Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SIZE DETERMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Solid organic-coated ammonium sulfate particles at high relative humidity in the summertime Arctic atmosphere

The ability of atmospheric aerosols to impact climate through water uptake and cloud formation is fundamentally determined by the size, composition, and phase (liquid, semisolid, or solid) of individual particles. Particle phase is dependent on atmospheric conditions (relative humidity and temperature) and chemical composition and, importantly, solid particles can inhibit the uptake of water and other trace gases, even under humid conditions. Particles composed primarily of ammonium sulfate are presumed to be liquid at the relative humidities (67 to 98%) and temperatures (–2 to 4 °C) of the summertime Arctic. Under these atmospheric conditions, we report the observation of solid organic-coated ammonium sulfate particles representing 30% of particles, by number, in a key size range (<0.2 µm) for cloud activation within marine air masses from the Arctic Ocean at Utqiagvik, AK. The composition and size of the observed particles are consistent with recent Arctic modeling and observational results showing new particle formation and growth from dimethylsulfide oxidation to form sulfuric acid, reaction with ammonia, and condensation of marine biogenic sulfate and highly oxygenated organic molecules. Aqueous sulfate particles typically undergo efflorescence and solidify at relative humidities of less than 34%. Therefore, the observed solid phase is hypothesized to occur from contact efflorescence during collision of a newly formed Aitken mode sulfate particle with an organic-coated ammonium sulfate particle. With declining sea ice in the warming Arctic, this particle source is expected to increase with increasing open water and marine biogenic emissions.

54 ENVIRONMENTAL SCIENCES↗

THE ULTRAVIOLET SPECTRUM AND PHYSICAL PROPERTIES OF THE MASS DONOR STAR IN HD 226868 = Cygnus X-1

We present an examination of high-resolution, ultraviolet (UV) spectroscopy from Hubble Space Telescope of the photospheric spectrum of the O-supergiant in the massive X-ray binary HD 226868 = Cyg X-1. We analyzed this and ground-based optical spectra to determine the effective temperature and gravity of the O9.7 Iab supergiant. Using non-LTE, line-blanketed, plane-parallel models from the TLUSTY grid, we obtain T{sub eff} = 28.0 {+-} 2.5 kK and log g {approx}> 3.00 {+-} 0.25, both lower than in previous studies. The optical spectrum is best fit with models that have enriched He and N abundances. We fit the model spectral energy distribution for this temperature and gravity to the UV, optical, and infrared (IR) fluxes to determine the angular size and extinction toward the binary. The angular size then yields relations for the stellar radius and luminosity as a function of distance. By assuming that the supergiant rotates synchronously with the orbit, we can use the radius-distance relation to find mass estimates for both the supergiant and black hole (BH) as a function of the distance and the ratio of stellar to Roche radius. Fits of the orbital light curve yield an additional constraint that limits the solutions in the mass plane. Our results indicate masses of 23{sup +8}{sub -6} M{sub sun} for the supergiant and 11{sup +5}{sub -3} M{sub sun} for the BH.

79 ASTRONOMY AND ASTROPHYSICS↗

ON RADIATION PRESSURE IN STATIC, DUSTY H II REGIONS

Radiation pressure acting on gas and dust causes H II regions to have central densities that are lower than the density near the ionized boundary. H II regions in static equilibrium comprise a family of similarity solutions with three parameters: {beta}, {gamma}, and the product Q{sub 0} n{sub rms}; {beta} characterizes the stellar spectrum, {gamma} characterizes the dust/gas ratio, Q{sub 0} is the stellar ionizing output (photons/s), and n{sub rms} is the rms density within the ionized region. Adopting standard values for {beta} and {gamma}, varying Q{sub 0} n{sub rms} generates a one-parameter family of density profiles, ranging from nearly uniform density (small Q{sub 0} n{sub rms}) to shell-like (large Q{sub 0} n{sub rms}). When Q{sub 0} n{sub rms} {approx}> 10{sup 52} cm{sup -3} s{sup -1}, dusty H II regions have conspicuous central cavities, even if no stellar wind is present. For given {beta}, {gamma}, and Q{sub 0} n{sub rms}, a fourth quantity, which can be Q{sub 0}, determines the overall size and density of the H II region. Examples of density and emissivity profiles are given. We show how quantities of interest-such as the peak-to-central emission measure ratio, the rms-to-mean density ratio, the edge-to-rms density ratio, and the fraction of the ionizing photons absorbed by the gas-depend on {beta}, {gamma}, and Q{sub 0} n{sub rms}. For dusty H II regions, compression of the gas and dust into an ionized shell results in a substantial increase in the fraction of the stellar photons that actually ionize H (relative to a uniform-density H II region with the same dust/gas ratio and density n = n{sub rms}). We discuss the extent to which radial drift of dust grains in H II regions can alter the dust-to-gas ratio. The applicability of these solutions to real H II regions is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

