Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

On the structural origins of ferroelectricity in HfO{sub 2} thin films

Here, we present a structural study on the origin of ferroelectricity in Gd doped HfO{sub 2} thin films. We apply aberration corrected high-angle annular dark-field scanning transmission electron microscopy to directly determine the underlying lattice type using projected atom positions and measured lattice parameters. Furthermore, we apply nanoscale electron diffraction methods to visualize the crystal symmetry elements. Combined, the experimental results provide unambiguous evidence for the existence of a non-centrosymmetric orthorhombic phase that can support spontaneous polarization, resolving the origin of ferroelectricity in HfO{sub 2} thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of homoepitaxial SrTiO{sub 3} thin films by molecular-beam epitaxy

We report the structural properties of homoepitaxial (100) SrTiO{sub 3} films grown by reactive molecular-beam epitaxy (MBE). The lattice spacing and x-ray diffraction (XRD) rocking curves of stoichiometric MBE-grown SrTiO{sub 3} films are indistinguishable from the underlying SrTiO{sub 3} substrates. Off-stoichiometry for both strontium-rich and strontium-poor compositions (i.e., Sr{sub 1+x}TiO{sub 3+{delta}} films with -0.2<x<0.2) results in lattice expansion with significant changes to the shuttered reflection high-energy electron diffraction oscillations, XRD, and film microstructure. The dependence of lattice spacing on nonstoichiometry is smaller for MBE-grown films than for homoepitaxial (100) Sr{sub 1+x}TiO{sub 3+{delta}} films prepared by pulsed-laser deposition or sputtering.

36 MATERIALS SCIENCE↗

Spherical constituent particles formed by a multistage solution treatment in Al–Zn–Mg–Cu alloys

The corrosion resistance and fracture toughness of Al–Zn–Mg–Cu alloys are greatly affected by the remaining large constituent particles with sharp corners and sharp edges. Here, we show that with a careful high-temperature solution treatment, these constituent particles can be formed into spherical rather than irregular shapes. This results in better corrosion resistance and mechanical properties for the alloys than the conventional solution treatment. The complex microstructures of the formed spherical constituent particles and their formation mechanism were studied using focused ion beam (FIB), scanning transmission electron microscopy (STEM) and selected area electron diffraction (SAED). It was revealed that there are five types of spherical constituent particles formed after the special solution treatment, and each type has its own characteristic microstructural features. - Highlights: • Improved combined mechanical properties obtained by spheroidizing treatment. • Five spherical particles have been found in alloy treated by spheroidizing. • These particles have interesting structures, including quasicrystal, and so on. • It is the first time to observe petal-like η phase formed by solution treatment. • We reported a critical state to decompose the most constituents by spheroidizing.

36 MATERIALS SCIENCE↗

Correlation of magnetoelectric coupling in multiferroic BaTiO{sub 3}-BiFeO{sub 3} superlattices with oxygen vacancies and antiphase octahedral rotations

Multiferroic (BaTiO{sub 3}-BiFeO{sub 3}) × 15 multilayer heterostructures show high magnetoelectric (ME) coefficients α{sub ME} up to 24 V/cm·Oe at 300 K. This value is much higher than that of a single-phase BiFeO{sub 3} reference film (α{sub ME} = 4.2 V/cm·Oe). We found clear correlation of ME coefficients with increasing oxygen partial pressure during growth. ME coupling is highest for lower density of oxygen vacancy-related defects. Detailed scanning transmission electron microscopy and selected area electron diffraction microstructural investigations at 300 K revealed antiphase rotations of the oxygen octahedra in the BaTiO{sub 3} single layers, which are an additional correlated defect structure of the multilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large piezoelectricity in Pb-free 0.96(K{sub 0.5}Na{sub 0.5}){sub 0.95}Li{sub 0.05}Nb{sub 0.93}Sb{sub 0.07}O{sub 3}−0.04BaZrO{sub 3} ceramic: A perspective from microstructure

