Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LITHIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Lithium Nucleation of Anode-Free Solid-State Batteries with a Dry Compressible Interlayer

Anode-free lithium batteries offer promising advantages, including increased energy density and the ability to address common mechanistic failures within the cell, thus increasing safety. One way that can make this possible is to control lithium nucleation. This could be achieved by reducing the overpotential required and implanting lithophilic nucleation sites in an anodic interlayer to aid in lithium ion transport and plating. The concept has been utilized in solid-state battery systems where electrolytes are solids with further improved safety and structural longevity. In this presentation, we discuss the use of a silver-holey graphene-based anodic interlayer that can be fabricated via direct dry compression without the use of solvent or binder. The addition of silver to the holey graphene matrix creates a route to lithium plating via a lower-energy intermediate. This idea is supported by the presence of a lithium-silver alloy that forms during the activation step. It is understood that the embedded silver acts as a nucleation site for lithium ions, thereby assisting in even plating. This control, combined with the added cushion of the holey graphene itself, can help reduce dendrite formation, ultimately increasing the safety and lifetime of the solid-state batteries.

Solid state batteries↗

Fueling Studies on the Lithium Tokamak Experiment

Lithium plasma facing components reduce the flux of "recycled" particles en- tering the plasma edge from the plasma facing components. This results in increased external fueling requirements and provides the opportunity to control the magnitude and distribution of the incoming particle flux. It has been pre- dicted that the plasma density profile will then be determined by the deposition profile of the external fueling, rather than dominated by the recycled particle flux. A series of experiments on the Lithium Tokamak Experiment demonstrate that lithium wall coatings facilitate control of the neutral and plasma particle in- ventories. With fresh lithium coatings and careful gas injection programming, over 90% of the injected particle inventory can be absorbed in the lithium wall during a discharge. Furthermore, dramatic changes in the fueling requirements and plasma parameters were observed when lithium coatings were applied. This is largely due to the elimination of water as an impurity on the plasma facing components. A Molecular Cluster Injector (MCI) was developed for the fueling of LTX plas- mas. The MCI uses a supersonic nozzle, cooled to liquid nitrogen temperatures, to create the conditions necessary for molecular cluster formation. It has been predicted that molecular clusters will penetrate deeper into plasmas than gas- phase molecules via a reduced ionization cross-section and by improving the collimation of the neutral jet. Using an electron beam diagnostic, the densities of the cryogenic MCI are measured to be an order of magnitude higher than in the room-temperature jets formed with the same valve pressure. This indi- cates increased collimation relative to what would be expected from ideal gas dynamics alone. A systematic study of the fueling efficiencies achieved with the LTX fueling systems is presented. The fueling efficiency of the Supersonic Gas Injector (SGI) is demonstrated to be strongly dependent on the distance between the nozzle and plasma edge. The fueling efficiency of the gas puffer was improved by the addition of a guide tube to keep the gas flow collimated and directed towards the plasma edge. Contrary to results reported on other devices, the MCI yields fueling efficiencies that are at best equal to the SGI. This suggests that any enhanced penetration from cluster formation is nullified by the reduced velocity of the cryogenic gas. Furthermore, at very high neutral fluxes, the fueling efficiency of the MCI dropped off dramatically, suggesting that the build-up of pressure in the scrape-off-layer is producing a self-shielding effect. All of these results are consistent with the idea that the best gas-based fueling source is one that brings highly directed neutrals to the plasma edge, without being scattered or ionized in the scrape-off-layer. The density profiles of LTX plasmas are measured during external fueling with the gas puffer, SGI, and cryogenic MCI. While the density profile amplitude increases with higher fueling rates, the shape of the profile remains constant. This suggests that particle transport is such that differences in the neutral deposition cannot be discerned. The density profiles are consistently hollow, suggesting a region of reduced particle transport in the core of LTX plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatial Description of Lithium Plating

Fast charging lithium ion batteries is a critical obstacle to overcome before widespread uptake of electric vehicles. During fast charging, lithium ion batteries in electric vehicles degrade at an accelerated rate, which is frequently caused by lithium plating. In this presentation, three different methods to spatially and temporally detect and quantify lithium plating are presented; notably, mass spectroscopy titration, operando depth profiling X-ray diffraction, and in-situ X-ray diffraction mapping of pouch cells. Each of the tree techniques successfully quantify lithium plating and provide insight into its spatial occurrence within lithium ion cells.

