Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Temperature and precipitation extremes in century-long gridded observations, reanalyses, and atmospheric model simulations

Knowledge about long-term changes in climate extremes is vital to better understand multidecadal climate variability and long-term changes and to place today's extreme events in a historical context. While global changes in temperature and precipitation extremes since the midtwentieth century are well studied, knowledge about century-scale changes is limited. This paper analyses a range of largely independent observations-based data sets covering 1901–2010 for long-term changes and interannual variability in daily scale temperature and precipitation extremes. We compare across data sets for consistency to ascertain our confidence in century-scale changes in extremes. We find consistent warming trends in temperature extremes globally and in most land areas over the past century. For precipitation extremes we find global tendencies toward more intense rainfall throughout much of the twentieth century; however, local changes are spatially more variable. While global time series of the different data sets agree well after about 1950, they often show different changes during the first half of the twentieth century. In regions with good observational coverage, gridded observations and reanalyses agree well throughout the entire past century. Finally, simulations with an atmospheric model suggest that ocean temperatures and sea ice may explain up to about 50% of interannual variability in the global average of temperature extremes, and about 15% in the global average of moderate precipitation extremes, but local correlations are mostly significant only in low latitudes.

54 ENVIRONMENTAL SCIENCES↗

Multivariate physiological recordings in an experimental hemorrhage model

In this paper we describe a data set of multivariate physiological measurements recorded from conscious sheep ( N = 8; 37.4 ± 1.1 kg) during hemorrhage. Hemorrhage was experimentally induced in each animal by withdrawing blood from a femoral artery at two different rates (fast: 1.25 mL/kg/min; and slow: 0.25 mL/kg/min). Data, including physiological waveforms and continuous/intermittent measurements, were transformed to digital file formats (European Data Format [EDF] for waveforms and Comma-Separated Values [CSV] for continuous and intermittent measurements) as a comprehensive data set and stored and publicly shared here (Appendix A). The data set comprises experimental information (e.g., hemorrhage rate, animal weight, event times), physiological waveforms (arterial and central venous blood pressure, electrocardiogram), time-series records of non-invasive physiological measurements (SpO 2 , tissue oximetry), intermittent arterial and venous blood gas analyses (e.g., hemoglobin, lactate, SaO 2 , SvO 2 ) and intermittent thermodilution cardiac output measurements. A detailed explanation of the hemodynamic and pulmonary changes during hemorrhage is available in a previous publication (Scully et al., 2016)

Yaghouby, Farid↗

Tensor Minkowski Functionals: first application to the CMB

Tensor Minkowski Functionals (TMFs) are tensor generalizations of the usual Minkowski Functionals which are scalar quantities. We introduce them here for use in cosmological analysis, in particular to analyze the Cosmic Microwave Background (CMB) radiation. They encapsulate information about the shapes of structures and the orientation of distributions of structures. We focus on one of the TMFs, namely W {sub 2}{sup 1,1}, which is the (1,1) rank tensor generalization of the genus. The ratio of the eigenvalues of the average of W {sub 2}{sup 1,1} over all structures, α, encodes the net orientation of the structures; and the average of the ratios of the eigenvalues of W {sub 2}{sup 1,1} for each structure, β, encodes the net intrinsic anisotropy of the structures. We have developed a code that computes W {sub 2}{sup 1,1}, and from it α and β, for a set of structures on the 2-dimensional Euclidean plane. We use it to compute α and β as functions of chosen threshold levels for simulated Gaussian and isotropic CMB temperature and E mode fields. We obtain the value of α to be one for both temperature and E mode, which means that we recover the statistical isotropy of density fluctuations that we input in the simulations. We find that the standard ΛCDM model predicts a charateristic shape of β for temperature and E mode as a function of the threshold, and the average over thresholds is β∼ 0.62 for temperature and β∼ 0.63 for E mode. Accurate measurements of α and β can be used to test the standard model of cosmology and to search for deviations from it. For this purpose we compute α and β for temperature and E mode data of various data sets from PLANCK mission. We compare the values measured from observed data with those obtained from simulations to which instrument beam and noise characteristics of the 44GHz frequency channel have been added (which are provided as part of the PLANCK data release). We find very good agreement of β and α between all PLANCK temperature data sets with ΛCDM expectations. E mode data show good agreement for β but α for all data sets deviate from ΛCDM predictions higher than 3−σ. It is most likely that the deviations are probing the anisotropy of the noise field and beam characteristics of the detector rather than the true E mode signal since for 44GHz the signal-to-noise ratio is well below one. This will be further investigated after the full PLANCK data becomes publicly available.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SPRUCE Whole Ecosystems Warming (WEW) Environmental Data Beginning August 2015

