Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Samples”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Incorporating partially identified sample segments into acreage estimation procedures: Estimates using only observations from the current year

Several methods of estimating individual crop acreages using a mixture of completely identified and partially identified (generic) segments from a single growing year are derived and discussed. A small Monte Carlo study of eight estimators is presented. The relative empirical behavior of these estimators is discussed as are the effects of segment sample size and amount of partial identification. The principle recommendations are (1) to not exclude, but rather incorporate partially identified sample segments into the estimation procedure, (2) try to avoid having a large percentage (say 80%) of only partially identified segments, in the sample, and (3) use the maximum likelihood estimator although the weighted least squares estimator and least squares ratio estimator both perform almost as well. Sets of spring small grains (North Dakota) data were used.

Sielken, R. L., Jr.↗
NASA NTRS1981

Aerodynamic mission concepts for the Mars sample return mission

Future plans for the continued exploration of Mars call for a sample return mission. This plan proposes bringing a distributed, selected sample of Mars material from several locales on Mars back to earth. The mission options studied to date utilize an extensive number of aerodynamic concepts not previously planned in past planetary exploration programs. These include various modes of orbit modification using atmospheric braking, aeromaneuvering to effect precision surface landing, very low ballistic entry for a network of surface penetrators, low flying hydrazine powered airplanes, balloons, ascent vehicles and direct entry of the samples on return to earth. This paper will discuss the concepts and their feasibility along with technology problems associated with them as surveyed from the reference material. The paper focuses primarily on the aerocapture technique as it relates to Mars orbit modification. Remaining orbit modification techniques are also discussed briefly for comparison.

Cruz, M. I.↗
NASA NTRS1982

The significance of Cl/P2O5 ratios from lunar samples

The Cl(r)/P2O5 ratios of lunar samples are reported to occur in three groups (Jovanovic and Reed, 1975; etc.). These data have been modeled as representative of three discrete volumes of differentiating magma and correlated with large convection cells and moon-wide heterogeneities. The assumptions inherent to their model are not valid. That the Cl(r)/P2O5 ratio of apatite or a rock is indicative of a magma system is unrealistic. A range of ratios can be generated during the fractionation of a magma. Apatite is not the major Cl- and P-bearing phase in most of the samples analyzed; rust, FeO(OH, Cl) and schreibersite, (FeNi)3P, occur in over 2/3 rds of the Apollo 16 rocks where they constitute 0.1-0.6 modal %, enough to account for most of the Cl(r) and P2O5 analyzed. Due to the complexities and presence of these minerals in soils and breccias, Cl(r)/P2O5 ratios have no real significance in non-igneous samples. However, basaltic rocks alone do not define any statistically significant Cl(r)P2O5 groupings.

Taylor, L. A.↗
NASA NTRS1981

Application of an ultrasonic focusing radiator for acoustic levitation of submillimeter samples

An acoustic apparatus has been specifically developed to handle samples of submillimeter size in a gaseous medium. This apparatus consists of an acoustic levitation device, deployment devices for small liquid and solid samples, heat sources for sample heat treatment, acoustic alignment devices, a cooling system and data-acquisition instrumentation. The levitation device includes a spherical aluminum dish of 12 in. diameter and 0.6 in. thickness, 130 pieces of PZT transducers attached to the back side of the dish and a spherical concave reflector situated in the vicinity of the center of curvature of the dish. The three lowest operating frequencies for the focusing-radiator levitation device are 75, 105 and 163 kHz, respectively. In comparison with other levitation apparatus, it possesses a large radiation pressure and a high lateral positional stability. This apparatus can be used most advantageously in the study of droplets and spherical shell systems, for instance, for fusion target applications.

Lee, M. C.↗
NASA NTRS1983

Determining the Point of Zero Zeta Potential in Solid Samples

Technique for measuring pzzp in solid samples incorporates sample in photochemical cell and measures temperature dependence of flatband potential. Pzzp is obtained from slope of best straight line through measured points. Tests agree well with expected values. In technique sample does not have to be in powder form.

Byvik, C. E.↗
NASA NTRS1983

Sample Holder for Cryogenic Adhesive Shear Test

Five samples tested in one cooldown. Holder mounted in testing machine. Submerged in cryogenic liquid held in cryostat. Movable crosshead of testing machine moves gradually downward. Samples placed under tension, one after another, starting with top one; each sample fails in turn before next is stressed.

