Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Probability Distribution Function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Iron oxidation state of FeTiO[subscript 3] under high pressure

The oxidation state of iron in FeTiO{sub 3} under high pressure was investigated by combining x-ray diffraction, Moessbauer spectroscopy, x-ray-absorption spectroscopy, and density-functional theory based calculations. Our results demonstrate that the ilmenite-to-perovskite phase transition occurs above 20 GPa at room temperature and on compression two phases coexist to 40 GPa. The Fe{sup 3+}/{Sigma}Fe ratio increases up to 16 GPa, probably attributed to the d-electron drifting of cations via the oxygen bridge in the adjacent octahedral, then decreases at higher pressure due to the ilmenite-to-perovskite phase transition accompanied by a slight decrease in iron valence state. Our ab initio calculations further show that the most significant changes in the charge distribution in FeTiO{sub 3} are associated with Ti and O.

36 MATERIALS SCIENCE↗

Composite Power System Reliability with Renewables and Customer Flexibility

Composite Power System Reliability is defined as the computational procedure that quantifies the probability that the power system will perform the function of delivering electric power to customers adequately, on a continuous basis and with an acceptable quality. This definition leaves many details undefined and exemplifies the ambiguity in reliability analysis. The increasing deployment of wind and PV creates additional uncertainties that make reliability analysis a rather complex issue. Because of increased uncertainty the need for composite reliability analysis and utilization of results in power system planning is critical. New approaches are emerging for dealing with these problems from the operational point of view, including demand response programs, tapping on customer and distributed resource flexibility and new control approaches. The key question to be addressed is: how the new operational paradigms affect composite power system reliability. Here, this paper presents the ongoing work of the IEEE Composite System Reliability Task Force of the IEEE PES Reliability, Risk, Probability Application (RRPA) Subcommittee.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A state estimation approach based on stochastic expansions

This paper presents a new approach for state estimation problems. It is based on the representation of random variables using stochastic functions. Its main idea is to expand the state variables in terms of the noise variables of the system, and then estimate the unnoisy value of the state variables by taking the mean value of the stochastic expansion. Moreover, it was shown that in some situations, the proposed approach may be adapted to the determination of the probability distribution of the state noise. For the determination of the coefficients of the expansions, we present three approaches: moment matching (MM), collocation (COL) and variational (VAR). In the numerical analysis section, three examples are analyzed including a discrete linear system, the Influenza in a boarding school and the state estimation problem in the Hodgkin–Huxley’s model. In all these examples, the proposed approach was able to estimate the values of the state variables with precision, i.e., with very low RMS values.

97 MATHEMATICS AND COMPUTING↗

Inhomogeneous linewidth broadening and radiative lifetime dispersion of size dependent direct bandgap radiation in Si quantum dot

The SiO{sub x} (SiO{sub x}:Si-QDs) with buried Si quantum dots (Si-QDs) is synthesized by plasma-enhanced chemical vapor deposition (PECVD), and the size-dependent wave-function of Si-QDs embedded in Si-rich SiO{sub 2} matrix is experimentally and theoretically analyzed to reformulate its bandgap energy as E{sub g}(d) = 1.12+5.83/d{sup 1.78}. The photoluminescent lifetime of Si-QDs is dominated by the non-phonon assisted radiative recombination. Shrinking the Si-QD size from 4.3 to 1.9 nm increases the overlapping probability of electron-hole wave-functions in Si-QD to shorten the non-phonon assisted radiative lifetime from 6.3 {mu}s to 83 ns. Fitting the time-resolved photoluminescence trace with a stretched exponential decay function reveals a lifetime dispersion factor. The lifetime dispersion greatly reduced from 0.8 to 0.39 by enlarging the size distribution of Si-QDs from 0.2 to 1.1 nm, which elucidates the inhomogeneous linewidth broadening feature of Si-QDs. Based on the simulation of non-phonon assisted recombination process, the full-band stretched exponential decay analysis confirms the correlation between inhomogeneous linewidth broadening and lifetime dispersion in Si-QDs.