This data set provides a record of the half-hourly averages of automated environmental data collected for 12 SPRUCE plots (4, 6, 7, 8, 10, 11, 13, 16, 17, 19, 20, and 21) beginning during deep peat heating (DPH) and continuing throughout the whole ecosystem warming (WEW) manipulations for the SPRUCE Project (Hanson et al. 2017). In August 2015, WEW was initiated at 5 warming levels (+0, +2.25 +4.5, +6.75 and +9 °C) with 2 plots per warming level. DPH measurements were underway before the initiation of WEW heating treatments and both are expected to operate through 2025. This current version includes data from 2014 through 2024. This data set includes 15 data files provided in comma separated (*.csv) format: 12 individual data files for each of the monitored SPRUCE plots, two data files corresponding to figures from Hanson et al. (2017) that support key analyses of the performance of the WEW systems, and one data file containing snow and ice depths.

54 ENVIRONMENTAL SCIENCES↗

Full-sky Gravitational Lensing Simulation for Large-area Galaxy Surveys and Cosmic Microwave Background Experiments

We present 108 full-sky gravitational lensing simulation data sets generated by performing multiple-lens plane ray-tracing through high-resolution cosmological N-body simulations. The data sets include full-sky convergence and shear maps from redshifts z = 0.05 to 5.3 at intervals of $150\,{h}^{-1}\mathrm{Mpc}$ comoving radial distance (corresponding to a redshift interval of ${\rm{\Delta }}z\simeq 0.05$ at the nearby universe), enabling the construction of a mock shear catalog for an arbitrary source distribution up to z = 5.3. The dark matter halos are identified from the same N-body simulations with enough mass resolution to resolve the host halos of the Sloan Digital Sky Survey (SDSS) CMASS and luminous red galaxies (LRGs). Angular positions and redshifts of the halos are provided by a ray-tracing calculation, enabling the creation of a mock halo catalog to be used for galaxy–galaxy and cluster–galaxy lensing. The simulation also yields maps of gravitational lensing deflections for a source redshift at the last scattering surface, and we provide 108 realizations of lensed cosmic microwave background (CMB) maps in which the post-Born corrections caused by multiple light scattering are included. We present basic statistics of the simulation data, including the angular power spectra of cosmic shear, CMB temperature and polarization anisotropies, galaxy–galaxy lensing signals for halos, and their covariances. The angular power spectra of the cosmic shear and CMB anisotropies agree with theoretical predictions within 5% up to ${\ell }=3000$ (or at an angular scale $\theta \gt 0.5$ arcmin). The simulation data sets are generated primarily for the ongoing Subaru Hyper Suprime-Cam survey, but are freely available for download at http://cosmo.phys.hirosaki-u.ac.jp/takahasi/allsky_raytracing/.

79 ASTRONOMY AND ASTROPHYSICS↗

Measures of soil, sediment, and groundwater background used by Los Alamos National Laboratory, 2012

This document summarizes approaches used by Los Alamos National Laboratory (LANL) to estimate background concentrations of constituents in soils, sediment, and groundwater. For the sake of presentation and interpretation, LANL frequently reports a “background value” that statistically represents an upper bound for a data set of background concentrations. However, actual background concentrations vary by soil and bedrock type, disturbance regimes, precipitation levels, vegetative cover, and a wide variety of other factors. The LANL reported background values are estimates for comparison, not absolute limits of possible background concentrations. In evaluating whether a sample result represents a background concentration, LANL staff evaluate the results statistically (if the sample size is large enough) or graphically against the complete distribution of the relevant background data set. For analytes with no established background data set, LANL site results are sometimes compared to upgradient or geographically distant results on a study-specific basis.

