Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Impact of microwave-field inhomogeneity in an alkali vapour cell using Ramsey double-resonance spectroscopy

We numerically and experimentally evaluate the impact of the inhomogeneity of the microwave field in the cavity used to perform double-resonance (DR) Ramsey spectroscopy in a buffer gas alkali vapour cell. The Ramsey spectrum is numerically simulated using a simple theoretical model and taking into account the field distribution in a magnetron-type microwave resonator. An experimental evaluation is performed using a DR pulsed optically pumped (POP) atomic clock. It is shown that the sensitivity to the microwave power of the DR POP clock can be reproduced from the combination of two inhomogeneities across the vapour cell: microwave field inhomogeneity and atomic ground-state resonance frequency inhomogeneity. Finally, we present the existence of an optimum operation point for which the microwave power sensitivity of our DR POP clock is reduced by two orders of magnitude. It leads into a long-term frequency stability of 1 × 10{sup −14}. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Rate Sputter Deposition of Ultrathick Boron Carbide Coatings on Rolling Spherical Substrates

Amorphous boron carbide (B 4 C) is a promising next-generation ablator material for inertial confinement fusion. However, the deposition of ultrathick B4C coatings with submicron-scale density uniformity on spherical substrates, as required for ablator shell fabrication, remains challenging. Here, in this study, we use direct current magnetron sputtering to deposit B 4 C onto 2-mm-diameter Si spheres rolling in a dish-shaped substrate holder. High deposition rates of ∼3 μm/h are achieved. Ultrathick films have a columnar microstructure, with the column width determined by the density of nodular defects. Nodular defect nucleation is dominated by the pickup of particulates from the holder during substrate rolling. We demonstrate the fabrication of a hollow B 4 C spherical shell with a wall thickness of 80 μm. Also demonstrated is the laser machining of holes in the B 4 C coating, which is necessary for both the chemical removal of the Si template and the attachment of a fusion fuel fill tube.

Inertial confinement fusion targets↗

Ferrimagnetism and disorder of epitaxial Mn2-xCoxVAl Heusler compound thin films

The quaternary full Heusler compound Mn{sub 2-x}Co{sub x}VAl with x = 1 is predicted to be a half-metallic antiferromagnet. Thin films of the quaternary compounds with x = 0-2 were prepared by dc and RF magnetron co-sputtering on heated MgO (0 0 1) substrates. The magnetic structure was examined by x-ray magnetic circular dichroism and the chemical disorder was characterized by x-ray diffraction. Ferrimagnetic coupling of V to Mn was observed for Mn{sub 2}VAl (x = 0). For x = 0.5, we also found ferrimagnetic order with V and Co antiparallel to Mn. The observed reduced magnetic moments are interpreted with the help of band structure calculations in the coherent potential approximation. Mn{sub 2}VAl is very sensitive to disorder involving Mn, because nearest-neighbour Mn atoms couple antiferromagnetically. Co{sub 2}VAl has B2 order and has reduced magnetization. In the cases with x {ge} 0.9 conventional ferromagnetism was observed, closely related to the atomic disorder in these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-temperature vapour-liquid-solid (VLS) growth of vertically aligned silicon oxide nanowires using concurrent ion bombardment.

Vertically aligned silicon oxide nanowires can be synthesized over a large area by a low-temperature, ion-enhanced, reactive vapour-liquid-solid (VLS) method. Synthesis of these randomly ordered arrays begins with a thin indium film deposited on a Si or SiO{sub 2} surface. At the processing temperature of 190 C, the indium film becomes a self-organized seed layer of molten droplets, receiving atomic silicon from a DC magnetron sputtering source rather than from the gaseous precursors used in conventional VLS growth. Simultaneous vigorous ion bombardment aligns the objects vertically and expedites mixing of oxygen and silicon into the indium. Silicon oxide precipitates from each droplet in the form of multiple thin strands having diameters as small as 5 nm. These strands form a single loose bundle growing normal to the surface, eventually consolidating to form one nanowire. The vertical rate of growth can reach 300 nm min{sup -1} in an environment containing argon, hydrogen, and traces of water vapour. This paper discusses the physical and chemical factors leading to the formation of the nanostructures. It also demonstrates how the shape of the resulting nanostructures can be further controlled by sputtering, during both VLS growth and post-VLS processing. Key technological advantages of the developed process are nanowire growth at low substrate temperatures and the ability to form aligned nanostructure arrays, without the use of lithography or templates, on any substrate onto which a thin silicon film can be deposited.

