Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Growth and Post-Deposition Treatments of SrTiO 3 Films for Dye-Sensitized Photoelectrosynthesis Cell Applications

Sensitized SrTiO 3 films were observed as potential photoanodes for dye-sensitized photoelectrosynthesis cells (DSPECs). The SrTiO 3 films were grown via pulsed laser deposition (PLD) on a transparent conducting oxide (fluorine-doped tin oxide, FTO) substrate, annealed, and then loaded with zinc(II) 5,10,15-tris(mesityl)-20-[(dihydroxyphosphoryl)phenyl] porphyrin (MPZnP). When paired with a platinum wire counter electrode and an Ag/AgCl reference electrode these sensitized films exhibited photocurrent densities on the order of 350 nA/cm 2 under 0 V applied bias conditions versus a normal hydrogen electrode (NHE) and 75 mW/cm 2 illumination at a wavelength of 445 nm. The conditions of the post-deposition annealing step—namely, a high-temperature reducing atmosphere—proved to be the most vital growth parameters for increasing photocurrent in these electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of Photocatalyst Excited- and Ground-State Reduction Potentials for Dye-Sensitized HBr Splitting

Dye-sensitized bromide oxidation was investigated using a series of four ruthenium polypyridyl photocatalysts anchored to SnO 2 /TiO 2 core/shell mesoporous thin films through 2,2'-bipyridine-4,4'-diphosphonic acid anchoring groups. The ground- and excited-state reduction potentials were tuned over 500 mV by the introduction of electron withdrawing groups in the 4 and 4' positions of the ancillary bipyridine ligands. Upon light excitation of the surface-bound photocatalysts, excited-state electron injection yielded an oxidized photocatalyst that was regenerated through bromide oxidation. High injection quantum yields (Φ inj ) and regeneration quantum yields (Φ reg ) were essential to obtain efficient bromide oxidation yet required a photocatalyst that is both a potent photoreductant and a strong oxidant after excited-state injection. The four photocatalysts utilized in this manuscript ranged from unity Φ inj (1.0) and minimal Φ reg (0.037) to minimal Φ inj (0.09) and unity Φ reg (1.0). The photocatalyst that displayed the highest overall dye-sensitized photoelectrosynthesis cell performances exhibited near unity Φ reg (0.99), while a significant Φ inj was still preserved (0.59). Finally, these results highlighted the delicate interplay between the ground- and excited-state reduction potentials of photocatalysts for dye-sensitized hydrobromic acid splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge Recombination with Fractional Reaction Orders in Water-Splitting Dye-sensitized Photoelectrochemical Cells

In water-splitting dye-sensitized photoelectrochemical cells (WS-DSPECs), charge recombination competes with catalytic water oxidation to determine the overall efficiency of the system. The kinetics of these processes have been difficult to understand because transient absorbance (TA) experiments typically show nearly complete charge recombination on the sub-millisecond timescale; in contrast, electrochemical measurements such as open circuit photovoltage decay suggest a charge recombination timescale that is 2-3 orders of magnitude longer. Here we explore these processes with dye-sensitized nanocrystalline TiO 2 and TiO 2 /Ta 2 O 5 core-shell photoanodes in aqueous electrolytes using TA spectroscopy, intensity-modulated photovoltage spectroscopy (IMVS), and photoelectrochemical impedance spectroscopy (PEIS). The fast recombination rates measured by TA result from strong laser excitation that leads to high electron occupancy in TiO 2 , whereas IMVS modulates the concentration of charge-separated states near solar irradiance levels. The recombination processes measured by electrochemical methods such as IMVS, PEIS, and transient photovoltage are the discharging of injected electrons in TiO 2 , as evidenced by the close agreement betweeen the nearly first-order recombination rates probed by IMVS and the RC time constants derived from PEIS data. However, IMVS measurements at variable probe light intensity reveal that the reaction orders for the recombination of injected electrons with oxidized sensitizer molecules are far from unity. In conclusion, this kinetic analysis is relevant to understanding steady-state recombination rates in full WS-DSPECs in which molecular and nanoparticle catalysts are used to oxidize water.