Environmental Protection↗

Variations in the Contouring of Organs at Risk: Test Case From a Patient With Oropharyngeal Cancer

Purpose: Anatomy contouring is critical in radiation therapy. Inaccuracy and variation in defining critical volumes will affect everything downstream: treatment planning, dose-volume histogram analysis, and contour-based visual guidance used in image-guided radiation therapy. This study quantified: (1) variation in the contouring of organs at risk (OAR) in a clinical test case and (2) corresponding effects on dosimetric metrics of highly conformal plans. Methods and Materials: A common CT data set with predefined targets from a patient with oropharyngeal cancer was provided to a population of clinics, which were asked to (1) contour OARs and (2) design an intensity-modulated radiation therapy plan. Thirty-two acceptable plans were submitted as DICOM RT data sets, each generated by a different clinical team. Using those data sets, we quantified: (1) the OAR contouring variation and (2) the impact this variation has on dosimetric metrics. New technologies were employed, including a software tool to quantify three-dimensional structure comparisons. Results: There was significant interclinician variation in OAR contouring. The degree of variation is organ-dependent. We found substantial dose differences resulting strictly from contouring variation (differences ranging from -289% to 56% for mean OAR dose; -22% to 35% for maximum dose). However, there appears to be a threshold in the OAR comparison metric beyond which the dose differences stabilize. Conclusions: The effects of interclinician variation in contouring organs-at-risk in the head and neck can be large and are organ-specific. Physicians need to be aware of the effect that variation in OAR contouring can play on the final treatment plan and not restrict their focus only to the target volumes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Prediction of Distributed River Sediment Respiration Rates Using Community-Generated Data and Machine Learning

River sediment microbial respiration is a key indicator of ecosystem functioning and the biogeochemical fluxes across this critical zone link surface and subsurface waters. As such, there is tremendous interest in measuring and mapping these respiration rates. Respiration observations are expensive and labor intensive; there is limited data available to the community. An open science, collaborative initiative is collecting samples for respiration rate analysis and multi-scale metadata; this evolving data set is being used for making machine learning (ML) predictions at unsampled sites to help inform continued community engagement. However, it is a challenge to find an optimum configuration for ML models to work with this feature-rich (i.e., 100+ possible input variables) data set. Here, we present results from a two-tiered approach to managing the analysis of this complex data set: (a) a stacked ensemble of models that automatically optimizes hyperparameters and manages the training of many models and (b) feature permutation importance to detect the most important features in the models. The major elements of this workflow are modular, portable, open, and cloud-based thus making this implementation a potential template for other applications. The models developed here predict that sediment organic matter chemistry is one of the most important features for predicting sediment respiration rate. Other larger-scale, important features fall into the categories of climatic, ecological, geological, and fluvial settings. Leveraging these larger-scale features to generate data-driven estimates of river sediment respiration rates reveals spatially consistent but heterogeneous patterns across the river network of the Columbia River Basin.

54 ENVIRONMENTAL SCIENCES↗

Machine-learning-informed scattering correlation analysis of sheared colloids

We have carried out theoretical analysis, Monte Carlo simulations and machine-learning analysis to quantify microscopic rearrangements of dilute dispersions of spherical colloidal particles from coherent scattering intensity. Both monodisperse and polydisperse dispersions of colloids were created and underwent a rearrangement consisting of an affine simple shear and non-affine rearrangement using the Monte Carlo method. We calculated the coherent scattering intensity of the dispersions and the correlation function of intensity before and after the rearrangement and generated a large data set of angular correlation functions for varying system parameters, including number density, polydispersity, shear strain and non-affine rearrangement. Singular value decomposition of the data set shows the feasibility of machine-learning inversion from the correlation function for the polydispersity, shear strain and non-affine rearrangement using only three parameters. A Gaussian process regressor is then trained on the data set and can retrieve the affine shear strain, non-affine rearrangement and polydispersity with relative errors of 3%, 1% and 6%, respectively. Altogether, our model provides a framework for quantitative studies of both steady and non-steady microscopic dynamics of colloidal dispersions using coherent scattering methods.

Gaussian process regression↗

A nonvoxel-based dose convolution/superposition algorithm optimized for scalable GPU architectures

