Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Structure and magnetism of low-doped monoclinic crystals of (Ga{sub 1-x}Mn{sub x}){sub 2}Se{sub 3}

The influence that doping with Mn{sup 3+} ions has on the fine crystal structure of the monoclinic compound Ga{sub 2}Se{sub 3} was studied by single-crystal neutron diffraction and the measurements of magnetic properties. It was found that the structural state of the crystals changes even at relatively low doping levels (x = 0.04). Local Jahn-Teller distortions were shown to be responsible for the formation of the fine structure and magnetism in this type of compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temporally continuous thermofluidic–thermomechanical modeling framework for metal additive manufacturing

Additive manufacturing (AM) is known to generate large magnitudes of residual stresses (RS) within builds due to steep and localized thermal gradients. In the current state of commercial AM technology, manufacturers generally perform heat treatments in effort to reduce the generated RS and its detrimental effects on part distortion and in-service failure. Computational models that effectively simulate the deposition process can provide valuable insights to improve RS distributions. Accordingly, it is common to employ Computational fluid dynamics (CFD) models or finite element (FE) models. While CFD can predict geometric and thermal-fluid behavior, it cannot predict the structural response (e.g., stress–strain) behavior. On the other hand, an FE model can predict mechanical behavior, but it lacks the ability to predict geometric and fluid behavior. Thus, an effectively integrated thermofluidic–thermomechanical modeling framework that exploits the benefits of both techniques while avoiding their respective limitations can offer valuable predictive capability for AM processes. In contrast to previously published efforts, the work herein describes a one-way coupled CFD-FEA framework that abandons major simplifying assumptions, such as geometric steady-state conditions, the absence of material plasticity, and the lack of detailed RS evolution/accumulation during deposition, as well as insufficient validation of results. Here, the presented framework is demonstrated for a directed energy deposition (DED) process, and experiments are performed to validate the predicted geometry and RS profile. Both single- and double-layer stainless steel 316L builds are considered. Geometric data is acquired via 3D optical surface scans and X-ray micro-computed tomography, and residual stress is measured using neutron diffraction (ND). Comparisons between the simulations and measurements reveal that the described CFD-FEA framework is effective in capturing the coupled thermomechanical and thermofluidic behaviors of the DED process. The methodology presented is extensible to other metal AM processes, including power bed fusion and wire-feed-based AM.

42 ENGINEERING↗

Quantum Coherence and Random Fields at Mesoscopic Scales

We seek to explore and exploit model, disordered and geometrically frustrated magnets where coherent spin clusters stably detach themselves from their surroundings, leading to extreme sensitivity to finite frequency excitations and the ability to encode information. Global changes in either the spin concentration or the quantum tunneling probability via the application of an external magnetic field can tune the relative weights of quantum entanglement and random field effects on the mesoscopic scale. These same parameters can be harnessed to manipulate domain wall dynamics in the ferromagnetic state, with technological possibilities for magnetic information storage. Finally, extensions from quantum ferromagnets to antiferromagnets promise new insights into the physics of quantum fluctuations and effective dimensional reduction. A combination of ac susceptometry, dc magnetometry, noise measurements, hole burning, non-linear Fano experiments, and neutron diffraction as functions of temperature, magnetic field, frequency, excitation amplitude, dipole concentration, and disorder address issues of stability, overlap, coherence, and control. We have been especially interested in probing the evolution of the local order in the progression from spin liquid to spin glass to long-range-ordered magnet.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron study and modeling of the lattice parameters in a NiAl-precipitate strengthened ferritic steel

The lattice misfit between the body-centered cubic {alpha}-Fe matrix and the B2-ordered NiAl-type {beta}{prime} precipitates is a parameter of significant importance in controlling the creep resistance of precipitate-strengthened ferritic steels. However, the measurement of the lattice misfit is complicated due to the fact that the fundamental reflections of {alpha} and {beta}{prime} phases almost completely overlap. In this study, neutron diffraction is used to determine the lattice parameters of these two phases in a Fe-18.9 Al-9.8 Cr-13 Ni-1.8 Mo (atomic percent, at.%) alloy as a function of temperature. The accuracy of the measurement at room temperature is verified by high-energy synchrotron X-ray diffraction. The comparison between these two techniques is discussed in terms of the difference in superlattice intensity. Furthermore, using the phase compositions determined by atom probe tomography, models are proposed to predict the lattice parameters of both phases at room temperature as a function of their compositions. The results are in very good agreement with those obtained experimentally.