47 OTHER INSTRUMENTATION↗

The Effect of Artificial SEIs on Lithium Metal Anode Morphology and Conductivity

Lithium metal has often been termed the “holy grail” of battery technology, due to its high capacity (2,061 mAh/cm3) and low electrochemical potential (-3.04 V vs. SHE). However, lithium’s beneficially low potential also causes it to be highly reactive in the presence of organic solvents, making it difficult to harness the high energy capabilities for rechargeable batteries. Common failure of lithium metal batteries occurs by rapid dendrite growth leading to a hazardous short-circuit. Various methods have been brought forth to better understand the fundamental mechanisms of lithium metal batteries, as well as modifications made to better stabilize lithium metal. A common route of modification is done through interface engineering, with attempts to artificially provide a stable, homogeneous solid-electrolyte interface (SEI). The stability of the SEI has direct effects on the heterogeneity of the electrode surface, which initiates a waterfall effect of for progressive reactions such as dendrite growth, dead lithium accumulation, and electrolyte consumption. This work aims to produce a mixed LiI-LiF artificial SEI to improve ionic conductivity while retaining a high elastic modulus.

25 ENERGY STORAGE↗

Mechanical Design of the NSTX Liquid Lithium Divertor

The Liquid Lithium Divertor (LLD) on NSTX will be the first test of a fully-toroidal liquid lithium divertor in a high-power magnetic confinement device. It will replace part of the lower outboard divertor between a specified inside and outside radius, and ultimately provide a lithium surface exposed to the plasma with enough depth to absorb a significant particle flux. There are numerous technical challenges involved in the design. The lithium layer must be as thin as possible, and maintained at a temperature between 200 and 400 degrees Celsius to minimize lithium evaporation. This requirement leads to the use of a thick copper substrate, with a thin stainless steel layer bonded to the plasma-facing surface. A porous molybdenum layer is then plasma-sprayed onto the stainless steel, to provide a coating that facilitates full wetting of the surface by the liquid lithium. Other challenges include the design of a robust, vacuumcompatible heating and cooling system for the LLD. Replacement graphite tiles that provided the proper interface between the existing outer divertor and the LLD also had to be designed, as well as accommodation for special LLD diagnostics. This paper describes the mechanical design of the LLD, and presents analyses showing the performance limits of the LLD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Facile Potential Hold Method for Fostering an Inorganic Solid-Electrolyte Interphase for Anode-Free Lithium-Metal Batteries

Anode-free lithium batteries are regarded as an ultimate form of high-energy-density lithium-ion batteries. Unfortunately, irreversible lithium loss during cycling plays a major role in degrading the overall cell performance in the anode-free configuration. To alleviate the deterioration, building a robust solid-electrolyte interface on an anode current collector is an indispensable requirement. Here, we present a facile in-situ electrochemical method of a potential hold during the first charge to guide more salt-derived (less solvent-derived) decomposition on the anode interface. Here we show the distinctive decomposition potential of lithium salts and ether/carbonate solvents, where the Li-solvation structures with salt contact-ion-pairs preferentially decompose to form LiF-rich and less organic components, leading to enhanced lithium Coulombic efficiency in Li||Cu cells as well as mitigating the capacity fade of Cu||LiFePO 4 and Cu||LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physico-chemical mechanisms involved in the acceleration of the hydration of calcium sulfoaluminate cement by lithium ions

This work investigates the influence of lithium ions on the hydration at 25 °C of two calcium sulfoaluminate (CSA) cements comprising 0 or 10% gypsum. Small concentrations of lithium salts (LiOH, LiNO{sub 3}) accelerate the early hydration of both CSA cements either in paste or in diluted and stirred suspension. The effect of the lithium cation is much stronger than its counter-ion. Hydration is accelerated by an increase in the lithium concentration up to 30 μmol Li/g of the used CSA cement (with a high ye'elimite content), and then levels off. The postulated mechanism relies on a fast precipitation of amorphous Li-containing Al(OH){sub 3}, which acts as seeds for accelerating the precipitation of amorphous Al(OH){sub 3} that speeds up the whole hydration process. This process seems to be closely related to the one involved in the acceleration of the hydration of calcium aluminate cement by lithium ions.

