Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Aboveground and belowground contributions to ecosystem respiration in a temperate deciduous forest

In this study, we developed a three-way carbon dioxide (CO 2 ) flux-partitioning algorithm that separates net ecosystem exchange (NEE) into aboveground plant respiration (R above ), belowground root and soil respiration (R below ), and gross primary production (GPP). We applied this algorithm to a coupled dataset of continuous chamber-measured soil respiration and eddy covariance (EC)-measured NEE of CO 2 in an oak-hickory (Quercus-Carya) deciduous broadleaf forest from 2006 to 2015. We found that on annual time scale, R below dominated over R above with the former accounting for 66.9–86.4% and the latter 13.6–33.1%, of the total ecosystem respiration (R eco ). The ratio of R below to R above varied seasonally, ranging from 1.77 to 7.25 in growing season, and 1.02 to 4.57 in non-growing season. The temperature sensitivity (E 0 ) of R below was significantly higher than that of R above , and E 0 of R eco responded differently to air and soil temperature. Over the whole study period, annual mean R above , R below , and GPP were 243, 806, and 1170 g C m –2 , respectively, with annual R eco accounting for 89.6% of GPP, of which 68.8% was lost as R below and 20.8% lost as R above , and leaving only 10% of the carbon fixation in ecosystems. Furthermore, these estimates, however, did not consider potential light inhibition of leaf respiration. If we accept the presence of light inhibition, then the daytime three-way partitioning method would underestimate annual R above by 20.4% whereas the nighttime method would overestimate R above by 23.9% and GPP by 4.7%, compared with estimates accounting for light inhibition in leaves.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Extended virtual element method for the Laplace problem with singularities and discontinuities

In this paper, we propose the extended virtual element method (X-VEM) to treat singularities and crack discontinuities that arise in the Laplace problem. The virtual element method (VEM) is a stabilized Galerkin formulation on arbitrary polytopal meshes, wherein the basis functions are implicit (virtual)—they are not known explicitly nor do they need to be computed within the problem domain. In this work, suitable projection operators are used to decompose the bilinear form on each element into two parts: a consistent term that reproduces the first-order polynomial space and a correction term that ensures stability. A similar approach is pursued in the X-VEM with a few notable extensions. To capture singularities and discontinuities in the discrete space, we augment the standard virtual element space with an additional contribution that consists of the product of virtual nodal basis (partition-of-unity) functions with enrichment functions. For discontinuities, basis functions are discontinuous across the crack and for singularities a weakly singular enrichment function that satisfies the Laplace equation is chosen. For the Laplace problem with a singularity, we devise an extended projector that maps functions that lie in the extended virtual element space onto linear polynomials and the enrichment function, whereas for the discontinuous problem, the consistent element stiffness matrix has a block-structure that is readily computed. An adaptive homogeneous numerical integration method is used to accurately and efficiently (no element-partitioning is required) compute integrals with integrands that are weakly singular. Once the element projection matrix is computed, the same steps as in the standard VEM are followed to compute the element stabilization matrix. Numerical experiments are performed on quadrilateral and polygonal (convex and nonconvex elements) meshes for the problem of an $\textit{L}$-shaped domain with a corner singularity and the problem of a cracked membrane under mode III loading, and results are presented that affirm the sound accuracy and demonstrate the optimal rates of convergence in the $\textit{L}^2$ norm and energy of the proposed method.

42 ENGINEERING↗
DOE OSTI2019

Toward scalable many-body calculations for nuclear open quantum systems using the Gamow Shell Model

Drip-line nuclei have very different properties from those of the valley of stability, as they are weakly bound and resonant. Therefore, the models devised for stable nuclei can no longer be applied therein. Hence, a new theoretical tool, the Gamow Shell Model (GSM), has been developed to study the many-body states occurring at the limits of the nuclear chart. GSM is a configuration interaction model based on the use of the so-called Berggren basis, which contains bound, resonant and scattering states, so that inter-nucleon correlations are fully taken into account and the asymptotes of extended many-body wave functions are precisely handled. However, large complex symmetric matrices must be diagonalized in this framework, therefore the use of very powerful parallel machines is needed therein. So, in order to fully take advantage of their power, a 2D partitioning scheme using hybrid MPI/OpenMP parallelization has been developed in our GSM code. The specificities of the 2D partitioning scheme in the GSM framework will be described and illustrated with numerical examples. It will then be shown that the introduction of this scheme in the GSM code greatly enhances its capabilities.