36 MATERIALS SCIENCE↗

Phase and valence transitions in Ba{sub 2}LnSn{sub x}Nb{sub 1-x}O{sub 6-{delta}}

The structures of compounds in the perovskite series Ba{sub 2}LnSn{sub x}Nb{sub 1-x}O{sub 6-{delta}} (Ln=Pr and Tb and x=0, 0.1, 0.2, ..., 1.0) have been examined using synchrotron X-ray and neutron diffraction. It was found that niobate members of both series feature full B-site cation ordering but that this order is lost with increasing x. X-ray absorption near-edge structure (XANES) and near-infrared spectroscopies indicate that the oxidation state of the lanthanide cations gradually changes from Ln{sup 3+} to Ln{sup 4+} with increased Sn{sup 4+} doping. This is believed to be the cause of the loss of B-site ordering. Least squares analysis of the XANES spectra suggests that the rate of the transformation of Ln{sup 3+} cations to the tetravalent state is such that the Pr series contains no oxygen vacancies while the Tb series may contain a very small amount of vacancies, with {delta}{approx}0.02. - Graphical abstract: The series Ba{sub 2}LnSn{sub x}Nb{sub 1-x}O{sub 6-{delta}} (Ln=Pr and Tb) has been investigated using powder diffraction and spectroscopic techniques. Similarly to the analogous Sb{sup 5+} containing compounds it was found that Sn{sup 4+} doping leads to the gradual oxidation of the Ln{sup 3+} cations to the Ln{sup 4+} state. Quantitative analysis of the Ln L{sub III}-edge absorption spectra indicates that few or no oxygen vacancies are present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin canting and lattice symmetry in La 2 CuO 4

While the dominant magnetic interaction in La 2 CuO 4 is superexchange between nearest-neighbor Cu moments, the pinning of the spin direction depends on weak anisotropic effects associated with spin-orbit coupling. The symmetry of the octahedral tilt pattern allows an out-of-plane canting of the Cu spins, which is compensated by an opposite canting in nearest-neighbor layers. A strong magnetic field applied perpendicular to the planes can alter the spin canting pattern to induce a weak ferromagnetic phase. In light of recent evidence that the lattice symmetry is lower than originally assumed, we take another look at the nature of the field-induced spin-rotation transition. Comparing low-temperature neutron diffraction intensities for several magnetic Bragg peaks measured in fields of 0 and 14 T, we find that a better fit is provided by a model in which spins rotate within both neighboring planes but by different amounts, resulting in a noncollinear configuration. Finally, this model allows a more consistent relationship between lattice symmetry and spin orientation at all Cu sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-dimensional antiferromagnetic correlations in an La{sub 1.4}Sr{sub 1.6}(Mn{sub 0.9}Co{sub 0.1}){sub 2}O{sub 7} single crystal

The temperature and field dependences of the magnetization, the electrical resistivity, and the magnetostriction of bilayer lanthanum manganite La{sub 1.4}Sr{sub 1.6}Mn{sub 2}O{sub 7} single crystals and cobalt-doped La{sub 1.4}Sr{sub 1.6}(Mn{sub 0.9}Cu{sub 0.1}){sub 2}O{sub 7} are measured. The magnetostriction of the cobalt-doped compound increases as compared to the initial La{sub 1.4}Sr{sub 1.6}Mn{sub 2}O{sub 7} compound, and the magnetization and the magnetoresistance of the former compound change substantially. Powder and single-crystal neutron diffraction patterns are used to detect ferromagnetic ordering in La{sub 1.4}Sr{sub 1.6}(Mn{sub 0.9}Co{sub 0.1}){sub 2}O{sub 7} at a temperature below T{sub C} ~ 45(2) K, and this ordering coexists with antiferromagnetic correlations, which develop at temperatures below T{sub C} ~ 80(5) K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and magnetic characterization of BiFe{sub x}Mn{sub 2-x}O{sub 5} oxides (x=0.5, 1.0)