36 MATERIALS SCIENCE↗

Channels occupancy and distortion in new lithium uranyl phosphates with three-dimensional open-frameworks

Three new lithium uranyl phosphates, Li{sub 2}(UO{sub 2}){sub 3}(PO{sub 4}){sub 2}O (1), Li(UO{sub 2}){sub 4}(PO{sub 4}){sub 3} (2) and Li{sub 3}(UO{sub 2}){sub 7}(PO{sub 4}){sub 5}O (3) were synthesized and studied. Powders of 1 and 2 were synthesized via solid state reaction, and single crystals of the three compounds were obtained by melting of 1 and 2 powders. The structures of the three compounds have been solved and refined from single crystal X-ray diffraction data. In the three compounds, the uranium atoms occupy square and pentagonal bipyramids. The uranium square bipyramids and phosphate tetrahedra are connected by vertices to form two types of layers with autunite sheet anion-topology {sub i}nfinity{sup 2}[(UO{sub 2})(PO{sub 4}){sub 2}]{sup 4-} and {sub i}nfinity{sup 2}[(UO{sub 2}){sub 2}(PO{sub 4}){sub 3}]{sup 5-}denoted S and D, respectively. The uranyl pentagonal bipyramids share opposite equatorial edges to form {sub i}nfinity{sup 1}[UO{sub 5}]{sup 4-} infinite chains. Mutually perpendicular chains are hung on each side of the sheets to build frameworks with non-crossing perpendicular channels that accommodate the lithium ions. Various stacking sequences of the S and D layers, S-S, D-D and S-D, generate three different frameworks in 1, 2 and 3, respectively. These compounds are similar to the recently reported vanadate analogous. However, the phosphate tetrahedra, smaller than the vanadate ones, gives distortion of the layers and a lowering of the symmetry and/or a change of periodicity. The electrical conductivity of 1 and 2 was measured using impedance spectroscopy method. The rather low conductivity of the lithium cations is explained by the crystal structure and the Li{sup +} position within the tunnels. These results corroborate those on the analogous three-dimensional alkaline uranyl vanadates. Crystallographic data: 293 K, BRUKER X8-APEX2 X-ray diffractometer, 4 K CCD detector, MoKalpha, lambda=0.71073 A, full-matrix least-squares refinement on the basis of F. 1, Tetragonal symmetry, space group I4{sub 1}/amd, Z=4 with a=7.1109(2) A and c=25.0407(8) A, R=0.034 and wR=0.047 for 38 parameters with 479 independent reflections with I>=3sigma(I). 2, monoclinic symmetry, space group P2{sub 1}/c, Z=4 and a=9.8829(2) A, b=9.8909(2) A, c=17.4871(4) A and beta=106.198(1){sup o}, R=0.021 and wR=0.031 for 249 parameters with 4201 independent reflections with I>=3sigma(I). 3, Tetragonal symmetry, space group P4-bar2{sub 1}m with a=9.9305(2) A and c=14.5741(3) A, R=0.035 and wR=0.038 for 137 parameters with 4527 independent reflections with i>=3sigma(I). - Graphical abstract: The three new lithium uranyl phosphates Li{sub 2}(UO{sub 2}){sub 3}(PO{sub 4}){sub 2}O, Li(UO{sub 2}){sub 4}(PO{sub 4}){sub 3} and Li{sub 3}(UO{sub 2}){sub 7}(PO{sub 4}){sub 5}O were synthesised via solid state reaction. The structures of these compounds are based upon three-dimensional open-frameworks built from {sub i}nfinity{sup 1}[UO{sub 5}]{sup 4-} chains connected through two types of layers, S and D, in the sequences S-S, D-D and S-D, respectively. The lithium atoms distribution along the channels induces various distortions of the {sub i}nfinity{sup 1}[UO{sub 5}]{sup 4-} chains.