2D partitioning↗
DOE OSTI2023

Orientation matters: Measuring the correct surface of polyamide membranes with quartz crystal microbalance

The surface of polyamide reverse osmosis (RO) membranes which regulates interface-dominated phenomena, such as partitioning and fouling, is the one facing the feed during operation. However, the opposite surface of the polyamide selective layer, the one facing the permeate and in contact with the polysulfone porous support, is commonly analyzed in quartz crystal microbalance (QCM) measurements due to limitations of state-of-the-art transfer methodologies. Such measurements on the back surface cannot be generalized because the polyamide layer is chemically and morphologically asymmetric. Herein, we introduce a simple method to coat QCM sensors with polyamide active layers in the correct orientation (i.e., exposing their front surface) and show that interface-dominated phenomena differ significantly between orientations. We start by describing a transfer protocol to coat any surface with a polyamide layer on its front surface orientation. We then systematically analyze the chemical and morphological differences between the two surfaces of the polyamide layer of a commercial RO membrane. Finally, we demonstrate that interface-dominated phenomena depend on the orientation by showing that NaCl partitioning at pH 6 was 1.3 to 2.3-fold higher on the front surface and that organic fouling with humic acid occurred at a lower rate on this surface. The new method presented herein enables measurements on the front surface of polyamide RO membranes, which should be the standard in any future QCM studies.

Fouling behavior↗
DOE OSTI2021

A review of rare earth elements and yttrium in coal ash: Content, modes of occurrences, combustion behavior, and extraction methods

Rare earth elements and yttrium (REY) have attracted considerable attention over the last decade because of their vital roles in clean energy, consumer product, national defense and security applications, among other uses. Due to the retention of REY during coal burning, coal combustion ash is considered as potential alternative sources for REY. Understanding the content, speciation, retention and/or transformation behavior of REY during coal combustion not only expands our knowledge of the combustion behavior of the trace elements in coal, but also provides basis for modeling REY partitioning during coal combustion and for developing economically viable REY recovery technologies. This review makes a critical summary of recent progress in the study of REY in coal ash. The contents and the extraction potentials of REY in coal ash derived from 15 major coal-producing countries worldwide were summarized and evaluated. Various analytical methods for determining REY bulk contents and speciation, together with the solid sample pretreatment, analytical accuracy and precision, advantages and disadvantages were summarized and compared. Modern analytical approaches combined indirect methods (e.g., sequential extraction) shed light on the physical distribution, mineralogy, and the chemical state of REY in coal ash. Three types of REY occurrences in coal ash, including Si-Al glassy association, discrete minerals or compounds, and organic association (bound with unburned carbon) were defined in the review. The glassy association can be further divided into REY minerals closely bound to glass phases and dispersed throughout the glassy structure. REY partitioning in various emission streams, the size distribution, and their enrichment behavior in coal ash were discussed. Additionally, thermal behavior and transformation of various REY forms in coal during combustion process, including organic-associated REY, REY phosphates, REY carbonates, clay-bound REY and among others were summarized. Two possible retention mechanisms of REY by aluminosilicate glass at boiler temperature were proposed: the incorporation of the individual REY phases into the glass as inclusions and the diffusion of REY phases throughout Si-Al glass structures in the melting process. Feed coal mineral types, mineral-mineral associations, boiler conditions, and other factors control the retention process. After coal combustion, the speciation of REY in fly ash may be modified by the reactions of REY phases with flue gas components. Further, an overview of REY transformation mechanisms during coal combustion was deeply discussed. Finally, current extraction techniques for REY recovery from coal combustion ash were introduced. Future outlooks and research problems were also identified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Wave climate and energy resources in the Mariana Islands from a 42-year high-resolution hindcast