08 HYDROGEN↗

Sputtered Au–Ta films with tunable electrical resistivity

Gold–tantalum alloy films are attractive for hohlraums used in indirect drive magnetized inertial confinement fusion. A high electrical resistivity of over ~100 µΩ cm at cryogenic temperatures is an essential requirement for allowing an externally imposed pulsed magnetic field to soak through a hohlraum and magnetize the fusion fuel. In this work, we systematically study properties of Au–Ta alloy films in the entire compositional range from pure Au to pure Ta with thicknesses up to 30 µm. These films are made by direct current magnetron co-sputtering on planar substrates. Films are characterized by a combination of high-energy ion scattering, x-ray diffraction, electron microscopy, nanoindentation, and electrical transport measurements. Results show that an alloy with ~80 at.% of Ta forms a metallic glass exhibiting a maximum electrical resistivity of ~300 µΩ cm with a weak temperature dependence in the range of 5–400 K. The deposition of a film with ~80 at.% of Ta onto a sphero-cylindrical substrate for hohlraum fabrication is also demonstrated.

36 MATERIALS SCIENCE↗

Combinatorial sputter deposition of ultrathick Au-Bi alloy films

We report gold-bismuth alloys are of interest as catalysts and catalytic sensing systems, electrochemical sensors, superconductors, and hohlraums for magnetically assisted inertial confinement fusion implosions. Radiation-hydrodynamics simulations with the Lasnex code of laser-driven hohlraums predict higher x-ray drive from Au-Bi alloys compared with cases of Au-Ta or pure Au and Bi hohlraums. Here, we use direct current magnetron sputtering in Ar gas, with co-sputtering from two elemental targets, to deposit Au-Bi alloys with Bi content of 9–77 at.% and thicknesses up to ~20 µm. Films are characterized by a combination of x-ray diffraction, Rutherford backscattering, scanning electron microscopy, substrate-curvature-based residual stress, and electronic transport measurements. Experiments are complemented by Monte Carlo simulations of ballistic sputtering and gas phase transport of depositing species and Ar gas atoms. Results show that all films are polycrystalline, with three distinct compositional regimes dominated by Au, Au 2 Bi, and Bi crystallographic phases. A metallic behavior of the temperature dependence of electrical resistivity is observed for all the films. Films with Bi content above ~30 at.% exhibit porosity, which is tolerable to hohlraum x-ray drive based on Lasnex simulations.

36 MATERIALS SCIENCE↗

Electronic structure of LiCoO{sub 2} thin films: A combined photoemission spectroscopy and density functional theory study

The electronic properties of LiCoO{sub 2} have been studied by theoretical band-structure calculations (using density functional theory) and experimental methods (photoemission). Synchrotron-induced photoelectron spectroscopy, resonant photoemission spectroscopy (ResPES), and soft x-ray absorption (XAS) have been applied to investigate the electronic structure of both occupied and unoccupied states. High-quality PES spectra were obtained from stoichiometric and highly crystalline LiCoO{sub 2} thin films deposited ''in situ'' by rf magnetron sputtering. An experimental approach of separating oxygen- and cobalt-derived (final) states by ResPES in the valence-band region is presented. The procedure takes advantage of an antiresonant behavior of cobalt-derived states at the 3p-3d excitation threshold. Information about the unoccupied density of states has been obtained by O K XAS. The structure of the Co L absorption edge is compared to semiempirical charge-transfer multiplet calculations. The experimental results are furthermore compared with band-structure calculations considering three different exchange potentials [generalized gradient approximation (GGA), using a nonlocal Hubbard U (GGA+U) and using a hybrid functional (Becke, three-parameter, Lee-Yang-Parr [B3LYP])]. For these different approaches total density of states and partial valence-band density of states have been investigated. The best qualitative agreement with experimental results has been obtained by using a GGA+U functional with U=2.9 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of fully epitaxial Co{sub 2}TiSn thin films

We report on the properties of thin films of the full Heusler compound Co{sub 2}TiSn prepared by dc magnetron co-sputtering. Fully epitaxial, stoichiometric films were obtained by deposition on MgO (001) substrates at substrate temperatures above 600 C. The films are well ordered in the L2{sub 1} structure, and the Curie temperature slightly exceeds the bulk value. They show a significant, isotropic magnetoresistance and the resistivity becomes strongly anomalous in the paramagnetic state. The films are weakly ferrimagnetic, with nearly 1 {mu}{sub B} on the Co atoms, and a small antiparallel Ti moment, in agreement with theoretical expectations. From comparison of x-ray absorption spectra on the Co L{sub 3,2} edges, including circular and linear magnetic dichroism, with ab initio calculations of the x-ray absorption and circular dichroism spectra we infer that the electronic structure of Co{sub 2}TiSn has essentially nonlocalized character. Spectral features that have not been explained in detail before are explained here in terms of the final-state band structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-Sputtering Far above the Runaway Threshold: An Extraordinary Metal-Ion Generator

