Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Highly piezoelectric AlN thin films grown on amorphous, insulating substrates

AlN thin films were grown by reactive sputtering on amorphous SiO{sub 2} thin films. Film texture, x-ray rocking curve width, mechanical stress, and the clamped piezoelectric constant d{sub 33,f} were studied as a function of rf bias power and substrate roughness. A high d{sub 33,f} of 5.0 pm/V was achieved at low substrate roughness and low mechanical AlN film stress. Increasing substrate roughness and stress leads to a deterioration of d{sub 33,f}, which is correlated with a higher density of opposite polarity grains detected by piezoresponse force microscopy. Extrapolating to 100% uniform polarity, a d{sub 33,f} of 6.1 pm/V is derived as highest possible value, probably corresponding to the d{sub 33,f}=e{sub 33}/c{sub 33}{sup E} of perfect single crystalline material. Growth mechanisms are proposed and underlined by high resolution transmission electron microscopy to explain the observed phenomena.

36 MATERIALS SCIENCE↗

Reflectance and substrate currents of dielectric layers under vacuum ultraviolet irradiation

The reflectance of low-k porous organosilicate glass (SiCOH) as a function of photon energy under synchrotron vacuum ultraviolet (VUV) radiation was measured using a nickel mesh reflectometer. The authors found that during VUV irradiation, the reflectance of SiCOH and the substrate current were inversely correlated. Thus, reflectance can be inferred from substrate current measurements and vice versa. The authors conclude that reflectance or substrate current measurements can determine the photon energies that are absorbed and, therefore, cause dielectric damage during processing. Thus, reducing the flux of deleterious photon energies in processing systems can minimize dielectric damage.

36 MATERIALS SCIENCE↗

Glancing angle deposition of Ge nanorod arrays on Si patterned substrates

A periodic arrangement of Ge nanorods on a Si(111) substrate was realized by glancing angle deposition (GLAD) onto honeycomb-like arranged Au hillocks formed using a self-assembled monolayer of polystyrene nanospheres as an evaporation mask. Additionally, a honeycomb-like arrangement of Au dots was used as an etch mask in a reactive ion beam etching process for pattern transfer procedure. Resulting honeycomb patterns consisting of Si hillocks within the Si(111) substrates were utilized to deposit Ge nanorods. Effective morphological variations in shape and dimension of GLAD-grown nanorods on honeycomb-like patterned substrates with both Au dot and Si dot arrays are strongly influenced by interseed distances, seed heights, and consequently shadowing lengths. For a large pattern period, it was observed that the usual triangular shape of the nanorod changed to a hexagonal shape as an effect of additional particle flux that reached the growing nanorod from the direction of second and third-nearest neighbors due to inadequate shadowing lengths and increased interseed condensation.

36 MATERIALS SCIENCE↗

Effect of target-substrate distance on properties of flexible InZnSnO films grown by linear facing target sputtering

The authors have investigated the effect of target-to-substrate distance (TSD) on the electrical, optical, and structural properties of flexible InZnSnO (IZTO) films grown on polyethylene terephthalate substrates using linear facing target sputtering (LFTS) at room temperature. The electrical and optical properties of IZTO film grown by LFTS were significantly influenced by TSD while the structural and surface properties of IZTO film were not affected by TSD, unlike conventional magnetron sputtering. Regardless of TSD, all IZTO film showed completely amorphous structure with very low root mean square roughness of 0.33 nm, due to the low kinetic energy of sputtered IZTO atoms and a substrate position that did not directly face the targets. Based on the figure of merit value, the optimized TSD for deposition of flexible IZTO films is 2.5 cm. At optimized conditions, the IZTO film showed a sheet resistance of 23.1 {Omega}/sq and an optical transmittance of 80%.