We report a high-resolution wave hindcast from 1979 to 2020 was developed for Guam and the Commonwealth of the Northern Mariana Islands, which are influenced by mesoscale and synoptic weather systems from the western Pacific Rim to the Central Pacific. The spectral wave modeling utilized structured global and unstructured regional grids with improved resolution in nearshore waters, where wave resources development is most feasible. The hindcast demonstrates its capability in capturing multi-modal seas through reproduction of bulk and partitioned wave parameters derived from altimetry and buoy measurements. The local wave climate is influenced by the year-round trade winds and tropical cyclones as well as seasonal monsoons, frontal systems, and mid-latitude high- and low-pressure systems. The strong intra-annual variation of the significant wave height and power flux reflects transitions between local and distant weather systems, which account for the diverse wave conditions comprised of short-period wind waves, intermediate-period seas, and long-period swells around the islands. Among the Pacific island regions, spectral partitioning is particularly important for describing the dominant wave components by period and direction with pertinent information conducive to energy resources characterization and coastal zone management in the Mariana Islands.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Energetic Insights into the Role of Quaternary Ammonium Cations in Zeolite Synthesis

The thermodynamics of partitioning of an organic structure-directing agent (OSDA) between water and an organic solvent such as chloroform or trichloroethane serve as a proxy for energetic interactions during zeolite synthesis. Using several newly synthesized OSDAs, we have extended our earlier calorimetric and partitioning studies of the thermodynamics of transfer to separate effects of charge (C/N + ratio) and structure in a series of structurally related OSDAs. The Gibbs free energies of transfer are close to zero, resulting from a balance of strongly exothermic and relatively similar enthalpies and strongly negative and relatively similar entropies of transfer. There is no obvious correlation between the thermodynamics of transfer and the efficacy of a given OSDA in the zeolite synthesis. Finally, one must conclude that with bulk energetics of transfer being similar in most cases studied, the critical factors in OSDA function in zeolite synthesis are kinetically rather than thermodynamically controlled and arise from differences in activation energies related to details of OSDA structure and interactions during nucleation of possible zeolite precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Characterizing Airborne Phthalate Concentrations and Dynamics in a Normally Occupied Residence

Phthalate esters, commonly used as plasticizers, can be found indoors in the gas phase, in airborne particulate matter, in dust, and on surfaces. The dynamic behavior of phthalates indoors is not fully understood. In this study, time-resolved measurements of airborne phthalate concentrations and associated gas-particle partitioning data were acquired in a normally occupied residence. The vapor pressure and associated gas-particle partitioning of measured phthalates influenced their airborne dynamic behavior. Concentrations of higher vapor pressure phthalates correlated well with indoor temperature, with little discernible influence from direct occupant activity. Conversely, occupant-related behaviors substantially influenced the concentrations and dynamic behavior of a lower vapor pressure compound, diethylhexyl phthalate (DEHP), mainly through production of particulate matter during cooking events. The proportion of airborne DEHP in the particle phase was experimentally observed to increase under higher particle mass concentrations and lower indoor temperatures in correspondence with theory. Experimental observations indicate that indoor surfaces of the residence are large reservoirs of phthalates. The results also indicate that two key factors influenced by human behavior-temperature and particle mass concentration-cause short-term changes in airborne phthalate concentrations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Adsorption Studies of Dilute Krypton and Xenon from Nitrogen on SBMOF-1 and Activated Charcoal for Applications in Isotope Harvesting

Adsorptive partitioning of dilute krypton (Kr) and xenon (Xe) onto Stony Brook Metal–Organic Framework (SBMOF-1) and activated charcoal (AC) from carrier nitrogen was experimentally measured at temperatures ranging from 195 to 293 K. For this purpose, a closed-loop system for gas adsorption experiments was developed. From the Kr adsorption measurements, the adsorption equilibrium constant for Kr on SBMOF-1 was calculated, yielding a value for the enthalpy of adsorption of −19 ± 1 kJ·mol –1 . The partition coefficients were utilized to estimate the extraction rates of 76 Kr, 77 Kr, and 122 Xe isotopes during isotope harvesting at the Facility for Rare Isotope Beams (FRIB). We conclude that both materials showed promising results for the extraction of noble gases from FRIB effluents using temperature swing adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ultrasound-Assisted Nonthermal, Nonequilibrium Separation of Organic Molecules from Their Binary Aqueous Solutions: Effect of Solute Properties on Separation

