Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dry processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Development of an enzyme cocktail to bioconvert untapped starch in sweet sorghum processing by-products: Part II. Application and economic potential

Demand for bioethanol and other biochemicals produced from agricultural crops has increased. Sweet sorghum has been identified as a promising bioenergy crop as it can produce starch, sugar, and fibrous biomass. During processing, starch accumulates in the juice sediments and clarification mud. And, while currently not recovered, it can be made accessible for fermentation by enzymatic hydrolysis. The enzymatic hydrolysis of starch in sweet sorghum processing streams was investigated, followed by fermentation of the resulting glucose to ethanol. The juice sediment contained sufficient starch to increase fermentable sugars by 127%, allowing a final ethanol titer of 11.1 vol%. The economics for fermentation of only dissolved sugars (Scenario 1) versus dissolved sugars and hydrolyzed starch (Scenario 2) were compared using a technoeconomic model. Fixed capital cost was found to be similar for both scenarios. For a set harvest period, Scenario 2 could produce 20% more ethanol; however, if the distillation by-product was dried and marketed as animal feed, Scenario 1 was more cost effective. A plant producing 5.6–5.7 Mkg of fuel ethanol per year had a minimum selling price of $0.67/kg of ethanol with concurrent production of animal feed and zero cost sweet sorghum processing. Finally, even with these optimistic assumptions, the estimated production cost was higher than the current wholesale price of fuel ethanol.

09 BIOMASS FUELS↗
NASA NTRS2004

Effects of Cloud-Microphysics on Tropical Atmospheric Hydrologic Processes in the GEOS GCM

The sensitivity of tropical atmospheric hydrologic processes to cloud-microphysics is investigated using the NASA GEOS GCM. Results show that a faster autoconversion - rate produces more warm rain and less clouds at all levels. Fewer clouds enhances longwave cooling and reduces shortwave heating in the upper troposphere, while more warm rain produces increased condensation heating in the lower troposphere. This vertical heating differential destablizes the tropical atmosphere, producing a positive feedback resulting in more rain over the tropics. The feedback is maintained via a two-cell secondary circulation. The lower cell is capped by horizontal divergence and maximum cloud detrainment near the melting/freezing, with rising motion in the warm rain region connected to descending motion in the cold rain region. The upper cell is found above the freezing/melting level, with longwave-induced subsidence in the warm rain and dry regions, coupled to forced ascent in the deep convection region. The tropical large scale circulation is found to be very sensitive to the radiative-dynamic effects induced by changes in autoconversion rate. Reduced cloud-radiation processes feedback due to a faster autoconversion rate results in intermittent but more energetic eastward propagating Madden and Julian Oscillations (MJO). Conversely,-a slower autconversion rate, with increased cloud radiation produces MJO's with more realistic westward propagating transients, resembling a supercloud cluster structure. Results suggests that warm rain and associated low and mid level clouds, i.e., cumulus congestus, may play a critical role in regulating the time-intervals of deep convections and hence the fundamental time scales of the MJO.

Lau, K. M.↗
DOE OSTI2025

Extraction of Pure Plastic Resins From PCR Plastic Waste by Solvent-Targeted Recovery and Precipitation (STRAP)

For this work, we have been developing a solvent‐based plastic recycling technology called STRAP. The technology is based on dissolving a targeted plastic resin in a specific solvent that does not dissolve other resins. We have demonstrated STRAP in thousands of bench scale experiments for a large variety of wastes. Recently we have demonstrated the technology for PCR, using mixed plastic wastes (MPWs), from a wet Material Recovery Facility (MRF). The process includes (1) infrared (IR) characterization to determine the plastic composition for accurate selection of the solvent to be used for the extraction of the pure resins. (2) Shredding to the right size and aspect ratio required for flowable and fast dissolvable process. (3) Mixing the MPW in the first solvent to dissolve the first resin. (4) Filtration of the solution plastic blend, to separate the nondissolved plastic from the solution. (5) Further filtration of the solution to remove micron‐sized particle of pigments and fibers. (6) Cooling for precipitation. (7) Filtration of pure resins. (8) Drying of a pure resin. (9) Extrusion of the resin to pellets. (10) Generating films or other products from the pure resin. Steps 1–10 can be considered as one‐cycle that extracted the first resin. (11) A second resin can be extracted with a respective solvent from the plastic that did not dissolve in the first cycle and following steps 1–10 described above. The process also includes characterization of interim and final products. The effort includes building a pilot system at 25 kg/h throughput. We will present specific results for various PCR.

