number of high quality silicate analyses of pyroxenes demonstrates conclusively that these phases carry a signature of the planetary body in which they evolved. In addition, it is noted that there are planetary probes capable of constraining thermodynamic parameters that were obtained during the petrogenesis of their host basaltic liquids

Papike, J. J.↗
NASA NTRS1980

Deuterium in carbonaceous chondrites

Hydrogen isotopic compositions in seven carbonaceous chondrites lie in the range -70 to +771 per thousand relative to standard mean ocean water. These values decrease, to a range from -145 to +219 per thousand, after low-temperature oxidation in an oxygen plasma. Deuterium enrichment is therefore concentrated in the organic matter, the hydrous silicates probably lying close to the terrestrial range for such material. Calculated values for delta D of the organic fraction are +450 per thousand for Orgueil and Ivuna and up to +1600 per thousand for Renazzo. These enrichments, at least for Orgueil and Ivuna, suggest equilibration with protosolar hydrogen at very low temperatures. Assuming a value of 2.5 x 10 to the -5th for the protosolar D/H ratio, nominal equilibration temperatures of 230 K for silicates and 180 K for organic matter may be derived.

Kolodny, Y.↗
NASA NTRS1979

Aubrites - Their origin and relationship to enstatite chondrites

A study of aubrites and their origin and relationship to enstatite chondrites is presented. Aubrites contain enstatite, plagioclase, diopside, and olivine; based on similarities in bulk chemistry of the silicate portions and inferred oxygen fugacity it is shown that E6 chondrites are the most likely parent material for chondrites. It is concluded that the addition of 10% plagioclase of An15 composition to the bulk composition of the silicate portion of the aubrites results in good agreement with that of E6 chondrites.

Watters, T. R.↗