The title compounds have been synthesized by a citrate technique followed by thermal treatments in air (BiFe{sub 0.5}Mn{sub 1.5}O{sub 5}) or under high oxygen pressure conditions (BiFeMnO{sub 5}), and characterized by X-ray diffraction (XRD), neutron powder diffraction (NPD) and magnetization measurements. The crystal structures have been refined from NPD data in the space group Pbam at 295 K. These phases are isostructural with RMn{sub 2}O{sub 5} oxides (R=rare earths) and contain infinite chains of Mn{sup 4+}O{sub 6} octahedra sharing edges, linked together by (Fe,Mn){sup 3+}O{sub 5} pyramids and BiO{sub 8} units. These units are strongly distorted with respect to those observed in other RFeMnO{sub 5} compounds, due to the presence of the electronic lone pair on Bi{sup 3+}. It is noteworthy the certain level of antisite disorder exhibited in both samples, where the octahedral positions are partially occupied by Fe cations, and vice versa. BiFe{sub x}Mn{sub 2-x}O{sub 5} (x=0.5, 1.0) are short-range magnetically ordered below 20 K for x=0.5 and at 40 K for x=1.0. The main magnetic interactions seem to be antiferromagnetic (AFM); however, the presence of a small hysteresis in the magnetization cycles indicates the presence of some weak ferromagnetic (FM) interactions. - Graphical Abstract: BiFe{sub x}Mn{sub 2-x}O{sub 5} (x=0.5, 1.0) samples are isostructural with BiMn{sub 2}O{sub 5}, belonging to the Pbam space group. The crystal structure contains infinite chains of edge-sharing Mn{sup 4+}O{sub 6} octahedra, interconnected by dimer units of Fe{sup 3+}O{sub 5} square pyramids. These units are strongly distorted due to the presence of the electronic lone pair on Bi{sup 3+}. They are magnetically ordered at low temperatures. The main magnetic interactions seem to be antiferromagnetic with the presence of some weak ferromagnetic response. Highlights: > Two new compounds of formula BiFe{sub x}Mn{sub 2-x}O{sub 5} (x=0.5, 1.0) have been obtained. > Their crystallographic structure is isotypical with that of RMn{sub 2}O{sub 5} materials. > The presence of the electronic lone pair on Bi{sup 3+} severely distorts the crystal structure. > There is no establishment of a long-range ferrimagnetic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The local ordering of polar solvents around crystalline carbon nitride nanosheets in solution

The crystalline graphitic carbon nitride, poly-triazine imide (PTI) is highly unusual among layered materials since it is spontaneously soluble in aprotic, polar solvents including dimethylformamide (DMF). The PTI material consists of layers of carbon nitride intercalated with LiBr. When dissolved, the resulting solutions consist of dissolved, luminescent single to multilayer nanosheets of around 60–125 nm in diameter and Li+ and Br- ions originating from the intercalating salt. To understand this unique solubility, the structure of these solutions has been investigated by high-energy X-ray and neutron diffraction. Although the diffraction patterns are dominated by inter-solvent correlations there are clear differences between the X-ray diffraction data of the PTI solution and the solvent in the 4–6 Å -1 range, with real space differences persisting to at least 10 Å. Structural modelling using both neutron and X-ray datasets as a constraint reveal the formation of distinct, dense solvation shells surrounding the nanoparticles with a layer of Br - close to the PTI-solvent interface. This solvent ordering provides a configuration that is energetically favourable underpinning thermodynamically driven PTI dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility

A single phase, face-centered-cubic (FCC) Al 0.3 CoCrFeNi high entropy alloy usually has low yield strength. Here, a precipitate-strengthened Al 0.3 CoCrFeNi has been developed, exhibiting enhanced yield strength while retaining good ductility, which is attributed to a novel microstructure comprising a finely distributed, needle-like B2 phase within the grains of the FCC matrix and a granular σ phase along the grain boundaries. Such a microstructure was obtained by a two-step heat treatment of an as-cast Al 0.3 CoCrFeNi, whose parameters were determined by integrating CALPHAD-based thermodynamic calculations with microstructural characterization by atom probe tomography. In situ neutron diffraction, in conjunction with crystal-plasticity finite-element simulations, has revealed the strengthening effect owing to the load partitioning between the constituent phases. Here, this work has important implications for understanding phase stability and deformation mechanisms in multi-principal component alloys, and paves the way for developing novel microstructures in complex alloys using correlative techniques.

36 MATERIALS SCIENCE↗

Closely related magnetic and dielectric transitions in the “114” magnetoelectric Zn-doped CaBaCo{sub 4}O{sub 7}

We report on the impact of zinc doping upon the magneto-electric properties of CaBaCo{sub 4}O{sub 7}.We show that the presence of less than 1% Zn at the Co sites decreases T{sub C} from 64 K to 48 K and generates two magnetic transitions, concomitant with changes of slope of dielectric permittivity, at 54 K and 77 K, respectively. Powder neutron diffraction and magnetic data show the existence of an incommensurate magnetic phase and a spin-flop transition in this temperature range. The crossover of the magnetodielectric effect of this oxide, from positive below 50 K to negative above this temperature emphasizes the primordial role of the incommensurate magnetic phase in the evolution of these properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cation-containing lipid membranes – experiment and md simulations

Here, using small angle neutron diffraction and molecular dynamics simulations we studied the interactions between calcium (Ca 2+ ) or zinc (Zn 2+ ) cations, and oriented gel phase dipalmitoyl-phosphatidylcholine (DPPC) bilayers. For both cations studied at ~1:7 divalent metal ion to lipid molar ratio (Me2+:DPPC), bilayer thickness increased. Simulation results helped reveal subtle differences in the effects of the two cations on gel phase membranes.

