Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Growth of Cu{sub 2}O on Ga-doped ZnO and their interface energy alignment for thin film solar cells

Cu{sub 2}O thin films are deposited by direct current reactive magnetron sputtering on borofloat glass and indium tin oxide (ITO) coated glass at room temperature. The effect of oxygen partial pressure on the structures and properties of Cu{sub 2}O thin films are investigated. We show that oxygen partial pressure is a crucial parameter in achieving pure phases of CuO and Cu{sub 2}O. Based on this finding, we fabricate heterojunctions of p-type Cu{sub 2}O with n-type gallium doped ZnO (GZO) on ITO coated glass substrates by pulsed laser deposition for GZO thin films. The energy band alignment for thin films of Cu{sub 2}O/GZO on ITO glass is characterized using high-resolution x-ray photoelectron spectroscopy. The energy band alignment for the Cu{sub 2}O/GZO heterojunctions is determined to be type II with a valence band offset of 2.82 eV and shows negligible effects of variation with gallium doping. The higher conduction band of the Cu{sub 2}O relative to that of GZO in the obtained band alignment shows that the heterojunctions are suitable for solar cell application based on energy levels consideration.

36 MATERIALS SCIENCE↗

Analysis of the degradation induced by focused ion Ga{sup 3+} beam for the realization of piezoelectric nanostructures

Piezoelectric nanostructures (islands of dimensions in the lateral size range 50-500 nm) have been fabricated by focused Ga{sup 3+} ion beam (FIB) etching on PbZr{sub 0.54}Ti{sub 0.46}O{sub 3} thin films obtained by magnetron sputtering. The degradation induced by the etching process is investigated through the evolution of electromechanical activity measured by means of local piezoelectric hysteresis loops produced by piezoresponse force microscopy. The analysis of surface potential is performed by kelvin force microscopy and the measurement of current-voltage curves is carried out by conducting atomic force microscopy. Two kinds of structures, namely one based on crystallized films and the other based on amorphous ones, were studied. In this latter case, the amorphous films are postannealed after etching to obtain crystallized structure. For the structures based on the crystallized and then etched films, no piezoelectric signal was registered that evidences a serious degradation of material induced by Ga{sup 3+} ion implantation. For the structures based on the films etched in amorphous state and then crystallized, the piezoresponse signal was near to that of the reference films (crystallized and not etched) whatever were the ion dose and the island dimensions. Even for very small lateral size (50 nm), no size effect was observed. The island shapes fabricated by Ga{sup 3+} FIB etching process (islands with less than 50 nm lateral size) show a limitation of FIB processing and electron beam lithography seems to be necessary.

36 MATERIALS SCIENCE↗

Ab initio calculations and synthesis of the off-stoichiometric half-Heusler phase Ni{sub 1-x}Mn{sub 1+x}Sb

We perform a combined theoretical and experimental study of the phase stability and magnetism of the off-stoichiometric Ni{sub 1-x}Mn{sub 1+x}Sb in the half-Heusler crystal phase. Our work is motivated by the need for strategies to engineer the magnetism of potentially half-metallic materials, such as NiMnSb, for improved performance at elevated temperatures. By means of ab initio calculations we investigate Ni{sub 1-x}Mn{sub 1+x}Sb over the whole composition range 0{<=}x{<=}1 of Ni replacing Mn and show that at relevant temperatures, the half-Heusler phase should be thermodynamically stable up to at least x=0.20 with respect to the competing C38 structure of Mn{sub 2}Sb. Furthermore we find that half-Heusler Ni{sub 1-x}Mn{sub 1+x}Sb retains half-metallic band structure over the whole concentration range and that the magnetic moments of substitutional Mn{sub Ni} atoms display magnetic exchange interactions an order of magnitude larger than the Ni-Mn interaction in NiMnSb. We also demonstrate experimentally that the alloys indeed can be created by synthesizing off-stoichiometric Ni{sub 1-x}Mn{sub 1+x}Sb films on MgO substrates by means of magnetron sputtering.

