The effect of nickel on the strength of iron nickel alloys: Implications for the Earth’s inner core
Abstract not provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
Previous research has provided strong evidence that CO 2 and H 2 O gasification reactions can provide non-negligible contributions to the consumption rates of pulverized coal (pc) char during combustion, particularly in oxy-fuel environments. Fully quantifying the contribution of these gasification reactions has proven to be difficult, due to the dearth of knowledge of gasification rates at the elevated particle temperatures associated with typical pc char combustion processes, as well as the complex interaction of oxidation and gasification reactions. Gasification reactions tend to become more important at higher char particle temperatures (because of their high activation energy) and they tend to reduce pc oxidation due to their endothermicity (i.e. cooling effect). The work reported here attempts to quantify the influence of the gasification reaction of CO 2 in a rigorous manner by combining experimental measurements of the particle temperatures and consumption rates of size-classified pc char particles in tailored oxy-fuel environments with simulations from a detailed reacting porous particle model. The results demonstrate that a specific gasification reaction rate relative to the oxidation rate (within an accuracy of approximately +/- 20% of the pre-exponential value), is consistent with the experimentally measured char particle temperatures and burnout rates in oxy-fuel combustion environments. Conversely, the results also show, in agreement with past calculations, that it is extremely difficult to construct a set of kinetics that does not substantially overpredict particle temperature increase in strongly oxygen-enriched N2 environments. This latter result is believed to result from deficiencies in standard oxidation mechanisms that fail to account for falloff in char oxidation rates at high temperatures.
Laser based directed energy deposition (DED) is a competitive method for repairing and remanufacturing metallic parts used in numerous industries including aerospace and biomedical. However, the numerous dynamic phenomena associated with the DED process often result in defects such as entrapped-gas pores, lack of fusion, and undesirable anisotropic properties. The entrapped-gas pore, being one of the most common issues, not only influences melt-pool dynamics but also reduces the fabrication quality and mechanical properties of parts fabricated by the DED process. To reduce and further understand this issue, the real-time observation of the pore formation process needs to be studied first. To directly observe the phenomena in the melt pool, high-speed techniques are needed because rapid solidification leads to rapid pore formation and movement. In-situ high-speed X-ray has been proven to be an effective method in investigating the melt pool dynamics and pore formation mechanisms in the laser powder bed fusion process, in which the fabrication process is quite different from that in DED. Here, the high-speed X-ray method is extended to study the formation of entrapped-gas pores. The real-time formation and quantitative analysis of pores under each set of processing parameters (particle velocity, laser power, and spot welding dwelling time of stationary laser) in the DED process are investigated. We found that the DED with a higher particle velocity (3.19 m/s) produced a smaller average pore size of 27.8 µm and a lower pore area fraction of 0.52%. The DED under lower laser power (156 W) generated a smaller average pore size of 20.3 µm and a lower pore area fraction of 1.94%. The shorter dwelling time (10 ms) benefited the decrease of both average pore size and pore area fraction.
Not Available
Microscale water distribution in the subsurface is key to many geochemical and biogeochemical reactions. This study investigated microscale water distribution and movement in unsaturated soils using micro-continuum hydrodynamic models, and examined the effect of microscale water distribution on organic carbon (C) decomposition using a micro-continuum biogeochemical reaction model. The micro-continuum hydrodynamic model that relates capillary pressure to porosity captured the measured water imbibition curve at the core scale, and exhibited reasonable water distribution and movement at the microscale. The simulations of organic C decomposition illustrate that microscale water distribution strongly affected the distribution of C decomposition rates by regulating the availability of dissolved organic C and oxygen. Particularly, changes in water distribution altered the location and intensity of reactive hotspots and thereby CO2 flux from soils. The microscale interactions between water content and organic C decomposition rate provide underlying mechanisms for explaining macroscale phenomenon observed in laboratory and fields. Overall, this study presents a useful tool for explicating hydro-biogeochemical behaviors in the subsurface by integrating micro-continuum hydrodynamic and biogeochemical reaction modeling.
To gain insight into the Cr poisoning mechanism at the cathode side of solid oxide fuel cells (SOFCs) with stainless steel interconnects, we conducted an investigation of the impact of Cr2O3 overlayers on oxygen diffusion in various SOFC electrolyte and cathode materials. High density Gd0.10Ce0.90O2 (GDC), Y0.15Zr0.85O2 (YSZ) and La0.6Sr0.4Co0.2Fe0.8O2 (LSCF) sintered pellets were covered with 3 to 30 nm Cr - overlayers that were subsequently oxidized, forming Cr2O3. Standard 18O tracer diffusion experiments at 800°C were performed and TOFSIMS profiling revealed a Cr2O3 thickness-dependent oxygen uptake process. The oxygen ion diffusion coefficients were found to be unaffected by the Cr2O3 overlayers, which is predictable since they are a bulk property. The extracted surface exchange coefficients however varied with Cr2O3 overlayer thickness. Solid state reaction measurements of Cr2O3 with the three materials of interest, and electronic structure considerations concerning the surface exchange, led to the conclusion that the observed oxygen uptake hindrance for LSCF and the slight increase of the surface exchange coefficient for YSZ can be attributed to the electronic properties of Cr2O3. The rate limitation of the oxygen incorporation into the materials is therefore strongly dependent on the surface electronic properties. A critical thickness of Cr2O3 was determined where the transition from decreased cathode-performance to a Cr2O3-property-governed regime occurs.
