Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Light absorption by secondary organic aerosol from α-pinene: Effects of oxidants, seed aerosol acidity, and relative humidity

It is well known that light absorption from dust and black carbon aerosols has a warming effect on climate while light scattering from sulfate, nitrate, and sea salt aerosols has a cooling effect. However, there are large uncertainties associated with light absorption and scattering by different types of organic aerosols, especially in the near-UV and UV spectral regions. In this paper, we present the results from a systematic laboratory study focused on measuring light absorption by secondary organic aerosols (SOAs) generated from dark α-pinene + O 3 and α-pinene + NO x + O 3 systems in the presence of neutral and acidic sulfate seed aerosols. Light absorption was monitored using photoacoustic spectrometers at four different wavelengths: 355, 405, 532, and 870 nm. Significant light absorption at 355 and 405 nm was observed for the SOA formed from α-pinene + O 3 + NO 3 system only in the presence of highly acidic sulfate seed aerosols under dry conditions. In contrast, no absorption was observed when the relative humidity was elevated to greater than 27% or in the presence of neutral sulfate seed aerosols. Organic nitrates in the SOA formed in the presence of neutral sulfate seed aerosols were found to be nonabsorbing, while the light-absorbing compounds are speculated to be aldol condensation oligomers with nitroxy organosulfate groups that are formed in highly acidic sulfate aerosols. Finally and overall, these results suggest that dark α-pinene + O 3 and α-pinene + NO x + O 3 systems do not form light-absorbing SOA under typical atmospheric conditions.

Song, Chen↗

Light stop mass limits from Higgs rate measurements in the MSSM: Is MSSM electroweak baryogenesis still alive after all?

We investigate the implications of the Higgs rate measurements from Run 1 of the LHC for the mass of the light scalar top partner (stop) in the Minimal Supersymmetric Standard Model (MSSM). We focus on light stop masses, and we decouple the second, heavy stop and the gluino to the multi-TeV range in order to obtain a Higgs mass of ~125 GeV. We derive lower mass limits for the light stop within various scenarios, taking into account the effects of a possibly light scalar tau partner (stau) or chargino on the Higgs rates, of additional Higgs decays to undetectable “new physics”, as well as of non-decoupling of the heavy Higgs sector. Under conservative assumptions, the stop can be as light as 123 GeV. Relaxing certain theoretical and experimental constraints, such as vacuum stability and model-dependent bounds on sparticle masses from LEP, we find that the light stop mass can be as light as 116 GeV. Lastly, our indirect limits are complementary to direct limits on the light stop mass from collider searches and have important implications for electroweak baryogenesis in the MSSM as a possible explanation for the observed matter-antimatter asymmetry of the Universe.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Trends in Light and Temperature Sensitivity Recommendations among Licensed Biotechnology Drug Products

Inherent structural and functional properties of biotechnology-derived therapeutic biologics make them susceptible to light- and temperature-induced degradation and consequently can influence their quality. Photosensitivity of therapeutic proteins continues to be examined, but the commonalities and trends of storage conditions and information about light and temperature sensitivity among currently licensed therapeutic proteins has not been previously surveyed. Using a comprehensive and relational database approach, we conducted a scientific survey of all licensed biotechnology-derived drug products with the goal of providing evidence-based information about recommended storage conditions of formulations sorted by light- and temperature-related attributes as described for each product at licensure. We report the prevalence of indications for light and temperature sensitivity in formulations categorized by their presentation type, number of doses, container type, dosage form and active molecule type. We also report the storage temperature range across formulations and diluents for reconstitution and dilution. Formulations with excipients that potentially facilitate light-induced and thermal degradation were also noted. The result of our analysis indicates that light and temperature sensitivity are prevalent across therapeutic protein formulations. However, when a formulation is reconstituted or diluted, both light and temperature sensitivity are less clear. In addition, light and temperature sensitivity are more well defined in liquid formulations than lyophilized powder formulations, and more well defined in products manufactured in autoinjectors, prefilled-syringes, and pens than products in vials. Overall, our report provides a data-driven summary of storage conditions among therapeutic protein formulations to support the development of future biologic drug products.

