Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTICLE SIZE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Lipoprotein subfraction patterns throughout gestation in The Gambia: changes in subfraction composition and their relationships with infant birth weights

Lipoprotein subfraction concentrations have been shown to change as gestation progresses in resource-rich settings. The objective of the current study was to evaluate the impact of pregnancy on different-sized lipoprotein particle concentrations and compositions in a resource-poor setting. Samples were collected from pregnant women in rural Gambia at enrollment (8–20 weeks), 20 weeks, and 30 weeks of gestation. Concentrations of different-sized high-density, low-density, and triglyceride-rich lipoprotein particles (HDL, LDL, and TRL, respectively) were measured by nuclear magnetic resonance in 126 pooled plasma samples from a subset of women. HDL was isolated and the HDL proteome evaluated using mass spectroscopy. Subfraction concentrations from women in The Gambia were also compared to concentrations in women in the U.S. in mid gestation. Total lipoprotein particles and all-sized TRL, LDL, and HDL particle concentrations increased during gestation, with the exception of medium-sized LDL and HDL particles which decreased. Subfraction concentrations were not associated with infant birth weights, though relationships were found between some lipoprotein subfraction concentrations in women with normal versus low birth weight infants (< 2500 kg). HDL’s proteome also changed during gestation, showing enrichment in proteins associated with metal ion binding, hemostasis, lipid metabolism, protease inhibitors, proteolysis, and complement activation. Compared to women in the U.S., Gambian women had lower large- and small-sized LDL and HDL concentrations, but similar medium-sized LDL and HDL concentrations. Most lipoprotein subfraction concentrations increase throughout pregnancy in Gambian women and are lower in Gambian vs U.S. women, the exception being medium-sized LDL and HDL particle concentrations which decrease during gestation and are similar in both cohorts of women. The proteomes of HDL also change in ways to support gestation. These changes warrant further study to determine how a lack of change or different changes could impact negative pregnancy outcomes.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Interfacial Reactivity of Silicon Electrodes: Impact of Electrolyte Solvent and Presence of Conductive Carbon

Silicon (Si) is a promising high-capacity material for lithium-ion batteries; however, its limited reversibility hinders commercial adoption. Approaches such as particle and crystallite size reduction, introduction of conductive carbon, and use of different electrolyte solvents have been explored to overcome these electrochemical limitations. Herein, operando isothermal microcalorimetry (IMC) is used to probe the influence of silicon particle size, electrode composition, and electrolyte additives fluoroethylene carbonate and vinylene carbonate on the heat flow during silicon lithiation. In this work, the IMC data are complemented by X-ray photoelectron and Raman spectroscopies to elucidate differences in solid electrolyte interphase (SEI) composition. Nanosized (~50 nm, n-Si) and micrometer-sized (~4 μm, μ-Si) silicon electrodes are formulated with and without amorphous carbon and electrochemically lithiated in ethylene carbonate (EC), fluoroethylene carbonate (FEC), or vinylene carbonate (VC) based electrolytes. Notably, n-Si electrodes generate 53–61% more normalized heat relative to their μ-Si counterparts, consistent with increased surface area and electrode/electrolyte reactivity. Introduction of amorphous carbon significantly alters the heat flow profile where multiple exothermic peaks and increased normalized heat dissipation are observed for all electrolyte types. Notably, the VC-containing electrolyte demonstrates the greatest normalized heat dissipation of the electrode compositions tested showing as much as a 50% increase compared to the EC or FEC counterparts. The results are relevant to the understanding of silicon negative electrode function in the presence of electrolyte additives and provide insight relative to silicon containing cell reactivity and safety.

25 ENERGY STORAGE↗
DOE OSTI2024

High-accuracy method for modeling nucleation and growth of particles

State-of-the-art numerical models describing the kinetics of aerosol particle nucleation and growth from a cooling vapor primarily use a nodal method, in which particles that are smaller than the critical size are omitted from consideration because they are thermodynamically unfavorable. This omission is based on the assumption that most newly formed particles are above the critical size, so that subcritical-size particles are not important to take into account. Due to the nature of the nodal method, it suffers from numerical diffusion, which can cause an artificial broadening of the cluster size distribution leading to a significant overestimation of the number of large-size particles. To address these issues, we propose a more accurate numerical method that explicitly models particles of all sizes, and uses a special numerical scheme that substantially reduces the numerical diffusion and provides high solution accuracy and numerical stability. We extensively compare this novel method to the commonly used nodal solver of the general dynamic equation (GDE) for particle growth and demonstrate that it offers GDE solutions with higher accuracy with low numerical diffusion. Incorporating small subcritical clusters into the solution is crucial for: 1) more precise determination of the entire particle size distribution function and 2) wider applicability of the model to experimental studies with non-monotonic temperature variations leading to particle evaporation. The computational code implementing this numerical method in Python is available upon request.