14 SOLAR ENERGY↗

Pushing The Sample-Size Limit Of Infrared Vibrational Nano-Spectroscopy: From Monolayer Towards Single molecule sensitivity

While scattering-scanning near-field optical microscopy (s-SNOM) has demonstrated its potential to extend infrared (IR) spectroscopy into the nanometer scale, it has not yet reached its full potential in terms of spectroscopic sensitivity. We combine broadband femtosecond mid-IR excitation with an optimized spectral irradiance of 2 W/cm2/ cm–1 (power/area/bandwidth) and a combination of tip- and substrate enhancement to demonstrate single-monolayer sensitivity with exceptional signal-to-noise ratio. Using interferometric time domain detection, the near-field IR s-SNOM spectral phase directly reflects the molecular vibrational resonances and their intrinsic line shapes. We probe the stretching resonance of 1000 carbonyl groups at 1700 cm–1 in a self-assembled monolayer of 16-mercaptohexadecanoic acid (MHDA) on an evaporated gold substrate with spectroscopic contrast and sensitivity of 100 vibrational oscillators. From these results we provide a roadmap for achieving true single-molecule IR vibrational spectroscopy in s-SNOM by implementing optical antenna resonant enhancement, increased spectral pump power, and improved detection schemes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of CdSe -- TiO2 Nanocomposites and Their Applications to TiO2 Sensitized Solar Cells

CdSe-TiO{sub 2} nanocomposites were synthesized via aminolysis of Ti-oleate complexes in the presence of CdSe nanocrystals, and their application as sensitizers for TiO{sub 2} solar cells was investigated. The formation of CdSe-TiO{sub 2} nanocomposites was confirmed using transmission electron microscopy and Raman spectroscopy. The emission spectrum of CdSe-TiO{sub 2} nanocomposites revealed photoinduced charge separation at the CdSe-TiO{sub 2} interface of the composite. The photocurrent-voltage properties of CdSe-TiO{sub 2}-sensitized TiO{sub 2} particle films compared favorably with those of CdSe-sensitized TiO{sub 2} films. Evidence was also found indicating that the TiO{sub 2} component of the composite protects CdSe against degradation during film annealing.

14 SOLAR ENERGY↗

Direct Aerosol Forcing: Calculation from Observables and Sensitivities to Inputs

Understanding sources of uncertainty in aerosol direct radiative forcing (DRF), the difference in a given radiative flux component with and without aerosol, is essential to quantifying changes in Earth’s radiation budget. We examine the uncertainty in DRF due to measurement uncertainty in the quantities on which it depends: aerosol optical depth, single scattering albedo, asymmetry parameter, solar geometry, and surface albedo. Direct radiative forcing at the top of the atmosphere and at the surface as well as sensitivities, the changes in DRF in response to unit changes in individual aerosol or surface properties, are calculated at three locations representing distinct aerosol types and radiative environments. The uncertainty in DRF associated with a given property is computed as the product of the sensitivity and typical measurement uncertainty in the respective aerosol or surface property. Sensitivity and uncertainty values permit estimation of total uncertainty in calculated DRF and identification of properties that most limit accuracy in estimating forcing. Total uncertainties in modeled local diurnally averaged forcing range from 0.2 to 1.3 Wm-2 (42 to 20%) depending on location (from tropical to polar sites), solar zenith angle, surface reflectance, aerosol type, and aerosol optical depth. The largest contributor to total uncertainty in DRF is usually single scattering albedo; however decreasing measurement uncertainties for any property would increase accuracy in DRF. Comparison of two radiative transfer models suggests the contribution of modeling error is small compared to the total uncertainty although comparable to uncertainty arising from some individual properties.