36 MATERIALS SCIENCE↗

Dynamic versus Static Structure Functions and Novel Diffractive Effects in QCD

Initial- and final-state rescattering, neglected in the parton model, have a profound effect in QCD hard-scattering reactions, predicting single-spin asymmetries, diffractive deep inelastic scattering, diffractive hard hadronic reactions, the breakdown of the Lam Tung relation in Drell-Yan reactions, and nuclear shadowing and non-universal antishadowing--leading-twist physics not incorporated in the light-front wavefunctions of the target computed in isolation. I also discuss the use of diffraction to materialize the Fock states of a hadronic projectile and test QCD color transparency, and anomalous heavy quark effects. The presence of direct higher-twist processes where a proton is produced in the hard subprocess can explain the large proton-to-pion ratio seen in high centrality heavy ion collisions. I emphasize the importance of distinguishing between static observables such as the probability distributions computed from the square of the light-front wavefunctions versus dynamical observables which include the effects of rescattering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

WHERE DO WET, DRY, AND MIXED GALAXY MERGERS OCCUR? A STUDY OF THE ENVIRONMENTS OF CLOSE GALAXY PAIRS IN THE DEEP2 GALAXY REDSHIFT SURVEY

We study the environments of wet, dry, and mixed galaxy mergers at 0.75 < z < 1.2 using close pairs in the DEEP2 Galaxy Redshift Survey. We find that the typical environment of dry and mixed merger candidates is denser than that of wet mergers, mostly due to the color-density relation. While the galaxy companion rate (N{sub c}) is observed to increase with overdensity, using N-body simulations, we find that the fraction of pairs that will eventually merge decreases with the local density, predominantly because interlopers are more common in dense environments. After taking into account the merger probability of pairs as a function of local density, we find only marginal environment dependence of the galaxy merger rate for wet mergers. On the other hand, the dry and mixed merger rates increase rapidly with local density due to the increased population of red galaxies in dense environments, implying that the dry and mixed mergers are most effective in overdense regions. We also find that the environment distribution of K+A galaxies is similar to that of wet mergers alone and of wet+mixed mergers, suggesting a possible connection between K+A galaxies and wet and/or wet+mixed mergers. Based on our results, we therefore expect that the properties, including structures and masses, of red-sequence galaxies should be different between those in underdense regions and those in overdense regions since the dry mergers are significantly more important in dense environments. We conclude that, as early as z {approx} 1, high-density regions are the preferred environment in which dry mergers occur, and that present-day red-sequence galaxies in overdense environments have, on average, undergone 1.2 {+-} 0.3 dry mergers since this time, accounting for (38 {+-} 10)% of their mass accretion in the last 8 billion years. The main uncertainty in this finding is the conversion from the pair fraction to the galaxy merger rate, which is possibly as large as a factor of 2. Our findings suggest that dry mergers are crucial in the mass assembly of massive red galaxies in dense environments, such as brightest cluster galaxies in galaxy groups and clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark-matter halo assembly bias: Environmental dependence in the non-Markovian excursion-set theory

In the standard excursion-set model for the growth of structure, the statistical properties of halos are governed by the halo mass and are independent of the larger-scale environment in which the halos reside. Numerical simulations, however, have found the spatial distributions of halos to depend not only on their mass but also on the details of their assembly history and environment. Here we present a theoretical framework for incorporating this 'assembly bias' into the excursion-set model. Our derivations are based on modifications of the path-integral approach of Maggiore and Riotto that models halo formation as a non-Markovian random-walk process. The perturbed density field is assumed to evolve stochastically with the smoothing scale and exhibits correlated walks in the presence of a density barrier. We write down conditional probabilities for multiple barrier crossings and derive from them analytic expressions for descendant and progenitor halo mass functions and halo merger rates as a function of both halo mass and the linear overdensity δ {sub e} of the larger-scale environment of the halo. Our results predict a higher halo merger rate and higher progenitor halo mass function in regions of higher overdensity, consistent with the behavior seen in N-body simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Bayesian mass estimates of the Milky Way: the dark and light sides of parameter assumptions

We present mass and mass profile estimates for the Milky Way (MW) Galaxy using the Bayesian analysis developed by Eadie et al. and using globular clusters (GCs) as tracers of the Galactic potential. The dark matter and GCs are assumed to follow different spatial distributions; we assume power-law model profiles and use the model distribution functions described in Evans et al. and Deason et al. We explore the relationships between assumptions about model parameters and how these assumptions affect mass profile estimates. We also explore how using subsamples of the GC population beyond certain radii affect mass estimates. After exploring the posterior distributions of different parameter assumption scenarios, we conclude that a conservative estimate of the Galaxy’s mass within 125 kpc is 5.22×10{sup 11} M{sub ⊙}, with a 50% probability region of (4.79,5.63)×10{sup 11} M{sub ⊙}. Extrapolating out to the virial radius, we obtain a virial mass for the MW of 6.82×10{sup 11} M{sub ⊙} with 50% credible region of (6.06,7.53)×10{sup 11} M{sub ⊙}(r{sub vir}=185{sub −7}{sup +7} kpc). If we consider only the GCs beyond 10 kpc, then the virial mass is 9.02 (5.69,10.86)×10{sup 11} M{sub ⊙} (r{sub vir}=198{sub −24}{sup +19} kpc). We also arrive at an estimate of the velocity anisotropy parameter β of the GC population, which is β=0.28 with a 50% credible region (0.21, 0.35). Interestingly, the mass estimates are sensitive to both the dark matter halo potential and visible matter tracer parameters, but are not very sensitive to the anisotropy parameter.