60 APPLIED LIFE SCIENCES↗

Short-term exposure to dim light at night disrupts rhythmic behaviors and causes neurodegeneration in fly models of tauopathy and Alzheimer's disease

Highlights: • Dim light disturbs circadian rhythm and sleep behaviors. • Internal clock is maintained in Drosophila model of tauopathy Alzheimer's disease. • Short-term disturbance of circadian rhythm by dim light increases formation of phosphorylated Tau in AD model flies. • Dim light exposure at night promotes neurodegeneration in AD model flies. The accumulation and aggregation of phosphorylated tau proteins in the brain are the hallmarks for the onset of Alzheimer's disease (AD). In addition, disruptions in circadian rhythms (CRs) with altered sleep-wake cycles, dysregulation of locomotion, and increased memory defects have been reported in patients with AD. Drosophila flies that have an overexpression of human tau protein in neurons exhibit most of the symptoms of human patients with AD, including locomotion defects and neurodegeneration. Using the fly model for tauopathy/AD, we investigated the effects of an exposure to dim light at night on AD symptoms. We used a light intensity of 10 lux, which is considered the lower limit of light pollution in many countries. After the tauopathy flies were exposed to the dim light at night for 3 days, the flies showed disrupted CRs, altered sleep-wake cycles due to increased pTau proteins and neurodegeneration, in the brains of the AD flies. The results indicate that the nighttime exposure of tauopathy/AD model Drosophila flies to dim light disrupted CR and sleep-wake behavior and promoted neurodegeneration.

60 APPLIED LIFE SCIENCES↗

Nitrogen-sensitized dual phase titanate/titania for visible-light driven phenol degradation

A dual-phase material (DP-160) comprising hydrated titanate (H{sub 2}Ti{sub 3}O{sub 7}{center_dot}xH{sub 2}O) and anatase (TiO{sub 2}) was synthesized in a low-temperature one-pot process in the presence of triethylamine (TEA) as the N-source. The unique structure exhibits strong visible light absorption. The chromophore is linked to Ti-N bonds derived from both surface sensitization and sub-surface (bulk) doping. From transmission electron microscope (TEM) and textural studies by N{sub 2} physisorption, the composite exists as mesoporous particles with a grain size of {approx}20 nm and mean pore diameter of 3.5 nm, responsible for the high surface area ({approx}180 m{sup 2}/g). DP-160 demonstrated photocatalytic activity in the degradation of phenol under visible light ({lambda}>420 nm). The activity of the composite was further enhanced by a small addition (0.001 M) of H{sub 2}O{sub 2}, which also gave rise to some visible light activity in the control samples. This effect is believed to be associated with the surface peroxo-titanate complex. GC-MS analyses showed that the intermediate products of phenol degradation induced by visible light irradiation of DP-160 did not differ from those obtained by UV (band-gap) irradiation of TiO{sub 2}. The overall performance of the composite is attributed to efficient excitation via inter-band states (due to N-doping), surface sensitization, improved adsorptive properties of aromatic compounds due to the N-carbonaceous overlayer, and the presence of heterojunctions that are known to promote directional charge transfer in other mixed-phase titanias like Degussa P25. - graphical abstract: Nitrogen-sensitized dual phase titanate/titania photocatalyst showing extended visible light absorption and efficient photocatalytic degradation of phenol. Highlights: Black-Right-Pointing-Pointer Low temperature one-pot synthesis of visible light active dual phase photocatalyst. Black-Right-Pointing-Pointer The dual phase consists of nanoscale titanate and anatase titania phases. Black-Right-Pointing-Pointer The photocatalyst displays high activity in degrading phenol under visible light. Black-Right-Pointing-Pointer Mechanisms for the sensitization to visible light are considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A one-pot, solid-state route for realizing highly visible light active Na-doped gC{sub 3}N{sub 4} photocatalysts