IR characterization↗
DOE OSTI2026

Influence of plateau, slope, and valley on soil hydrology during the dry season in a Central Amazon old‐growth forest

Soil moisture regulates plant water supply and drought sensitivity in tropical forests, yet its vertical and topographic variation remains poorly characterized. We combined high-frequency time-domain reflectometry measurements from 5 to 100 cm across plateau, slope, and valley landforms at the Zona Florestal 2 research site north of Manaus, Central Amazonia, to quantify how soil moisture memory, timing of responses to rainfall, dry-down rates (τ), and soil–water depletion vary across these contrasting landforms. Landform-specific soil moisture calibration curves ensured accurate volumetric water content estimates in these highly weathered soils. During the 2023 dry-to-wet transition (August–November), soil moisture memory showed strong topographic contrasts, with valley profiles increasing from ∼47 h at 5 cm to ∼154 h at 100 cm, while plateaus exhibited higher near-surface persistence (∼124 h at 5 cm) but weaker memory at depth. Dry-down behavior reinforced these differences as valley soils exhibited τ values exceeding ∼200 h, more than double the characteristic τ of plateau soils (∼90 h). Rainfall–soil moisture correlations indicated immediate responses at shallow depths in valleys and progressively longer lags with depth on plateaus and slopes. These hydrologic patterns were mirrored in depletion profiles, which declined sharply below 30 cm on plateaus but remained high and sustained throughout the upper meter in slopes and valleys. Together, these findings provide the first depth-resolved field measurements of soil moisture memory, rainfall coupling, dry-down constants, and depletion dynamics across major upland landforms in Central Amazonia and offer clear observational benchmarks for improving land-surface and ecosystem model representations of soil–water processes.

Hillslope↗
DOE OSTI2022

Intra-annual variation in microclimatic conditions in relation to vegetation type and structure in two tropical dry forests undergoing secondary succession

Microclimate acts as a strong filter on species performance in restored and regenerating forests, particularly in seasonally dry tropical forests (SDTF). Yet few studies have measured microclimate patterns across succession in SDTF. Furthermore, although dynamic vegetation models simulate microclimate, evaluation of these simulated variables with field observations has been relatively uncommon. Here, we investigated the seasonal patterns of soil temperature and soil water in naturally regenerated and planted successional vegetation in SDTF in Costa Rica and Puerto Rico, using complementary approaches of intensive field observations and simulation modeling with the Ecosystem Demography model. We found that plots representing later successional stages were wetter on average, but only during the dry season. During the wet season, mean soil water did not differ across vegetation types, but open, early successional vegetation experienced more frequent extreme wet and dry conditions than older forest and plantations. Soil temperature tended to decline with forest structure, and later successional vegetation also experienced less extreme daily temperature fluctuations. Basal area and leaf area index were the best predictors of differences in soil water and temperature across plots. Model simulations were consistent with observations of wet season soil temperature and soil water, but the model failed to reproduce dry season soil moisture dynamics, suggesting that further work is needed to reduce model biases in microclimate variables. Collectively, our results imply that common assumptions about how microclimates influence successional processes in SDTF should be revisited.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

In situ probing of structure and deagglomeration of SnO 2 colloids via small-angle X-ray scattering