36 MATERIALS SCIENCE↗

Microwave properties of epitaxial (111)-oriented Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} thin films on Al{sub 2}O{sub 3}(0001) up to 40 GHz

Perovskite Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} (BST) thin films have been grown on Al{sub 2}O{sub 3}(0001) substrates without/with inserting an ultrathin TiO{sub x} seeding layer by rf magnetron sputtering. X-ray diffraction and pole figure studies reveal that the film with the TiO{sub x} layer (12-A-thick) is highly oriented along the (111) direction and exhibits a good in-plane relationship of BST(111)||Al{sub 2}O{sub 3}(0001). The high frequency dielectric measurements demonstrate that the complex permittivity ({epsilon}={epsilon}{sup '}-j{epsilon}{sup ''}) is well described by a Curie-von Scheidler dispersion with an exponent of 0.40. The resulting epitaxial BST films show high permittivity ({approx}428) and tunability ({approx}41%, at 300 kV/cm and 40 GHz) and their microwave properties (1-40 GHz) potentially could be made suitable for tunable devices.

36 MATERIALS SCIENCE↗

Photovoltaic characteristics of Pd doped amorphous carbon film/SiO{sub 2}/Si

The Pd doped amorphous carbon (a-C:Pd) films were deposited on n-Si substrates with or without a native SiO{sub 2} layer using magnetron sputtering. The photovoltaic characteristics of the a-C:Pd/SiO{sub 2}/Si and a-C:Pd/Si junctions were studied. It is found that under light illumination of 15 mW/cm{sup 2} at room temperature, the a-C:Pd/SiO{sub 2}/Si solar cell fabricated at 350 deg. C has a high power conversion efficiency of 4.7%, which is much better than the a-C/Si junctions reported before. The enhanced conversion efficiency is ascribed to the Pd doping and the increase in sp{sup 2}-bonded carbon clusters in the carbon film caused by the high temperature deposition.

36 MATERIALS SCIENCE↗

On the microstructure of thin films grown by an isotropically directed deposition flux

The influence of isotropically directed deposition flux on the formation of the thin film microstructure at low temperatures is studied. For this purpose we have deposited TiO{sub 2} thin films by two different deposition techniques: reactive magnetron sputtering, in two different experimental configurations, and plasma enhanced chemical vapor deposition. The obtained results indicate that films grown under conditions where deposition particles do not possess a clear directionality, and in the absence of a relevant plasma/film interaction, present similar refractive indices no matter the deposition technique employed. The film morphology is also similar and consists of a granular surface topography and a columnarlike structure in the bulk whose diameter increases almost linearly with the film thickness. The deposition has been simulated by means of a Monte Carlo model, taking into account the main processes during growth. The agreement between simulations and experimental results indicates that the obtained microstructures are a consequence of the incorporation of low-energy, isotropically directed, deposition particles.

36 MATERIALS SCIENCE↗

Influence of neodymium concentration on excitation and emission properties of Nd doped gallium oxide nanocrystalline films

Gallium oxide and more particularly {beta}-Ga{sub 2}O{sub 3} matrix is an excellent material for new generation of devices electrically or optically driven as it is known as the widest band gap transparent conductive oxide. In this paper, the optical properties of neodymium doped gallium oxide films grown by magnetron sputtering have been analyzed. The influence of the Nd ions concentration on the excitation/emission mechanisms of Nd ions and the role of gallium oxide matrix have been investigated. The grain size reduction into gallium oxide films have been observed when concentration of Nd increases. It has been found for all samples that the charge transfer is the main excitation mechanism for Nd ions where defect states play an important role as intermediate states. As a consequence Nd emission efficiency increases with temperature giving rise to most intensive emission at 1087 nm at room temperature.

36 MATERIALS SCIENCE↗

Influence of the magnetic field annealing on the extrinsic damping of FeCoB soft magnetic films

In order to investigate the high-frequency damping properties of the ferromagnetic film for the electromagnetic shielding applications, FeCoB films with the thickness of 200 nm were fabricated by the rf magnetron sputtering and subsequently annealed with a static in-plane magnetic field of 2000 Oe under a series of temperatures. The annealed films exhibit excellent soft magnetic and microwave loss properties. The local resonance from the multiphase microstructure and two-magnon scattering at anisotropy inhomogeneities make an additional contribution to the extrinsic damping of the films. As a result, the film annealed at 450 deg. C achieves a high full width at half maximum {Delta}f up to 6 GHz for the imaginary part of the frequency-dependent permeability. These films could be novel candidates for the electromagnetic shielding applications.