The visible light photocatalytic activity of graphitic carbon nitride (gC{sub 3}N{sub 4}), a promising metal-free photocatalytic material, is rather low, and is not as good as expected. Herein, to realize improved photocatalytic activity, sodium-doped gC{sub 3}N{sub 4} (Na-gC{sub 3}N{sub 4}) is prepared through a novel solid-state process based on the thermal polycondensation of urea in the presence of sodium chloride and ammonium chloride. The proposed solid-state process is simple, requires no solvent, and provides a general route for rapid and large-scale synthesis of metal-doped gC{sub 3}N{sub 4}. The Na species exist in + 1 oxidation state and bind N atoms in the nitride ring of gC{sub 3}N{sub 4}. The photocatalytic activity improvement of gC{sub 3}N{sub 4} for the mineralization of 17α-ethynylestradiol (EE2) under visible light is seen after the Na doping. The improved photocatalytic activity is due to increased absorption of light, increased separation of charge carriers, stronger oxidation ability of valance band holes, and increased specific surface area. The typical photocatalytic activity of 0.6 wt% Na-gC{sub 3}N{sub 4} for the EE2 mineralization with an initial EE2 concentration of 1 mg/L and a catalyst concentration of 1 g/L is 95.7% within 2 h of visible light irradiation. Under identical experimental conditions, the EE2 mineralization by pristine gC{sub 3}N{sub 4} is only 23.5%. - Graphical abstract: Highly visible light active Na-gC{sub 3}N{sub 4} photocatalysts were simply synthesized through a novel one-pot route based on the thermal polycondensation of urea. The doped Na species plays a critical role in improving the photocatalytic activity. Display Omitted - Highlights: • A new solid-state route is introduced to obtain visible light active Na-doped gC{sub 3}N{sub 4}. • The proposed synthesis route is fast, simple, and highly scalable. • Na doping leads to improved light absorption capability. • Na doping leads to improved separation of charge carriers. • Na doping leads to improved photocatalytic activity under visible light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic activity of attapulgite–BiOCl–TiO{sub 2} toward degradation of methyl orange under UV and visible light irradiation

Highlights: • Excellent photocatalyst was obtained by introducing BiOCl–TiO{sub 2} onto attapulgite. • 100 mg L{sup −1} methyl orange (MO) was totally decomposed under UV light within 70 min. • 92.6% of 10 mg L{sup −1} MO was decomposed within 120 min under visible light. • ATT–BiOCl–TiO{sub 2} show better activity than P{sub 25} especially under visible light. • Mechanism of photocatalytic activity enhancement was identified. - Abstract: An environmental friendly composite photocatalyst with efficient UV and visible light activity has been synthesized by introducing BiOCl–TiO{sub 2} hybrid oxide onto the surface of attapulgite (ATT) (denoted as ATT–BiOCl–TiO{sub 2}), using a simple in situ depositing technique. The obtained products were characterized by XRD, TEM, BET and UV–vis diffuse reflectance spectra measurements. Results showed that BiOCl–TiO{sub 2} composite particles were successfully loaded onto attapulgite fibers' surface without obvious aggregation. The photocatalytic activity of ATT–BiOCl–TiO{sub 2} was investigated by degradation of methyl orange under UV and visible light irradiation. It was found that 100 mg L{sup −1} methyl orange was totally decomposed under UV light within 70 min and 92.57% of 10 mg L{sup −1} methyl orange was decomposed under visible light within 120 min using ATT–BiOCl–TiO{sub 2} as photocatalyst. These results were quite better than that of P{sub 25}, especially under visible light irradiation. Possible mechanism for the enhancement was proposed.

36 MATERIALS SCIENCE↗

Impact of Selected High-Performance Fuel Blends on Three-Way Catalyst Light Off under Synthetic Spark-Ignition Engine-Exhaust Conditions

The U.S. Department of Energy funded Co-Optimization of Fuels and Engines initiative aims to simultaneously develop advanced engines along with high-performance fuels to reduce petroleum consumption. The engine exhaust of spark-ignited light-duty vehicles contains pollutants such as nitrogen oxides, carbon monoxide (CO), and non-methane organic gases. When operated above their “light-off” temperature, three-way catalysts (TWCs) efficiently control the emissions of these pollutants from the vehicle exhaust. However, below the catalyst light-off temperature, during cold start, the TWCs are not effective. Thus, the stringent environmental regulations necessitate cold-start compliance of advanced engines operating on novel fuels for commercialization. Exhaust composition strongly impacts the effectiveness of TWCs. Hence, ensuring that the high-performance fuels under consideration do not have detrimental effects on current emissions control technology is necessary. To mitigate cold-start emissions, a low light-off temperature of the fuel on the TWC is desirable. As real-world fuels are multicomponent blends, we conducted investigations into the light-off behavior of representative fuel mixtures on a three-mode redox-aged commercial TWC under synthetic engine-exhaust conditions. The high-performance fuels in this study included 10–30% volumetric levels of ethanol, isobutanol, diisobutylene, and an aromatic mixture. Each of these high-performance fuel components was mixed into a gasoline surrogate blendstock for oxygenate blending (BOB). Our results showed that aromatics and alkenes in the surrogate BOB inhibit low-temperature reactivity of alkanes, alcohols, and CO on the TWC and dominate the blend light-off behavior. All the high-performance fuel blends had a very similar light-off behavior to the surrogate gasoline BOB, indicating that blending up to 30% (by vol.) of high-performance blendstocks in a gasoline base fuel can potentially reduce greenhouse gas emissions through improved engine efficiency and petroleum displacement without jeopardizing the ability to meet emissions regulations. While some high-performance blendstocks demonstrated lower light-off temperatures than a surrogate gasoline blend, taking advantage of the higher catalytic reactivity of these blendstocks to reduce cold-start emissions would require reducing the aromatic content in petroleum-based market fuels.

