SEARCH · Engineering Papers

Results for “Jet Surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

All sources NASA NTRS DOE OSTI

NASA NTRS1937

Experimental Investigation of Wind-Tunnel Interference on the Downwash Behind an Airfoil

The interference of the wind-tunnel boundaries on the downwash behind an airfoil has been experimentally investigated and the results have been compared with the available theoretical results for open-throat wind tunnels. As in previous studies, the simplified theoretical treatment that assumes the test section to be an infinite free jet has been shown to be satisfactory at the lifting line. The experimental results, however, show that this assumption may lead to erroneous conclusions regarding the corrections to be applied to the downwash in the region behind the airfoil where the tail surfaces are normally located. The results of a theory based on the more accurate concept of the open-jet wind tunnel as a finite length of free jet provided with a closed exit passage are in good qualitative agreement with the experimental results.

Silverstein, Abe↗

NASA NTRS2017

Comprehensive Measurement of Microbial Burden in Nutrient-Deprived Cleanrooms

Spacecraft surfaces that are destined to land on potential life-harboring celestial bodies are required to be rigorously cleaned and continuously monitored for spore bioburden as a proxy for spacecraft cleanliness. The NASA standard spore assay (NSA), used for spacecraft bioburden estimates, specifically measures spores that are cultivable, aerobic, resistant to heat shock, and grow at 30˚C in a nutrient-rich medium. Since the vast majority of microorganisms cannot be cultivated using the NSA assay, it is necessary to utilize state-of-the art molecular techniques to better understand the presence of all viable microorganisms, not just those measured with the NSA. In this study, the nutrient-deprived low biomass cleanrooms, where spacecraft are assembled, were used as a surrogate to spacecraft surfaces to measure the ratio of NSA spores in relation to the total viable microorganism population to compare with a 2006 space studies report that estimates that for every 1 spore there is approximately 50,000 viable organisms. Ninety-eight surface wipe samples were collected from the spacecraft assembly facility (SAF) cleanroom at the Jet Propulsion Laboratory (JPL) over a 6-month period. The samples were processed and analyzed using classical microbiology along with molecular assays. Traditional microbiology plating methods were used to determine the cultivable bacterial, fungal, and spore populations. Molecular assays were used to determine the total organisms (TO, dead and live) and the viable organisms (VO, live). The TO was measured using adenine triphosphate (ATP) and quantitative polymerase chain reaction (qPCR) assays. The VO was measured using internal ATP, propidium monoazide (PMA)-qPCR, and flow cytometry (after staining for viable microorganisms) assays. Based on the results, it was possible to establish a ratio between spore counts and VO for each viability assay. The ATP based spore to VO ratio ranged from 149 – 746 and the bacterial PMA-qPCR assay based ratio ranged from 314 – 1491 VO. The most conservative estimate came from FACS, which estimated the ratio to be 12,091 VO per 1 NSA spore. Since archaeal (<1%) and fungal (~2%) populations were negligible, the spore to VO ratios were based on bacterial population estimates. The most conservative ratio from this study can be used as a replacement for the SSB estimate on nutrient-deprived (oligotrophic) desiccated spacecraft surfaces, to estimate the VO from NSA measurements without utilizing state-of-the art molecular methods that are costly and require more biomass than is typically found of spacecraft surfaces.

Venkateswaran, Kasthuri↗

DOE OSTI2026

Time-, space-, and molecule-resolved multiple plasma reactive species in complex settings using an innovative approach of cavity ringdown spectroscopy (Project Final Report)

The primary research goal of this 2-year project is to demonstrate the feasibility of an innovative approach to measure reactive plasma species in the most challenging settings: right on the surface of water and under water. We propose to use the Brewster angle-cavity ringdown spextroscopy (BA-CRDS). Research objectives include: 1) Measurements of OH and NO in the plasma gas-phase zone (Z1) using different types of LTP sources including continuous and pulsed plasma jets, sheets, torches, etc. 2) Measurements of OH and NO in the multiphase reaction zones, right on the surface of water (Z2) and under water (Z3). 3) RS formation and loss mechanisms and reaction dynamics in the three zones. 4) Generalization of the proposed system to be configurable with other selected innovative techniques for other LTP parameters; invitation of selected PIs to form a strong collaborative team to pursue the follow-up effort (Category-2).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS2017