Rationale: The monitoring of TB treatments in clinical practice and clinical trials relies on traditional sputum-based culture status indicators at specific time points. Accurate, predictive, blood-based protein markers would provide a simpler and more informative view of patient health and response to treatment. Objective: We utilized sensitive, high throughput multiplexed ion mobility-mass spectrometry (IM-MS) to characterize the serum proteome of TB patients at the start of and at 8 weeks of rifamycin-based treatment. We sought to identify treatment specific signatures within patients as well as correlate the proteome signatures to various clinical markers of treatment efficacy. Methods: Serum samples were collected from 289 subjects enrolled in CDC TB Trials Consortium Study 29 at time of enrollment and at the end of the intensive phase (after 40 doses of TB treatment). Serum proteins were immunoafinity-depleted of high abundant components, digested to peptides and analyzed for data acquisition utilizing a unique liquid chromatography IM-MS platform (LC-IM-MS). Linear mixed models were utilized to identify serum protein changes in the host response to antibiotic treatment as well as correlations with culture status end points. Results: A total of 10,137 peptides corresponding to 872 proteins were identified, quantified, and used for statistical analysis across the longitudinal patient cohort. In response to TB treatment, 244 proteins were sig- ni?cantly altered. Pathway/network comparisons helped visualize the interconnected proteins, identifying up regulated (lipid transport, coagulation cascade, endopeptidase activity) and down regulated (acute phase) processes and pathways in addition to other cross regulated networks (inflammation, cell adhesion, extracellular matrix). Detection of possible lung injury serum proteins such as HPSE, significantly downregulated upon treatment. Analyses of microbiologic data over time identified a core set of serum proteins (TTHY, AFAM, CRP, RET4, SAA1, PGRP2) which change in response to treatment and also strongly correlate with culture status. A similar set of proteins at baseline were found to be predictive of week 6 and 8 culture status. Conclusion: A comprehensive host serum protein dataset reflective of TB treatment effect is defined. A repeating set of serum proteins (TTHY, AFAM, CRP, RET4, SAA1, PGRP2, among others) were found to change significantly in response to treatment, to strongly correlate with culture status, and at baseline to be predictive of future culture conversion. If validated in cohorts with long term follow-up to capture failure and relapse of TB, these protein markers could be developed for monitoring of treatment in clinical trials and in patient care.
Although amelogenin comprises the vast majority of the matrix that templates calcium phosphate nucleation during enamel formation, other proteins, particularly enamelin, are also known to play an important role in the formation of enamel’s intricate architecture. However, there is little understanding of the interplay between amelogenin and enamelin in controlling processes of mineral nucleation and growth. Here we used an in vitro model to investigate the impact of enamelin co-assembly with amelogenin on calcium phosphate nucleation for a range of enamelin-to-amelogenin ratios. We found that amelogenin alone is a weak promoter of nucleation, but addition of enamelin enhanced nucleation rates in a highly non-linear, non-monotonic manner reaching a sharp maximum at a ratio of 1:50. We provide a phenomenological model to explain this effect that assumes only isolated enamelin proteins can act as sites of enhanced nucleation, while enamelin oligomers cannot. Even when co-assembly is random, the model reproduces the observed behavior, suggesting a simple means to tightly control the timing and extent of nucleation and phase transformation by amelogenin and enamelin.