Purpose: Real-time adaptive planning and treatment has been infeasible due in part to its high computational complexity. There have been many recent efforts to utilize graphics processing units (GPUs) to accelerate the computational performance and dose accuracy in radiation therapy. Data structure and memory access patterns are the key GPU factors that determine the computational performance and accuracy. In this paper, the authors present a nonvoxel-based (NVB) approach to maximize computational and memory access efficiency and throughput on the GPU. Methods: The proposed algorithm employs a ray-tracing mechanism to restructure the 3D data sets computed from the CT anatomy into a nonvoxel-based framework. In a process that takes only a few milliseconds of computing time, the algorithm restructured the data sets by ray-tracing through precalculated CT volumes to realign the coordinate system along the convolution direction, as defined by zenithal and azimuthal angles. During the ray-tracing step, the data were resampled according to radial sampling and parallel ray-spacing parameters making the algorithm independent of the original CT resolution. The nonvoxel-based algorithm presented in this paper also demonstrated a trade-off in computational performance and dose accuracy for different coordinate system configurations. In order to find the best balance between the computed speedup and the accuracy, the authors employed an exhaustive parameter search on all sampling parameters that defined the coordinate system configuration: zenithal, azimuthal, and radial sampling of the convolution algorithm, as well as the parallel ray spacing during ray tracing. The angular sampling parameters were varied between 4 and 48 discrete angles, while both radial sampling and parallel ray spacing were varied from 0.5 to 10 mm. The gamma distribution analysis method (γ) was used to compare the dose distributions using 2% and 2 mm dose difference and distance-to-agreement criteria, respectively. Accuracy was investigated using three distinct phantoms with varied geometries and heterogeneities and on a series of 14 segmented lung CT data sets. Performance gains were calculated using three 256 mm cube homogenous water phantoms, with isotropic voxel dimensions of 1, 2, and 4 mm. Results: The nonvoxel-based GPU algorithm was independent of the data size and provided significant computational gains over the CPU algorithm for large CT data sizes. The parameter search analysis also showed that the ray combination of 8 zenithal and 8 azimuthal angles along with 1 mm radial sampling and 2 mm parallel ray spacing maintained dose accuracy with greater than 99% of voxels passing the γ test. Combining the acceleration obtained from GPU parallelization with the sampling optimization, the authors achieved a total performance improvement factor of >175 000 when compared to our voxel-based ground truth CPU benchmark and a factor of 20 compared with a voxel-based GPU dose convolution method. Conclusions: The nonvoxel-based convolution method yielded substantial performance improvements over a generic GPU implementation, while maintaining accuracy as compared to a CPU computed ground truth dose distribution. Such an algorithm can be a key contribution toward developing tools for adaptive radiation therapy systems.

60 APPLIED LIFE SCIENCES↗

Global Carbon Budget 2017

Here an accurate assessment of anthropogenic carbon dioxide (CO 2 ) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere – the global carbon budget – is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify the five major components of the global carbon budget and their uncertainties. CO 2 emissions from fossil fuels and industry ( E FF ) are based on energy statistics and cement production data, respectively, while emissions from land-use change ( E LUC ), mainly deforestation, are based on land-cover change data and bookkeeping models. The global atmospheric CO 2 concentration is measured directly and its rate of growth ( G ATM ) is computed from the annual changes in concentration. The ocean CO 2 sink ( S OCEAN ) and terrestrial CO 2 sink ( S LAND ) are estimated with global process models constrained by observations. The resulting carbon budget imbalance ( B IM ), the difference between the estimated total emissions and the estimated changes in the atmosphere, ocean, and terrestrial biosphere, is a measure of imperfect data and understanding of the contemporary carbon cycle. All uncertainties are reported as ±1 σ . For the last decade available (2007–2016), E FF was 9.4 ± 0.5 GtC yr –1 , E LUC 1.3 ± 0.7 GtC yr –1 , G ATM 4.7 ± 0.1 GtC yr –1 , S OCEAN 2.4 ± 0.5 GtC yr –1 , and S LAND 3.0 ± 0.8 GtC yr –1 , with a budget imbalance B IM of 0.6 GtC yr –1 indicating overestimated emissions and/or underestimated sinks. For year 2016 alone, the growth in E FF was approximately zero and emissions remained at 9.9 ±\ 0.5 GtC yr –1 . Also for 2016, E LUC was 1.3 ± .7 GtC yr –1 , G ATM was 6.1 ± 0.2 GtC yr –1 , S OCEAN was 2.6 ± 0.5 GtC yr –1 , and S LAND was 2.7 ± 1.0 GtC yr –1 , with a small B IM of –0.3 GtC. G ATM continued to be higher in 2016 compared to the past decade (2007–2016), reflecting in part the high fossil emissions and the small S LAND consistent with El Niño conditions. The global atmospheric CO 2 concentration reached 402.8 ± 0.1 ppm averaged over 2016. For 2017, preliminary data for the first 6–9 months indicate a renewed growth in E FF of +2.0 % (range of 0.8 to 3.0 %) based on national emissions projections for China, USA, and India, and projections of gross domestic product (GDP) corrected for recent changes in the carbon intensity of the economy for the rest of the world. This living data update documents changes in the methods and data sets used in this new global carbon budget compared with previous publications of this data set.