Transforming dry nanopowders into stable colloidal dispersions remains challenging due to the cohesive forces between the nanoparticles (NPs) which promote agglomeration. Effective dispersion and deagglomeration of these agglomerates is a critical process in the formulation and preparation of nanoparticle-based functional materials via the colloidal route. Understanding the deagglomeration dynamics provides information to improve microstructural quality in various applications by enabling engineering of agglomerate size, structure and morphology. However, the deagglomeration process dynamics with respect to the evolution of the fractal agglomerate structures, particularly for very small NPs, is still poorly understood and requires further investigation. This study employs in situ small-angle X-ray scattering (SAXS) to investigate the sonication-induced deagglomeration of SnO 2 NPs. Electrostatically stabilized SnO 2 colloids with varying primary particle size (6–21 nm) are investigated in a specifically designed in situ cell using synchrotron-based SAXS to study the influence of sonication time and intensity on the nanoscaled agglomerates. Complete structural analysis via SAXS reveals a direct correlation between changes in agglomerate size and structure, size-dependent deagglomeration behavior and a dependence on the overall energy introduced during sonication into the dispersion regardless of the actual power as well as ultrasonic process parameters in case of SnO 2 NPs. The results suggest that control of the dispersion process during ultrasonic deagglomeration results in tailoring agglomerates with respect to size and structure.

Deagglomeration↗
DOE OSTI2020

Aerosol Optical Tweezers Elucidate the Chemistry, Acidity, Phase Separations, and Morphology of Atmospheric Microdroplets

Aerosol particles represent unique chemical environments because of their high surface area-to-volume ratio that promotes the effects of interfacial chemistry in confined environments. Properties such as viscosity, diffusivity, water content, pH, and morphology—following liquid–liquid phase separation—can strongly alter how a particle interacts with condensable vapors and reactive trace gases, thus modifying its continual evolution and environmental effects. Our understanding of this chemical evolution of atmospheric particulate matter and its environmental impacts is largely limited by our ability to directly observe how these critical particle properties respond to the addition or reactive uptake of new chemical components. Aerosol optical tweezers (AOT) stably trap particles in focused laser beams, providing positional control and the retrieval of many of these critical properties required to understand and predict the chemistry of aerosolized microdroplets. The analytical power of the AOT stems from the retrieval of the cavity-enhanced Raman spectrum induced by the trapping laser. Analysis of the whispering gallery modes (WGMs) that resonate as a standing wave around the droplet’s interface, provide high accuracy measurements of the droplet’s size, refractive index (and thus a measurement of composition), and can distinguish between core–shell, partially engulfed, and homogeneous morphologies. In this study, we have advanced the ability to determine the properties of the core and shell phases in biphasic droplets, including obtaining high-accuracy pH measurements. These capabilities were applied to perform AOT physical chemistry experiments on authentic secondary organic aerosol (SOA) produced directly in the AOT chamber by ozonolysis of terpene vapors. The propensity of the SOA to phase separate as a shell from a wide range of nonpolar to polar core phases was observed, along with the discovery of a stable emulsified state of SOA particles in an aqueous salt droplet. Micron-thick SOA shells did not impede the gain or loss of water or squalane from the core to the surrounding air, indicating no significant diffusional limitations to condensational growth or partitioning even under dry conditions. These experiments formed the foundation of a new framework that predicts how the phase-separated morphology of complex aerosols containing organic carbon evolves during continual atmospheric oxidation processes. Increases in oxidation state will quickly drive conversion from a partially engulfed to core–shell morphology that has dramatically different chemical reactivity since the core phase is completely concealed by the shell. The recent advances in the experimental capabilities of the AOT technique such as presented here enable novel experimental methodologies that provide insights into the chemistry and multidimensional properties of aerosol microdroplets, and how these coevolve and respond to continual chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Life-Cycle Greenhouse Gas Emissions and Human Health Trade-Offs of Organic Waste Management Strategies