79 ASTRONOMY AND ASTROPHYSICS↗

THE X-RAY POWER SPECTRAL DENSITY FUNCTION OF THE SEYFERT ACTIVE GALACTIC NUCLEUS NGC 7469

We present the broadband X-ray power spectral density (PSD) function of the X-ray-luminous Seyfert 1.2 NGC 7469, measured from Rossi X-ray Timing Explorer monitoring data and two XMM-Newton observations. We find significant evidence for a turnover in the 2-10 keV PSD at a temporal frequency of 2.0{sup +3.0}{sub -0.8} x 10{sup -6} Hz or 1.0{sup +3.0}{sub -0.6} x 10{sup -6} Hz, depending on the exact form of the break (sharply broken or slowly bending power law, respectively). The 'surrogate' Monte Carlo method of Press et al. was used to map out the probability distributions of PSD model parameters and obtain reliable uncertainties (68% confidence limits quoted here). The corresponding break timescale of 5.8 {+-} 3.5 days or 11.6{sup +17.5}{sub -8.7} days, respectively, is consistent with the empirical relation between PSD break timescale, black hole mass, and bolometric luminosity of McHardy et al. Compared to the 2-10 keV PSD, the 10-20 keV PSD has a much flatter shape at high temporal frequencies, and no PSD break is significantly detected, suggesting an energy-dependent evolution not unlike that exhibited by several Galactic black hole systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling of the Flows of Admixtures in a Random Layered Strip with Probable Arrangement of Inclusions Near the Boundaries of the Body

We study the random flow of admixtures in a two-phase stochastically inhomogeneous strip with the most probable arrangement of inclusions in the vicinity of the surfaces of the body. A mathematical model is formulated for the function of diffusion flow with nonzero constant initial concentration. A random diffusion flow is represented in the form of a Neumann series. The procedure of averaging of the random mass flow over the ensemble of phase configurations with arcsine distribution function is performed. The influence of the characteristics of the medium on the distribution of mass flow is analyzed. It is shown that if the diffusion coefficient of admixtures in the inclusion is higher than for the matrix, then the increase in the characteristic thickness of the layers causes a decrease in the value of the diffusion flow, whereas the mass flow in the entire body increases with the volume fraction of the inclusions.

97 MATHEMATICS AND COMPUTING↗

Sequential experimental design based generalised ANOVA

Over the last decade, surrogate modelling technique has gained wide popularity in the field of uncertainty quantification, optimization, model exploration and sensitivity analysis. This approach relies on experimental design to generate training points and regression/interpolation for generating the surrogate. In this work, it is argued that conventional experimental design may render a surrogate model inefficient. In order to address this issue, this paper presents a novel distribution adaptive sequential experimental design (DA-SED). The proposed DA-SED has been coupled with a variant of generalised analysis of variance (G-ANOVA), developed by representing the component function using the generalised polynomial chaos expansion. Moreover, generalised analytical expressions for calculating the first two statistical moments of the response, which are utilized in predicting the probability of failure, have also been developed. The proposed approach has been utilized in predicting probability of failure of three structural mechanics problems. It is observed that the proposed approach yields accurate and computationally efficient estimate of the failure probability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE TRANSITION LAYER BETWEEN THE THIN ACCRETION DISK AND THE HOT CORONA: CONSTRAINTS FROM THE THERMAL X-RAY LINE EMISSION

The observed continuum spectra in the low-luminosity active galactic nuclei, M81, can be reproduced by the advection-dominated accretion flow (ADAF)+thin disk/corona accretion flow model. We find that the best fit to the spectral energy distribution of M81 requires accretion rate m-dot =3 Multiplication-Sign 10{sup -4} for R {sub tr} = 60 R {sub S}. The observed H-like and He-like iron lines may probably be emitted from the transition layer between the vertically connected hot corona and cold thin disk. We model a power-law function of height z for the electron temperature in the transition layer, and calculate the thermal H-like and He-like iron line emission from M81. Combining the observations with our results, we find that the thickness of the transition layer is {approx}14%-23% of the thickness of the corona at the same radius. We discuss that the observed stronger H-like line emission than He-like line emission cannot be explained with the pure ADAF model. Our results provide useful constraints on the theoretical model for disk-corona connection.