When self-sputtering is driven far above the runaway threshold voltage, energetic electrons are made available to produce 'excess plasma' far from the magnetron target. Ionization balance considerations show that the secondary electrons deliver the necessary energy to the 'remote' zone. Thereby, such a system can be an extraordinarily prolific generator of usable metal ions. Contrary to other known sources, the ion current to a substrate can exceed the discharge current. For gasless self-sputtering of copper, the usable ion current scales exponentially with the discharge voltage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-Excitation and Feedback Cooling of an Isolated Proton

The first one-proton self-excited oscillator (SEO) and one-proton feedback cooling are demonstrated. In a Penning trap with a large magnetic gradient, the SEO frequency is resolved to the high precision needed to detect a one-proton spin flip. This is after undamped magnetron motion is sideband cooled to a 14 mK theoretical limit, and despite random frequency shifts (typically larger than those from a spin flip) that take place every time sideband cooling is applied. The observations open a possible path towards a million-fold improved comparison of the p and p magnetic moments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Surface studies and measurement of pumping characteristic of NEG coating (Ti-V-Zr)

NEGs (non evaporable getters) when coated as thin film on the inner wall of vacuum pipes or chamber play vital role in the evacuation of a sealed off system after heating it to activation temperature. It creates the uniformity of pressure between two long pipes where pumping is not possible at each and every part. Ternary coating of materials Ti, Zr and V has prepared on SS304L by DC-magnetron sputtering technique. These coatings was claimed to be very good in H{sub 2} adsorption which lead to achieve very low pressures of the order of 10{sup -12}-10{sup -13} mbar, low SEY(Secondary Electron Yield) and Low photo desorption yield compared to bare SS surface. We have shown the morphology of surfaces of these coatings which play the principal role in adsorption of (H{sub 2},CO,CO{sub 2}, H{sub 2}O etc.) have been extensively studied by SEM/EDX technique. SEM showed the micron size thick film. Film thickness of micron level is useful for NEG to work for no. of atmospheric exposed cycles. Reduction of superficial surface oxide after heating it to different temperatures was main concern and studied by X-ray Photoelectron spectroscopic technique. It has also reported the pumping characteristic of the NEG coating. (author)

43 PARTICLE ACCELERATORS↗

Design and development of line type modulators for high impedance electron gun

Conventional line type modulators are routinely used for powering pulsed power microwave devices such as magnetrons and klystrons used for radar, medical and scientific applications. The load impedance (operating point) is fairly well defined in these cases, and makes the design of the discharging circuit of the modulator straight forward. This paper describes the Line type modulators that have been developed and being routinely used for powering the Triode Electron Gun of industrial electron linacs. The beam parameters of such guns are user defined and the pulse current varies from few mA to 800mA (typ). The beam energies requirement varies from 40 keV to 80 keV. Hence the impedance offered by the electron gun to the power source (modulator) is not well defined. The load capacitance which is inclusive of the various stray capacitances along with the intrinsic gun capacitance is ∼ 200-400 pF. This capacitance, which depends on the configuration, shunts the load and makes the effective load highly capacitive with the resistive part varying over a wide range. The paper describes the design and development of conventional line type modulators for powering Electron gun load of the type described above. (author)

43 PARTICLE ACCELERATORS↗

XPS Investigation of Surface Secondary Phase Segregation in CIGS Thin Film

Cu(In, Ga)Se{sub 2} (CIGS) thin films were deposited on Molybdenum (Mo) coated soda lime glass (SLG/Mo) substrates, using physical vapor deposition (PVD) 3-stage process. The Mo thin films were sputtered on SLG substrates using DC planar magnetron sputtering at a working gas (Ar) pressure that varies from 0.8 mT to 12 mT with a sputtering power density of 1.2 W/cm{sub 2}. The sputtering pressure of Mo thin films was varied in order to induce variations in the sputtered films morphology and porosity; as well as to subsequently induce variations in the Na out-diffusion from SLG substrate. The surface chemistry of CIGS thin films was investigated by X-Ray Photoelectron Spectroscopy (XPS). The XPS surface surveys (top 30A) and depth profiling survey (top 100A) for the elements, their chemical states, and their relative concentration were analyzed for CIGS thin films. The XPS surface analysis and composition of CIGS thin films were correlated to the bulk composition and Na out-diffusion in the CIGS films from SLG substrates.