59 BASIC BIOLOGICAL SCIENCES↗

Crystal growth, microstructure, and physical properties of SrMnSb 2

We report on the crystal and magnetic structures, magnetic, and transport properties of SrMnSb 2 single crystals grown by the self-flux method. Magnetic susceptibility measurements reveal an antiferromagnetic (AFM) transition at T N = 295(3) K. Above T N , the susceptibility slightly increases and forms a broad peak at T ~ 420 K, which is a typical feature of two-dimensional magnetic systems. Neutron diffraction measurements on single crystals confirm the previously reported C-type AFM structure below T N . Both de Haas-van Alphen (dHvA) and Shubnikov-de Haas (SdH) effects are observed in SrMnSb2 single crystals. Analysis of the oscillatory component by a Fourier transform shows that the prominent frequencies obtained by the two different techniques are practically the same within error regardless of sample size or saturated magnetic moment. Transmission electron microscopy (TEM) reveals the existence of stacking faults in the crystals, which result from a horizontal shift of Sb atomic layers suggesting possible ordering of Sb vacancies in the crystals. Increase of temperature in susceptibility measurements leads to the formation of a strong peak at T ~ 570 K that upon cooling under magnetic field the susceptibility shows a ferromagnetic transition at T C ~ 580 K. Neutron powder diffraction on crushed single-crystals does not support an FM phase above T N . Furthermore, X-ray magnetic circular dichroism (XMCD) measurements of a single crystal at the L 2,3 edge of Mn shows a signal due to induced canting of AFM moments by the applied magnetic field. All evidence strongly suggests that a chemical transformation at the surface of single crystals occurs above 500 K concurrently producing a minute amount of ferromagnetic impurity phase.

36 MATERIALS SCIENCE↗

Pressure and Temperature effects on the High Pressure Phase Transformation in Zirconium

At high pressure zirconium is known to undergo a phase transformation from the hexagonal close packed (HCP) alpha phase ({alpha}) to the simple hexagonal omega phase ({omega}). Under conditions of shock loading, the high-pressure omega phase is retained upon release. However, the hysteresis in this transformation is not well represented by equilibrium phase diagrams. For this reason, the influence of peak shock pressure and temperature on the retention of omega phase in Zr is explored in this study. In situ VISAR measurements along with post-mortem metallographic and neutron diffraction characterization of soft recovered specimens have been utilized to quantify the volume fraction of retained omega phase, morphology of the shocked alpha and omega phases, and qualitatively understand the kinetics of this transformation. This understanding of the role of peak shock stress will be utilized to address physics to be encoded in our present macro-scale models.

36 MATERIALS SCIENCE↗

Shock Compression and Strain Rate Effect in Composites and Polymers

Polymers are increasingly being utilized as monolithic materials and composite matrices for structural applications historically reserved for metals. High strain and high strain-rate applications in aerospace, defense, and automotive industries have lead to interest in utilizing the ability of many polymers to withstand extensions to failure of several hundred percent, often without localization or necking and their strong rate dependence. A broad range of characterization techniques will be presented for semi-crystalline polymers and composites including elastic-plastic fracture, split Hopkinson pressure bar (SHPB), plate impact including soft-recovery and lateral gage measurements and Taylor Impact. Gas-launched, plate impact experiments have been performed on pedigreed PTFE 7C, mounted in momentum-trapped, shock assemblies, with impact pressures above and below the phase II to phase III crystalline transition to probe subtle changes in the crystallinity, microstructure, and mechanical response of PTFE. Observed strong anisotropy on the hugoniot and spall behavior of fiber-reinforced composites will be discussed. Polymers are known to exhibit a strong dependence of the yield stress on temperature and strain-rate that are often observed to be linear for temperature and logarithmic for strain-rate. Temperature and strain-rate dependence will be reviewed in terms of classic time-temperature superposition and an empirical mapping function for superposition between temperature and strain-rate. The recent extension of the new Dynamic-Tensile-Extrusion (Dyn-Ten-Ext) technique to probe the dynamic tensile responses of polymers will be discussed, where more irregular deformation and stochastic-based damage and failure mechanisms than the stable plastic elongation and shear instabilities observed that in metals. The opportunity to use of Dyn-Ten-Ext to probe incipient damage at very high strain-rate by linking in situ and post mortem experimental observations with high-fidelity simulation will be introduced. The potential to study polymer deformation under even more extreme conditions by employing explosive drive to induce Rayleigh-Taylor (RT) growth linking with in situ diagnosis by proton radiography will be proposed. Finally, a case study of collaboration between experimentalists and modelers to study the shock induced phase transition of PTFE presented. Building on a history of shock and Diamond Anvil Cell data it has long been know that PTFE exhibits a pressure induced phase transition at 0.7 GPa. The transition has historically been assumed and reported to be dependent on the hydrostatic pressure. However, studies employing neutron diffraction have suggested the phase transition is driven by only the principle stress applied to the compliant direction of crystalline domain. A multiphase model based on the Maxwell-type viscoelastic formulation was developed to include the stress deviator to drive potential martensitic transition and time to reflects the kinetic nature of the transitions demonstrating the need to account for both a martensitic nature and kinetics of the transition to capture subtle experimental observables.