54 ENVIRONMENTAL SCIENCES↗

Soil Organic Matter Temperature Sensitivity Cannot be Directly Inferred From Spatial Gradients

Developing and testing decadal-scale predictions of soil response to climate change is difficult because there are few long-term warming experiments or other direct observations of temperature response. As a result, spatial variation in temperature is often used to characterize the influence of temperature on soil organic carbon (SOC) stocks under current and warmer temperatures. This approach assumes that the decadal-scale response of SOC to warming is similar to the relationship between temperature and SOC stocks across sites that are at quasi steady state; however, this assumption is poorly tested. We developed four variants of a Reaction-network-based model of soil organic matter and microbes using measured SOC stocks from a 4,000-km latitudinal transect. Each variant reflects different assumptions about the temperature sensitivities of microbial activity and mineral sorption. All four model variants predicted the same response of SOC to temperature at steady state, but different projections of transient warming responses. The relative importance of Q max , mean annual temperature, and net primary production, assessed using a machine-learning algorithm, changed depending on warming duration. When mineral sorption was temperature sensitive, the predicted average change in SOC after 100 years of 5 °C warming was –18% if warming decreased sorption or +9% if warming increased sorption. When microbial activity was temperature sensitive but mineral sorption was not, average site-level SOC loss was 5%. Here, we conclude that spatial climate gradients of SOC stocks are insufficient to constrain the transient response; measurements that distinguish process controls and/or observations from long-term warming experiments, especially mineral fractions, are needed.

54 ENVIRONMENTAL SCIENCES↗

How Asymmetries Between Arctic and Antarctic Climate Sensitivity Are Modified by the Ocean

Abstract We investigate how the ocean response to CO 2 forcing affects hemispheric asymmetries in polar climate sensitivity. Intermodel comparison of Phase 5 of the Coupled Model Intercomparison Project CO 2 quadrupling experiments shows that even in models where hemispheric ocean heat uptake differences are small, Arctic warming still exceeds Antarctic warming. The polar climate impact of this evolving ocean response to CO 2 forcing is then isolated using slab ocean experiments in a state‐of‐the‐art climate model. Overall, feedbacks over the Southern Hemisphere more effectively dissipate top‐of‐atmosphere anomalies than those over the Northern Hemisphere. Furthermore, a poleward shift in ocean heat convergence in both hemispheres amplifies destabilizing ice albedo and lapse rate feedbacks over the Arctic much more so than over the Antarctic. These results suggest that the Arctic is intrinsically more sensitive to both CO 2 and oceanic forcings than the Antarctic and that ocean‐driven climate sensitivity asymmetry arises from feedback destabilization over the Arctic rather than feedback stabilization over the Antarctic.

54 ENVIRONMENTAL SCIENCES↗

Estimate for GLAST LAT Milky Way Dark Matter WIMP Line Sensitivity

The LAT Dark Matter and New Physics Working group has been developing approaches for the indirect astrophysical detection of annihilation of dark matter. Our work has assumed that a significant component of dark matter is a new type of Weakly Interacting Massive Particle (WIMP). The annihilation of two WIMPs usually results in the production of many high energy gamma rays (>1 GeV) that can be well measured in the GLAST LAT if present. There is also the possibility to observe {gamma} lines from annihilation into {gamma}{gamma} and or {gamma}Z final states. In popular SUSY theories these line decays occur at the 10{sup -4} to 10{sup -2} branching fraction level. Estimates of LAT sensitivity (at 5{sigma} above background) and upper limits (upper limit at the 95% confidence level) to these WIMP lines will be presented. These sensitivities are given in photons/cm2/sec/sr and so do not depend on the WIMP models. However, they do depend on the diffuse background model. The latter is derived from GALPROP[1] based on EGRET and other data in the EGRET energy range. We use extrapolations, provided by the GALPROP team to the higher energy range of 150 GeV explored in the preliminary line sensitivity study presented here. Comparison with theory depends upon the WIMP model (e.g., line energy and 1 or 2 lines), the DM halo model, and other astrophysics backgrounds. Thus estimates of the ability of the LAT to actually observe WIMP lines can vary over orders of magnitude depending upon which models are chosen.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tenfold improved sensitivity using high refractive-index substrates for surface plasmon sensing

Surface plasmon resonance sensors exploit the high sensitivity to local perturbations of plasma waves in a thin metal layer. These devices have a wide range of applications as biomedical, environmental, industrial, and homeland security. We concentrate on the theoretical aspects of the sensing principle. By calculations at various indexes of refraction we proved that using substrate material of higher index, sensitivity and dynamics range improve conspicuously. Finally, we show experimental data taken using a special transparent ceramic material of exceptionally high index of refraction n=2.04. Tests demonstrate sensitivity about one order of magnitude better than those obtained with conventional BK7 glass.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-sensitive scanning laser magneto-optical imaging system