36 MATERIALS SCIENCE↗

Evolution of morphology and structure of Pb thin films grown by pulsed laser deposition at different substrate temperatures

Pb thin films were prepared by pulsed laser deposition on a Si (100) substrate at different growth temperatures to investigate their morphology and structure. The morphological analysis of the thin metal films showed the formation of spherical submicrometer grains whose average size decreased with temperature. X-ray diffraction measurements confirmed that growth temperature influences the Pb polycrystalline film structure. A preferred orientation of Pb (111) normal to the substrate was achieved at 30 °C and became increasingly pronounced along the Pb (200) plane as the substrate temperature increased. These thin films could be used to synthesize innovative materials, such as metallic photocathodes, with improved photoemission performances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of surface morphology of Si substrate on performance of Si/ZnO heterojunction devices grown by atomic layer deposition technique

In this paper, the authors have investigated the structural, optical, and electrical characteristics of silicon nanowire (SiNW)/zinc oxide (ZnO) core–shell nanostructure heterojunctions and compared their characteristics with Si/ZnO planar heterojunctions to investigate the effect of surface morphology of Si substrate in the characteristics of Si/ZnO heterojunction devices. In this work, ZnO thin film was conformally deposited on both p-type 〈100〉 planar Si substrate and substrate with vertically aligned SiNW arrays by atomic layer deposition (ALD) method. The x-ray diffraction spectra show that the crystalline structures of Si/ZnO heterojunctions are having (101) preferred orientation, whereas vertically oriented SiNW/ZnO core–shell heterojunctions are having (002)-oriented wurtzite crystalline structures. The photoluminescence (PL) spectra of Si/ZnO heterojunctions show a very sharp single peak at 377 nm, corresponding to the bandgap of ZnO material with no other defect peaks in visible region; hence, these devices can have applications only in UV region. On the other hand, SiNW/ZnO heterojunctions are having band-edge peak at 378 nm along with a broad emission band, spreading almost throughout the entire visible region with a peak around 550 nm. Therefore, ALD-grown SiNW/ZnO heterojunctions can emit green and red light simultaneously. Reflectivity measurement of the heterojunctions further confirms the enhancement of visible region peak in the PL spectra of SiNW/ZnO heterojunctions, as the surface of the SiNW/ZnO heterojunctions exhibits extremely low reflectance (<3%) in the visible wavelength region compared to Si/ZnO heterojunctions (>20%). The current–voltage characteristics of both Si/ZnO and SiNW/ZnO heterojunctions are measured with large area ohmic contacts on top and bottom of the structure to compare the electrical characteristics of the devices. Due to large surface to-volume ratio of SiNW/ZnO core–shell heterojunction devices, the output current rating is about 130 times larger compared to their planar version at 2 V forward bias voltage. This higher output current rating can be exploited for fabricating high-performance nanoelectronic and optoelectronic devices in near future.

42 ENGINEERING↗

Highly (001) oriented L1{sub 0}-CoPt/TiN multilayer films on glass substrates with perpendicular magnetic anisotropy

To obtain strong perpendicular magnetic anisotropy (PMA) based on L1{sub 0} structure for magnetic storage devices, costly single crystalline substrates are generally required to achieve (001) texture. Recently, various studies also have focused on depositing different kinds of seed layers on glass or other amorphous substrates to promote (001) preferred orientation of L1{sub 0} CoPt and FePt. TiN is a very promising seed layer material because of its cubic crystalline structure (similar to MgO) and excellent diffusion barring property even at high temperatures. In the present work, highly (001) oriented L1{sub 0}-CoPt/TiN multilayer films have been successfully deposited on glass substrates. After annealing at 700 °C, the film exhibits PMA, and a strong (001) peak is detected from the x-ray diffraction profiles, indicating the ordering transformation of CoPt layers from fcc (A1) to L1{sub 0} structure. It also is found that alternate deposition of cubic TiN and CoPt effectively improves the crystallinity and (001) preferred orientation of CoPt layers. This effect is verified by the substantial enhancement of (001) reflection and PMA with increasing the period number of the multilayer films.

