Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Graphite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Physics Studies for the LBNF Graphite Target Design

We present the simulated physics performance of the Long-Baseline Neutrino Facility (LBNF) graphite target that is being designed by the RAL High Power Targets Group for the Deep Underground Neutrino Experiment (DUNE). We first compare three conceptual cylindrical target design options as a function of target length (up to 2.2 m): downstream supported, two individual targets and an upstream-supported cantilever. Choosing the cantilever design as the baseline, we show the effect of widening the upstream inner conductor of the first focusing horn to provide extra space for supporting the target. We also give estimates of the expected performance of the 1.5 m prototype and 1.8 m production cantilevered targets. Furthermore, we show the effects of the main engineering updates made to the other two focusing horns since the DUNE TDR.

43 PARTICLE ACCELERATORS↗

Type A Verification Report for the Brookhaven Graphite Research Reactor Engineered Cap, Brookhaven National Laboratory Upton, New York

The Oak Ridge Institute for Science and Education (ORISE) has reviewed the project documentation and data for the Brookhaven Graphite Research Reactor (BGRR) Engineered Cap at Brookhaven National Laboratory (BNL) in Upton, New York. The Brookhaven Science Associates (BSA) have completed removal of affected soils and performed as-left surveys by BSA associated with the BGRR Engineered Cap. Sample results have been submitted, as required, to demonstrate that remediation efforts comply with the cleanup goal of {approx}15 mrem/yr above background to a resident in 50 years (BNL 2011a).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Experimental Plan for EDF Energy Creep Rabbit Graphite Irradiations- Rev. 2 (replaces Rev. 0 ORNL/TM/2013/49)

The experimental results obtained here will assist in the development and validation of future models of irradiation induced creep of graphite by providing the following data: Inert creep stain data from low to lifetime AGR fluence Inert creep-property data (especially CTE) from low to lifetime AGR fluence Effect of oxidation on creep modulus (by indirect comparison with experiment 1 and direct comparison with experiment 3 NB. Experiment 1 and 3 are not covered here) Data to develop a mechanistic understanding, including: appropriate creep modulus (including pinning and high dose effects on structure), investigation of CTE-creep strain behavior under inert conditions oInformation on the effect of applied stress/creep strain on crystallite orientation (requires XRD), effect of creep strain on micro-porosity (requires tomography & microscopy) This document describes the experimental work planned to meet the requirements of project technical specification and EDF Energy requests for additional Pre-IE work. The PIE work is described in detail in this revision (Section 8 and 9).

Burchell, Timothy D.↗

Neutron Reference Benchmark Field Specifications: ACRR Polyethylene-Lead-Graphite (PLG) Bucket Environment (ACRR-PLG-CC-32-CL)

This report was put together to support the International Atomic Energy Agency (IAEA) REAL- 2016 activity to validate the dosimetry community’s ability to use a consistent set of activation data and to derive consistent spectral characterizations. The report captures details of integral measurements taken in the Annular Core Research Reactor (ACRR) central cavity with the Polyethylene-Lead-Graphite (PLG) bucket, reference neutron benchmark field. The field is described and an “a priori” calculated neutron spectrum is reported, based on MCNP6 calculations, and a subject matter expert (SME) based covariance matrix is given for this “a priori” spectrum. The results of 37 integral dosimetry measurements in the neutron field are reported.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Radiation Characterization Summary: ACRR Polyethylene-Lead-Graphite (PLG) Bucket Located in the Central Cavity on the 32-Inch Pedestal at the Core Centerline (ACRR-PLG-CC-32-cl).