A high-sensitive scanning laser magneto-optical (MO) imaging system has been developed. The system is mainly composed of a laser source, galvano meters, and a high-sensitive differential optical-detector. Preliminary evaluation of system performance by using a Faraday indicator with a Faraday rotation coefficient of 3.47x10{sup -5} rad/{mu}m Oe shows a magnetic sensitivity of about 5 {mu}T, without any need for accumulation or averaging processing. Using the developed MO system we have succeeded in the fast and quantitative imaging of a rotationally symmetric magnetic field distribution around an YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) strip line applied with dc-biased current, and also succeeded in the detection of quantized fine signals corresponding to magnetic flux quantum generation in a superconducting loop of an YBCO Josephson vortex flow transistor. Thus, the developed system enables us not only to do fast imaging and local signal detection but also to directly evaluate both the strength and direction of a magnetic signal.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On eigenmodes, stiffness, and sensitivity of atomic force microscope cantilevers in air versus liquids

The effect of hydrodynamic loading on the eigenmode shapes, modal stiffnesses, and optical lever sensitivities of atomic force microscope (AFM) microcantilevers is investigated by measuring the vibrations of such microcantilevers in air and water using a scanning laser Doppler vibrometer. It is found that for rectangular tipless microcantilevers, the measured fundamental and higher eigenmodes and their equivalent stiffnesses are nearly identical in air and in water. However, for microcantilevers with a tip mass or for picket shaped cantilevers, there is a marked difference in the second (and higher) eigenmode shapes between air and water that leads to a large decrease in their modal stiffness in water as compared to air as well as a decrease in their optical lever sensitivity. These results are explained in terms of hydrodynamic interactions of microcantilevers with nonuniform mass distribution. The results clearly demonstrate that tip mass and hydrodynamic loading must be taken into account in stiffness calibration and optical lever sensitivity calibration while using higher-order eigenmodes in dynamic AFM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Changes in CR-39 proton sensitivity due to prolonged exposure to high vacuums relevant to the National Ignition Facility and OMEGA

When used at facilities like OMEGA and the NIF, CR-39 is exposed to high vacuum environments before and after irradiation by charged particles and neutrons. Using an electrostatic linear accelerator at MIT, studies have been conducted to investigate the effects of high vacuum exposure on the sensitivity of CR-39 to fusion protons in the {approx}1-9 MeV energy range. High vacuum conditions, of order 10{sup -5} Torr, experienced by CR-39 samples at these facilities were emulated. It is shown that vacuum exposure times longer than {approx}16 h before proton irradiation result in a decrease in proton sensitivity, whereas no effect was observed for up to 67 h of vacuum exposure after proton irradiation. CR-39 sensitivity curves are presented for samples with prolonged exposure to high vacuum before and after proton irradiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High mass resolution time of flight mass spectrometer for measuring products in heterogeneous catalysis in highly sensitive microreactors

We demonstrate a combined microreactor and time of flight system for testing and characterization of heterogeneous catalysts with high resolution mass spectrometry and high sensitivity. Catalyst testing is performed in silicon-based microreactors which have high sensitivity and fast thermal response. Gas analysis is performed with a time of flight mass spectrometer with a modified nude Bayard-Alpert ionization gauge as gas ionization source. The mass resolution of the time of flight mass spectrometer using the ion gauge as ionization source is estimated to m/{Delta}m > 2500. The system design is superior to conventional batch and flow reactors with accompanying product detection by quadrupole mass spectrometry or gas chromatography not only due to the high sensitivity, fast temperature response, high mass resolution, and fast acquisition time of mass spectra but it also allows wide mass range (0-5000 amu in the current configuration). As a demonstration of the system performance we present data from ammonia oxidation on a Pt thin film showing resolved spectra of OH and NH{sub 3}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Determination of {sup 16}O and {sup 18}O sensitivity factors and charge-exchange processes in low-energy ion scattering