Waste-to-energy systems can play an important role in diverting organic waste from landfills. However, real-world waste management can differ from idealized practices, and emissions driven by microbial communities and complex chemical processes are poorly understood. This study presents a comprehensive life-cycle assessment, using reported and measured data, of competing management alternatives for organic municipal solid waste including landfilling, composting, dry anaerobic digestion (AD) for the production of renewable natural gas (RNG), and dry AD with electricity generation. Landfilling is the most greenhouse gas (GHG)-intensive option, emitting nearly 400 kg CO 2e per tonne of organic waste. Composting raw organics resulted in the lowest GHG emissions, at -41 kg CO 2e per tonne of waste, while upgrading biogas to RNG after dry AD resulted in -36 to -2 kg CO 2e per tonne. Monetizing the results based on social costs of carbon and other air pollutant emissions highlights the importance of ground-level NH3 emissions from composting nitrogen-rich organic waste or post-AD solids. However, better characterization of material-specific NH 3 emissions from landfills and land-application of digestate is essential to fully understand the trade-offs between alternatives.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Multiscale Mechanisms of Twisted Carbon Nanotube Yarns Probed In Situ by Soft X-rays during Tensile Loading

Piecing together carbon nanotubes (CNTs) into assemblies has so far failed to achieve the same elite strength performance metrics as individual CNTs, highlighting a critical deficiency in understanding the effects that the processing of individual nanostructures have on the performance of their derived macroscale assemblies, thereby hindering the development of a process-structure-performance map for these materials. Here, in this work, we propose a method to decouple the distribution orientation of nanoscale tortuosity and the microscale twist of CNT dry-spun yarns under applied loads via in situ soft X-ray probing at high energy (1200 eV) and low energy (280 eV), respectively. With this decoupling enabled by in situ soft X-ray scattering, we acquired a deeper understanding of the deformation mechanisms of these yarns. We found that for untreated yarns, the twist angle of collective CNT bundles at the macroscale is more sensitive to applied stress than the nanoscale alignment distribution. We also found that increasing nominal twist densities of yarns as well as increased strengthening via plasma treatments and polymer infiltration act to decrease the yarns’ sensitivity to realignment at the nanoscale and prevent failure by the slip mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

New Evidence for the Importance of Non-Stomatal Pathways in Ozone Deposition During Extreme Heat and Dry Anomalies

Dry deposition could partially explain the observed response in ambient ozone to extreme hot and dry episodes. We examine the response of ozone deposition to heat and dry anomalies using three long-term co-located ecosystem-scale carbon dioxide, water vapor and ozone flux measurement records. We find that, as expected, canopy stomatal conductance generally decreases during days with dry air or soil. However, during hot days, concurrent increases in non-stomatal conductance are inferred at all three sites, which may be related to several temperature-sensitive processes not represented in the current generation of big-leaf models. This may offset the reduction in stomatal conductance, leading to smaller net reduction, or even net increase, in total deposition velocity. We find the response of deposition velocity to soil dryness may be related to its impact on photosynthetic activity, though considerable variability exists. Our findings emphasize the need for better understanding and representation of non-stomatal ozone deposition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Investigating the Impact of Irrigation on Malaria Vector Larval Habitats and Transmission Using a Hydrology‐Based Model

Abstract A combination of accelerated population growth and severe droughts has created pressure on food security and driven the development of irrigation schemes across sub‐Saharan Africa. Irrigation has been associated with increased malaria risk, but risk prediction remains difficult due to the heterogeneity of irrigation and the environment. While investigating transmission dynamics is helpful, malaria models cannot be applied directly in irrigated regions as they typically rely only on rainfall as a source of water to quantify larval habitats. By coupling a hydrologic model with an agent‐based malaria model for a sugarcane plantation site in Arjo, Ethiopia, we demonstrated how incorporating hydrologic processes to estimate larval habitats can affect malaria transmission. Using the coupled model, we then examined the impact of an existing irrigation scheme on malaria transmission dynamics. The inclusion of hydrologic processes increased the variability of larval habitat area by around two‐fold and resulted in reduction in malaria transmission by 60%. In addition, irrigation increased all habitat types in the dry season by up to 7.4 times. It converted temporary and semi‐permanent habitats to permanent habitats during the rainy season, which grew by about 24%. Consequently, malaria transmission was sustained all‐year round and intensified during the main transmission season, with the peak shifted forward by around 1 month. Lastly, we evaluated the spatiotemporal distribution of adult vectors under the effect of irrigation by resolving habitat heterogeneity. These findings could help larval source management by identifying transmission hotspots and prioritizing resources for malaria elimination planning.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Chemical characterization of microplastic particles formed in airborne waste discharged from sewer pipe repairs