36 MATERIALS SCIENCE↗

X-ray studies of dynamic aging in an aluminum alloy subjected to severe plastic deformation

In this work, X-ray scattering methods were applied for a quantitative characterization of the microstructure of an aluminum alloy of the Al–Mg–Si system during dynamic aging realized through the high pressure torsion technique. A qualitative and quantitative phase analysis of the alloy was performed, together with Al alloy lattice parameter determination. From the reflections broadening the effective size of the coherent scattering domains and the lattice microstrain were determined in the framework of the Halder–Wagner approach. Using the method of small-angle X-ray scattering, the quantitative characteristics of the size, shape and spatial distribution of the secondary phase particles formed in the Al alloy during dynamic aging were established. In order to validate the obtained results, the method of small-angle X-ray scattering was preliminarily tested on similar samples after artificial aging and compared with the results from small-angle neutron diffraction widely known in literature. - Highlights: • Spherical fcc β-Mg2Si precipitates formed in Al 6201 alloy during dynamic aging in the course of severe plastic deformation. • The size, shape and distribution of the precipitates due to artificial and dynamic aging were revealed by SAXS method. • Monoclinic needle-like β' precipitates and Al5FeSi intermetallic phase were detected in 6201 alloy after T6 treatment.

36 MATERIALS SCIENCE↗

Residual stress evaluation of components produced via direct metal laser sintering

Direct metal laser sintering is an additive manufacturing process which is capable of fabricating three-dimensional components using a laser energy source and metal powder particles. Despite the numerous benefits offered by this technology, the process maturity is low with respect to traditional subtractive manufacturing methods. Relationships between key processing parameters and final part properties are generally lacking and require further development. In this study, residual stresses were evaluated as a function of key process variables. The variables evaluated included laser scan strategy and build plate preheat temperature. Residual stresses were measured experimentally via neutron diffraction and computationally via finite element analysis. Good agreement was shown between the experimental and computational results. Results showed variations in the residual stress profile as a function of laser scan strategy. Compressive stresses were dominant along the build height (z) direction, and tensile stresses were dominant in the x and y directions. Build plate preheating was shown to be an effective method for alleviating residual stress due to the reduction in thermal gradient.

36 MATERIALS SCIENCE↗

Helimagnetism in MnBi 2 Se 4 Driven by Spin-Frustrating Interactions Between Antiferromagnetic Chains

We report the magnetic properties and magnetic structure determination for a linear-chain antiferromagnet, MnBi 2 Se 4 . The crystal structure of this material contains chains of edge-sharing MnSe 6 octahedra separated by Bi atoms. The magnetic behavior is dominated by intrachain antiferromagnetic (AFM) interactions, as demonstrated by the negative Weiss constant of –74 K obtained by the Curie–Weiss fit of the paramagnetic susceptibility measured along the easy-axis magnetization direction. The relative shift of adjacent chains by one-half of the chain period causes spin frustration due to interchain AFM coupling, which leads to AFM ordering at TN = 15 K. Neutron diffraction studies reveal that the AFM ordered state exhibits an incommensurate helimagnetic structure with the propagation vector k = (0, 0.356, 0). The Mn moments are arranged perpendicular to the chain propagation direction (the crystallographic b axis), and the turn angle around the helix is 128°. The magnetic properties of MnBi2Se4 are discussed in comparison to other linear-chain antiferromagnets based on ternary mixed-metal halides and chalcogenides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