36 MATERIALS SCIENCE↗

MAS-NMR investigations of the crystallization behaviour of lithium aluminum silicate (LAS) glasses containing P{sub 2}O{sub 5} and TiO{sub 2} nucleants

Lithium aluminum silicate (LAS) glass of composition (mol%) 20.4Li{sub 2}O-4.0Al{sub 2}O{sub 3}-68.6SiO{sub 2}-3.0K{sub 2}O-2.6B{sub 2}O{sub 3}-0.5P{sub 2}O{sub 5}-0.9TiO{sub 2} was prepared by melt quenching. The glass was then nucleated and crystallized based on differential thermal analysis (DTA) data and was characterized by {sup 29}Si, {sup 31}P, {sup 11}B and {sup 27}Al MAS-NMR. XRD and {sup 29}Si NMR showed that lithium metasilicate (Li{sub 2}SiO{sub 3}) is the first phase to c form followed by cristobalite (SiO{sub 2}) and lithium disilicate (Li{sub 2}Si{sub 2}O{sub 5}). {sup 29}Si MAS-NMR revealed a change in the network structure already for the glasses nucleated at 550 {sup o}C. Since crystalline Li{sub 3}PO{sub 4}, as observed by {sup 31}P MAS-NMR, forms concurrently with the silicate phases, we conclude that crystalline Li{sub 3}PO{sub 4} does not act as a nucleating agent for lithium silicate phases. Moreover, {sup 31}P NMR indicates the formation of M-PO{sub 4} (M=B, Al or Ti) complexes. The presence of BO{sub 3} and BO{sub 4} structural units in all the glass/glass-ceramic samples is revealed through {sup 11}B MAS-NMR. B remains in the residual glass and the crystallization of silicate phases causes a reduction in the number of alkali ions available for charge compensation. As a result, the number of trigonally coordinated B (BO{sub 3}) increases at the expense of tetrahedrally coordinated B (BO{sub 4}). The {sup 27}Al MAS-NMR spectra indicate the presence of tetrahedrally coordinated Al species, which are only slightly perturbed by the crystallization. - Graphical abstract: {sup 11}B MAS-NMR spectra of LAS glass heat treated at different temperatures, showing the evolution of the residual glass matrix during the crystallization treatment. High-field (18.8 T) NMR enables us to record high resolution spectra, from which the glass network modifications could be related to the formation of intermediate lithium silicate crystalline phases.

36 MATERIALS SCIENCE↗

Microstructure evolution of Li uptake/removal in MoO{sub 2}@C nanoparticles with high lithium storage performance

Highlights: • The carbon-coated MoO{sub 2} (MoO{sub 2}@C) ultra fine nanoparticles are synthesized by one-pot hydrothermal method. • MoO{sub 2}@C nanoparticles have high specific capacity, excellent cycling performance and rate performance. • Phase transformations for lithium ion uptake/removal are examined carefully by TEM. • Phase transformations are highly reversible during the redox process. - Abstract: A facile one pot strategy of a hydrothermal methodology was applied to synthesize the carbon coated MoO{sub 2} (MoO{sub 2}@C) nanostructured particles, which are composed of ultra fine nanoparticles with homogeneous carbon coating about several nanometers. As an electrode in lithium ion batteries, the MoO{sub 2}@C shows a high specific capacity and reversible capacity (730 mA h g{sup −1} after 60 cycles). Microstructure investigations, by using a high resolution transmission electron microscopy, of the MoO{sub 2}@C based electrodes employed at various states during the first discharge/charge cycle were conducted to elucidate the lithium ion uptake/removal mechanism and cycling behavior. In the lithium uptake process, the original MoO{sub 2} phase transfers into Li{sub 0.98}MoO{sub 2} through an addition type reaction, and then nanosized metallic Mo emerges as a result of a conversion reaction. In turn, Mo could be oxidized to the intermediate Li{sub 0.98}MoO{sub 2} before converting to hyperfine MoO{sub 2} phase on upcoming lithium removal process.