54 ENVIRONMENTAL SCIENCES↗

Prostate implant reconstruction from C-arm images with motion-compensated tomosynthesis

Purpose: Accurate localization of prostate implants from several C-arm images is necessary for ultrasound-fluoroscopy fusion and intraoperative dosimetry. The authors propose a computational motion compensation method for tomosynthesis-based reconstruction that enables 3D localization of prostate implants from C-arm images despite C-arm oscillation and sagging. Methods: Five C-arm images are captured by rotating the C-arm around its primary axis, while measuring its rotation angle using a protractor or the C-arm joint encoder. The C-arm images are processed to obtain binary seed-only images from which a volume of interest is reconstructed. The motion compensation algorithm, iteratively, compensates for 2D translational motion of the C-arm by maximizing the number of voxels that project on a seed projection in all of the images. This obviates the need for C-arm full pose tracking traditionally implemented using radio-opaque fiducials or external trackers. The proposed reconstruction method is tested in simulations, in a phantom study and on ten patient data sets. Results: In a phantom implanted with 136 dummy seeds, the seed detection rate was 100% with a localization error of 0.86 {+-} 0.44 mm (Mean {+-} STD) compared to CT. For patient data sets, a detection rate of 99.5% was achieved in approximately 1 min per patient. The reconstruction results for patient data sets were compared against an available matching-based reconstruction method and showed relative localization difference of 0.5 {+-} 0.4 mm. Conclusions: The motion compensation method can successfully compensate for large C-arm motion without using radio-opaque fiducial or external trackers. Considering the efficacy of the algorithm, its successful reconstruction rate and low computational burden, the algorithm is feasible for clinical use.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Vector Analysis of Prostate Patient Setup With Image-Guided Radiation Therapy via kV Cone Beam Computed Tomography

Purpose: To analyze the daily setup variations in a cohort of intensity-modulated radiation therapy (IMRT) prostate cancer patients who had received daily image-guided RT without the use of fiducial markers to determine if daily image guidance is necessary. Methods and Materials: 2134 Kilovoltage (kV) cone beam computed tomography (CBCT) images were analyzed, with three shifts recorded for each image. The number of times that the vector of the combined shifts would have exceeded the planning tumor volume (PTV) margin was tallied. Then, the average scalar shift of the first five images was removed from all subsequent images for a given patient, and the number of days for which the shift vector was greater than the three-dimensional clinical tumor volume-PTV (3D CTV-PTV) margin (8 mm, created with rolling ball technique) was recorded. Additionally, the scalar shifts from every other fraction were studied to determine if the individual patient's shift vector would be adequately sampled if CBCT was not performed daily, thus reducing patient imaging dose without compromising treatment quality. Results: There were 297 cases where the vector shift was initially greater than the PTV margin. By correcting each patient's data set by the average shift of their first five images the total was 248 cases. By considering only every other image of each patient data set (after correction for the first 5 days), only 137 days in which the CTV was outside the PTV would have been seen. Conclusions: Daily imaging is recommended for prostate cancer IMRT patients in order to know the 3D (vector) position of the CTV and to ensure that it is always within the PTV margin. Correcting the data set by the average shift from the first 5 days reduces the overall number of outlier days but does not eliminate them completely.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The Gulf Nuclear Energy Infrastructure Institute: A Multidisciplinary Educational Approach for Integrated Nuclear Energy Safety Security and Safeguards in the Middle East

The Gulf Nuclear Energy Infrastructure Institute (GNEII) at Khalifa University of Science and Technology was created as a regional institute offering education, research and technical services to support nuclear energy safety, security and safeguards (3S) objectives. A mixed methods approach—using the (1) Course Evaluation, (2) GNEH Alumni Survey, (3) Capstone Project and, (4) GNEII-Related Literature data sets—was used to evaluate the effect of implementing this multidisciplinary `3S' educational program and the broader impact of the associated `3S' multidisciplinary institute on nuclear energy human resource development. Data sets (1), (2) and (3) illustrate how well GNEII implemented this novel 3S curriculum and resulted in successful knowledge transfer. Data sets (2), (3) and (4) illustrate how well GNEII's impact has positively influenced professional workplace behaviors and the institute's broader reputation to support responsible nuclear energy program education. Furthermore, GNEII demonstrates one option for successfully providing a multidisciplinary, 3S curriculum to support broader nuclear infrastructure and human resource development aims.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Incorporation of probabilistic seismic phase labels into a Bayesian multiple-event seismic locator