A Ratio of Spore to Viable Organisms: A Case Study of the JPL-SAF Cleanroom

Spacecraft surfaces that are destined to land on potential life-harboring celestial bodies are required to be rigorously cleaned and continuously monitored for spore bioburden as a proxy for spacecraft cleanliness. The NASA standard assay (NSA), used for spacecraft bioburden estimates, specifically measures spores that are cultivable, aerobic, resistant to heat shock, and grow at 30 C in a nutrient-rich medium. Since the vast majority of microorganisms cannot be cultivated using the NSA, it is necessary to utilize state-of-the art molecular techniques to better understand the presence of all viable microorganisms, not just those measured with the NSA. In this study, the nutrient-deprived low biomass cleanrooms, where spacecraft are assembled, were used as a surrogate for spacecraft surfaces to measure the ratio of NSA spores in relation to the total viable microorganism population in order to make comparisons with the 2006 Space Studies Board (SSB) estimate of 1 spore per approximately 50,000 viable organisms. Ninety-eight surface wipe samples were collected from the Spacecraft Assembly Facility (SAF) cleanroom at the Jet Propulsion Laboratory (JPL) over a 6-month period. The samples were processed and analyzed using classical microbiology along with molecular methodology. Traditional microbiology plating methods were used to determine the cultivable bacterial, fungal, and spore populations. Molecular assays were used to determine the total organisms (TO, dead and live) and the viable organisms (VO, live). The TO was measured using adenosine triphosphate (ATP) and quantitative polymerase chain reaction (qPCR) assays. The VO was measured using internal ATP, propidium monoazide (PMA)-qPCR, and flow cytometry (after staining for viable microorganisms) assays. Based on the results, it was possible to establish a ratio between spore counts and VO for each viability assay. The ATP-based spore to VO ratio ranged from 149-746, and the bacterial PMA-qPCR assay-based ratio ranged from 314-1,491 VO, per spore. The most conservative estimate came from fluorescent-assisted cell sorting (FACS), which estimated the ratio to be 12,091 VO per 1 NSA spore. Since archaeal (less than 1%) and fungal (approximately 2%) populations were negligible, the spore to VO ratios were based on bacterial population estimates. The most conservative ratio from this study can be used as a replacement for the SSB estimate on nutrient-deprived (oligotrophic) desiccated spacecraft surfaces, to estimate the VO from NSA measurements without utilizing state-of-the art molecular methods that are costly and require more biomass than is typically found on spacecraft surfaces.

Hendrickson, Ryan↗

NASA NTRS2019

Surface Flow Visualization of the High-Lift Common Research Model

A 10% scale version of the High-Lift Common Research Model (CRM-HL) was tested in the NASA Langley 14- by 22-Foot Subsonic Tunnel (14x22) in support of the NASA Advanced Air Transport Technology (AATT) Project. The CRM-HL experiment included various configurations such as conventional and simple-hinged flaps, with and without engine nacelle/pylon, with and without nacelle chine, different Active Flow Control (AFC) methods (sweeping jets, alternating pulsed jets, and preconditioned boundary layer blowing), and their various parameters. This particular study is focused on the surface flow visualization of the conventional CRM-HL model at landing configuration. The conventional CRM-HL model with the single-slotted Fowler flap system serves as a baseline for the AFC-enabled simplified high-lift configuration as well as a high-lift technology development platform due to its publicly open geometry. Surface flow visualizations were performed using fluorescent minitufts, which were found to be nonintrusive to the aerodynamic performance. Tuft flow visualizations are supplemented with the relevant pressure and force measurements in order to understand the flow characteristics developed on the conventional CRM- HL model. In addition, three dimensional, unsteady, compressible Computational Fluid Dynamic (CFD) simulations were performed for selective cases. The surface streamlines and transverse velocity fluctuations obtained by the CFD simulations are qualitatively compared to the tuft direction and tuft unsteadiness, respectively. Force measurements of the CRM-HL model show performance degradation at higher angles of attack. Surface flow visualizations revealed the performance loss due to the nacelle/pylon wake that grows with angle of attack and eventually promotes flow separation over the inboard wing. This performance loss was successfully recovered by placing a chine on the engine nacelle.