36 MATERIALS SCIENCE↗

A dual strategy for improving lithium storage performance, a case of Fe{sub 2}O{sub 3}

Graphical abstract: The α-Fe{sub 2}O{sub 3} nanoellipse with180–230 nm (edge length) and 140–170 nm (edge width) has been synthesize and tested as anode material for LIBs. The α-Fe{sub 2}O{sub 3} nanoellipse electrode with sodium alginate (SA) binder exhibits greatly enhanced performance for lithium storage. - Highlights: • α-Fe{sub 2}O{sub 3} nanoellipses were fabricated by a simple hydrothermal method with glycine. • The elliptical α-Fe{sub 2}O{sub 3}-SA electrode exhibits enhanced lithium storage performance. • The reason for the enhanced performance of elliptical α-Fe{sub 2}O{sub 3}-SA was investigated. - Abstract: In this paper, we developed a dual strategy, the nanostructure engineering of active material and the proper choice of binder, to achieve excellent lithium storage performance of transition metal oxides. α-Fe{sub 2}O{sub 3} nanoellipses with a mean size of 180–230 nm (edge length) and 140–170 nm (edge width) were fabricated by a simple hydrothermal method in the presence of glycine. When tested as anode material for lithium ion batteries (LIBs), the α-Fe{sub 2}O{sub 3} nanoellipse electrode with sodium alginate (SA) binder exhibits greatly enhanced performance for lithium storage. The capacity could be retained as high as 1164 mA h g{sup −1} at a current density of 100 mA g{sup −1} for over 60 cycles. Even cycled at high current densities of 2000–5000 mA g{sup −1}, high capacities of 443–628 mA h g{sup −1} can be achieved, whereas the electrode with the conventional poly(vinylidene fluoride) (PVDF) binder suffers from rapid capacity decay under the same test conditions.

36 MATERIALS SCIENCE↗

A Novel Zwitterionic Chromatography Approach to Separate Lithium from Unconventional Resources

Lithium (Li) is a key element for clean energy technologies, and, accordingly, the global lithium demand has been increasing rapidly. Therefore, to meet the Li demand and maintain supply chain stability, it is critical to develop efficient lithium extraction technologies that allow exploitation of unconventional lithium resources, such as geothermal brines and inland brine streams. However, the recovery of Li from these resources is challenging due to low Li concentration, low ratios of Li/Na, Li/Mg, or Li/Ca, and complex feed compositions. To address this, we introduced a new Direct Lithium Extraction (DLE) process using Zwitterionic Chromatography (ZIC) to separate Li from other salts. Since salts are partitioned on ZIC under water elution, no reagent chemicals are needed, and the Li separation is not limited by the adsorption capacity. We prepared 13 different zwitterionic (ZI) resins to investigate the salt retention on various ZI groups and then screened out promising sorbents for efficient Li separation. It was found that salt retention was synergistically affected by the pore size and ZI configurations. Using carboxybetaine (QAC3CA) sorbents, multicomponent separations showed that Li can be partitioned from divalent salts or Na with selectivities of 1.8 or 1.9, respectively. Although the selectivity is relatively low, in real brine tests, Li was separated from Ca and Mg with 79.2 % yield, showing the potential for a continuous process to achieve high productivity and high yield. Simulation studies suggest the salt elution mechanism is related to the hydration reaction energy and the effective hydrated radius of cations.

critical minerals↗

Hydrometallurgical recovery of metal values from sulfuric acid leaching liquor of spent lithium-ion batteries

Highlights: • Selective precipitation and solvent extraction were adopted. • Nickel, cobalt and lithium were selectively precipitated. • Co-D2EHPA was employed as high-efficiency extraction reagent for manganese. • High recovery percentages could be achieved for all metal values. - Abstract: Environmentally hazardous substances contained in spent Li-ion batteries, such as heavy metals and nocuous organics, will pose a threat to the environment and human health. On the other hand, the sustainable recycling of spent lithium-ion batteries may bring about environmental and economic benefits. In this study, a hydrometallurgical process was adopted for the comprehensive recovery of nickel, manganese, cobalt and lithium from sulfuric acid leaching liquor from waste cathode materials of spent lithium-ion batteries. First, nickel ions were selectively precipitated and recovered using dimethylglyoxime reagent. Recycled dimethylglyoxime could be re-used as precipitant for nickel and revealed similar precipitation performance compared with fresh dimethylglyoxime. Then the separation of manganese and cobalt was conducted by solvent extraction method using cobalt loaded D2EHPA. And McCabe–Thiele isotherm was employed for the prediction of the degree of separation and the number of extraction stages needed at specific experimental conditions. Finally, cobalt and lithium were sequentially precipitated and recovered as CoC{sub 2}O{sub 4}⋅2H{sub 2}O and Li{sub 2}CO{sub 3} using ammonium oxalate solution and saturated sodium carbonate solution, respectively. Recovery efficiencies could be attained as follows: 98.7% for Ni; 97.1% for Mn, 98.2% for Co and 81.0% for Li under optimized experimental conditions. This hydrometallurgical process may promise a candidate for the effective separation and recovery of metal values from the sulfuric acid leaching liquor.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Non-aqueous Electrolytes for High Voltage Lithium Ion Batteries