We employ transmission electron microscopy to explore the reason for large piezoelectricity (d{sub 33}≈400pC/N) in a Pb-free 0.96(K{sub 0.5}Na{sub 0.5}){sub 0.95}Li{sub 0.05}Nb{sub 0.93}Sb{sub 0.07}O{sub 3} −0.04BaZrO{sub 3} ceramic from microstructure. The result shows that the high piezoelectricity corresponds to a miniaturized nanodomain configuration in a domain hierarchy. The nanodomains disappear on heating accompanied by a reduction in d{sub 33} value. Further convergent beam electron diffraction study reveals a coexistence of tetragonal and orthorhombic phase, which indicates that large piezoelectricity of KNLNS{sub 0.07}-BZ may stem from easy polarization rotation due to low polarization anisotropy on the tetragonal-orthorhombic phase boundary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-quality InN films on MgO (100) substrates: The key role of 30° in-plane rotation

High crystalline layers of InN were grown on MgO(100) substrates by gas source molecular beam epitaxy. Good quality films were obtained by means of an in-plane rotation process induced by the annealing of an InN buffer layer to minimize the misfit between InN and MgO. In situ reflection high-energy electron diffraction showed linear streaky patterns along the [011{sup ¯}0] azimuth and a superimposed diffraction along the [112{sup ¯}0] azimuth, which correspond to a 30° α-InN film rotation. This rotation reduces the mismatch at the MgO/InN interface from 19.5% to less than 3.5%, increasing the structural quality, which was analyzed by high-resolution X-ray diffraction and Raman spectroscopy. Only the (0002) c plane diffraction of α-InN was observed and was centered at 2θ = 31.4°. Raman spectroscopy showed two modes corresponding to the hexagonal phase: E1(LO) at 591 cm{sup −1} and E2(high) at 488 cm{sup −1}. Hall effect measurements showed a carrier density of 9 × 10{sup 18} cm{sup −3} and an electron Hall mobility of 340 cm{sup 2}/(V s) for a film thickness of 140 nm.

36 MATERIALS SCIENCE↗

A study on spherical particles in Al65Cu20Fe15 alloy prepared by arc melting

Highlights: • Spherical particles and facets were found. • Spherical particles consist of quasicrystalline grains embedded in single crystal matrix. • Facets were found on the surface of spherical particles, which can be classified to three types. • A model for the formation of spherical particles is suggested. • Reasons for the formation of facets are discussed. - Abstract: Al-Cu-Fe alloys are important due to reports that stable icosahedral quasicrystalline phase with composition in the vicinity of Al{sub 65}Cu{sub 20}Fe{sub 15} can be prepared. However, it has been widely reported that the as-prepared alloy, very often by arc-melting, is porous, consisting of particles with different morphologies. Among these, one type of particles of a spherical shape is considered as pure cubic β phase in previous reports. In this research, this spherical particle was studied using a Scanning Electron Microscope, Energy Dispersive X-ray Spectroscopy, Transmission Electron Microscope, and Electron Diffraction. It was found that the particles are not single phase, consisting of icosahedral quasicrystalline grains embedded inside single crystal matrix of τ phase. Additionally, there are places where the τ phase appears to have out-most layer enriched in Cu. The surface of the particles is faceted and the facets can be classified to three types according to their detailed structures. A close examination and analysis led to the conclusion that these three types are parallel to the atomic planes of {1 1 0}, {1 1 1}, and {1 0 0}, respectively. A model for the spherical particle formation is suggested and the reasons for the formation of facets are discussed. This report is valuable in clarifying some discrepancies in previous reports, and in understanding the phase development in an Al-Cu-Fe alloy system.