This document presents the facility-recommended characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields in the Annular Core Research Reactor (ACRR) for the polyethylene-lead-graphite (PLG) bucket in the central cavity on the 32-inch pedestal at the core centerline. The designation for this environment is ACRR-PLG-CC-32-cl. The neutron, prompt gamma-ray, and delayed gamma-ray energy spectra, uncertainties, and covariance matrices are presented as well as radial and axial neutron and gamma-ray fluence profiles within the experiment area of the bucket. Recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulse operations are presented with conversion examples. Acknowledgements The authors wish to thank the Annular Core Research Reactor staff and the Radiation Metrology Laboratory staff for their support of this work. Also thanks to David Ames for his assistance in running MCNP on the Sandia parallel machines.

Vehar, David W.↗

INVESTIGATION OF TITANIUM BONDED GRAPHITE FOAM COMPOSITES FOR MICRO ELECTRONIC MECHANICAL SYSTEMS (MEMS) APPLICATIONS

PiMEMS Inc. (Santa Barbara, CA) in collaboration with ORNL investigated the use of Titanium Bonded Graphite Foam Composites (TBGC) for thermal mitigation in Micro Electronic Mechanical Systems (MEMS) applications. Also considered were potentially new additive manufacturing routes to producing novel high surface area micro features and diverse shaped heat transfer components for numerous lightweight MEMs applications.

36 MATERIALS SCIENCE↗

Surface analysis of model systems: From a metal-graphite interface to an intermetallic catalyst

This thesis summarizes research completed on two different model systems. In the first system, we investigate the deposition of the elemental metal dysprosium on highly-oriented pyrolytic graphite (HOPG) and its resulting nucleation and growth. The goal of this research is to better understand the metal-carbon interactions that occur on HOPG and to apply those to an array of other carbon surfaces. This insight may prove beneficial to developing and using new materials for electronic applications, magnetic applications and catalysis.

36 MATERIALS SCIENCE↗

Surface analysis of model systems: From a metal-graphite interface to an intermetallic catalyst

This thesis summarizes research completed on two different model systems. In the first system, we investigate the deposition of the elemental metal dysprosium on highlyoriented pyrolytic graphite (HOPG) and its resulting nucleation and growth. The goal of this research is to better understand the metal-carbon interactions that occur on HOPG and to apply those to an array of other carbon surfaces. This insight may prove beneficial to developing and using new materials for electronic applications, magnetic applications and catalysis. In the second system, we investigate the intermetallic single crystal NaAu2. We conducted a characterization of the clean (111) surface along with a determination of the effects of gas exposures on the surface. No surfaces of bulk NaAu2 have been previously characterized, although the closely related system of Na films on Au(111) has been investigated. NaAu2 is an active catalyst for CO oxidation. To better understand the catalytic reaction occurring, we studied the NaAu2 surface after exposure to O 2 ,g, CO g , CO 2,g ,and H 2 O g . The goal of this research is to find a possible alternative for supported gold catalysts by utilizing an Au-rich intermetallic compound and to determine how its catalytic reaction proceeds. This insight may be valuable in determining other catalytic alternatives as well as helping understand catalytic reactions that occur with other intermetallic compounds. In order to characterize and examine these systems, we utilized several ultrahigh vacuum (UHV) techniques, including scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low-energy electron diffraction (LEED).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Review of Thermal Contact Resistance of Flexible Graphite Materials for Thermal Interfaces in High Heat Flux Applications

In this report the data is reviewed on thermal contact conductance (TCC) and/or thermal contact resistance (TCR) at material interfaces which employs flexible graphite (FG) materials as thermal interface materials (TIM). FG materials are often used as TIM due to their conforming nature. While the overall TCR can be estimated straightforward from measured data, the interface TCR is much more difficult to obtain. The report also discusses the interfacial thermal contact conductance between FG-tungsten and FG-Glidcop-Al15, which are envisioned for high-heat flux applications.