Lithium ion batteries to power plug-in hybrid electrical vehicles (PHEV) must store more energy per unit volume and weight, and be capable of undergoing many thousands of charge/discharge cycles. The existing battery technologies have serious limitations such as high cost, limited capacity and lifetime. One way to significantly increase the energy storage capacity of lithium ion batteries is to increase cell voltage by using high voltage cathode materials. For example, the LiNi1/3Mn1/3Co1/3O2 (NMC) system has a capacity of ca. 170 mAh/g when charging to 4.3 V vs. Li+/Li. Increasing the voltage results in a significant increase in capacity with values to 200 mAh/g at 4.5 V and approaching 250 mAh/g at even higher potentials. However, most of the current electrolytes are not stable at such high voltages and lead to fast fade in battery capacity. Therefore, electrolytes capable of enduring high voltages are required for the next generation of lithium ion batteries. It is well known that electrolyte components - salt, solvents and additives, are critical to the success of lithium ion batteries in high energy and power applications. Such electrolyte components and their compositions have large effects on the properties and performances of the final electrolytes and batteries containing them. In this paper, the electrochemical properties and performances of non-aqueous electrolytes containing the state-of-the-art solvents and lithium salts will be investigated. The combination of a high voltage cathode and the high voltage stable electrolyte will be evaluated and presented.

25 ENERGY STORAGE↗

Interlayer Design for Halide Electrolytes in All‐Solid‐State Lithium Metal Batteries

Abstract All‐solid‐state lithium‐metal batteries (ASSLMBs) are promising for transportation electrification due to their superior safety and high energy density. Lithium halide electrolytes provide excellent processing flexibility, high ionic conductivity, and anodic stability (>4.1 V), making them highly compatible with high‐voltage cathodes, surpassing sulfide electrolytes (<2.1 V). Nevertheless, halide electrolytes suffer from low cathodic stability and form an electronically conductive interphase with lithium, resulting in a critical current density (CCD) of nearly zero. Herein, Li 3 YbCl 6 electrolytes are synthesized that are kinetically stable with lithium by forming an electronic insulating solid electrolyte interphase. Guided by critical overpotential criteria, a PI 3 interlayer is designed that transforms into Li 6 PI 3 upon contact with lithium, substantially reducing the interfacial resistance of Li 3 YbCl 6 against lithium to 34 Ω and achieving a high critical overpotential of 114 mV. By substituting Yb with Lu, Li 3 LuCl 6 electrolytes with Li 6 PI 3 interlayers reach a CCD of 1.0 mA cm −2 at a capacity of 1.0 mAh cm −2 , comparable to sulfide electrolytes but with higher oxidation stability. Additionally, Li 6 PI 3 enables stable cycling of Li//Li cells with Li 3 LuCl 6 electrolytes at 0.5 mA cm −2 for 400 cycles and maintains 86.5% capacity in Li//LiCoO 2 cells after 220 cycles at 30 °C, paving the way for high‐performance ASSLMBs.

Chemistry↗

Identifying Hidden Li–Si–O Phases for Lithium‐Ion Batteries via First‐Principle Thermodynamic Calculations