42 ENGINEERING↗
DOE OSTI2021

Rapid measurement of RH-dependent aerosol hygroscopic growth using a humidity-controlled fast integrated mobility spectrometer (HFIMS)

Abstract. The ability of aerosol particles to uptake water (hygroscopic growth) is an important determinant of aerosol optical properties and radiative effects. Aerosol hygroscopic growth is traditionally measured by humidified tandem differential mobility analyzers (HTDMA), in which size-selected dry particles are exposed to elevated relative humidity (RH), and the size distribution of humidified particles is subsequently measured using a scanning mobility particle sizer. As a scanning mobility particle sizer can measure only one particle size at a time, HTDMA measurements are time consuming, and ambient measurements are often limited to a single RH level. Pinterich et al. (2017b) showed that fast measurements of aerosol hygroscopic growth are possible using a humidity-controlled fast integrated mobility spectrometer (HFIMS). In HFIMS, the size distribution of humidified particles is rapidly captured by a water-based fast integrated mobility spectrometer (WFIMS), leading to a factor of ∼10 increase in measurement time resolution. In this study we present a prototype HFIMS that extends fast hygroscopic growth measurements to a wide range of atmospherically relevant RH values, allowing for more comprehensive characterizations of aerosol hygroscopic growth. A dual-channel humidifier consisting of two humidity conditioners in parallel is employed such that aerosol RH can be quickly stepped among different RH levels by sampling from alternating conditioners. The measurement sequence is also optimized to minimize the transition time between different particle sizes. The HFIMS is capable of measuring aerosol hygroscopic growth of six particle diameters under five RH levels ranging from 20 % to 85 % (30 separate measurements) every 25 min. The performance of this HFIMS is characterized and validated using laboratory-generated ammonium sulfate aerosol standards. Measurements of ambient aerosols are shown to demonstrate the capability of HFIMS to capture the rapid evolution of aerosol hygroscopic growth and its dependence on both size and RH.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Kinetic model describing self-limiting CO 2 diffusion in supported amine adsorbents

A reaction–diffusion shrinking core model describing the decay in diffusivity of supported amine sorbents upon CO 2 sorption under both simulated direct air capture and point source capture conditions is described. The decay in CO 2 diffusivity is associated with crosslinking in the aminopolymer samples and general pore blockage in the amino-silane derived samples, which occurs as CO 2 is adsorbed. The model is used to extract four kinetic parameters that govern the CO 2 uptake kinetics and working capacity: an apparent reaction rate constant, an initial effective diffusivity, and two dimensionless decay parameters. Ideally, an initially reaction limited system would allow for direct determination of the intrinsic reaction rate constant; however, sorption experiments suggest mass transfer resistances related to gas mixing, external boundary layers and intraparticle diffusion are present. Reaction rate constants are determined and agree well with theoretical values predicted with the Eyring equation parameterized using density functional theory energies from literature sources. The kinetic performance is expressed as the average effective diffusivity as a function of average conversion, which can be correlated to the dispersion of sorption sites on the support and the morphology of the active sorbent phase. Four supports are impregnated or grafted with amines, SBA-15, single-walled zeolite nanotubes (ZNT), Syloid SiO 2 , and γ-Al 2 O 3 . Due to its pore structure, γ-Al 2 O 3 supported amines can be modeled at the μm scale or at the nm scale, where the shell balance is on the μm-sized macroporous particle aggregate or on the nm-sized amine film on the surface of the Al 2 O 3 nanoparticles, which comprise the spherical particle aggregates. Faster diffusion rates are maintained under 400 ppm rather than 10% CO 2 due to a slower reaction rate giving a slower decay in diffusivity. In conclusion, this work provides a first principles kinetic analysis of CO 2 sorption where previous models are semi-empirical and use arbitrary kinetic parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Simulation of metal nanoparticles growth in methane atmosphere of arc discharge: comparison to experiment

A direct current arc discharge in a methane atmosphere is a scalable and sustainable method to produce metal-carbon core–shell nanoparticles and single-walled carbon nanotubes, where a metal catalyst can be continuously supplied through evaporation of an anode made from the catalyst material. The size of catalyst particles is of critical importance as it can affect the synthesis yield and properties of nanotubes and core–shell nanoparticles. This study presents a numerical model describing the formation and growth of metal particles for the conditions representative of the arc discharge with an evaporating iron anode at near-atmospheric pressure of a methane-rich atmosphere. The model incorporates carbon adsorption to the metal surface and explains the limiting effect of carbon coverage on the size of metal nanoparticles. The predicted particle sizes are compared with experimental observations. The model also predicts higher concentrations of metal particles with the increasing partial pressure of methane.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