36 MATERIALS SCIENCE↗

Growth optimization and characterization of GaN epilayers on multifaceted (111) surfaces etched on Si(100) substrates

The four nearest Si(111) multifaceted sidewalls were exposed inside an array of 3 μm-wide square holes patterned on an Si(100) substrate, and this patterned Si(100) substrate was used as a substrate for the deposition of a gallium nitride (GaN) epilayer. Subsequently the effect that the growth pressure, the etched-hole profiles, and the etched-hole arrangement had upon the quality of the as-grown GaN was investigated. The coalescence of the as-grown GaN epilayer on the exposed Si(111) facets was observed to be enhanced with reduced growth pressure from 120 to 90 Torr. A larger Si(001) plane area at the bottom of the etched holes resulted in bidirectional GaN domains, which resulted in poor material quality. The bidirectional GaN domains were observed as two sets of six peaks via a high-resolution x-ray diffraction phi scan of the GaN(10-11) reflection. It was also shown that a triangular array of etched holes was more desirable than square arrays of etched holes for the growth high-quality and continuous GaN films.

42 ENGINEERING↗

Molecular Mechanisms of Viral and Host Cell Substrate Recognition by Hepatitis C Virus NS3/4A Protease

Hepatitis C NS3/4A protease is a prime therapeutic target that is responsible for cleaving the viral polyprotein at junctions 3-4A, 4A4B, 4B5A, and 5A5B and two host cell adaptor proteins of the innate immune response, TRIF and MAVS. In this study, NS3/4A crystal structures of both host cell cleavage sites were determined and compared to the crystal structures of viral substrates. Two distinct protease conformations were observed and correlated with substrate specificity: (i) 3-4A, 4A4B, 5A5B, and MAVS, which are processed more efficiently by the protease, form extensive electrostatic networks when in complex with the protease, and (ii) TRIF and 4B5A, which contain polyproline motifs in their full-length sequences, do not form electrostatic networks in their crystal complexes. These findings provide mechanistic insights into NS3/4A substrate recognition, which may assist in a more rational approach to inhibitor design in the face of the rapid acquisition of resistance.

59 BASIC BIOLOGICAL SCIENCES↗

Low-Temperature epitaxial growth of InGaAs films on InP(100) and InP(411)A substrates

The structural and electrical characteristics of In{sub 0.53}Ga{sub 0.47}As epitaxial films, grown in the low-temperature mode on InP substrates with (100) and (411)A crystallographic orientations at flow ratios of As4 molecules and In and Ga atoms of γ = 29 and 90, have been comprehensively studied. The use of InP(411)A substrates is shown to increase the probability of forming two-dimensional defects (twins, stacking faults, dislocations, and grain boundaries), thus reducing the mobility of free electrons, and As{sub Ga} point defects, which act as donors and increase the free-electron concentration. An increase in γ from 29 to 90 leads to transformation of single-crystal InGaAs films grown on (100) and (411)A substrates into polycrystalline ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raising the quantum efficiency of AlGaInN flip-chip LEDs by Reactive ion etching of the outer side of SiC substrates

A method for creating a light-scattering microprofile on the outer side of SiC substrates in order to diminish the light extraction loss caused by the effect of total internal reflection in light-emitting AlGaIn/GaN structures has been further developed. It is suggested to use thin photoresist layers as random masks for reactive ion etching of silicon carbide substrates. A microprofile with the required parameters has been obtained on the substrate surface by optimizing the etching modes, with the result that the external quantum efficiency of light-emitting crystals increased by more than 25%.

36 MATERIALS SCIENCE↗

Chemical passivation of InSb (100) substrates in aqueous solutions of sodium sulfide

The elemental composition and electronic structure of both native-oxide-covered InSb (100) substrates and substrates treated in aqueous solutions of sodium sulfide are analyzed by X-ray photoelectron spectroscopy. It is found that, as a result of treatment in a 1 M aqueous solution of Na{sub 2}S and subsequent annealing in vacuum at 150 Degree-Sign C, the surface layer consisting of complex antimony and indium oxides of nonstoichiometric composition is removed completely with the formation of a continuous layer of chemisorbed sulfur atoms coherently bound to indium atoms. According to atomic-force microscopy data, no etching of the host substrate material occurs during sulfide passivation. A shift (by 0.37 eV) of the In-Sb bulk photoemission towards higher binding energies is found, which indicates that the surface Fermi level shifts deeper into the conduction band.