33 ADVANCED PROPULSION SYSTEMS↗

Global evidence for the acclimation of ecosystem photosynthesis to light

Photosynthesis responds quickly to changes in light, increasing with incoming photosynthetic photon flux density (PPFD) until the leaves become light saturated. This instantaneous response to PPFD, which is widely studied and incorporated into models of photosynthesis, is overlaid on non-instantaneous photosynthetic changes resulting from the acclimation of plants to average PPFD over intermediate timescales of a week to months ($\overline{PPFD}$). Such photosynthetic light acclimation is not typically incorporated into models, due to the lack of observational constraints. In this work, we use eddy covariance observations from globally distributed and automated sensor networks, along with photosynthesis estimates from nine terrestrial biosphere models (TBMs), to quantify and assess photosynthetic acclimation to light in natural environments. We also use recent theoretical developments to incorporate light acclimation in a TBM. Our results show widespread light acclimation of ecosystem photosynthesis. On average, a 1 μmol m -2 s -1 increase in $\overline{PPFD}_{10}$ (ten-day average PPFD) leads to a 0.031 ± 0.013 μmol C m -2 s -1 increase in the maximum photosynthetic assimilation rate (A max ), with croplands having stronger acclimation rates than grasslands and forests. Our analysis shows that the TBMs examined either neglect or substantially underestimate light acclimation. By updating a TBM to include photosynthetic acclimation, successfully reproducing the $\overline{PPFD}_{10}$-A max relationship, we provide a robust method for the incorporation of photosynthetic light acclimation in future models.

59 BASIC BIOLOGICAL SCIENCES↗

Light-Front Quantization Approach to the Gauge-Gravity Correspondence and Hadron Spectroscopy

We find a correspondence between semiclassical QCD quantized on the light-front and a dual gravity model in anti--de Sitter (AdS) space, thus providing an initial approximation to QCD in its strongly coupled regime. This correspondence--light-front holography--leads to a light-front Hamiltonian and relativistic bound-state wave equations that are functions of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within hadrons at equal light-front time. The eigenvalues of the resulting light-front Schroedinger and Dirac equations are consistent with the observed light meson and baryon spectrum, and the eigenmodes provide the light-front wavefunctions, the probability amplitudes describing the dynamics of the hadronic constituents. The light-front equations of motion, which are dual to an effective classical gravity theory, possess remarkable algebraic and integrability properties which are dictated by the underlying conformal properties of the theory. We extend the algebraic construction to include a confining potential while preserving the integrability of the mesonic and baryonic bound-state equations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Light propagation in a neutron detector based on 6 Li glass scintillator particles in an organic matrix

Composite materials consisting of 6 Li scintillator particles in an organic matrix can enable thermal neutron detectors with excellent rejection of gamma-ray backgrounds. The efficiency of transporting scintillation light through such a composite is critical to the detector performance. This optical raytracing study of a composite thermal neutron detector quantifies the various sources of scintillation light loss and identifies favorable photomultiplier tube (PMT) readout schemes. The composite material consisted of scintillator cubes within an organic matrix shaped as a right cylinder. The cylinder surface was surrounded by an optical reflector, and the light was detected by PMTs attached to the cylinder end faces. A reflector in direct contact with the composite caused 53% loss of scintillation light. This loss was reduced 8-fold by creating an air gap between the composite and the reflector to allow a fraction of the scintillation light to propagate by total internal reflection. Replacing a liquid mineral oil matrix with a solid acrylic matrix decreased the light transport efficiency by only ~10% for the benefit of creating an all-solid-state device. The light propagation loss was found to scale exponentially with the distance between the scintillation event and the PMT along the cylinder main axis. This enabled a PMT readout scheme that corrects for light propagation loss on an event-by-event basis and achieved a 4.0% energy resolution that approached Poisson-limited performance. These results demonstrate that composite materials can enable practical thermal neutron detectors for a wide range of nuclear non-proliferation and safeguard applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Temporal evolution of the light emitted by a thin, laser-ionized plasma source