The separation of organic molecules in downstream processes, such as distillation, plays a vital role in biobased chemical production. A comprehensive study was performed here using ultrasonic energy to separate 11 organic molecules from their binary aqueous solutions under nonthermal, nonequilibrium, and phase-change free conditions. A batch sonoseparator with a three-stage mist collection unit allowed direct analysis of ultrasound-generated mist with an HPLC/GC and differentiation and quantification of the vapor and mist. The results showed that the alcohols (1-butanol, ethanol, 1-propanol, and methanol) and acetone were enriched in the ultrasound-generated mist with enrichment ratios of 3.2–5. On the other hand, ethylene glycol, glycerol, γ-valerolactone (GVL), glucose, and sucrose were diluted with dilution ratios in the range of 2.04–15.7 in the mist and vapor generated by ultrasound (or concentrated in the bulk solution). No enrichment nor dilution of acetic acid was observed. The role of various physicochemical parameters such as dynamic viscosity, surface tension, Henry’s law of solubility constant, vapor pressure, and octanol–water partition coefficient in the enrichment was examined. Furthermore, the hydrophobicity of the organic molecules represented by the octanol–water partition coefficient was found to play a crucial role in determining the separation characteristics of the molecules in ultrasound-generated mist and vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Identifying Green Solvent Mixtures for Bioproduct Separation Using Bayesian Experimental Design

Liquid–liquid extraction (LLE) is a widely used technique for the separation and purification of liquid-phase products with applications in various industries, including pharmaceuticals, petrochemicals, and renewable chemistry. A critical step in the design of an LLE process is the selection of appropriate solvents. This study presents a new methodology for identifying solvent mixtures for bioproduct separation using Bayesian experimental design (BED). Motivated by the need for environmentally friendly and effective separation methods, we address the challenge of selecting solvent systems that balance separation efficiency, selectivity, and environmental impact while also tackling the difficulty of separating multiple bioproducts using complex solvent systems. Our approach specifically seeks to predict product partition coefficients (log10 Kp values) as thermodynamic parameters underlying solvent selection. The iterative approach integrates Bayesian optimization with experimental measurements to guide solvent selection and leverages COSMO-RS simulations to enhance high-throughput experimentation. Using the design of solvent systems for the separation of lignin-derived aromatic products via centrifugal partition chromatography (CPC) as a case study, we show that within seven iterations/cycles of the methodology, we can identify new mixtures of green solvents that align with CPC design principles. Furthermore, these results demonstrate the efficacy of the BED framework in optimizing green solvent systems for complex separations, highlighting the potential of this method to advance the field of green chemistry and contribute to the development of sustainable industrial processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Using an Isotope Enabled Mass Balance to Evaluate Existing Land Surface Models

Abstract Land surface models (LSMs) play a crucial role in elucidating water and carbon cycles by simulating processes such as plant transpiration and evaporation from bare soil, yet calibration often relies on comparing LSM outputs of landscape total evapotranspiration ( ET ) and discharge with measured bulk fluxes. Discrepancies in partitioning into component fluxes predicted by various LSMs have been noted, prompting the need for improved evaluation methods. Stable water isotopes serve as effective tracers of component hydrologic fluxes, but data and model integration challenges have hindered their widespread application. Leveraging National Ecological Observation Network measurements of water isotope ratios at 16 US sites over 3 years combined with LSM‐modeled fluxes, we employed an isotope‐enabled mass balance framework to simulate ET isotope values ( δET ) within three operational LSMs (Mosaic, Noah, and VIC) to evaluate their partitioning. Models simulating δET values consistent with observations were deemed more reflective of water cycling in these ecosystems. Mosaic exhibited the best overall performance (Kling‐Gupta Efficiency of 0.28). For both Mosaic and Noah there were robust correlations between bare soil evaporation fraction and error (negative) as well as transpiration fraction and error (positive). We found the point at which errors are smallest ( x ‐intercept of the multi‐site regression) is at a higher transpiration fraction than is currently specified in the models. Which means that transpiration fraction is underestimated on average. Stable isotope tracers offer an additional tool for model evaluation and identifying areas for improvement, potentially enhancing LSM simulations and our understanding of land‐surface hydrologic processes.