Koklu, Mehti↗

NASA NTRS2014

Orion MPCV Continuum RCS Heating Augmentation Model Development

The reaction control system jets of the Orion Multi Purpose Crew Vehicle can have a significant impact on the magnitude and distribution of the surface heat flux on the leeside of the aft-body, when they are fired. Changes in surface heating are expressed in terms of augmentation factor over the baseline smooth body heating. Wind tunnel tests revealed heating augmentation factors as high as 13.0, 7.6, 2.8, and 5.8 for the roll, pitch down, pitch up, and yaw jets respectively. Heating augmentation factor models, based almost exclusively on data from a series of wind tunnel tests have been developed, for the purposes of thermal protection system design. The wind tunnel tests investigated several potential jet-to-freestream similarity parameters, and heating augmentation factors derived from the data showed correlation with the jet-to-freestream momentum ratio. However, this correlation was not utilized in the developed models. Instead augmentation factors were held constant throughout the potential trajectory space. This simplification was driven by the fact that ground to flight traceability and sting effects are not well understood. Given the sensitivity of the reaction control system jet heating augmentation to configuration, geometry, and orientation the focus in the present paper is on the methodology used to develop the models and the lessons learned from the data. The models that are outlined in the present work are specific to the aerothermal database used to design the thermal protection system for the Exploration Flight Test 1 vehicle.

Heating Augmentation↗

NASA NTRS1992

Combustion of LOX with H2(sub g) under subcritical, critical, and supercritical conditions and experimental observation of dense spray and mixing of impinging jets

Progress made during the period of February 1 to October 15, 1992 is reported. The overall objective of Task 1 of the investigation is to achieve a better understanding of the combustion processes of liquid oxygen and gaseous hydrogen under subcritical, critical, and supercritical conditions. Specific objectives of the research program are: (1) to determine the evaporation- and burning-rate characteristics of LOX in hydrogen/helium environments under broad ranges of operating conditions; (2) to measure species concentration profile and surface temperature of LOX employing the gas chromatography and fine-wire thermocouples under non-reacting flow situations; (3) to perform a fugacity-based multicomponent thermodynamic phase equilibrium analysis for examining the high-pressure vapor-liquid equilibrium behavior at the liquid surface of LOX; (4) to formulate and solve a theoretical model for simulating the evaporation and combustion processes in a LOX/H2/He system; and (5) to validate the theoretical model with the measured experimental data. Task 2 of the investigation is described. Observation of a like-on-like injector element in the near-injector region performed in the previous phase of this project has identified the existence of a high Reynolds number regime in which the pre-impingement jets are fully turbulent and undergoing surface breakup. The new spray regime, which has not been observed by previous investigators, is characterized by the presence of many fine droplets and the disappearance of the well-defined liquid breakup wave pattern in the post-impingement region. It is speculated that a cavitating region may be present within the orifice so that it could induce strong turbulence, leading to an onset of atomization of the jets prior to impingement. To further investigate the dense spray behavior of the impinging jets in the high Reynolds number region, experiments were conducted using Plexiglas injector components for direct internal flow observation. The main objective is to determine under what conditions a cavitating region would form and whether or not the cavitation is reponsible for the development of the high Reynolds number spray regime. The procedure and major findings of the injector cavitation study are described.