36 MATERIALS SCIENCE↗

Plastic relaxation in GeSi layers on Si (001) and Si (115) substrates

It is demonstrated using X-ray diffraction and atomic force microscopy that elastic stresses in GeSi layers on Si (115) substrates relax more effectively than in the same layers on Si (001) substrates. This fact is attributed to the predominant contribution of one of the (111) slip planes on the (115) cut. The atomicforce-microscopy image of the GeSi/Si(115) surface reveals unidirectional slip planes, while the GeSi/Si(001) image contains a grid of orthogonal lines and defects at the points of their intersection. As a result, thick GeSi layers on Si (115) have a reduced surface roughness. A technique for calculating the parameters of relaxation of the layer on the Si (115) substrate using X-ray diffraction data is discussed.

36 MATERIALS SCIENCE↗

Structural and photoluminescence properties of low-temperature GaAs grown on GaAs(100) and GaAs(111)A substrates

Undoped, uniformly Si-doped, and δ-Si-doped GaAs layers grown by molecular-beam epitaxy on (100)- and (111)A-oriented GaAs substrates at a temperature of 230°C are studied. The As{sub 4} pressure is varied. The surface roughness of the sample is established by atomic-force microscopy; the crystal quality, by X-ray diffraction measurements; and the energy levels of different defects, by photoluminescence spectroscopy at a temperature of 79 K. It is shown that the crystal structure is more imperfect in the case of GaAs(111)A substrates. The effect of the As{sub 4} flux during growth on the structure of low-temperature GaAs grown on different types of substrates is shown as well.

36 MATERIALS SCIENCE↗

On the stimulated emission of InGaAs/GaAs/AlGaAs laser structures grown by MOCVD on exact and inclined Ge/Si(001) substrates

GaAs/AlGaAs laser structures with InGaAs quantum wells are grown by metal-organic chemical vapor deposition (MOCVD) on exact Si(001) substrates and substrates inclined by 4° to the [011] axis with a relaxed Ge buffer layer, emitting in the transparency region of bulk silicon (the wavelength is longer than 1100 nm at room temperature). The threshold power densities of stimulated emission, observed for the structures grown on exact and inclined substrates are 45 and 37 kW/cm{sup 2}, respectively.

36 MATERIALS SCIENCE↗

MBE growth of ultrathin III–V nanowires on a highly mismatched SiC/Si(111) substrate

The possibility in principle of growing III–V GaAs, AlGaAs, and InAs nanowires (NWs) on a silicon substrate with a nanometer buffer layer of silicon carbide is demonstrated for the first time. The diameter of these NWs is smaller than that of similar NWs grown on a silicon substrate. In particular, the minimum diameter is less than 10 nm for InAs NWs. In addition, it was assumed on the basis of photoluminescence measurements that, when AlGaAs NWs are grown on these substrates, a complex structure is formed due to the self-organized formation of AlGaAs quantum dots with a lower content of aluminum, embedded in the NWs.

36 MATERIALS SCIENCE↗

Study of the Structural and Morphological Properties of HPHT Diamond Substrates

The morphological and structural properties of a series of high-pressure high-temperature (HPHT) single-crystal diamond substrates are comprehensively studied by white-light optical interference microscopy, atomic-force microscopy, and X-ray diffraction analysis. Procedures that provide a means for characterizing the substrate parameters most critical for epitaxial application with the laboratory equipment are described. It is shown that the jewelry-type characterization of diamond substrates is insufficient to assess the possibility of their use for the epitaxial growth of chemical-vapor-deposited (CVD) diamond.

36 MATERIALS SCIENCE↗

Features of the Initial Stage of GaN Growth on Si(111) Substrates by Nitrogen-Plasma-Assisted Molecular-Beam Epitaxy

The results of investigations of the effect of the initial conditions (nitridation of the Si(111) substrate, the GaN growth temperature, and the stoichiometry of GaN growth) on the growth kinetics and the GaN/Si(111)-layer polarity under nitrogen-plasma-assisted molecular-beam epitaxy are presented. It is experimentally established that the optimal initial condition for GaN epitaxy on Si(111) substrates is high-temperature nitridation of the Si(111) substrate carried out immediately before GaN growth. It is shown that it is possible to control the polarity of GaN by means of appropriate choice of the growth under conditions with N or Ga enrichment at the initial stage of GaN/Si(111) epitaxy.

36 MATERIALS SCIENCE↗