Quantitative analysis in low-energy ion scattering (LEIS) requires an understanding of the charge-exchange processes to estimate the elemental sensitivity factors. In this work, the neutralization of He{sup +} scattered by {sup 18}O-exchanged silica at energies between 0.6 and 7 keV was studied. The process is dominated by Auger neutralization for E{sub i} < 0.8 keV. An additional mechanism starts above the reionization threshold. This collision-induced neutralization becomes the dominant mechanism for E{sub i} > 2 keV. The ion fractions P{sup +} were determined for Si and O using the characteristic velocity method to quantify the surface density. The {sup 18}O/{sup 16}O sensitivity ratio indicates an 18% higher sensitivity for the heavier O isotope.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large sensitivity enhancement in semiconducting organic field effect transistor sensors through incorporation of ultra-fine platinum nanoparticles

We report remarkable improvement in sensitivity of pentacene-based field effect transistor devices towards trace nitro-aromatic explosive vapors through the incorporation of high density, sub-2 nm platinum nanoparticles (NPs) within these structures. Exploiting the unique electronic properties of these NPs, we have demonstrated a detection limit of 56.6 parts per billion of 2,4-dinitrotoluene (DNT) vapor while control samples without any embedded NPs showed no observable sensitivity to DNT vapor. We attribute this remarkable enhancement in sensitivity to the ability of these NPs to function as discrete nodes, participating in the charge transfer with adsorbed nitro-aromatic molecules.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fabrication of dye-sensitized solar cell (DSSC) using annato seeds (Bixa orellana Linn)

The Fabrication of dye sensitized solar cell (DSSC) using Annato seeds has been conducted in this study. Annato seeds (Bixa orellana Linn) used as a sensitizer for dye sensitized solar cell. The experimental parameter was concentration of natural dye. Annato seeds was extracted using etanol solution and the concentration was controlled by varying mass of Annato seeds. A semiconductor TiO{sub 2} was prepared by a screen printing method for coating glass use paste of TiO{sub 2}. Construction DSSC used layered systems (sandwich) consists of working electrode (TiO{sub 2} semiconductor-dye) and counter electrode (platina). Both are placed on conductive glass and electrolytes that occur electrons cycle. The characterization of thin layer of TiO{sub 2} was conducted using SEM (Scanning Electron Microscpy) analysis showed the surface morphology of TiO{sub 2} thin layer and the cross section of a thin layer of TiO{sub 2} with a thickness of 15–19 μm. Characterization of natural dye extract was determined using UV-Vis spectrometry analysis shows the wavelength range annato seeds is 328–515 nm, and the voltage (V{sub oc}) and electric current (I{sub sc}) resulted in keithley test for 30 gram, 40 gram, and 50 gram were 0,4000 V; 0,4251 V; 0,4502 V and 0,000074 A; 0,000458 A; 0,000857 A, respectively. The efficiencies of the fabricated solar cells using annato seeds as senstizer for each varying mass are 0,00799%, 0,01237%, and 0,05696%.

36 MATERIALS SCIENCE↗

Bi-harmonic cantilever design for improved measurement sensitivity in tapping-mode atomic force microscopy

This paper presents a method and cantilever design for improving the mechanical measurement sensitivity in the atomic force microscopy (AFM) tapping mode. The method uses two harmonics in the drive signal to generate a bi-harmonic tapping trajectory. Mathematical analysis demonstrates that the wide-valley bi-harmonic tapping trajectory is as much as 70% more sensitive to changes in the sample topography than the standard single-harmonic trajectory typically used. Although standard AFM cantilevers can be driven in the bi-harmonic tapping trajectory, they require large forcing at the second harmonic. A design is presented for a bi-harmonic cantilever that has a second resonant mode at twice its first resonant mode, thereby capable of generating bi-harmonic trajectories with small forcing signals. Bi-harmonic cantilevers are fabricated by milling a small cantilever on the interior of a standard cantilever probe using a focused ion beam. Bi-harmonic drive signals are derived for standard cantilevers and bi-harmonic cantilevers. Experimental results demonstrate better than 30% improvement in measurement sensitivity using the bi-harmonic cantilever. Images obtained through bi-harmonic tapping exhibit improved sharpness and surface tracking, especially at high scan speeds and low force fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