79 ASTRONOMY AND ASTROPHYSICS↗

Framework for discrete-time quantum walks and a symmetric walk on a binary tree

We formulate a framework for discrete-time quantum walks, motivated by classical random walks with memory. We present a specific representation of the classical walk with memory 2, on which this is based. The framework has no need for coin spaces, it imposes no constraints on the evolution operator other than unitarity, and is unifying of other approaches. As an example we construct a symmetric discrete-time quantum walk on the semi-infinite binary tree. The generating function of the amplitude at the root is computed in closed form, as a function of time and the initial level n in the tree, and we find the asymptotic and a full numerical solution for the amplitude. It exhibits a sharp interference peak and a power-law tail, as opposed to the exponentially decaying tail of a broadly peaked distribution of the classical symmetric random walk on a binary tree. The probability peak is orders of magnitude larger than it is for the classical walk (already at small n). The quantum walk shows a polynomial algorithmic speedup in n over the classical walk, which we conjecture to be of the order 2/3, based on strong trends in data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light-cone wave function approach to open heavy flavor dynamics in QCD matter

We calculate the lowest-order charm and beauty parton distribution functions in and fragmentation functions into D and B mesons using the operator definitions of factorized perturbative quantum chromodynamics (QCD). In the vacuum, we find the leading corrections that arise from the structure of the final-state hadrons. Quark-antiquark potentials extracted from the lattice are employed to demonstrate the existence of open heavy flavor bound-state solutions in the quark-gluon plasma in the vicinity of the critical temperature. We provide first results for the in-medium modification of the heavy-quark distribution and decay probabilities in a comoving plasma. In an improved perturbative QCD description of heavy-flavor dynamics in the thermal medium, we combine D- and B-meson formation and dissociation with parton-level charm and beauty quark quenching to obtain predictions for the heavy-meson and nonphotonic-electron suppression in Cu+Cu and Pb+Pb collisions at the Relativistic Heavy Ion Collider and the Large Hadron Collider, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The DESI One-Percent Survey: Constructing Galaxy–Halo Connections for ELGs and LRGs Using Auto and Cross Correlations

In the current Dark Energy Spectroscopic Instrument (DESI) survey, emission line galaxies (ELGs) and luminous red galaxies (LRGs) are essential for mapping the dark matter distribution at z ~ 1. We measure the auto and cross correlation functions of ELGs and LRGs at 0.8 < z ≤ 1.0 from the DESI One-Percent survey. Following Gao et al., we construct the galaxy–halo connections for ELGs and LRGs simultaneously. With the stellar–halo mass relation for the whole galaxy population (i.e., normal galaxies), LRGs can be selected directly by stellar mass, while ELGs can also be selected randomly based on the observed number density of each stellar mass, once the probability P sat of a satellite galaxy becoming an ELG is determined. We demonstrate that the observed small scale clustering prefers a halo mass-dependent P sat model rather than a constant. With this model, we can well reproduce the auto correlations of LRGs and the cross correlations between LRGs and ELGs at r p > 0.1 Mpc h –1 . We can also reproduce the auto correlations of ELGs at r p > 0.3 Mpc h –1 (s > 1 Mpc h –1 ) in real (redshift) space. Although our model has only seven parameters, we show that it can be extended to higher redshifts and reproduces the observed auto correlations of ELGs in the whole range of 0.8 < z ≤ 1.6, which enables us to generate a lightcone ELG mock for DESI. With the above model, we further derive halo occupation distributions for ELGs, which can be used to produce ELG mocks in coarse simulations without resolving subhalos.

79 ASTRONOMY AND ASTROPHYSICS↗

COMPRESSIBLE 'TURBULENCE' OBSERVED IN THE HELIOSHEATH BY VOYAGER 2

This paper describes the multiscale structure of the compressible 'turbulence' observed in the high-resolution (48 s) observations of the magnetic field strength B made by Voyager 2 (V2) in the heliosheath behind the termination shock from 2007 DOY 245.0-300.8 and in a unipolar region from 2008 DOY 2.9-75.6. The magnetic field strength is highly variable on scales from 48 s to several hours in both intervals. The distributions of daily averages and 48 s averages of B are lognormal in the post-termination shock (TS) region and Gaussian in the unipolar region, respectively. The amplitudes of the fluctuations were greater in the post-TS region than in the unipolar region, at scales less than several hours. The multiscale structure of the increments of B is described by the q-Gaussian distribution of nonextensive statistical mechanics on all scales from 48 s to 3.4 hr in the unipolar region and from 48 s to 6.8 hr in the post-TS region, respectively. The amplitudes of the fluctuations of increments of B are larger in the post-TS region than in the unipolar region at all scales. The probability density functions of the increments of B are non-Gaussian at all scales in the unipolar region, but they are Gaussian at the largest scales in the post-TS region. Time series of the magnitude and direction of B show that the fluctuations are highly compressive. The small-scale fluctuations are a mixture of coherent structures (semi-deterministic structures) and random structures, which vary significantly from day to day. Several types of coherent structures were identified in both regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neutral Current Elastic Scattering and the Strange Spin Structure of the Proton