Kuo, Kenneth K.↗

NASA NTRSDate not supplied

Unified Material-Environment Interaction Model for Binary UHTC Composites

A new model for the surface chemistry of zirconium and hafnium diborides containing silicon-carbide when exposed to high temperature conditions in air is formulated. Oxidation dynamics are simplified by considering the diffusion-limited equilibrium regime within the material at elevated temperatures. This model is first assessed against experimental mass-gain data taken from UHTC samples heated to high temperature in an oxygen environment. Then, further evaluations of the new model are conducted using hypersonic CFD simulations to analyze conditions experienced by HfB2-SiC in arc jet experiments conducted at NASA Ames Research Center. Measurements of stagnation point heat transfer and pressure are then used to calibrate the simulations. Results of coupled CFD-material response simulations are then compared to the surface temperatures measured during the Ames arc jet test. Results support the use of the proposed model while highlighting the need for improved gas-phase data on the additional constituents considered.

ultra high temperature ceramic↗

NASA NTRS1973

Shock remagnetization associated with meteorite impact at planetary surfaces

The stages of a cratering event are considered together with four distinct magnetization volumes, taking into account the jetted material, the ejecta, the impact melt, and shock-compressed material which remains in situ. Shock classifications are discussed along with mineralogical aspects of shock remagnetization, the behavior of iron sulfides, defect cubic spinels, ilmenite-hematite series, the Fe-Ti-O system, alloys phases, and silicates. Remagnetization mechanisms considered include a first order reversible crystallographic transition in bcc iron-nickel, a second order Curie point transition in fcc iron-nickel, shock-induced anisotropy, and shock melting of iron containing silicates. Experimental results are reported together with a hypothetical crater model.

Wasilewski, P. J.↗

DOE OSTI2022

Binder jet additive manufacturing of ceramic heat exchangers for concentrating solar power applications with thermal energy storage in molten chlorides

Triply periodic minimal surface (TPMS) geometries can only be fabricated by additive manufacturing methods and are of interest for heat exchangers. Ceramic TPMS heat exchangers can operate at higher temperatures and pressures with superior performance and increased operating efficiencies compared to metal heat exchangers. The properties of ultra-high temperature ceramic (UHTC) materials are also favorable for heat exchangers and potentially suited to concentrated solar power (CSP) systems, such as those based on a molten chloride salt thermal energy storage (TES) medium used to heat CO 2 in a closed-loop Brayton power cycle. We intended to demonstrate binder jet additive manufacturing feasibility of a UHTC-TPMS structure by printing and sintering a null candidate. We aimed to achieve parts with a relative density ≥ 92 % of theoretical and to provide a TPMS part demonstration. The target density indicates the transition from intermediate to final stage sintering, a requirement to inhibit gas permeability and for sintering complex near net shapes to full density with sinter-HIP technology. The goal of the TPMS part demonstration was to determine if printing and sintering parameters developed from test coupons apply to the complex geometries that will eventually be used in a heat exchanger design. Our objective was to print cubic TPMS parts with a 9 cm 3 volume and sinter it without distorting and cracking. We report we were able to sinter ZrB 2 -MoSi 2 composite parts based on the Schwarz-D TPMS and achieve isotropic shrinkage up to 60 % by volume, resulting in densities ranging from 92 % to 96 % of theoretical.

36 MATERIALS SCIENCE↗

NASA NTRS1975

Acoustical modeling study of the open test section of the NASA Langley V/STOL wind tunnel

An acoustic model study was carried out to identify effective sound absorbing treatment of strategically located surfaces in an open wind tunnel test section. Also an aerodynamic study done concurrently, sought to find measures to control low frequency jet pulsations which occur when the tunnel is operated in its open test section configuration. The acoustical modeling study indicated that lining of the raised ceiling and the test section floor immediately below it, results in a substantial improvement. The aerodynamic model study indicated that: (1) the low frequency jet pulsations are most likely caused or maintained by coupling of aerodynamic and aeroacoustic phenomena in the closed tunnel circuit, (2) replacing the hard collector cowl with a geometrically identical but porous fiber metal surface of 100 mks rayls flow resistance does not result in any noticable reduction of the test section noise caused by the impingement of the turbulent flow on the cowl.