14 SOLAR ENERGY↗

Low-loss Si-based Dielectrics for High Frequency Components of Superconducting Detectors

Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric and metal layers can cause microwave losses and degrade device performance. Optimization of the dielectric fabrication, device structure, and surface morphology can help mitigate this problem. We present the fabrication of silicon oxide and nitride thin film dielectrics. We then characterized them using Scanning Electron Microscopy, Atomic Force Microscopy, and spectrophotometry techniques. The samples were synthesized using various deposition methods, including Plasma-Enhanced Chemical Vapor Deposition and magnetron sputtering. The film's morphology and structure were modified by adjusting the deposition pressure and gas flow. The resulting films were used in superconducting resonant systems consisting of planar inductors and capacitors. Measurements of the resonator properties, including their quality factor, were performed.

low-loss dielectrics↗

Tribology-Structure Relationships in Silicon Oxycarbide Thin Films

Silicon oxycarbide is a versatile material system that is attractive for many applications because of its ability to tune properties such as chemical compatibility, refractive index, electrical conductivity, and optical band gap through changes in composition. One particularly intriguing application lies in the production of biocompatible coatings with good mechanical properties. In this paper, we report on the wide range of mechanical and tribological property values exhibited by silicon oxycarbide thin films deposited by reactive radio frequency magnetron sputtering. Through a change in oxygen partial pressure in the sputtering plasma, the composition of the films was controlled to produce relatively pure SiO2, carbon-doped SiC, and compositions between these limits. Hardness values were 8-20 GPa over this range and the elastic modulus was measured to be between 60 and 220 GPa. We call attention to the fit of the mechanical data to a simple additive bond-mixture model for property prediction. Tribological parameters were measured using a ball-on-disk apparatus and the samples exhibited the same general trends for friction coefficient and wear rate. One film is shown to produce variable low friction behavior and low wear rate, which suggests a solid-state self-lubrication process because of heterogeneity on the nanometer scale.

36 MATERIALS SCIENCE↗

Synthesis and characteristics of new quaternary Ti-Mo-Si-N coatings by a hybrid coating system

Ternary Ti-Mo-N and new quaternary Ti-Mo-Si-N coatings were synthesized on substrates (AISI D2) and Si wafers by a hybrid coating system of an arc-ion plating technique using a Ti target and a dc magnetron sputtering technique using Mo and Si targets in N{sub 2}/Ar gaseous mixture. The ternary Ti-Mo-N coatings were substitutional solid solutions of (Ti,Mo)N and showed maximum hardness of about 30 GPa at a Mo content of {approx}10 at. %. With the addition of Si, the Ti-Mo-Si-N coating transformed into a nanocomposite consisting of fine (Ti,Mo)N crystallites and an amorphous Si{sub 3}N{sub 4} phase. The hardness of the Ti-Mo-Si(8.8 at. %)-N coatings significantly increased to {approx}48 GPa due to the microstructural change to the nanocomposite containing finer (Ti,Mo)N crystallites by the grain-size refinement effect of Si addition. The averaged friction coefficient of the Ti-Mo-Si-N coatings gradually decreased by increasing the Si content in the Ti-Mo-N coating. The microstructures of Ti-Mo-Si-N coatings were investigated with instrumental analyses of x-ray diffraction, x-ray photoelectron, and high-resolution transmission electron microscopy. In this work, the authors also investigated the effects of substrate bias voltage during deposition on the microstructure and mechanical property of Ti-Mo-Si-N coatings.

36 MATERIALS SCIENCE↗

Synthesis and mechanical properties of CrMoC{sub x}N{sub 1-x} coatings deposited by a hybrid coating system

Quaternary CrMoC{sub x}N{sub 1-x} coatings were deposited on steel substrates (AISI D2) and Si wafers by a hybrid coating system combining an arc-ion plating technique and a dc reactive magnetron sputtering technique using Cr and Mo targets in an Ar/N{sub 2}/CH{sub 4} gaseous mixture. The carbon content of CrMoC{sub x}N{sub 1-x} coatings was linearly increased with increasing CH{sub 4}/(CH{sub 4}+N{sub 2}) gas flow rate ratio. The maximum hardness of 44 GPa was obtained from the CrMoC{sub x}N{sub 1-x} coatings containing a carbon content of x=0.33 with a residual stress of -4.4 GPa. The average friction coefficient of Cr-Mo-N coatings was 0.42, and it is decreased to 0.31 after applying CrMoC{sub x}N{sub 1-x} coatings. This result was caused by the formation of a carbon-rich transfer layer that acted as a solid lubricant to reduce contact between the coating surface and steel ball. The microstructure of the coatings was investigated by x-ray diffraction, scanning electron microscopy, and x-ray photoelectron spectroscopy. In this work, the microstructure and mechanical properties of the CrMoC{sub x}N{sub 1-x} coatings were systematically investigated with the instrumental analyses.

36 MATERIALS SCIENCE↗