36 MATERIALS SCIENCE↗

Compositional and Structural Characterization by TEM of Lattice-Mismatched III-V Epilayers

We discuss compositional and structural transmission electron microscopy (TEM) characterization of lattice-mismatched (LMM) III-V epilayers grown on GaAs by metalorganic chemical vapor deposition (MOCVD), with possible applications in high-efficiency multijunction solar cells. In addition to the use of TEM imaging to survey layer thicknesses and defect morphology, our analysis emphasizes the particular methods of energy-dispersive X-ray spectrometry (EDX) and convergent-beam electron diffraction (CBED). Outlined here is a standards-based method for extracting compositions by EDX, which uses principal-component analysis (PCA) [1], combined with the zeta-factor approach of Watanabe and Williams [2]. A procedure is described that uses the coordinates of high-order Laue zone (HOLZ) lines, which are found in the bright-field disks of CBED patterns, to extract composition and strain parameters from embedded epilayers. The majority of the crystal growth for this work was performed at NREL, which has accommodated the development at SDSM&T of the characterization techniques described. However, epilayer deposition capability at SDSM&T has recently been achieved, using a home-built system, which is presently being used to examine new lattice-mismatched structures relevant to photovoltaic technology.

14 SOLAR ENERGY↗

Non-vacuum growth of graphene films using solid carbon source

This study demonstrates that air annealing can grow high-quality graphene films on the surface of polycrystalline nickel film with the help of an effective SiO{sub 2} capping layer. The number of graphene layers can be modulated by the amount of carbon embedded in the Ni film before annealing. Raman analysis results, transmission electron microscopy images, and electron diffraction patterns of the samples confirm that graphene films can be grown in air with an oxygen blocking layer and a 10 °C/s cooling rate in an open-vented rapid thermal annealing chamber or an open tube furnace. The high-quality low-defect air-annealing grown graphene is comparable to commercially available graphene grown via chemical vapor deposition. The proposed graphene growth using air annealing technique is simple and low-cost, making it highly attractive for mass production. It is transfer-free to a silicon substrate and can speed up graphene development, opening up new applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ordered Mesoporous CMK-5 Carbon with Ultra-Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Ordered mesoporous CMK-5 carbons with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2, 3-di-hydroxynaphtalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)2.6H2O] solution in isopropanol added to the carbon-silica nanocomposites prior to thermal treatments. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM) and in situ electron diffraction X-ray spectroscopy (EDX). While TG revealed carbon contents lower than 30 wt%, nitrogen adsorption provided information about homogeneity of carbon thin film deposited onto mesopore walls of ordered silica templates, SBA-15. The templates, carbon-silica nanocomposites and carbon inverse replicas with nickel nanoparticles exhibited uniform pores, high surface areas and large pore volumes. Graphitic carbon was identified by the presence of a characteristic G band on Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD.The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles were uniform in size, ~3nm, and were homogeneously dispersed within ordered tubular carbon walls. A few larger clusters of nickel, ~60nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles were largely composed of Ni with traces of NiO. Similar nanoparticles dispersions have been reported only for Ni-containing multi-walled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbons possessed larger Ni/NiO nanoparticles within CMK-3 nanostructure.

36 MATERIALS SCIENCE↗

Anisotropic growth of Ni 2 (Cr,Mo) ordered phase in proton irradiated Ni-Cr-Mo alloys

Ni-Cr-Mo alloys are widely used in the nuclear industry as structural materials due to their high temperature strength and corrosion resistance. Ni-based alloys containing around 33 at.% (Cr+Mo) developed a long-range ordered Ni 2 (Cr,Mo) phase after thermal aging and/or irradiation. The ordering mechanism for thermally-aged Ni 2 (Cr,Mo) phase is well-understood, characterized to be sluggish, homogeneous, and isotropic. The ordering mechanism for irradiation-induced Ni 2 (Cr,Mo) phase is not fully understood, characterized as having rapid formation and demonstrating anisotropic precipitation. Here, this work elucidates the anisotropic precipitation and anisotropic precipitation mechanism of Ni 2 (Cr,Mo) after proton irradiation in Ni-Cr-Mo alloys. Selected area electron diffraction and bright-field scanning transmission electron microscopy imaging are used to image superlattice reflections from the ordered phase and irradiation-induced defects, respectively. A higher degree of anisotropic precipitation is observed with increasing dislocation loop and void size; a phenomenon not observed in thermally aged samples.