Ver, I. L.↗

NASA NTRS1982

Characterization and degradation studies on synthetic polymers for aerospace application

The anti-misting additive for jet fuels known as FM-9 (proprietary polymer) was characterized by elemental analysis, solubility studies and molecular weight determination. Physical properties of surface tension, viscosity, specific gravity and other physical parameters were determined. These results are compared with properties of polyisobutylene and fuels modified with the same; the misting characteristics of polyisobutylene and FM-9 in Jet A fuel are included. Characterization and degradation of phthalocyanine and its derivatives were accomplished by use of a mass spectrometer and a pyroprobe solid pyrolyzer. Metal phthalocyanine tetracarboxylic acids and phthalocyanine-tetraamine cured epoxies were studied. Epoxy/graphite composite panels were exposed to a NASA-Ames radiant panel fire simulator in the flaming and non-flaming modes; toxic gases of HCN and HZS were measured along with oxygen, Co2, Co, and organic gases.

Hsu, M. T. S.↗

NASA NTRS2012

Astrobiological Journeys to and from the South Polar Sea of Enceladus - Bidirectional Interactions with the Saturn Magnetosphere

The spectacularly cryovolcanic moon Enceladus is a major source of plasma for the Saturn magnetosphere via ionization of the ejected molecular species and ice grains. Field-aligned plasma flows from the Enceladus environment visibly impact the moon's magnetic footpoint in Saturn's polar auroral region, while water group and other ions from the moon emissions diffuse radially throughout the magnetosphere and may be the dominant source of oxygen for Titan's oxygen-poor upper atmosphere. But the moon-magnetosphere interaction is bidirectional in the sense that the moon surface is globally exposed to constant irradiation by the returning magnetospheric ions and by energetic electrons from the field-aligned and radially diffusing populations. The returning ion source operates both on global scales of the magnetosphere and locally for highly reactive species produced in the ejecta plume. All of these sources likely combine to produce a highly oxidized global surface layer. Since plasma electrons and ions are cooled by interaction with neutral gas and E-ring ice grains from Enceladus, the moon emissions have a governing effect on the seed populations of energetic particles that irradiate the surface. The proposed subsurface polar sea and transient crustal overturn in the south polar region could bring the polar surface oxidants into contact with hydrocarbons and ammonia to make oxidation product gases contributing to the cryovolcanic jets, a process first proposed by Cooper et al. (Plan. Sp. Sci., 2009). As has been previously suggested for Europa, the 'oxidants could contribute to enhanced astrobiological potential of Enceladus, perhaps even higher than for Europa where organic hydrocarbons have not yet been directly detected. Unlike Europa, Enceladus shows no sign of an oxygen-dominated exosphere that could otherwise be indicative of extreme surface and interior oxidation inhibiting the detectable survival and evolution of complex organics.

Cooper, John F.↗

DOE OSTI2021

Winter precipitation changes in California under global warming: Contributions of CO2, uniform SST warming, and SST change patterns

Climate models project a wetting winter over California, distinct from the drying in all other Mediterranean climate regions under warming. Dynamic effect via an eastward extension of the westerly jet stream over the North Pacific is the root cause for the wetting California. Utilizing four sets of prescribed-SST (sea surface temperature) simulations, the relative effects of direct CO2 radiative forcing, uniform SST warming, and SST change pattern are investigated. The wetting winter is dominated by uniform SST warming mainly through its effect on the jet extension. As a fundamental response to the enhanced upper-tropospheric warming in the tropics, the jet extension in coupled simulations is well reproduced under uniform SST warming and robust among models. An El Niño-like SST warming pattern has a secondary contribution to the jet extension via atmospheric teleconnection, but with large inter-model spread. Relative to the SST forcing, the direct CO2 radiative effect is negligible.