We present an experimental and simulation-based investigation of the temporal evolution of light emission from a thin, laser-ionized helium plasma source. We demonstrate an analytic model to calculate the approximate scaling of the time-integrated, on-axis light emission with the initial plasma density and temperature, supported by the experiment, which enhances the understanding of plasma light measurement for plasma wakefield accelerator (PWFA) plasma sources. Our model simulates the plasma density and temperature using a split-step Fourier code and a particle-in-cell code. A fluid simulation is then used to model the plasma and neutral density, and the electron temperature as a function of time and position. We then show the numerical results of the space-and-time-resolved light emission and that collisional excitation is the dominant source of light emission. We validate our model by measuring the light emitted by a laser-ionized plasma using a novel statistical method capable of resolving the nanosecond-scale temporal dynamics of the plasma light using a cost-effective camera with microsecond-scale timing jitter. This method is ideal for deployment in the high radiation environment of a particle accelerator that precludes the use of expensive nanosecond-gated cameras. Our results show that our models can effectively simulate the dynamics of a thin, laser-ionized plasma source. In addition, this work provides a detailed understanding of the plasma light measurement, which is one of the few diagnostic signals available for the direct measurement of PWFA plasma sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Adiabatic light guide with S-shaped strips

A light guide is an essential part of many scintillator counters and light collection systems. Our main interest is a light guide for a thin, wide scintillator that has high light transmission while converting the area of the light source to the shape of a photo-detector. Here, we propose a variation of the light guide that avoids a 90° twist of the strips, reduces the length of the light pipe, and reduces the complexity of production. Detailed Monte Carlo simulation studies have been performed for a three-strip S-shaped light-guide system.

47 OTHER INSTRUMENTATION↗

Engineering an improved light-induced dimer (iLID) for controlling the localization and activity of signaling proteins

The discovery of light-inducible protein–protein interactions has allowed for the spatial and temporal control of a variety of biological processes. To be effective, a photodimerizer should have several characteristics: it should show a large change in binding affinity upon light stimulation, it should not cross-react with other molecules in the cell, and it should be easily used in a variety of organisms to recruit proteins of interest to each other. In this study, to create a switch that meets these criteria we have embedded the bacterial SsrA peptide in the C-terminal helix of a naturally occurring photoswitch, the light-oxygen-voltage 2 (LOV2) domain from Avena sativa. In the dark the SsrA peptide is sterically blocked from binding its natural binding partner, SspB. When activated with blue light, the C-terminal helix of the LOV2 domain undocks from the protein, allowing the SsrA peptide to bind SspB. Without optimization, the switch exhibited a twofold change in binding affinity for SspB with light stimulation. Here, we describe the use of computational protein design, phage display, and high-throughput binding assays to create an improved light inducible dimer (iLID) that changes its affinity for SspB by over 50-fold with light stimulation. A crystal structure of iLID shows a critical interaction between the surface of the LOV2 domain and a phenylalanine engineered to more tightly pin the SsrA peptide against the LOV2 domain in the dark. Finally, we demonstrate the functional utility of the switch through light-mediated subcellular localization in mammalian cell culture and reversible control of small GTPase signaling.

59 BASIC BIOLOGICAL SCIENCES↗

CATALOG OF 93 NOVA LIGHT CURVES: CLASSIFICATION AND PROPERTIES

We present a catalog of 93 very-well-observed nova light curves. The light curves were constructed from 229,796 individual measured magnitudes, with the median coverage extending to 8.0 mag below peak and 26% of the light curves following the eruption all the way to quiescence. Our time-binned light curves are presented in figures and as complete tabulations. We also calculate and tabulate many properties about the light curves, including peak magnitudes and dates, times to decline by 2, 3, 6, and 9 mag from maximum, the time until the brightness returns to quiescence, the quiescent magnitude, power-law indices of the decline rates throughout the eruption, the break times in this decline, plus many more properties specific to each nova class. We present a classification system for nova light curves based on the shape and the time to decline by 3 mag from the peak (t{sub 3}). The designations are 'S' for smooth light curves (38% of the novae), 'P' for plateaus (21%), 'D' for dust dips (18%), 'C' for cusp-shaped secondary maxima (1%), 'O' for quasi-sinusoidal oscillations superposed on an otherwise smooth decline (4%), 'F' for flat-topped light curves (2%), and 'J' for jitters or flares superposed on the decline (16%). Our classification consists of this single letter followed by the t{sub 3} value in parentheses; so, for example, V1500 Cyg is S(4), GK Per is O(13), DQ Her is D(100), and U Sco is P(3).