We add probabilistic phase labels to the multiple-event joint probability function of Myers et al., 2007 that formerly included event locations, travel-time corrections, and arrival-time measurement precision. Prior information on any of the multiple-event parameters may be used. The phase-label model includes a null label that captures phases not belonging to the collection of phases under consideration. Using the Markov-Chain Monte Carlo method, samples are drawn from the multiple-event joint probability function to infer the posteriori distribution that is consistent with priors and the arrival-time data set. Using this approach phase-label error can be accessed and phase-label error is propagated to all other multiple-event parameters. We test the method using a ground-truth data set of nuclear explosions at the Nevada Test Site. We find that posteriori phase labels agree with the meticulously analyzed data set in more than 97% of instances and the results are robust even when the input phase-label information is discarded. Only when a large percentage of the arrival-time data are corrupted does prior phase label information improve resolution of multiple-event parameters. Simultaneous modeling of the entire multiple-event system results in accurate posteriori probability regions for each multiple-event parameter.

58 GEOSCIENCES↗

THE ORBIT OF THE STAR S2 AROUND SGR A* FROM VERY LARGE TELESCOPE AND KECK DATA

Two recent papers (Ghez et al. 2008; Gillessen et al. 2009) have estimated the mass of and the distance to the massive black hole (MBH) in the center of the Milky Way using stellar orbits. The two astrometric data sets are independent and yielded consistent results, even though the measured positions do not match when simply overplotting the two sets. In this Letter, we show that the two sets can be brought to excellent agreement with each other when we allow for a small offset in the definition of the reference frame of the two data sets. The required offsets in the coordinates and velocities of the origin of the reference frames are consistent with the uncertainties given in Ghez et al. The so-combined data set allows for a moderate improvement of the statistical errors of the mass of and the distance to Sgr A*, but the overall accuracies of these numbers are dominated by systematic errors and the long-term calibration of the reference frame. We obtain R{sub 0} = 8.28 +- 0.15|{sub stat} +- 0.29|{sub sys} kpc and M{sub MBH} = 4.30 +- 0.20|{sub stat} +- 0.30|{sub sys} x 10{sup 6} M{sub sun} as best estimates from a multi-star fit.

79 ASTRONOMY AND ASTROPHYSICS↗

THE SLOAN LENS ACS SURVEY. IX. COLORS, LENSING, AND STELLAR MASSES OF EARLY-TYPE GALAXIES

We present the current photometric data set for the Sloan Lens ACS (SLACS) Survey, including Hubble Space Telescope (HST) photometry from Advanced Camera for Surveys, WFPC2, and NICMOS. These data have enabled the confirmation of an additional 15 grade 'A' (certain) lens systems, bringing the number of SLACS grade 'A' lenses to 85; including 13 grade 'B' (likely) systems, SLACS has identified nearly 100 lenses and lens candidates. Approximately 80% of the grade 'A' systems have elliptical morphologies while approx10% show spiral structure; the remaining lenses have lenticular morphologies. Spectroscopic redshifts for the lens and source are available for every system, making SLACS the largest homogeneous data set of galaxy-scale lenses to date. We have created lens models using singular isothermal ellipsoid mass distributions for the 11 new systems that are dominated by a single mass component and where the multiple images are detected with sufficient signal to noise; these models give a high precision measurement of the mass within the Einstein radius of each lens. We have developed a novel Bayesian stellar population analysis code to determine robust stellar masses with accurate error estimates. We apply this code to deep, high-resolution HST imaging and determine stellar masses with typical statistical errors of 0.1 dex; we find that these stellar masses are unbiased compared to estimates obtained using SDSS photometry, provided that informative priors are used. The stellar masses range from 10{sup 10.5} to 10{sup 11.8} M{sub sun} and the typical stellar mass fraction within the Einstein radius is 0.4, assuming a Chabrier initial mass function. The ensemble properties of the SLACS lens galaxies, e.g., stellar masses and projected ellipticities, appear to be indistinguishable from other SDSS galaxies with similar stellar velocity dispersions. This further supports that SLACS lenses are representative of the overall population of massive early-type galaxies with M{sub *} approx> 10{sup 11} M{sub sun}, and are therefore an ideal data set to investigate the kpc-scale distribution of luminous and dark matter in galaxies out to z approx 0.5.

79 ASTRONOMY AND ASTROPHYSICS↗