Neutrinos can be used as a unique and informative probe of the structure within nucleons. This thesis presents the tools and methodology for studying the strange quark spin in the nucleon through neutral current elastic neutrino-proton scattering in the MicroBooNE experiment located at the Fermi National Accelerator Lab. An automated boosted decision tree based proton identification algorithm is used to select proton in liquid argon TPC data with a 70\% efficiency. After a set of protons are selected, a logistic regression model is used to select neutral current elastic proton interactions in MicroBooNE. Neutral current elastic proton interactions are selected with an 11\% efficiency and 30\% purity. The number of selected events measured in MicroBooNE data as a function of $Q^2$ is compared directly to the number of selected events in MicroBooNE simulation. An event reweighting scheme is used to vary the expected number of eventsin MicroBooNE simulation based on the values o f the physics parameters of interest. The likelihood for any given value of the physical parameters can then be easily calculated and the probability distributions of the physics parameters can be sampled using Markov Chain Monte Carlo. Future improvements to the detector physics models in MicroBooNE are required for a precise determination of the strange quark spin structure in the proton. With the current level of uncertainty on the detector physics models, we are only able to constrain the net strange quark spin, $\Delta s$ to the range $-1.8 < \Delta s < 3.8$ with 95\% confidence.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

General Description of Fission Observables: GEF Model Code

The GEF (“GEneral description of Fission observables”) model code is documented. It describes the observables for spontaneous fission, neutron-induced fission and, more generally, for fission of a compound nucleus from any other entrance channel, with given excitation energy and angular momentum. The GEF model is applicable for a wide range of isotopes from Z = 80 to Z = 112 and beyond, up to excitation energies of about 100 MeV. The results of the GEF model are compared with fission barriers, fission probabilities, fission-fragment mass- and nuclide distributions, isomeric ratios, total kinetic energies, and prompt-neutron and prompt-gamma yields and energy spectra from neutron-induced and spontaneous fission. Derived properties of delayed neutrons and decay heat are also considered. The GEF model is based on a general approach to nuclear fission that explains a great part of the complex appearance of fission observables on the basis of fundamental laws of physics and general properties of microscopic systems and mathematical objects. The topographic theorem is used to estimate the fission-barrier heights from theoretical macroscopic saddle-point and ground-state masses and experimental ground-state masses. Motivated by the theoretically predicted early localisation of nucleonic wave functions in a necked-in shape, the properties of the relevant fragment shells are extracted. These are used to determine the depths and the widths of the fission valleys corresponding to the different fission channels and to describe the fission-fragment distributions and deformations at scission by a statistical approach. A modified composite nuclear-level-density formula is proposed. It respects some features in the superfluid regime that are in accordance with new experimental findings and with theoretical expectations. These are a constant-temperature behaviour that is consistent with a considerably increased heat capacity and an increased pairing condensation energy that is consistent with the collective enhancement of the level density. The exchange of excitation energy and nucleons between the nascent fragments on the way from saddle to scission is estimated according to statistical mechanics. As a result, excitation energy and unpaired nucleons are predominantly transferred to the heavy fragment in the superfluid regime. This description reproduces some rather peculiar observed features of the prompt-neutron multiplicities and of the even-odd effect in fission-fragment Z distributions. For completeness, some conventional descriptions are used for calculating pre-equilibrium emission, fission probabilities and statistical emission of neutrons and gamma radiation from the excited fragments. Preference is given to simple models that can also be applied to exotic nuclei compared to more sophisticated models that need precise empirical input of nuclear properties, e.g. spectroscopic information. The approach reveals a high degree of regularity and provides a considerable insight into the physics of the fission process. Fission observables can be calculated with a precision that complies with the needs for applications in nuclear technology without specific adjustments to measured data of individual systems. The GEF executable runs out of the box with no need for entering any empirical data. This unique feature is of valuable importance, because the number of systems and energies of potential significance for fundamental and applied science will never be possible to be measured. The relevance of the approach for examining the consistency of experimental results and for evaluating nuclear data is demonstrated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