Microplastic particles are of increasing environmental concern due to the widespread uncontrolled degradation of various commercial products made of plastic and their associated waste disposal. Recently, common technology used to repair sewer pipes was reported as one of the emission sources of airborne microplastics in urban areas. This research presents results of the multi-modal comprehensive chemical characterization of the microplastic particles related to waste discharged in the pipe repair process and compares particle composition with the components of uncured resin and cured plastic composite used in the process. Analysis of these materials employs complementary use of surface-enhanced Raman spectroscopy, scanning transmission X-ray spectro-microscopy, single particle mass spectrometry, and direct analysis in real-time high-resolution mass spectrometry. Further, it is shown that the composition of the relatively large (100 μm) microplastic particles resembles components of plastic material used in the process. In contrast, the composition of the smaller (micrometer and sub-micrometer) particles is significantly different, suggesting their formation from unintended polymerization of water-soluble components occurring in drying droplets of the air-discharged waste. In addition, resin material type influences the composition of released microplastic particles. Results are further discussed to guide the detection and advanced characterization of airborne microplastics in future field and laboratory studies pertaining to sewer pipe repair technology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

California’s 2023 snow deluge: Contextualizing an extreme snow year against future climate change

The increasing prevalence of low snow conditions in a warming climate has attracted substantial attention in recent years, but a focus exclusively on low snow leaves high snow years relatively underexplored. However, these large snow years are hydrologically and economically important in regions where snow is critical for water resources. Here, we introduce the term “snow deluge” and use anomalously high snowpack in California’s Sierra Nevada during the 2023 water year as a case study. Snow monitoring sites across the state had a median 41 y return interval for April 1 snow water equivalent (SWE). Similarly, a process-based snow model showed a 54 y return interval for statewide April 1 SWE (90% CI: 38 to 109 y). While snow droughts can result from either warm or dry conditions, snow deluges require both cool and wet conditions. Relative to the last century, cool-season temperature and precipitation during California’s 2023 snow deluge were both moderately anomalous, while temperature was highly anomalous relative to recent climatology. Downscaled climate models in the Shared Socioeconomic Pathway-370 scenario indicate that California snow deluges—which we define as the 20 y April 1 SWE event—are projected to decline with climate change (58% decline by late century), although less so than median snow years (73% decline by late century). This pattern occurs across the western United States. Changes to snow deluge, and discrepancies between snow deluge and median snow year changes, could impact water resources and ecosystems. Understanding these changes is therefore critical to appropriate climate adaptation.

Marshall, Adrienne M.↗
NASA NTRS1984

Radar and surface data analysis of a microburst in JAWS

Two microbursts that occurred simultaneously and were produced by two neighboring storms on June 22, 1982 have been examined using Doppler radar analyses and PAM surface network wind observations. The development of the microbursts is described, and the probable importance of forcing mechanisms is considered. It is found that a sounding conductive to deep convection with a very dry, unstable boundary layer gives rise to hail storms which produce microbursts associated with high-reflectivity cores. The two microbursts were associated with intensifying shafts of very high reflectivities. Convergence into the area of downdraft within the dry layer just below the cloud base, evidence of low reflectivity notches in the neighborhood of the microburst downdrafts, and subsaturated surface conditions in the microburst outflows suggest active evaporation processes may be an important source of energy for these two microbursts.