A pilot-scale biomass catalytic pyrolysis unit with a nominal throughput of one tonne of biomass per day (1TPD) has been in operation since 2013 to investigate the process parameters that have the largest influence on biocrude yield, oxygen content, and chemical composition. A parametric study was conducted to investigate the effect of pyrolysis temperature, ranging from 433 to 581 °C, on biocrude yield and quality. A locally sourced loblolly pine feedstock and a commercially available, spray dried, nonzeolitic γ-Al 2 O 3 catalyst were used in individual experiments conducted at each pyrolysis temperature to achieve a minimum of 4 h of steady-state continuous operation. Typically, 600–800 kg of biomass was fed over a 12-h period, with one experiment extended to almost 29 h (1144-kg biomass fed) and one experiment interrupted by a process upset after just 7 h (411-kg biomass fed). Comprehensive analysis of collected gas, liquid, and solid products were used to calculate carbon balances (77% to 107%) for each experiment. The biocrude yield ranged from 12 to 18 wt % C and, in general, decreased with increasing pyrolysis temperature. The average steady-state biocrude yield as a function of temperature translated to a biocrude production rate between 40 and 50 gallons per dry ton. The biocrude oxygen content varied between 21 and 31 wt %, on a dry basis, and as expected, decreased with increasing pyrolysis temperature. The identified components in the semivolatile biocrude products are mostly methoxyphenols and other multiphenolic compounds. The multiphenolic compounds are demethoxylated at pyrolysis temperatures above 500 °C, producing biocrudes with higher concentrations of monophenols and polycyclic aromatic hydrocarbons. The concentration of anhydrosugars, like levoglucosan in the biocrudes, decreased with increasing pyrolysis temperature from ∼15 to ∼1 vol %.
As important components with excellent oxidation and adsorption activity in soils and sediments, manganese oxides affect the transportation and fate of nutrients and pollutants in natural environments. In this work, birnessite was formed by photocatalytic oxidation of Mn 2+ aq in the presence of nitrate under solar irradiation. The effects of concentrations and species of interlayer cations (Na + , Mg 2+ , and K + ) on birnessite crystal structure and micromorphology were investigated. The roles of adsorbed Mn 2+ and pH in the transformation of the photosynthetic birnessite were further studied. The results indicated that Mn 2+ aq was oxidized to birnessite by superoxide radicals (O 2 •– ) generated from the photolysis of NO 3 – under UV irradiation. The particle size and thickness of birnessite decreased with increasing cation concentration. The birnessite showed a plate-like morphology in the presence of K + , while exhibited a rumpled sheet-like morphology when Na + or Mg 2+ was used. The different micromorphologies of birnessites could be ascribed to the position of cations in the interlayer. The adsorbed Mn 2+ and high pH facilitated the reduction of birnessite to low-valence manganese oxides including hausmannite, feitknechtite, and manganite. Finally, this study suggests that interlayer cations and Mn 2+ play essential roles in the photochemical formation and transformation of birnessite in aqueous environments.
In recent years, several methods have emerged to estimate the emissions and health, environmental, and climate change damages avoided by interventions such as energy efficiency, demand response, and the integration of renewables. However, differing assumptions employed in these analyses could yield contradicting recommendations regarding intervention implementation. We test the magnitude of the effect of using different key assumptions—average vs marginal emissions, year of calculation, temporal and regional scope, and inclusion of nonemitting generation—to estimate Mid-Atlantic region power pool (PJM) emissions and damage factors. We further highlight the importance of factor selection by evaluating three illustrative 2017 power system examples in PJM. We find that for a simple building lighting intervention, using average emissions factors incorporating nonemitting generation underestimates avoided damages by 45% compared to marginal factors. For PJM demand response, outdated marginal emissions factors from 2016 overestimate avoided damages by 25% compared to 2017 factors. Our assessment of PJM summer load further suggests that fossil-only average emissions factors overestimate damages by 63% compared to average factors incorporating nonemitting generation. Here, we recommend that energy modelers carefully select appropriate emissions metrics when performing their analyses. Furthermore, since the U.S. electric grid is rapidly changing, we urge decision-makers to frequently update (and consider forecasting) grid emissions factors.
We report magnetic polar materials feature an astonishing range of physical properties, such as magnetoelectric coupling, chiral spin textures, and related new spin topology physics. This is primarily attributable to their lack of space inversion symmetry in conjunction with unpaired electrons, potentially facilitating an asymmetric Dzyaloshinskii–Moriya (DM) exchange interaction supported by spin–orbital and electron–lattice coupling. However, engineering the appropriate ensemble of coupled degrees of freedom necessary for enhanced DM exchange has remained elusive for polar magnets. Here, we study how spin and orbital components influence the capability of promoting the magnetic interaction by studying two magnetic polar materials, α-Cu(IO 3 ) 2 ( 2 D) and Mn(IO 3 ) 2 ( 6 S), and connecting their electronic and magnetic properties with their structures. The chemically controlled low-temperature synthesis of these complexes resulted in pure polycrystalline samples, providing a viable pathway to prepare bulk forms of transition-metal iodates. Rietveld refinements of the powder synchrotron X-ray diffraction data reveal that these materials exhibit different crystal structures but crystallize in the same polar and chiral P2 1 space group, giving rise to an electric polarization along the b-axis direction. The presence and absence of an evident phase transition to a possible topologically distinct state observed in α-Cu(IO 3 ) 2 and Mn(IO 3 ) 2 , respectively, imply the important role of spin–orbit coupling. Neutron diffraction experiments reveal helpful insights into the magnetic ground state of these materials. While the long-wavelength incommensurability of α-Cu(IO 3 ) 2 is in harmony with sizable asymmetric DM interaction and low dimensionality of the electronic structure, the commensurate stripe AFM ground state of Mn(IO 3 ) 2 is attributed to negligible DM exchange and isotropic orbital overlapping. The work demonstrates connections between combined spin and orbital effects, magnetic coupling dimensionality, and DM exchange, providing a worthwhile approach for tuning asymmetric interaction, which promotes evolution of topologically distinct spin phases.