CYGNUS X-3's LITTLE FRIEND

Using the unique X-ray imaging capabilities of the Chandra X-ray observatory, a 2006 observation of Cygnus X-3 has provided insight into a singular feature associated with this well-known microquasar. This extended emission, located {approx}16'' from Cygnus X-3, varies in flux and orbital phase (shifted by 0.56 in phase) with Cygnus X-3, acting like a celestial X-ray 'mirror'. The feature's spectrum, flux, and time variations allow us to determine the location, size, density, and mass of the scatterer. We find that the scatterer is a Bok Globule located along our line of sight, and we discuss its relationship to Cygnus X-3. This is the first time such a feature has been identified with Chandra.

79 ASTRONOMY AND ASTROPHYSICS↗

MODELING THE NUCLEAR INFRARED SPECTRAL ENERGY DISTRIBUTION OF TYPE II ACTIVE GALACTIC NUCLEI

We present results from model fitting to the spectral energy distribution (SED) of a homogeneous sample of Seyfert II galaxies drawn from the 12 {mu}m Galaxy Sample. Imaging and nuclear flux measurements are presented in an accompanying paper. Here we add Spitzer/IRS observations to further constrain the SEDs after careful subtraction of a starburst component. We use the library of CLUMPY torus models from Nenkova et al. and also test the two-phase models recently produced by Stalevski et al. We find that photometric and spectroscopic observations in the mid-IR ({lambda} {approx}> 5 {mu}m) are crucial to properly constrain the best-fit torus models. About half of our sources show clear near-IR excess of their SEDs above the best-fit models. This problem can be less severe when using the Stalevski et al. models. The nature of this emission is not clear since best-fitted blackbody temperatures are very high ({approx}1700-2500 K) and the Type II classification of our sources would correspond to a small probability to peer directly into the hottest regions of the torus. Crucially, the derived torus parameters are quite robust when using CLUMPY models, independently of whether or not the sources require an additional blackbody component. Our findings suggest that tori are characterized by N{sub 0}{approx}>5, {sigma} {approx}> 40, {tau} {approx}< 25, Angle i {approx}> 40 Degree-Sign , Y {approx}< 50, and A {sup los} {sub v} {approx} 100-300, where N{sub 0} is the number of clouds in the equatorial plane of the torus, {sigma} is the characteristic opening angle of the cloud distribution, {tau} is the opacity of a single cloud, Angle i is the line-of-sight orientation of the torus, Y is the ratio of the inner to the outer radii, and A {sup los} {sub v} is the total opacity along the line of sight. From these, we can determine typical torus sizes and masses of 0.1-5.0 pc and 10{sup 4}-10{sup 6} M {sub Sun }, respectively. We find tentative evidence that those nuclei with detected hidden broad-line regions are characterized by lower levels of extinction than those without one. Finally, we find no correlation between the torus properties and the presence of circumnuclear or more global star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Quasar cartography: From black hole to broad-line region scales