Dong, Lu↗

NASA NTRS2015

On the Sensitivity of the Diurnal Cycle in the Amazon to Convective Intensity

This presentation uses publicly available CERES and radiosonde data to investigate the sensitivity of thetropical convective diurnal cycle to atmosphere state. Averaging surface observations into regimes of convective intensitydefined by satellite shows great promise for physical understandingof convection.• Convective processes in the Amazon are highly variable seasonallyand locally.• Buoyancy/CIN more important JJA– Mesoscale/synoptic features easier to separate– Length/depth of buoyancy layer very important in DJF (EL).• Moisture more important DJF, esp. UTH– Humidity of lower atmosphere significantly impacts LTS, LCL and abilityfor parcels to reach LFC.• Lower level jet strength/direction important• Convective initiation correlated with LTS, LR, LTH, EL• Duration/Phase better correlated with humidity variables• Surface Flux amplitude well correlated with convection

Itterly, Kyle↗

DOE OSTI2022

Intense cyclic heating effects on thermo-fracture and thermal shock of solid tungsten and open-cell tungsten foam

Here we investigate here the effects of transient (cyclic) arc-jet plasma and laser heating on fracture behavior of W-foam and solid tungsten. The two key parameters that control the foam thermomechanical response are its density and mean cell size expressed in Pores Per Inch (PPI). Tungsten foam samples were fabricated with Chemical Vapor Deposition (CVD) with variety of PPI and relative density. These were tested under two types of qualitatively different conditions: (1) high-enthalpy arc-jet, and (2) high-power cyclic laser heating. None of the foam samples showed macroscopic through-thickness cracks. However, distributed micro-cracks were observed on ligaments and their triple junctions. Under the same loading conditions, W-foam and solid tungsten showed similar crack network pattern and characteristic length-scale. However, Crack Opening Displacement (COD) was twice as large in solid W as compared to W-foam. Foam samples that have been previously exposed to a low-pressure helium plasma showed significant changes in their surface forming nano-texture fuzz which was removed by subsequent testing in the arc-jet. Extensive fracture and re-crystallization were observed in the thin solid W disk that was fully-constrained from expansion. Thicker and fully-constrained solid W disks did not display recrystallization, grain growth, and extensive cracking. However, thicker disks that were free to expand showed some recrystallization and extensive through-thickness cracks due to less effective cooling and thus higher temperatures. Laser beam testing showed no visible damage formation at 0.19 GW/m 2 and 0.38 GW/m 2 for both low-density (23%) and high-density (43%) foams at low pulses (100-1000). Micro-cracks were observed after 10,000 pulses at 0.19 GW/m 2 in both foams, and in low-density foam after 100,000 at 0.38 GW/m 2 . The nature of thermomechanical damage in W-foam exposed to extreme power (GW/m 2 ) short-duration laser pulses was found to be qualitatively similar to that of high power (MW/m 2 ) long-duration arc-jet.

36 MATERIALS SCIENCE↗

NASA NTRS1975

Influence of multitube mixer nozzle geometry on CTOL-OTW jet noise shielding

Acoustic shielding benefits for CTOL over-the-wing (OTW) applications were obtained experimentally with various multitube nozzles using a simple board to represent a wing. Eight nozzles consisting of three to thirteen 2.36-cm diameter tubes were tested. The nozzles included single and double rings of tubes. Shielding surface lengths of 15.0 to 54.4 cm were used with each nozzle. Far-field noise data were obtained at 90 deg from the jet axis and with a nominal jet exhaust velocity of 200 m/sec. The jet noise shielding benefits for the nozzles with double rows of tubes, in terms of sound pressure level spectra, are correlated successfully as a function of an earlier developed parameter for nozzles with a single ring of tubes that includes consideration of the number of tubes and the local peak velocity in the flow field at the trailing edge of the shielding surface.

Vonglahn, U.↗

NASA NTRS1975

Influence of multitube mixer nozzle geometry on CTOL-OTW jet noise shielding

Von Glahn, U.↗