36 MATERIALS SCIENCE↗

Effects of total thickness on (001) texture, surface morphology, and magnetic properties of [Fe/Pt]{sub n} multilayer films by monatomic layer deposition

Atomic-scale [Fe/Pt]{sub n} multilayer films with different total thickness were prepared on thermally oxidized Si (100) substrates at room temperature by monatomic layer deposition using dc-magnetron and rf-magnetron sputtering. Effects of the total thickness on (001) texture, surface morphology, and magnetic properties of the postannealed films have been investigated. It is found that the particlelike structure films with perfect (001) texture and perpendicular magnetic anisotropy are obtained with a thickness of less than or equal to 6.5 nm. After 500 deg. C annealing, the films with thickness of 6.5 and 11.9 nm show very smooth surface. In addition, with increasing total thickness of the films, (001) texture and perpendicular magnetic anisotropy of the annealed films deteriorate, and the films become continuous in structure. The total thickness of the films also affects the exchange-coupling interaction among FePt magnetic grains and the magnetization reversal process.

36 MATERIALS SCIENCE↗

AlN thin films grown on epitaxial 3C-SiC (100) for piezoelectric resonant devices

Highly c-axis oriented heteroepitaxial aluminum nitride (AlN) films were grown on epitaxial cubic silicon carbide (3C-SiC) layers on Si (100) substrates using alternating current reactive magnetron sputtering at temperatures between approximately 300-450 deg. C. The AlN films were characterized by x-ray diffraction, scanning electron microscope, and transmission electron microscopy. A two-port surface acoustic wave device was fabricated on the AlN/3C-SiC/Si composite structure, and an expected Rayleigh mode exhibited a high acoustic velocity of 5200 m/s. The results demonstrate the potential of utilizing AlN films on epitaxial 3C-SiC layers to create piezoelectric resonant devices.

36 MATERIALS SCIENCE↗

Electrical properties and stability of p-type ZnO film enhanced by alloying with S and heavy doping of Cu

Single wurtzite p-type Zn{sub 1-y}Cu{sub y}O{sub 1-x}S{sub x} alloy films with 0.081{<=}x{<=}0.186 and 0.09{<=}y{<=}0.159 were grown on quartz reproducibly by magnetron sputtering. The alloys show very stable p-type conductivity with a hole concentration of 4.31-5.78x10{sup 19} cm{sup -3}, a resistivity of 0.29-0.34 {Omega} cm and a mobility of 0.32-0.49 cm{sup 2} V{sup -1} s{sup -1}. The p-type conductivity is attributed to substitution of Cu{sup +1} for the Zn site, and the ionization energy of the Cu{sup +1} acceptor is measured to be 53 meV, much less than that of Cu-doped ZnO reported previously. The small ionization energy is due to Cu heavy doping and increase in valence band maximum of ZnO induced by alloying with S.

36 MATERIALS SCIENCE↗

Formation of void lattice after annealing of Ge quantum dot lattice in alumina matrix

We report on the formation of a regularly ordered void lattice with a void size of about 4 nm in an alumina matrix. The voids were formed by thermal treatment of a well-ordered three-dimensional Ge quantum dot lattice formed earlier by self-assembled growth in an alumina matrix during magnetron sputtering codeposition of Ge+Al{sub 2}O{sub 3}. During the subsequent annealing the germanium atoms were lost from the film and so voids were produced. The positions of the voids are ordered in the same way as the Ge quantum dots that were present before annealing, while their sizes can be controlled by the deposition parameters.

36 MATERIALS SCIENCE↗

Plasma-enabled growth of separated, vertically aligned copper-capped carbon nanocones on silicon

The formation of vertically aligned, clearly separated, copper-capped carbon nanocones with a length of up to 500 nm and base diameter of about 150 nm via three-stage process involving magnetron sputtering, N{sub 2} plasma treatment, and CH{sub 4}+N{sub 2} plasma growth is studied. The width of gaps between the nanocones can be controlled by the gas composition. The nanocone formation mechanism is explained in terms of strong passivation of carbon in narrow gaps, where the access of plasma ions is hindered and the formation of large C{sub n}H{sub 2n+2} molecules is possible. This plasma-enabled approach can be used to fabricate nanoelectronic, nanofluidic, and optoelectronic components and devices.