A generalized approach to reverberation mapping (RM) is presented, which is applicable to broad- and narrowband photometric data, as well as to spectroscopic observations. It is based on multivariate correlation analysis techniques and, in its present implementation, is able to identify reverberating signals across the accretion disk and the broad-line region (BLR) of active galactic nuclei (AGNs). Statistical tests are defined to assess the significance of time-delay measurements using this approach, and the limitations of the adopted formalism are discussed. It is shown how additional constraints on some of the parameters of the problem may be incorporated into the analysis thereby leading to improved results. When applied to a sample of 14 Seyfert 1 galaxies having good-quality high-cadence photometric data, accretion disk scales and BLR sizes are simultaneously determined, on a case-by-case basis, in most objects. The BLR scales deduced here are in good agreement with the findings of independent spectroscopic RM campaigns. Implications for the photometric RM of AGN interiors in the era of large surveys are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Spitzer space telescope measurements of dust reverberation lags in the Seyfert 1 galaxy NGC 6418

We present results from a 15 month campaign of high-cadence (∼3 days) mid-infrared Spitzer and optical (B and V) monitoring of the Seyfert 1 galaxy NGC 6418, with the objective of determining the characteristic size of the dusty torus in this active galactic nucleus (AGN). We find that the 3.6 and 4.5 μm flux variations lag behind those of the optical continuum by 37.2{sub −2.2}{sup +2.4} days and 47.1{sub −3.1}{sup +3.1} days, respectively. We report a cross-correlation time lag between the 4.5 and 3.6 μm flux of 13.9{sub −0.1}{sup +0.5} days. The lags indicate that the dust emitting at 3.6 and 4.5 μm is located at a distance ≈1 light-month (≈0.03 pc) from the source of the AGN UV–optical continuum. The reverberation radii are consistent with the inferred lower limit to the sublimation radius for pure graphite grains at 1800 K, but smaller by a factor of ∼2 than the corresponding lower limit for silicate grains; this is similar to what has been found for near-infrared (K-band) lags in other AGNs. The 3.6 and 4.5 μm reverberation radii fall above the K-band τ∝L{sup 0.5} size–luminosity relationship by factors ≲2.7 and ≲3.4, respectively, while the 4.5 μm reverberation radius is only 27% larger than the 3.6 μm radius. This is broadly consistent with clumpy torus models, in which individual optically thick clouds emit strongly over a broad wavelength range.

79 ASTRONOMY AND ASTROPHYSICS↗

AN observational detection of the bridge effect of void filaments

The bridge effect of void filaments is a phrase coined by Park and Lee to explain the correlations found in a numerical experiment between the luminosity of the void galaxies and the degree of straightness of their host filaments. Their numerical finding implies that a straight void filament provides a narrow channel for the efficient transportation of gas and matter particles from the surroundings into void galaxies. Analyzing the Sloan void catalog constructed by Pan et al., we identify the filamentary structures in void regions and determine the specific size of each void filament as a measure of its straightness. To avoid possible spurious signals caused by Malmquist bias, we consider only those void filaments whose redshifts are in the range 0⩽z⩽0.02 and find a clear tendency that the void galaxies located in the straighter filaments are on average more luminous, which is in qualitative agreement with the numerical prediction. It is also shown that the strength of correlation increases with the number of member galaxies in the void filaments, which can be understood physically on the grounds that the more stretched filaments can connect the dense surroundings even to galaxies located deep in the central parts of the voids. This observational evidence may provide a key clue to the puzzling issue of why the void galaxies have higher specific star formation rates and bluer colors than their wall counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗

The role of intermediate ΔΔ states in nucleon–nucleon scattering in the large-Nc and unitary limits, and ΔΔ and ΩΩ scattering

We explore potential explanations for why using large-Nc (Nc is the number of colors) scaling to determine the relative size of few-nucleon low-energy operators agrees with experiment even when dynamical Δ’s are not explicitly included. Given that the large-Nc analysis is predicated on the nucleons and Δ’s being degenerate, this is a curious result. We show that for purely S-wave interactions the relationships dictated by large-Nc scaling are unaffected whether the Δ is included or not. In the case of higher partial waves that do not mix with S-waves, the impact of the Δ is perturbative, which makes the agreement with naive (Δ-less) large-Nc ordering unsurprising. For higher partial waves that mix with S-waves, the nucleon and Δ would need to decouple to get agreement with naive large-Nc ordering. We find all NN, ΔN, and ΔΔ low energy coefficients for leading-order baryon–baryon scattering in Δ-full pionless effective field theory in terms of the two independent parameters dictated by the SU(2F) spin-flavor symmetry that arises in the Nc → ∞ limit. Because of recent lattice quantum chromodynamics results and experimental interest, we extend our analysis to the three-flavor case to study ΩΩ scattering. We show that in the unitary limit (where scattering lengths become infinite) one of the two SU(2F) parameters is driven to zero, resulting in enhanced symmetries, which agree with those found in spin-1/2 entanglement studies.