New Particle Formation and Growth Dynamics for α-Pinene Ozonolysis in a Smog Chamber and Implications for Ambient Environments

Secondary organic aerosol (SOA) plays an important role in the Earth’s energy balance and air quality. Understanding the formation of SOA accompanying the oxidation of volatile organic compounds (VOCs) remains incomplete because of the complex reactions and partitioning mechanisms. In this study, we investigated new particle formation (NPF) of SOA derived from α-pinene ozonolysis in the Harvard Environmental Chamber using the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) with the condensing species as two products, one of lower volatility (LVOC, 0.01 μg m –3 ) and one of higher volatility (SVOC, 1.0 μg m –3 ). A module for the classical nucleation theory was included. The surface tension (σ), bulk diffusivity (D b ), and mass accommodation coefficient (α) were varied until convergence between the simulated and observed particle number size distributions. α of LVOC was constrained as 0.03–0.1 with the reported σ of α-pinene-ozonolysis-derived SOA and Tolman surface correction (~23.0–27.5 mN m –1 ) and Db from 10 –15.5 to >10 –11 cm 2 s –1 . The observed particle number size distribution of α-pinene ozonolysis was well-simulated to derive the physical parameters, including σ, Db, and α, suggesting the possible application to group the reported complex oxidation products and further application for other atmospheric-related oxidations for quantifying NPF.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Experimental Set-up for the Study of Chemical Fractionation and Aerosol Dynamics

Experimental investigations of chemical fractionation/phase partition and aerosol dynamics in high-temperature environment were reviewed and discussed. Particle composition and size distribution are the key data for aerosol dynamics predictive model and simulation. However, there were no particle size distribution available from the previous works. Nucleation, condensation, and coagulation are three key physical processes driving the fractionation or phase partition thereby the aerosol dynamics. A new approach was proposed to experimentally observe fractionation/phase partition and provide data for validating the predictive model for aerosol dynamics in the simulation of bomb debris formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Filtration Performance of Layering Masks and Face Coverings and the Reusability of Cotton Masks after Repeated Washing and Drying

In this study, filtration efficiency of different respirators, face masks, and a 2-ply cotton handkerchief bandana was compared for particles in the size range of 60 nm-4 um under a "perfect fit" condition. The filtration efficiency at the most penetrating particle size of 0.3 um on average ranged from 83-99% for N95 and KN95 respirators, 42-88% for surgical masks, 16-23% for cloth masks, and 9% for bandana. We also investigated the effects of using double surgical masks or layering a cloth mask over various surgical masks in terms of their filtration characteristics. In most of these combinations, the filtration efficiency improved by ~25% for particles 0.3-1 um in diameter without any substantial change in the filter quality factor when compared to the highest of the individual mask results. To investigate the reusability of cotton cloth masks, 2-layer cotton fabric sample coupons were machine washed and dried for 52 cycles leading to an increase in inhalation resistance (~20 Pa) without affecting size-resolved filtration efficiency. Scanning electron microscopy revealed that washing and drying led to the gradual deconstruction of cotton fibers at the scale of several micrometers to hundreds of nanometers in the form of delamination of the fiber wall and fibrillation of the nanofiber constituents. Results indicate that cloth masks may be layered over surgical masks for additional benefits, and that cloth masks made out of cotton fabric can be washed and reused numerous times without a significant loss in filtration efficiency.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Super‐Droplet Method to Simulate Lagrangian Microphysics of Nuclear Fallout in a Homogeneous Cloud

Abstract Nuclear detonations produce hazardous local and global particles or fallout. Predicting fallout size, chemical components, and location is necessary to inform officials and determine immediate guidance for the public. However, existing nuclear detonation fallout models prescribe the particle size distributions based on limited observations. In this work, we apply the super‐droplet method, which is a numerical modeling technique developed for cloud microphysics, to simulate size distributions of particles in a mushroom cloud formed post‐detonation of a nuclear device. We model fallout formation and evolution with homogeneous nucleation and condensation of a single species and a Monte Carlo coagulation algorithm. We verify the numerical methods representing coagulation and condensation processes against analytical test problems. Additionally, we explore several scenarios for the integral system mass and yield in equivalent kilotons (kt) of TNT (trinitrotoluene). The fallout size distribution median diameter d pg follows a scaling law based on the integral system mass m v 0 kg and yield Y kt: nm. We test the effect of cloud turbulence, enhanced nucleation and growth, and vapor volatility with a sensitivity study. The range in median diameter predictions for simulations of historical tests performed over the Pacific encompass the measurements of particles sampled from the cloud caps. Predicted median particle size ranges up to 217, 123, 86, and 35 nm for historical tests with yields of 0.2, 0.7, 2, and 10 Mt, respectively. This work can be expanded in many different directions to build a more predictive model for fallout formation.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Computational Methods for Multi-Physics Simulation of Melting in Steelmaking