The distinctive viscoelastic behavior of polymers results from a coupled interplay of motion on multiple length and time scales. Capturing the broad time and length scales of polymer motion remains a challenge. Using polyethylene (PE) as a model macromolecule, we construct coarse-grained (CG) models of PE with three to six methyl groups per CG bead and probe two critical aspects of the technique: pressure corrections required after iterative Boltzmann inversion (IBI) to generate CG potentials that match the pressure of reference fully atomistic melt simulations and the transferability of CG potentials across temperatures. While IBI produces nonbonded pair potentials that give excellent agreement between the atomistic and CG pair correlation functions, the resulting pressure for the CG models is large compared with the pressure of the atomistic system. We find that correcting the potential to match the reference pressure leads to nonbonded interactions with much deeper minima and slightly smaller effective bead diameter. However, simulations with potentials generated by IBI and pressure-corrected IBI result in similar mean-square displacements (MSDs) and stress autocorrelation functions G( t ) for PE melts. While the time rescaling factor required to match CG and atomistic models is the same for pressure- and non-pressure-corrected CG models, it strongly depends on temperature. Furthermore, transferability was investigated by comparing the MSDs and stress autocorrelation functions for potentials developed at different temperatures.
Lignin is the essential building block of lignocellulosic biomass, an excellent renewable source of different aromatic monomers for the polymer and biofuel industry. The depolymerization of lignin into value-added chemicals and fuels through the catalytic process poses a significant challenge due to the complex structure of lignin. Understanding lignin’s conformational diversity and dynamics in the liquid phase is crucial to designing an effective depolymerization process. Here, we conducted all-atom molecular dynamics simulations to understand the conformation and dynamics of softwood lignin on the all-silica zeolite nanosheet based on the MFI topology in a binary mixture of water–methanol at three different molar compositions (0%, 50%, and 100% methanol). We observed that the methanol–surface interaction is stronger than the water–surface interaction, and methanol readily diffused into the MFI core. Lignin surface contacts decrease with increasing methanol composition due to higher solubility and dynamics. Lignin dynamics on the surface in neat water is an order of magnitude smaller than methanol. Here, we also found that lignin adopts a slightly extended conformation when it stays on the surface than in the bulk solution phase for the pure water case, whereas for pure methanol and the binary solution structures are statistically similar.
Solid-state electrolytes (SSEs) for all-solid-state lithium-ion batteries are generating intense interest because these batteries can improve the safety and performance compared with devices fabricated with conventional, flammable liquid electrolytes. In these SSEs, it has been suggested that Li + ion diffusion in the grain boundaries is hindered and is a critical determinant of the overall ionic conductivity (σ). However, Li + ion diffusivities in the grain (D G ) and the grain boundary (D GB ) are difficult to determine experimentally, with few techniques capable of distinguishing the individual contributions. Here, we distinguished the D G and D GB for the protonated lithium antiperovskites (pLiAPs) SSEs: Li 2 OHCl, Li 2 OHBr, Li 2 OHF 0.1 Cl 0.9 , Li 2 OHF 0.1 Br 0.9 , and Li 2 OHCl 0.3 7Br 0.63 . The measurements were obtained directly from 7 Li pulsed-field gradient nuclear magnetic resonance (PFG-NMR) at 353 K. The 7 Li PFG-NMR echo profiles were composed of two primary components with additional secondary oscillatory components – the so-called NMR diffraction phenomenon. The length scale separating the two main components corresponds to a diffusion length of ~1.7 µm, which is thought to be the average grain size (by diameter). The short-range (≤ 1.7 µm) diffusion component associated with D G (≈10 -11 m 2 /s) varied minimally with halide substitution, while the long-range (≥ 1.7 µm) component D GB (≈10 -12 to 10 -15 m 2 /s) was highly sensitive to the substitution of halides and closely correlated with s. In addition, from the comparison of the ratio D GB /D G to D t (the Li + ion diffusion coefficient estimated from the rotational correlation time, t c ), it was determined that the contribution of D G to σ is negligible; 0.01 ~ 0.04 in the pLiAPs studied here. Finally, these insights provide fundamental understanding of the halide substitution effects on Li + ion grain versus grain boundary diffusion, and suggest that careful engineering of the grain boundaries at the microscopic level is necessary to achieve high-performance pLiAP SSEs.