36 MATERIALS SCIENCE↗

Neural Thermal Scattering (NeTS) Modules for Graphite & Beryllium [Slides]

This presentation discusses the motivations behind the project, which include facilitating compact formulation for TSL data, extending AI knowledge, and providing advanced reactor simulation framework. It also discusses how the project accounts for beryllium and graphite complexity, including atomistic, dynamical, and neural. Additionally, new material-informed neural thermal scattering (NeTS) Modules are examined. The implications, conclusions, and plan future work for the project are also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Secondary Pion Production using the LINAC Beam on Graphite and Tungsten Targets

The Fermilab 400-MeV Linac primary proton beam can produce precision, single-species secondary beams using a production target in the MeV Test Area experimental hall; specifically, pions from 4 up to 120 MeV kinetic energy. (These low energy pions rapidly decay into a muon beam in a secondary collection and transport beamline.) Although graphite is a standard production target material given its ultra-high temperature tolerance and low impact on the post-target primary beam, secondary pion/muon total production cross sections increase approximately as Z1/3 for positive muons and N2/3 for negative muons. Higher mass targets such as tungsten can potentially increase low-energy m+ and m- rates by factors of 3 and 8, respectively. Initial production studies have confirmed higher muon yield from heavy targets (tungsten vs carbon), but also, surprisingly, show significant differences in pion production between modern hadronic models (GENIEhad) and between GEANT and MCNP, state of the art production modeling codes. This project will further investigate the production discrepancies between these two target materials and between different physics models with high-statistics runs using the GEANT-based code, G4Beamline to better quantify the results and compare with production data which will be obtained using the MTA secondary beamline.

Ahmed, Shiza↗

The Analysis of Results from 3-Point Flexure Testing of Irradiated AGC-1 Graphite Creep Specimens

Here we report the analysis of test data from AGC-1 specimen 3-pt flexure testing. At this time all mechanical (flexural) testing of AGC-1 specimens has been completed. Individual force-extension curves are available as .txt files recorded electronically from the author (burchelltd@ornl.gov). This Technical Memorandum meets Idaho National Laboratories statement of Work No. 10752 Rev. 3 deliverable 4.4C “Issue a draft ORNL TM report summarizing the results and data analysis of all mechanical testing to INL no later than May 15, 2015.” The data and analysis was provided in a timely fashion as an excel s/s with data analysis plots. This TM follows on and formalizes transmission of the data. The major conclusion from this analysis is that there is no additional effect of creep strain on the flexure strength of graphite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental Plan for NBG-18 Graphite Bi-axial Strength Testing in the Second and Third Stress Quadrants

The plan for test system's shake down and eventual (funding permitting) bi-axial testing of grade NBG-18 graphite in the second and third stress quadrant are reported. Testing in the first and fourth stress quadrants was previously reported. Details of the specimen and test system design are given along with the anticipated stress ratios to be tested, including specimen numbers are reported. The estimated test pressures needed to attain the planned stress ratios are reported.

36 MATERIALS SCIENCE↗

Robust Statistical Approach for Determination of Graphite Nitridation Using Bayesian Model Comparison

A better estimation of surface reaction efficiency of semiconductor-grade graphite with atomic nitrogen, as well as the calibration error are calculated using Bayesian updating based on experimental data. Compared with a conventional deterministic model, the stochastic model approach is a powerful tool in the sense that the model is capable of taking into account underlying error correlations among the data quantities. In this paper, we investigate four different stochastic models (called “stochastic system model classes” herein) corresponding to different descriptions of modeling and measurement error structures, given one deterministic physical model. These stochastic system model classes differ in the covariance matrix structure that is used in the uncertainty model to represent uncertainties associated with the physical model and experimental measurements. For each model class, Bayesian inference is used to estimate the posterior probabilities of the physical model parameters as well as of the stochastic model parameters. Model comparison and selection are then applied based on two measures including Bayesian evidence and Bayesian information criterion, as well as the deviance information criterion. Both measures suggest the stochastic model class, which considers that a correlation between errors in two data quantities among different data points is the most plausible. With the stochastic model class, the range of uncertainty in surface reaction efficiency is estimated to be about two orders of magnitude at [Formula: see text].