Richardson, Thomas R↗

Where the world stands still: turnaround as a strong test of ΛCDM cosmology

Our intuitive understanding of cosmic structure formation works best in scales small enough so that isolated, bound, relaxed gravitating systems are no longer adjusting their radius; and large enough so that space and matter follow the average expansion of the Universe. Yet one of the most robust predictions of ΛCDM cosmology concerns the scale that separates these limits: the turnaround radius, which is the non-expanding shell furthest away from the center of a bound structure. We show that the maximum possible value of the turnaround radius within the framework of the ΛCDM model is, for a given mass M, equal to (3GM/Λ c{sup 2}){sup 1/3}, with G Newton's constant and c the speed of light, independently of cosmic epoch, exact nature of dark matter, or baryonic effects. We discuss the possible use of this prediction as an observational test for ΛCDM cosmology. Current data appear to favor ΛCDM over alternatives with local inhomogeneities and no Λ. However there exist several local-universe structures that have, within errors, reached their limiting size. With improved determinations of their turnaround radii and the enclosed mass, these objects may challenge the limit and ΛCDM cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluating opportunity for distributed wind energy in rural and agricultural areas

Wind energy is among the most mature renewable energy technologies, accounting for 11% of the current US electricity generation in 2024, with the lowest average levelized cost. While it is known that substantial opportunity exists for further development, a key question has been where wind energy is best suited compared to other technologies. This study leverages an immense dataset of parcel-resolved technoeconomic potential for the contiguous United States, focusing on distributed wind (DW) energy—a configuration where one or more turbines, typically 30–60 m in height are used to satisfy nearby energy needs. The analysis is conducted at multiple spatial scales and considers land use, crop land, census, and incentive program data to determine the most opportune areas for market development. The results show that rural, agricultural and residential areas are most suited to DW. Connection type (in front of, or behind the meter) and regulations determine the best application, while siting constraints, economics, demand and the wind resource determines the optimal size of turbine.

17 WIND ENERGY↗

Excitation of two spatially separated Bose-Einstein condensates of magnons

We have studied experimentally the spatial properties and the dynamics of magnon Bose-Einstein condensates created in ferromagnetic films by a parametric pumping with different spatial configurations. Using the specific character of dynamic fields produced by pumping resonators of different shapes, we were able to realize the regime, in which two spatially separated condensates of magnons are formed. Our experiments show that while the separation between the condensates is determined by the size of the resonator, their spatial width can be changed by varying the power of the pumping signal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extraction of Plutonium-Containing Microcrystals from Hanford Soil using a Focused Ion Beam for Single-Crystal X-ray Diffraction Analysis

Herein we report the successful use of a focused ion beam/scanning electron microscope (FIB/SEM) to prepare microsamples of radioactive single-crystals for X-ray diffraction analysis. This technique was used to extract and analyze crystalline Pu-containing particles as small as 28 µm3 from Hanford soil taken from the 216-Z-9 waste crib which were then crystallographically characterized using single-crystal X-ray diffraction (SCXRD) to confirm the cubic structure of PuO2. As a systematic proof of concept, the technique was first tested using UO2 crystals milled into cubic shapes with approximate volumes 4620, 1331, 125, 8 and 1 µm3, respectively, in order to empirically determine the crystal size limits for characterization by a laboratory-based diffractometer with a sealed tube Mo or Ag anode X-ray source and a charge-coupled device (CCD) detector.

microcrystals, Plutomium, focused ion beam/scannin↗

Synthesis, structural characterization, and electronic structure of the novel Zintl phase Ba 2 ZnP 2