Ledbetter, F. E.↗
NASA NTRS1982

Aircraft sampling of the sulfate layer near the tropopause following the eruption of Mount St. Helens

Twenty filter sampling flights of the NASA Lewis F-106 aircraft were conducted in the Great Lakes region between June 4 and August 8, 1980, following the major eruption of Mount St. Helens, Washington on May 18. The IPC-1478 filters were exposed over an altitude range spanning the local tropopause. Quarter sections were analyzed for sulfate and nitrate by ion chromatography and selected samples were analyzed for chloride by selective ion electrode. Trace elements were searched by X-ray fluorescence analysis. A filter sample taken above the tropopause on June 5 indicated a sulfate level of 50 times the baseline measurements. Subsequent measurements over a period of 2 months showed an initial dropoff and formation of a persistent layer of sulfate above the tropopause with a concentration of 10 to 18 times previously measured background-levels. Concentrations of nitrate above the tropopause exhibited considerable variability and some enhancement compared with previously measured concentration levels. It is suggested that the source of the nitrate may also be volcanic as evidenced by its temporal relationship to the sulfate concentration changes. Based on the null results of X-ray fluorescence measurements, there is no evidence of ash particle concentrations greater than 3.4 microns g/cubic m persisting in the layer above the tropopause after the second transit of the cloud.

Lezberg, E. A.↗
NASA NTRS1982

Comparative geochemistry of Apollo 16 surface soils and samples from cores 64002 and 60002 through 60007

New data are presented for the concentrations of 23 to 27 elements in nine Apollo 16 surface soil samples, two subsplits each of 12 splits of core 60002-7, and one subsplit each of 10 splits of drive tube 64002. The surface soils are generally similar to other surface soils collected at their respective stations. All ten 64002 samples are similar to each other and to the station 4 surface soils and distinctly different from soils at other stations. High iron concentrations previously reported for these same subsplits of 60002-7 result primarily from meteoritic metal. One sample from each core is contaminated by stainless steel. The recently proposed ferroan anorthositic norites are required to explain the soil compositions. A yet uncharacterized component with high concentrations of Na, Sr, and Eu is also needed.

Korotev, R. L.↗
NASA NTRS1983

Optical and X-ray observations of faint quasars in an optically selected sample

The confirmation of six quasars from spectrographic observations made in 1981 using the Multiple Mirror Telescope, and the characterization of 10 quasars from 1980 Einstein-Observatory X-ray observations (using both imaging proportional counter and high-resolution imager), are reported. The candidates had been selected by Formiggini et al. (1980) in a 1.72-sq-deg region centered on 13h 6 deg, on the basis of ultraviolet excess and a limiting B magnitude of 19.20. A total sample of 10 UV-excess quasars of this magnitude has now been confirmed, for an integral surface density of 5.8 + or - 1.8 per sq deg. Confirmation of three objects from another sample with B less than 18.25 as quasars yielded a surface density of 0./59 + or - 0.13 per sq deg at that magnitude. Data from the complete samples were used to compute the number-flux relation, found to be described by a power law with a 2.25 index for quasars with B between 17.0 and 19.2. From the X-ray observations it was determined that quasars with z less than 2.2 and B less than 19.20 contribute about 15 percent to the cosmic 2-keV background.

Marshall, H. L.↗
NASA NTRS1983

Spectral consequences of photoreceptor sampling in the rhesus retina

Optical transforms were used to compute the power spectra of rhesus cones treated as arrays of image sampling points. Spectra were obtained for the central fovea, parafovea, periphery, and far periphery. All were consistent with a novel spatial sampling principle that introduces minimal noise for spatial frequencies below the Nyquist limits implied by local receptor densities, while frequencies above the nominal Nyquist limits are not converted into conspicuous moiree patterns, but instead are scattered into broadband noise. This sampling scheme allows the visual system to escape aliasing distortion despite a large mismatch between retinal image bandwidth and the Nyquist limits implied by extrafoveal cone densities.

Yellott, J. I., Jr.↗
NASA NTRS1983

Orbital and cloud cover sampling analyses for multisatellite earth radiation budget experiments

Computer simulations have been performed to determine the geographical and temporal coverage of various satellite orbits and scanning and nonscanning radiometers for earth radiation budget measurements. These results were used to simulate the sampling of a diurnally varying cloud and radiation field for several different satellite systems to estimate errors in regional monthly mean reflected radiation. The combined results indicate that coincient observations with a minimum of one sun-synchronous satellite and a midinclined orbit satellite are needed to obtain the required regional, zonal, and global coverage with sufficient temporal sampling for obtaining accurate estimates of monthly mean reflected solar radiation. Overall, the best sampling capability and lowest errors were obtained with a three-satellite system, i.e., two sun-synchronous satellites with different equatorial crossing times combined with either a 46 or 57-deg orbit satellite. The results from these analyses have been used in defining a joint NASA-NOAA multisatellite mission for an earth radiation budget experiment.