Iron and steel production accounts for approximately 8% of global carbon dioxide (CO) emissions. Pathways to decarbonize include replacing fossil fuels in iron ore reduction and electrifying other steelmaking processes. Iron pellets produced by hydrogen, called Hydrogen Direct Reduced Iron (HDRI), have property differences from those produced using conventional DRI processes. These differences may impact melting in electric arc furnaces (EAF) and other downstream processes. The physical properties of iron pellets vary significantly with temperature during heating, complicating predictions of their behavior. In this project, we seek to develop an integrated simulation, including the fluid flow and convective thermal transport around the pellet particle. We also examine conduction and phase changes within the particle as they impact the melting process. We use adaptive mesh refinement (AMR) to resolve both the changing size of the particle and the complex physics of the interaction between the pellet and the surrounding fluid. We base our simulations on the AMReX-incflo module, which allows large-scale Navier-Stokes simulation while resolving the changing particle size during melting. As we advance our numerical tools, we anticipate an improved understanding of the dynamics of HDRI melting, which will, in turn, accelerate the adoption of low-carbon technologies in the steelmaking industry.

AMReX↗
DOE OSTI2025

Tuning transition metal nanoparticles on a non-traditional support via experimental design

The ability to control metal nanoparticle size and morphology on supported catalysts is crucial for optimizing catalytic performance in targeted applications. Here, this work presents a systematic approach for tuning Ni particle and crystallite size on an unconventional, low-porosity silica fume support through select thermal treatments. The catalyst was synthesized via the deposition of nickelocene onto silica fume, resulting in well-dispersed Ni nanoparticles. A face-centered central composite design was employed to systematically assess the effects of time, temperature, and sintering gas environment on metal particle growth. The results demonstrate that the sintering gas environment is the primary factor governing particle and crystallite evolution, with temperature as the next most significant influence. Nickel nanoparticles sintered at temperatures of 650 °C and above under inert conditions exhibited substantial growth and polycrystalline structures, whereas samples treated in oxidative environments formed NiO, restricting particle mobility. Minimally oxidative (500 ppm O₂) environments facilitated rapid sintering while effectively removing residual ligands from the one-step nickelocene deposition process. Extensive structural characterization via a combination of scanning transmission electron microscopy, X-ray diffraction, hydrogen temperature programmed reduction, and small-angle X-ray scattering revealed that oxidative treatments enhanced metal-support interactions, as evidenced by increased reduction temperatures and narrower particle size distributions. These findings establish quantitative relationships between sintering parameters and Ni nanoparticle characteristics, providing a framework for rational catalyst design through controlled thermal treatments. This methodology is broadly applicable to other catalytic systems and provides a quantitative foundation for catalyst design.

CVD↗
DOE OSTI2023

SootLib: A soot model library for combustion simulation

Soot formation in combustion is an important process that affects radiative heat transfer, flame temperatures, and emissions with health and environmental impacts. Soot formation involves complex chemistry for nucleation, growth, oxidation, and coagulation processes. The soot particles vary widely in size and accurate modeling requires representation of the particle size distribution (PSD). Modeling soot is not trivial, and is only one of several physical processes active in combustion systems. This paper presents a software package called SootLib, which is an open-source library for modeling soot formation and other aerosol systems. SootLib is written in C++, is documented with Doxygen, and is available on GitHub. The library includes several models for soot chemistry and coagulation, and it represents the PSD using either a sectional model or the method of moments (MOM). Four closure approaches for the MOM are implemented allowing up to eight moments: monodispersed, an assumed-shape lognormal distribution, the quadrature method of moments, and the method of moments with interpolative closure. SootLib provides an interface for inclusion in other combustion packages including CFD or reacting flow solvers. The range of models allows comparisons and sensitivity studies, and the modularity facilitates extension to other soot models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Development of A Microsampler for Aerial Platform on Collection of Aerosol Particles

A microsampler for aerosol particles was designed and evaluated in the laboratory for dry (no condensed water) and wet (foggy, misty, or rainy) air conditions. Computational Fluid Dynamics (CFD) results suggested a design that provided a higher sampling efficiency with minimal inlet loss. The microsampler was experimentally evaluated using fluorescent Polystyrene Latex (PSL) particles at four nominal sizes. The experimental results at the four PSL particle sizes agree reasonably well with the collection efficiencies predicted by CFD. We found no impacts on the collection efficiency of the microsampler at conditions under 80% Relative Humidity (RH). However, when condensed water exists, significant biases on the collection efficiencies were found suggesting this microsampler should not be used in the condition where there was condensed water in the atmosphere, e.g., foggy, misty, and rainy conditions.

54 ENVIRONMENTAL SCIENCES↗