Hjelmfelt, M. R.↗
NASA NTRS1992

Human life support during interplanetary travel and domicile. V - Mars expedition technology trade study for solid waste management

A model has been developed for NASA to quantitatively compare and select life support systems and technology options. The model consists of a modular, top-down hierarchical breakdown of the life support system into subsystems, and further breakdown of subsystems into functional elements representing individual processing technologies. This paper includes the technology trades for a Mars mission, using solid waste treatment technologies to recover water from selected liquid and solid waste streams. Technologies include freeze drying, thermal drying, wet oxidation, combustion, and supercritical-water oxidation. The use of these technologies does not have any significant advantages with respect to weight; however, significant power penalties are incurred. A benefit is the ability to convert hazardous waste into a useful resource, namely water.

Ferrall, Joe↗
NASA NTRS2012

Impact of Land Model Calibration on Coupled Land-Atmosphere Prediction

Land-atmosphere (L-A) interactions play a critical role in determining the diurnal evolution of both planetary boundary layer (PBL) and land surface heat and moisture budgets, as well as controlling feedbacks with clouds and precipitation that lead to the persistence of dry and wet regimes. Recent efforts to quantify the strength of L-A coupling in prediction models have produced diagnostics that integrate across both the land and PBL components of the system. In this study, we examine the impact of improved specification of land surface states, anomalies, and fluxes on coupled WRF forecasts during the summers of extreme dry and wet land surface conditions in the U.S. Southern Great Plains. The improved land initialization and surface flux parameterizations are obtained through calibration of the Noah land surface model using the new optimization and uncertainty estimation subsystem in NASA's Land Information System (LIS-OPT/UE). The impact of the calibration on the a) spinup of the land surface used as initial conditions, and b) the simulated heat and moisture states and fluxes of the coupled WRF simulations is then assessed. Changes in ambient weather and land-atmosphere coupling are evaluated along with measures of uncertainty propagation into the forecasts. In addition, the sensitivity of this approach to the period of calibration (dry, wet, average) is investigated. Results indicate that the offline calibration leads to systematic improvements in land-PBL fluxes and near-surface temperature and humidity, and in the process provide guidance on the questions of what, how, and when to calibrate land surface models for coupled model prediction.

Santanello, Joseph A., Jr.↗
NASA NTRS2013

Material Property Characterization of AS4/VRM-34 Textile Laminates

Several material properties (modulus, strengths, and fracture toughness) of a textile composite have been evaluated to provide input data to analytical models of Pultruded Rod Stiffened Efficient Unitized Structure (PRSEUS). The material system is based on warp-knitted preforms of AS4 carbon fibers and VRM-34 epoxy resin, which have been processed via resin infusion and oven curing. Tensile, compressive, shear, and fracture toughness properties have been measured at ambient and elevated temperatures. All specimens were tested in as-fabricated (dry) condition. Specimens were tested with and without through-thickness stitching.

Grenoble, Ray W.↗
DOE OSTI2020

Ring patterns generated by an expanding colloidal meniscus

The drop-and-dry is a common technique allowing for creation of periodic nanoparticle (NP) structures for sensing, photonics, catalysis, etc. However, the reproducibility and scalability of this approach for fabrication of NP-based structures faces serious challenges due to the complexity of the simple, at first glance, evaporation process. In this work we study the effect of the spatial confinement on the NP self-assembly under slow solvent evaporation, when the air-liquid-substrate contact line (CL) expands from the center towards the walls of a cylindrical cell, forming a toroid. Using in situ video monitoring of the stick-slip CL motion, we find regular hydrodynamic perturbations in the meniscus, and reveal fine details of the formation of quasiperiodic rings of close packed NP layers. We report that drying of the toroidal NP droplet has a number of important differences from drying of the classical hemispherical colloidal drops. In toroidal drops we observe linear-in-time average meniscus motion, in contrast to the hemispherical drops where the meniscus moves as a square root of time. While both droplet geometries produce NP ring patterns, the ring width for the toroidal drop decreases with increasing ring radius, while it decreases with decreasing the radius of the hemispherical drop. We suggest that free ligands are the main cause of the Marangoni instabilities driving the periodic vorticity in the meniscus. Finally, we show that the usually ignored contact line tension may yield a considerable contribution to the CL pinning causing the CL slip-stick motion and the ring formation.

36 MATERIALS SCIENCE↗