The novel Zintl phase dibarium zinc diphosphide (Ba 2 ZnP 2 ) was synthesized for the first time. This was accom­plished using the Pb flux technique, which allowed for the growth of crystals of adequate size for structural determination via single-crystal X-ray diffraction methods. The Ba 2 ZnP 2 com­pound was determined to crystallize in a body-centered ortho­rhom­bic space group, Ibam (No. 72). Formally, this crystallographic arrangement belongs to the K 2 SiP 2 structure type. Therefore, the structure can be best described as infinite [ZnP 2 ] 4– polyanionic chains with divalent Ba 2+ cations located between the chains. All valence electrons are partitioned, which conforms to the Zintl–Klemm concept and suggests that Ba 2 ZnP 2 is a valence-precise com­position. In conclusion, the electronic band structure of this new com­pound, com­puted with the aid of the TB–LMTO–ASA code, shows that Ba 2 ZnP 2 is an intrinsic semiconductor with a band gap of ca 0.6 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of bulk alumina structures with humidity sensing capabilities using direct ink write technique

Purpose The purpose of this study is to evaluate different 3D structures for humidity sensing that will enable the fabrication of complex geometries with high moisture sensitivity. Design/methodology/approach Humidity sensors based on alumina ceramics were fabricated using direct ink write (DIW) technique. Different engineered surface area, polymer binder ratio and post-processing treatment were considered to increase moisture sensitivity. Findings It was found that the binder ratio plays an important role in controlling the rheology of the paste during printing and determining the pore size after post-processing treatment. The sensibility of the fabricated humidity sensor was investigated by measuring its capacitance response toward relative humidity (RH) varying from 40% to 90% RH at 25°C. It is shown that using 3D lattice design, printed alumina humidity sensor could improve sensitivity up to 31.6 pF/RH%, over an order of magnitude higher than solid alumina. Originality/value Most of the alumina humidity sensors available are films in nature because of manufacturing difficulties, which limited its potential of higher sensitivity, and thus broader applications. In this paper, a novel 3D alumina humidity sensor was fabricated using DIW 3D printing technology.

Engineering↗

A prototype quantitative film scanner for radiochromic film dosimetry

We have developed a high resolution, quantitative, two-dimensional optical film scanner for use with a commercial high sensitivity radiochromic film (RCF) for measuring single fraction external-beam radiotherapy dose distributions. The film scanner was designed to eliminate artifacts commonly observed in RCF dosimetry. The scanner employed a stationary light source and detector with a moving antireflective glass film platen attached to a high precision computerized X-Y translation stage. An ultrabright red light emitting diode (LED) with a peak output at 633 nm and full width at half maximum (FWHM) of 16 nm was selected as the scanner light source to match the RCF absorption peak. A dual detector system was created using two silicon photodiode detectors to simultaneously measure incident and transmitted light. The LED light output was focused to a submillimeter (FWHM 0.67 mm) spot size, which was determined from a scanning knife-edge technique for measuring Gaussian optical beams. Data acquisition was performed with a 16-bit A/D card in conjunction with commercial software. The linearity of the measured densities on the scanner was tested using a calibrated neutral-density step filter. Sensitometric curves and three IMRT field scans were acquired with a spatial resolution of 1 mm for both radiographic film and RCF. The results were compared with measurements taken with a commercial diode array under identical delivery conditions. The RCF was rotated by 90 deg. and rescanned to study orientation effects. Comparison between the RCF and the diode array measurements using percent dose difference and distance-to-agreement criteria produced average passing rates of 99.0% using 3%/3 mm criteria and 96.7% using 2%/2 mm criteria. The same comparison between the radiographic film and diode array measurements resulted in average passing rates 96.6% and 91.6% for the above two criteria, respectively. No measurable light-scatter or interference scanner artifacts were observed. The RCF rotated by 90 deg. showed no measurable orientation effect. A scan of a 15x15 cm{sup 2} area with 1 mm resolution required 22 min to acquire. The LED densitometer provides an accurate film dosimetry system with 1 mm or better resolution. The scanner eliminates the orientation dependence of RCF dosimetry that was previously reported with commercial flatbed scanners.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