SiO–based materials are promising alloys and conversion‐type anode materials for lithium‐ion batteries and are recently found to be excellent dendrite‐proof layers for lithium‐metal batteries. However, only a small fraction of the Li–Si–O compositional space has been reported, significantly impeding the understanding of the phase transition mechanisms and the rational design of these materials both as anodes and as protection layers for lithium‐metal anodes. Herein, we identify three new thermodynamically stable phases within the Li–Si–O ternary system (Li 2 SiO 5 , Li 4 SiO 6, and Li 4 SiO 8 ) in addition to the existing records via first‐principle calculations. The electronic structure simulation shows that Li 2 SiO 5 and Li 4 SiO 8 phases are metallic in nature, ensuring high electronic conductivity required as electrodes. Moduli calculations demonstrate that the mechanical strength of Li–Si–O phases is much higher than that of lithium metal. The diffusion barriers of interstitial Li range from 0.1 to 0.6 eV and the interstitial Li hopping serves as the dominating diffusion mechanism in the Li–Si–O ternary systems compared with vacancy diffusion. These findings provide a new strategy for future discovery of improved alloying anodes for lithium‐ion batteries and offer important insight towards the understanding of the phase transformation mechanism of alloy‐type protection layers on lithium‐metal anodes.

Qu, Jiale↗

Liquid lithium applications for solving challenging fusion reactor issues and NSTX-U contributions

Steady-state fusion reactor operation presents major divertor technology challenges, including high divertor heat flux both steady-state and transients. In addition to those issues, there are unresolved issues of long term dust accumulation and associated tritium inventory and safety issues. It has been suggested that radiative liquid lithium divertor concepts with a modest lithium-loop could provide a possible solution for these outstanding fusion reactor technology issues while potentially improving the reactor plasma performance. The application of lithium (Li) in NSTX resulted in improved H-mode confinement, H-mode power threshold reduction, and reduction in the divertor peak heat flux while maintaining essentially Li-free core plasma operation even during H-modes. These promising results in NSTX and related modeling calculations motivated the radiative liquid lithium divertor (RLLD) concept and its variant, the active liquid lithium divertor concept (ARLLD), taking advantage of the enhanced Li radiation in relatively poorly confined divertor plasmas. It was estimated that only a few moles/sec of lithium injection would be needed to significantly reduce the divertor heat flux in a tokamak fusion power plant. By operating at lower temperatures ≤ 500°C than the first wall ~ 600 – 700°C, the LL-covered divertor chamber wall surfaces can serve as an effective particle pump, as impurities generally migrate toward lower temperature LL divertor surfaces. To maintain the LL purity, a closed LL loop system with a modest circulating capacity of ~ 1 liter/second (l/sec) is envisioned to sustain the steady-state operation of a 1 GW-electric class fusion power plant. By running the Li loop continuously, it can carry the dust particles and impurities generated in the vacuum vessel to outside where the dust / impurities are removed by relatively simple filter and cold/hot trap systems. Using a cold trap system, it can recover in tritium (T) in real time from LL at a rate of ~ 0.5 g / sec needed to sustain the fusion reaction while minimizing the T inventory issue. With an expected T fraction of ≤ 0.7 %, an acceptable level of T inventory can be achieved. In NSTX-U, preparations are now underway to elucidate the physics of Li plasma interactions with a number of Li application tools and Li radiation spectroscopic instruments. The NSTX-U Li evaporator which provides Li coating over the lower divertor plate, can offer important information on the RLLD concept, and the Li granule injector will test some of the key physics issue on the ARLLD concept. A LL-loop is also being prepared off line for prototyping future use on NSTX-U.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of charged interfaces on electrolyte decomposition at the lithium metal anode

Lithium–Sulfur batteries are promising candidates to substitute conventional Li-ion batteries due to their higher energy density and reduced cost. However, several challenges related to the reactivity of the lithium metal anode have prevented this technology from becoming broadly commercialized. Lithium's high reactive nature leads to the continuous decomposition of the electrolyte and the formation of the solid-electrolyte interphase (SEI) layer. Thus, a comprehensive understanding of how the SEI film is formed is crucial to help elucidate improvements for this battery technology. In this work, we use density functional theory (DFT) based computational methods to investigate the effect of charged interfaces on the electrolyte degradation at the lithium anode. Here, several electrolyte mixtures were considered including 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL) as solvents, and lithium bis(fluorosulfonyl)imide (LiFSI) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as salts. It is found that the extent of salt decomposition is higher when the interface is charged. In addition, two types of solvent reduction mechanisms are identified: C–O bond cleavage and radical attacks. Charge transfer and evolution analysis are characterized in detail. Finally, solvent decomposition reactions are found to become more thermodynamically favorable and their activation barriers to be diminished under the effect of constant potentials and electric fields.

25 ENERGY STORAGE↗