Engineering↗

Recapturing Graphite-Based Fuel Element Technology for Nuclear Thermal Propulsion

ORNL is currently recapturing graphite based fuel forms for Nuclear Thermal Propulsion (NTP). This effort involves research and development on materials selection, extrusion, and coating processes to produce fuel elements representative of historical ROVER and NERVA fuel. Initially, lab scale specimens were fabricated using surrogate oxides to develop processing parameters that could be applied to full length NTP fuel elements. Progress toward understanding the effect of these processing parameters on surrogate fuel microstructure is presented.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Improving Heat Conduction of Insulated Metal Substrate with Thermal Pyrolytic Graphite Core for SiC Power Module Packaging

TPG-core IMS concept was jointly explored in this study. Integrating high thermally conductive TPG graphite core into IMS is expected to simultaneously achieve high thermal conductivity from TPG and electrical functionalities from IMS. Nearly 2x thermal conductivity and 30% weight saving was demonstrated on TPG-core IMS compared to conventional Cu-core IMS. Significant junction temperature reduction (11°C) in steady state and power cycling was revealed by the thermal analysis as the result of improved thermal spreading in plane and through the thickness. The study also proved the manufacturability and compatibility of this TPG-core IMS structure to the existing IMS production and power module assembling. Finally, the integration of TPG and IMS paves a new packaging route to increase heat load, improve reliability, simplify module design and reduce assembling cost and number of steps.

36 MATERIALS SCIENCE↗

Effect of boronization on plasma-facing graphite surfaces and its correlation with the plasma behavior in NSTX-U

Boronization is a Plasma Facing Component (PFC) conditioning technique widely used in tokamak machines. The National Spherical Torus Experiment-Upgrade (NSTX-U) applied this conditioning, using a plasma glow with a deuterated Trimethyl-boron (d-TMB) and He mixture. The use of boronization during the campaign improved the plasma performance, allowing longer plasma discharges and H-mode access. The chemical state of an ATJ graphite sample, used as a proxy for the NSTX-U PFCs, was monitored in-situ using the Materials Analysis Particle Probe (MAPP) diagnostic and X-ray Photoelectron Spectroscopy (XPS). The XPS data showed a progressive rise (from + fluence increased. Filterscopes were used to measure the light emitted by oxygen impurities in the plasma near the surface of the PFC. An increase in the registered magnitude of the OII line, normalized to the Dγ intensity, was observed as the concentration of O on the ATJ surface increased. The plasma performance was found to be strongly correlated to oxygen impurity concentrations at the plasma edge and on the PFC surface, as measured by the discharge length and access to the H-mode regime. In this work, we present a quantitative analysis of the evolution of the chemistry of the ATJ surface, and the oxygen presence in the plasma-material interface, and report relevant plasma parameters observed during the same period of time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Highly Stable and Active Pt-Cu Oxygen Reduction Electrocatalysts Based on Mesoporous Graphitic Carbon Supports

The activity of oxygen reduction catalysts for fuel cells often decreases markedly (30-70%) during potential cycling tests designed to accelerate catalyst degradation. Herein we achieved essentially no loss in electrochemical surface area and catalyst activity during potential cycling from 0.5 to 1.2 V for presynthesized Pt-Cu nanoparticles of controlled composition that were infused into highly graphitic disordered mesoporous carbons (DMC). The high stability is favored by the strong metal-support interactions and low tendency for carbon oxidation, which mitigates the mechanisms of degradation. Electrochemical dealloying transforms the composition from Pt{sub 20}Cu{sub 80} to Pt{sub 85}Cu{sub 15} with a strained Pt-rich shell, which exhibits an enhanced ORR activity of 0.46 A/mg{sub Pt}, >4 fold that of pure Pt catalysts. The high uniformity in particle size and composition both before and after dealloying, as a consequence of the presynthesis/infusion technique, is beneficial for elucidating the mechanism of catalyst activity and, ultimately, for designing more active catalysts.

30 DIRECT ENERGY CONVERSION↗