36 - MATERIALS SCIENCE↗

Measurement of femtosecond dynamics of ultrafast electron beams through terahertz compression and time-stamping

Visualizing ultrafast dynamics at the atomic scale requires time-resolved characterization with femtosecond temporal resolution. For fully relativistic electron bunch probes, existing techniques for single-shot ultrafast electron diffraction (UED) are limited by the achievable electron probe bunch length, charge, and timing jitter. We present the first experimental demonstration of dual-fed THz-driven compression and time-stamping that enables electron probes with improved temporal resolution. This technique utilizes two counter-propagating quasi-single-cycle THz pulses generated from two OH-1 organic crystals coupled into an optimized THz compressor structure. We demonstrate electron bunch compression and time-of-arrival jitter suppression by a factor of 3 paving the way toward unique opportunities for UED time-resolved measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Importance of bulk excitations and coherent electron-photon-phonon scattering in photoemission from PbTe(111): Ab initio theory with experimental comparisons

This paper presents a fully ab initio many-body photoemission framework that includes coherent three-body electron-photon-phonon scattering to predict the transverse momentum distributions and the mean transverse energies (MTEs) of bulk photoelectrons from single-crystal photocathodes. The need to develop such a theory stems from the lack of studies that provide complete understanding of the underlying fundamental processes governing the transverse momentum distribution of photoelectrons emitted from single crystals. For example, initial predictions based on density-functional theory calculations of effective electron masses suggested that the (111) surface of PbTe would produce very small MTEs (≤ 15 meV), whereas our experiments yielded MTEs ten to twenty times larger than these predictions and also exhibited a lower photoemission threshold than predicted. The ab initio framework presented in this paper correctly reproduces both the magnitude of the MTEs from our measurements in PbTe(111) and the observed photoemission below the predicted threshold. Our results show that both photoexcitations into states that propagate in the bulk of the material and coherent many-body electron-photon-phonon scattering processes, which initial predictions ignored, play surprisingly important roles in photoemission from PbTe(111). Lastly, from the lessons learned, we recommend a procedure for rapid computational screening of potential single-crystal photocathodes for applications in next-generation ultrafast electron diffraction and X-ray free-electron lasers, which will enable significant advances in condensed matter research.

36 MATERIALS SCIENCE↗

Atomic scale analysis of Nb3Sn on Nb prepared by a vapor-diffusion process for superconducting radiofrequency cavity applications

We report an atomic-scale analysis of the microstructure of Nb3Sn coating on Nb prepared by vapor diffusion process for superconducting radiofrequency (SRF) cavity application using transmission electron microscopy (TEM). Epitaxial growth of Nb3Sn on the Nb substrate is found and four types of orientation relationships at the Nb3Sn/Nb interface are identified by electron diffraction or high-resolution scanning transmission electron microscopy (STEM) analysis. Thin Nb3Sn grains are observed in regions with low Sn flux and they have the specific orientation relationship, Nb3Sn (1-20)//Nb (-111) and Nb3Sn (002)//Nb (0-11). The Nb3Sn/Nb interface of thin grains had a large lattice mismatch, 12.3 at.%, and a high density of misfit dislocations was observed by HR-STEM. Based on our microstructural analysis of the thin grains, we conclude that the thin regions are probably a result of a slow interfacial reaction with this particular orientation relationship at the interface. The Sn-deficient regions are seen to form initially at the Nb3Sn/Nb interface and remain in the grains due to the slow diffusion of Sn in bulk Nb3Sn. The formation of Sn-deficient regions and the effects of strain and interfacial energies on the formation of Sn-deficient regions at various interfaces were also estimated by first-principle calculation. The finding of orientation relationships at the Nb3Sn/Nb interface provides important information about the formation of defects in Nb3Sn coatings such as large thin regions, Sn-deficient regions, which are critical to the performance of Nb3Sn superconducting radiofrequency cavities for accelerators.