36 MATERIALS SCIENCE↗

Light absorption and electrical transport in Si:O alloys for photovoltaics

Thin films (100-500 nm) of the Si:O alloy have been systematically characterized in the optical absorption and electrical transport behavior, by varying the Si content from 43 up to 100 at. %. Magnetron sputtering or plasma enhanced chemical vapor deposition have been used for the Si:O alloy deposition, followed by annealing up to 1250 deg. C. Boron implantation (30 keV, 3-30x10{sup 14} B/cm{sup 2}) on selected samples was performed to vary the electrical sheet resistance measured by the four-point collinear probe method. Transmittance and reflectance spectra have been extracted and combined to estimate the absorption spectra and the optical band gap, by means of the Tauc analysis. Raman spectroscopy was also employed to follow the amorphous-crystalline (a-c) transition of the Si domains contained in the Si:O films. The optical absorption and the electrical transport of Si:O films can be continuously and independently modulated by acting on different parameters. The light absorption increases (by one decade) with the Si content in the 43-100 at. % range, determining an optical band gap which can be continuously modulated into the 2.6-1.6 eV range, respectively. The a-c phase transition in Si:O films, causing a significant reduction in the absorption coefficient, occurs at increasing temperatures (from 600 to 1100 deg. C) as the Si content decreases. The electrical resistivity of Si:O films can be varied among five decades, being essentially dominated by the number of Si grains and by the doping. Si:O alloys with Si content in the 60-90 at. % range (named oxygen rich silicon films), are proved to join an appealing optical gap with a viable conductivity, being a good candidate for increasing the conversion efficiency of thin-film photovoltaic cell.

36 MATERIALS SCIENCE↗

Structural and charge trapping properties of two bilayer (Ge+SiO{sub 2})/SiO{sub 2} films deposited on rippled substrate

We report on structural properties and charge trapping in [(Ge+SiO{sub 2})/SiO{sub 2}]x2 films deposited by magnetron sputtering on a periodically corrugated-rippled substrate and annealed in vacuum and forming gas. The rippled substrate caused a self-ordered growth of Ge quantum dots, while annealing in different environments enabled us to separate charge trapping in quantum dots from the trapping at the dot-matrix and matrix-substrate interfaces. We show that the charge trapping occurs mainly in Ge quantum dots in the films annealed in the forming gas, while Si-SiO{sub 2} interface trapping is dominant for the vacuum annealed films.

36 MATERIALS SCIENCE↗

Deuterium retention in tungsten exposed to low-energy pure and helium-seeded deuterium plasmas

Influence of helium (He) on the deuterium (D) retention in tungsten (W) under simultaneous He-D plasma exposure was investigated. Bulk polycrystalline tungsten and two W coatings on carbon substrate, namely, plasma-sprayed tungsten and combined magnetron-sputtered and ion implanted tungsten (CMSII-W) were exposed to pure and He-seeded D plasmas generated by electron-cyclotron-resonance plasma source. The D retention in each sample was subsequently analyzed by various methods such as nuclear reaction analysis for the D depth profiling up to 6 {mu}m and thermal desorption spectroscopy for the determination of total amount of D retention. It is shown that seeding of helium into D plasma with helium ion flux fraction of 10% reduces the deuterium retention for all tungsten grades but more significant reduction was observed for polycrystalline W and less significant effect was found for W coatings. From the thermal desorption spectroscopy measurements, we conclude that the presence of He modifies the density of existing traps for D but does not modify the nature of traps. Maximum effect of a reduction in the deuterium retention due to helium seeding was observed at around 500 K for bulk polycrystalline W. Mechanisms of deuterium retention and He effect in different W materials are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diamond/AlN Thin Films for Optical Applications

In this work we report on membranes made of nanocrystalline diamond (NCD) and AlN for the use in tunable micro-optics. For the growth of the AlN and NCD thin films, magnetron sputtering and chemical vapor deposition techniques have been used, respectively. A chemical-mechanical polishing process of NCD layers has been introduced, which is crucial for the growth of c-oriented, fiber textured AlN films. AlN layers deposited on as grown and polished nanocrystalline diamond along with free standing membranes have been compared by studying microstructure, surface morphology, piezoelectrical response as well as optical properties.

36 MATERIALS SCIENCE↗

Growth of ZnO:Al thin films onto different substrates

In this paper we present some results regarding undoped and doped ZnO thin films deposited on various substrates like glass, silicon and kapton by rf magnetron sputtering. The influence of the amount of aluminum as well as the usage of different substrates on the final photovoltaic properties of the thin films is studied. For this, structural-morphological and optical investigations on the thin films are conducted. It was found that three important factors must be taken into account for adjusting the final desired application intended for the deposited thin films. These factors are: deposition conditions, the nature of both the dopant material and the substrate. A comparison study between undoped and doped case is also realized. Smooth Al doped ZnO thin films with a polycrystalline structure and a lower roughness than undoped ZnO are obtained.

36 MATERIALS SCIENCE↗