58 GEOSCIENCES↗
DOE OSTI2023

New formation and fate of Isoprene SOA markers revealed by field data-constrained modeling

Particulate 2-methyltetrols (2-MT) and 2-methylglyceric acid (2-MG) are typically used to indicate the abundance of isoprene-derived secondary organic aerosols (SOA). However, their formation and fate are not fully understood. In this study, we showed that particulate 2-MT and 2-MG collected at multiple monitoring sites under a wide range of atmospheric and emission conditions, with concentrations spanning six orders of magnitudes, are well reproduced with an expanded isoprene-SOA scheme implemented into the Community Multiscale Air Quality (CMAQ) model. The scheme considers their three-phase (gas-aqueous-organic phase) partitioning, formation from acid-driven multiphase reactions, and degradation by OH radicals in the gas and aqueous phases. The model results reveal that a non-aqueous formation pathway or direct biogenic emission is needed to supplement the commonly assumed acid-driven multiphase reaction process to explain the observed 2-MT concentrations. This missing pathway contributes to 20–40% of 2-MT in areas with aerosol pH < 2 and more than 70% under less acidic conditions (pH~2–5), such as those encountered in the western US and China. The typical summertime gas-phase photochemical lifetimes of 2-MT and 2-MG are estimated to be 4–6 and 20–30 h, respectively, and their aqueous lifetimes are approximately 20–40 h. Our simulations show that predicted 2-MT is mainly influenced by its aqueous phase loss to OH, but 2-MG is more sensitive to gas phase OH loss due to the preferential partitioning of the two tracers in the aqueous and gas phases, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A Maize GT14 Family Glycosyltransferase Affects Cell Wall Composition and Carbohydrate Export from Source Leaves

Sucrose translocation from photosynthetic leaves to distant parts of a plant, such as seeds and roots, is a critical aspect of plant growth and development and a major determinant of crop yield. To identify genes contributing to this process in maize (Zea mays), we isolated four allelic mutants, carbohydrate partitioning defective7, 48, 49 (cpd7, cpd48, cpd49) and a UniformMu insertion (mu1049954), all of which exhibited reduced growth and fertility and hyperaccumulation of starch and soluble sugars in mature leaves. Consistent with carbohydrate accumulation, cpd7 mutants exhibited reduced sucrose export from mature leaves. Cpd7 encodes a Golgi-resident glucuronosyltransferase belonging to the Glycosyltransferase14 (GT14) family, which is involved in decoration of type II arabinogalactan proteins. No previously described GT14 mutants exhibit reduced sucrose transport or carbohydrate partitioning defects. Additionally, we show that mature leaves of cpd7 mutants have reduced cellulose content and an altered cell wall composition. Further, cpd7 mutants exhibit ectopic phloem lignification likely as a compensatory mechanism for reduced cell wall integrity. Collectively, our data suggest that Cpd7 functions to facilitate cell wall development in the phloem, which is required for efficient sucrose export from mature maize leaves.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

True Load Balancing for Matricized Tensor Times Khatri-Rao Product

MTTKRP is the bottleneck operation in algorithms used to compute the CP tensor decomposition. For sparse tensors, utilizing the compressed sparse fibers (CSF) storage format and the CSF-oriented MTTKRP algorithms is important for both memory and computational efficiency on distributed-memory architectures. Existing intelligent tensor partitioning models assume the computational cost of MTTKRP to be proportional to the total number of nonzeros in the tensor. However, this is not the case for the CSF-oriented MTTKRP on distributed-memory architectures. We outline two deficiencies of nonzero-based intelligent partitioning models when CSF-oriented MTTKRP operations are performed locally: failure to encode processors' computational loads and increase in total computation due to fiber fragmentation. We focus on existing fine-grain hypergraph model and propose a novel vertex weighting scheme that enables this model encode correct computational loads of processors. We also propose to augment the fine-grain model by fiber nets for reducing the increase in total computational load via minimizing fiber fragmentation. In this way, the proposed model encodes minimizing the load of the bottleneck processor. In conclusion, parallel experiments with real-world sparse tensors on up to 1024 processors prove the validity of the outlined deficiencies and demonstrate the merit of our proposed improvements in terms of parallel runtimes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Allometric scaling laws linking biomass and rooting depth vary across ontogeny and functional groups in tropical dry forest lianas and trees