43 PARTICLE ACCELERATORS↗

Mitigation of tin whisker growth by inserting Ni nanocones

Highlights: • Tin whisker growth is mitigated effectively by inserting Ni nanocones. • Ni nanocones impede Sn dynamic recrystallization by blocking dislocation motions. • The inhibition method and mechanism are important to the study of tin whisker. - Abstract: An innovative controllable way has been proposed to mitigate tin whisker growth by inserting Ni nanocones prepared by electrodeposition. The results reveal that, after inserting Ni nanocones, tin whisker formation is mitigated effectively for 1.6 μm Sn coating but there is no inhibition effect for 4.5 μm Sn coating. The coatings are characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectrometer and electron backscatter diffraction (EBSD). The EBSD results show that Sn grain size without Ni nanocones increases significantly after indentation test compared with Sn grains with Ni nanocones. The inhibition effect of Ni nanocones on whisker growth can be ascribed to its specific structure which prevents dynamic recrystallization and produces horizontal grain boundaries of Sn grains. The structural inhibition method and mechanism proposed are of great importance to the research of tin whisker.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Interface and nanostructure evolution of cobalt germanides on Ge(001)

Cobalt germanide (Co{sub x}Ge{sub y}) is a candidate system for low resistance contact modules in future Ge devices in Si-based micro and nanoelectronics. In this paper, we present a detailed structural, morphological, and compositional study on Co{sub x}Ge{sub y} formation on Ge(001) at room temperature metal deposition and subsequent annealing. Scanning tunneling microscopy and low energy electron diffraction clearly demonstrate that room temperature deposition of approximately four monolayers of Co on Ge(001) results in the Volmer Weber growth mode, while subsequent thermal annealing leads to the formation of a Co-germanide continuous wetting layer which evolves gradually towards the growth of elongated Co{sub x}Ge{sub y} nanostructures. Two types of Co{sub x}Ge{sub y} nanostructures, namely, flattop- and ridge-type, were observed and a systematic study on their evolution as a function of temperature is presented. Additional transmission electron microscopy and x-ray photoemission spectroscopy measurements allowed us to monitor the reaction between Co and Ge in the formation process of the Co{sub x}Ge{sub y} continuous wetting layer as well as the Co{sub x}Ge{sub y} nanostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructures of ZnO films deposited on (0001) and r-cut α-Al2O3 using metal organic chemical vapor deposition

Zinc oxide films were deposited on (0001) and r-cut α-Al2O3 under identical conditions using metal organic chemical vapor deposition. Microstructures of the ZnO films were studied in detail using conventional and high-resolution transmission electron microscopy (HRTEM), electron diffraction, and HRTEM image simulations. The films deposited on these two substrates show distinctive structural differences. The film grown on r-cut α-Al2O3 shows a high quality single crystal with an orientation relationship of α-Al2O3[-101-1]//ZnO[0001] and α-Al2O3(10-1-2)//ZnO(2-1-10). The interface between the film and the substrate was abrupt and decorated with high density of misfit dislocations. Film grown on α-Al2O3 (0001) shows several orientation domains. Typically, one domain correspond to the classic growth model such that α-Al2O3 (0001)//ZnO(0001) and α-Al2O3 [11-20]//ZnO[10-10]. Another domain corresponds to the growth mode such that α-Al2O3 [11-20]//ZnO[10-10] but the (0001) plane of ZnO is tilted relative to the (0001) plane of α-Al2O3 such that ZnO(0001) is almost parallel to the α-Al2O3 (-1104) plane. This orientation reduces the extent of lattice mismatch as compared with the classic growth mode. The interface between ZnO and α-Al2O3 is abrupt and possesses periodic dislocations.

36 MATERIALS SCIENCE↗