79 ASTRONOMY AND ASTROPHYSICS↗

SECONDARY PARAMETERS OF TYPE Ia SUPERNOVA LIGHT CURVES

High-quality observations of B and V light curves obtained at Las Campanas Observatory for local Type Ia Supernovae (SNe Ia) show clear evidence that SNe Ia with the same brightness decline or stretch may have systematic and independent deviations at times t {approx}< 5 days before and at times t {approx}> 30 days after maximum light. This suggests the existence of two independent secondary parameters that control the shape of SN Ia light curves in addition to the primary light curve parameter, stretch s or DELTAm{sub 15}. The secondary parameters may reflect two independent physical effects caused by variations in the initial carbon-to-oxygen (C/O) profile in the progenitor and the initial central density rho{sub c} in a carbon-oxygen white dwarf exploding as an SN Ia. Theoretical light curves of delayed detonation SN Ia models with varying progenitor masses on the main sequence, varying accretion rates, and varying primordial metallicity reproduce two morphologically different and independent types of variations in observed visual light curves. These calculations predict small variations of {approx}0.05 mag in the absolute brightness of SNe Ia which are correlated with the variations of progenitor mass on the main-sequence M{sub MS}, which changes the C/O profile, and rho{sub c}, which depends on the accretion rate. Such variations in real supernovae will induce systematic errors in SN Ia calibration at high redshifts. A physically motivated three-parameter, s, C/O, rho{sub c}, template for SNe Ia light curves might take these variations into account. Comparison between the theoretical predictions and the observational results agree qualitatively; however, the observations show variations between the B and V light curves that are not expected from the modeling and may indicate limitations in the details of the theoretical models.

79 ASTRONOMY AND ASTROPHYSICS↗

DISSIPATION AND EXTRA LIGHT IN GALACTIC NUCLEI. II. 'CUSP' ELLIPTICALS

We study the origin and properties of 'extra' or 'excess' central light in the surface brightness profiles of cusp or power-law elliptical galaxies. Dissipational mergers give rise to two-component profiles: an outer profile established by violent relaxation acting on stars already present in the progenitor galaxies prior to the final stages of the merger, and an inner stellar population comprising the extra light, formed in a compact central starburst. By combining a large set of hydrodynamical simulations with data that span a broad range of profiles at various masses, we show that observed cusp ellipticals appear consistent with the predicted 'extra light' structure, and we use our simulations to motivate a two-component description of the observations that allows us to examine how the properties and mass of this component scale with, e.g., the mass, gas content, and other properties of the galaxies. We show how to robustly separate the physically meaningful extra light and outer, violently relaxed profile, and demonstrate that the observed cusps and 'extra light' are reliable tracers of the degree of dissipation in the spheroid-forming merger. We show that the typical degree of dissipation is a strong function of stellar mass, roughly tracing the observed gas fractions of disks of the same mass over the redshift range z {approx} 0-2. We demonstrate a correlation between the strength of this component and effective radius at fixed mass, in the sense that systems with more dissipation are more compact, sufficient to explain the discrepancy in the maximum phase-space and mass densities of ellipticals and their progenitor spirals. We show that the outer shape of the light profile in simulated and observed systems (when fit to properly account for the central light) does not depend on mass, with a mean outer Sersic index {approx}2.5. We also explore how this relates to, e.g., the shapes, kinematic properties, and stellar population gradients of ellipticals. Extra light contributes to making remnants rounder and diskier, and imprints stellar population gradients. Simulations with the gas content needed to match observed surface brightness profiles reproduce the observed age, metallicity, and color gradients of cusp ellipticals, and we make predictions for how these can be used as tracers of the degree of dissipation in spheroid formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Roadmap on quantum light spectroscopy

Conventional spectroscopy uses classical light to detect matter properties through the variation of its response with frequencies or time delays. Quantum light opens up new avenues for spectroscopy by utilizing parameters of the quantum state of light as novel control knobs and through the variation of photon statistics by coupling to matter. This Roadmap article focuses on using quantum light as a powerful sensing and spectroscopic tool to reveal novel information about complex molecules that is not accessible by classical light. It aims at bridging the quantum optics and spectroscopy communities which normally have opposite goals: manipulating complex light states with simple matter e.g. qubits versus studying complex molecules with simple classical light, respectively. Here, articles cover advances in the generation and manipulation of state-of-the-art quantum light sources along with applications to sensing, spectroscopy, imaging and interferometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