There are two theories about how allocation of metabolic products occurs. The allometric biomass partitioning theory (APT) suggests that all plants follow common allometric scaling rules. The optimal partitioning theory (OPT) predicts that plants allocate more biomass to the organ capturing the most limiting resource. In this work, whole-plant harvests of mature and juvenile tropical deciduous trees, evergreen trees, and lianas and model simulations were used to address the following knowledge gaps: (1) Do mature lianas comply with the APT scaling laws or do they invest less biomass in stems compared to trees? (2) Do juveniles follow the same allocation patterns as mature individuals? (3) Is either leaf phenology or life form a predictor of rooting depth? It was found that: (1) mature lianas followed the same allometric scaling laws as trees; (2) juveniles and mature individuals do not follow the same allocation patterns; and (3) mature lianas had shallowest coarse roots and evergreen trees had the deepest. It was demonstrated that: (1) mature lianas invested proportionally similar biomass to stems as trees and not less, as expected; (2) lianas were not deeper-rooted than trees as had been previously proposed; and (3) evergreen trees had the deepest roots, which is necessary to maintain canopy during simulated dry seasons.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Variation in sugarcane biomass composition and enzymatic saccharification of leaves, internodes and roots

The composition of biomass determines its suitability for different applications within a biorefinery system. The proportion of the major biomass fractions (sugar, cellulose, hemicellulose and lignin) may vary in different sugarcane genotypes and growth environments and different parts of the plant. This study investigated the composition of mature and immature internodes, roots and mature leaves of sugarcane. Internodes were found to have a significantly larger alcohol-soluble component than leaves and roots. The primary difference between the immature and mature internodes was the ratio of soluble sugars. In mature tissues, sucrose content was significantly higher, whereas in immature internodal tissues there was lower sucrose and heightened concentrations of reducing sugars. Carbon (C) partitioning in leaf tissues was characterised by low levels of soluble components and high “other” and cell wall fractions. Root tissue had low ratios of soluble fractions relative to their cell wall contents, indicating a lack of storage of soluble carbon. There was no significant difference in the ratio of the major cell wall fractions between the major organ types. Characterisation of individual non-cellulosic monomers indicated leaf and root tissues had significantly higher arabinose and galactose fractions. Significantly larger proportions of syringyl lignin compounds and the hydroxycinnamic compound, p-coumaric acid were observed in mature internodal tissues compared to the other tissue types. Tissue-specific differences in composition were shown to greatly affect the recalcitrance of the cell wall to enzymatic saccharification. Overall, this study displayed clear evidence of the differential partitioning of C throughout the sugarcane plant in specific organs. These organ-specific differences have major implications in their utility as a bioproduct feedstock. For example, the inclusion of trash (leaves) with the culms (internodes) may alter processing efficiency.

09 BIOMASS FUELS↗
NASA NTRS2022

Source Decomposition of Eddy-Covariance CO 2 Flux Measurements for Evaluating a High-Resolution Urban CO 2 Emissions Inventory

We present the comparison of source-partitioned CO2 flux measurements with a high-resolution urban CO 2 emissions inventory (Hestia). Tower-based measurements of CO and 14 C are used to partition net CO 2 flux measurements into fossil and biogenic components. A flux footprint model is used to quantify spatial variation in flux measurements. We compare the daily cycle and spatial structure of Hestia and eddy-covariance derived fossil fuel CO 2 emissions on a seasonal basis. Hestia inventory emissions exceed the eddy-covariance measured emissions by 0.36 µ mol m −2 s −1 (3.2%) in the cold season and 0.62 µ mol m −2 s −1 (9.1%) in the warm season. The daily cycle of fluxes in both products matches closely, with correlations in the hourly mean fluxes of 0.86 (cold season) and 0.93 (warm season). The spatially averaged fluxes also agree in each season and a persistent spatial pattern in the differences during both seasons that may suggest a bias related to residential heating emissions. In addition, in the cold season, the magnitudes of average daytime biological uptake and nighttime respiration at this flux site are approximately 15% and 27% of the mean fossil fuel CO 2 emissions over the same time period, contradicting common assumptions of no significant biological CO 2 exchange in northern cities during winter. This work demonstrates the effectiveness of using trace gas ratios to adapt eddy-covariance flux measurements in urban environments for disaggregating anthropogenic CO 2 emissions and urban ecosystem fluxes at high spatial and temporal resolution.

eddy-covariance flux measurements↗