Harrison, E. F.↗
NASA NTRS1984

Forest inventory using multistage sampling with probability proportional to size

A multistage sampling technique, with probability proportional to size, for forest volume inventory using remote sensing data is developed and evaluated. The study area is located in the Southeastern Brazil. The LANDSAT 4 digital data of the study area are used in the first stage for automatic classification of reforested areas. Four classes of pine and eucalypt with different tree volumes are classified utilizing a maximum likelihood classification algorithm. Color infrared aerial photographs are utilized in the second stage of sampling. In the third state (ground level) the time volume of each class is determined. The total time volume of each class is expanded through a statistical procedure taking into account all the three stages of sampling. This procedure results in an accurate time volume estimate with a smaller number of aerial photographs and reduced time in field work.

Parada, N. D. J.↗
NASA NTRS1984

Coherent Digital Demodulation of a Residual Carrier Signal Using IF Sampling

An analysis is presented of a digital technique for the coherent demodulation of a residual carrier signal with a biphase modulated square wave subcarrier. The processing technique employs the concept of intermediate frequencies IF sampling. An optimum Costas loop is used for subcarrier demodulation and data-aided carrier tracking, i.e., combined Costas and residual carrier tracking. It is shown that the loops perform essentially the same as the corresponding analog loops in terms of signal-to-noise ratio and loop bandwidth. The sampling does not introduce biases or other significant effects on the loops, provided that the loop bandwidth is very small compared to the symbol rate, and that the number of samples per symbol is large compared to inverse loop bandwidth.

Sfeir, R.↗
NASA NTRS1983

Forestry inventory based on multistage sampling with probability proportional to size

A multistage sampling technique, with probability proportional to size, is developed for a forest volume inventory using remote sensing data. The LANDSAT data, Panchromatic aerial photographs, and field data are collected. Based on age and homogeneity, pine and eucalyptus classes are identified. Selection of tertiary sampling units is made through aerial photographs to minimize field work. The sampling errors for eucalyptus and pine ranged from 8.34 to 21.89 percent and from 7.18 to 8.60 percent, respectively.

Lee, D. C. L.↗
NASA NTRS1984

Topics in the two-dimensional sampling and reconstruction of images

Mathematical analysis of image sampling and interpolative reconstruction is summarized and extended to two dimensions for application to data acquired from satellite sensors such as the Thematic mapper and SPOT. It is shown that sample-scene phase influences the reconstruction of sampled images, adds a considerable blur to the average system point spread function, and decreases the average system modulation transfer function. It is also determined that the parametric bicubic interpolator with alpha = -0.5 is more radiometrically accurate than the conventional bicubic interpolator with alpha = -1, and this at no additional cost. Finally, the parametric bicubic interpolator is found to be suitable for adaptive implementation by relating the alpha parameter to the local frequency content of an image.

Schowengerdt, R.↗
NASA NTRS1984

Sample size and scene identification (cloud) - Effect on albedo

Scan channels on the Nimbus 7 Earth Radiation Budget instrument sample radiances from underlying earth scenes at a number of incident and scattering angles. A sampling excess toward measurements at large satellite zenith angles is noted. Also, at large satellite zenith angles, the present scheme for scene selection causes many observations to be classified as cloud, resulting in higher flux averages. Thus the combined effect of sampling bias and scene identification errors is to overestimate the computed albedo. It is shown, using a process of successive thresholding, that observations with satellite zenith angles greater than 50-60 deg lead to incorrect cloud identification. Elimination of these observations has reduced the albedo from 32.2 to 28.8 percent. This reduction is very nearly the same and in the right direction as the discrepancy between the albedoes derived from the scanner and the wide-field-of-view channels.

Vemury, S. K.↗
NASA NTRS1984

Comet nucleus sample return

A comet nucleus sample return mission has been proposed for implementation near the end of this century. The objective of the mission is to collect a sample of undisturbed material from beneath the surface of an active comet and return it to earth in a minimally altered state. Potential targets include the short-period comets Encke, Tempel 2 and Wild 2. This article defines such a mission and describes its requirements with regard to science, sampling, thermal protection and performance. It has been determined that, with present launch capabilities, Solar Electric Propulsion (SEP) is an enabling technology for this mission.

Feingold, H.↗
NASA NTRS1986

Contactless Calorimetry for Levitated Samples

Temperature and specific heat of hot sample measured with pyrometer in proposed experimental technique. Technique intended expecially for contactless calorimetry of such materials as undercooled molten alloys, samples of which must be levitated to prevent contamination and premature crystallization. Contactless calorimetry technique enables data to be taken over entire undercooling temperature range with only one sample. Technique proves valuable in study of undercooling because difference in specific heat between undercooled-liquid and crystalline phases at same temperature provides driving force to convert metastable undercooled phase to stable crystalline phase.

Lee, M. C.↗