Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DER control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Water accelerated self-healing of hydrophobic copolymers

Previous studies have shown that copolymer compositions can significantly impact self-healing properties. This was accomplished by enhancement of van der Waals (vdW) forces which facilitate self-healing in relatively narrow copolymer compositional range. In this work we report the acceleration of self-healing in alternating/random hydrophobic acrylic-based copolymers in the presence of confined water molecules. Under these conditions competing vdW interactions do not allow H 2 O-diester H-bonding, thus forcing nBA side groups to adapt L-shape conformations, generating stronger dipole-dipole interactions resulting in shorter inter-chain distances compared to ‘key-and-lock’ associations without water. The perturbation of vdW forces upon mechanical damage in the presence of controllable amount of confined water is energetically unfavorable leading the enhancement of self-healing efficiency of hydrophobic copolymers by a factor of three. The concept may be applicable to other self-healing mechanisms involving reversible covalent bonding, supramolecular chemistry, or polymers with phase-separated morphologies.

36 MATERIALS SCIENCE↗

Molecular Scaffold Growth of Two-Dimensional, Strong Interlayer-Bonding-Layered Materials

Currently, most two-dimensional (2D) materials that are of interest to emergent applications have focused on van der Waals–layered materials (VLMs) because of the ease with which the layers can be separated (e.g., graphene). Strong interlayer-bonding-layered materials (SLMs) in general have not been thoroughly explored, and one of the most critical present issues is the huge challenge of their preparation, although their physicochemical property transformation should be richer than VLMs and deserves greater attention. MAX phases are a classical kind of SLM. However, limited to the strong interlayer bonding, their corresponding 2D counterparts have never been obtained, nor has there been investigation of their fundamental properties in the 2D limitation. Here, the authors develop a controllable bottom-up synthesis strategy for obtaining 2D SLMs single crystal through the design of a molecular scaffold with Mo 2 GaC, which is a typical kind of MAX phase, as an example. The superconducting transitions of Mo 2 GaC at the 2D limit are clearly inherited from the bulk, which is consistent with Berezinskii–Kosterlitz–Thouless behavior. The authors believe that their molecular scaffold strategy will allow the fabrication of other high-quality 2D SLMs single crystals, which will further expand the family of 2D materials and promote their future application.

2D MAX phase crystals↗

Controllable strain-driven topological phase transition and dominant surface-state transport in HfTe5

Abstract The fine-tuning of topologically protected states in quantum materials holds great promise for novel electronic devices. However, there are limited methods that allow for the controlled and efficient modulation of the crystal lattice while simultaneously monitoring the changes in the electronic structure within a single sample. Here, we apply significant and controllable strain to high-quality HfTe 5 samples and perform electrical transport measurements to reveal the topological phase transition from a weak topological insulator phase to a strong topological insulator phase. After applying high strain to HfTe 5 and converting it into a strong topological insulator, we found that the resistivity of the sample increased by 190,500% and that the electronic transport was dominated by the topological surface states at cryogenic temperatures. Our results demonstrate the suitability of HfTe 5 as a material for engineering topological properties, with the potential to generalize this approach to study topological phase transitions in van der Waals materials and heterostructures.

36 MATERIALS SCIENCE↗

Helical van der Waals crystals with discretized Eshelby twist

The ability to manipulate the twisting topology of van der Waals structures offers a new degree of freedom through which to tailor their electrical and optical properties. The twist angle strongly affects the electronic states, excitons and phonons of the twisted structures through interlayer coupling, giving rise to exotic optical, electric and spintronic behaviours1,2,3,4,5. In twisted bilayer graphene, at certain twist angles, long-range periodicity associated with moiré patterns introduces flat electronic bands and highly localized electronic states, resulting in Mott insulating behaviour and superconductivity3,4. Theoretical studies suggest that these twist-induced phenomena are common to layered materials such as transition-metal dichalcogenides and black phosphorus6,7. Twisted van der Waals structures are usually created using a transfer-stacking method, but this method cannot be used for materials with relatively strong interlayer binding. Facile bottom-up growth methods could provide an alternative means to create twisted van der Waals structures. Here we demonstrate that the Eshelby twist, which is associated with a screw dislocation (a chiral topological defect), can drive the formation of such structures on scales ranging from the nanoscale to the mesoscale. In the synthesis, axial screw dislocations are first introduced into nanowires growing along the stacking direction, yielding van der Waals nanostructures with continuous twisting in which the total twist rates are defined by the radii of the nanowires. Further radial growth of those twisted nanowires that are attached to the substrate leads to an increase in elastic energy, as the total twist rate is fixed by the substrate. The stored elastic energy can be reduced by accommodating the fixed twist rate in a series of discrete jumps. This yields mesoscale twisting structures consisting of a helical assembly of nanoplates demarcated by atomically sharp interfaces with a range of twist angles. We further show that the twisting topology can be tailored by controlling the radial size of the structure.

Liu, Yin↗

A test of the hierarchical model of litter decomposition

Our basic understanding of plant litter decomposition informs the assumptions underlying widely applied soil biogeochemical models, including those embedded in Earth system models. Confidence in projected carbon cycle–climate feedbacks therefore depends on accurate knowledge about the controls regulating the rate at which plant biomass is decomposed into products such as CO 2 . Here we test underlying assumptions of the dominant conceptual model of litter decomposition. The model posits that a primary control on the rate of decomposition at regional to global scales is climate (temperature and moisture), with the con- trolling effects of decomposers negligible at such broad spatial scales. Using a regional-scale litter decomposition experiment at six sites spanning from northern Sweden to southern France—and capturing both within and among site variation in putative controls—we find that contrary to predictions from the hierarchical model, decomposer (microbial) biomass strongly regulates decomposition at regional scales. Furthermore, the size of the microbial biomass dictates the absolute change in decomposition rates with changing climate variables. Our findings suggest the need for revision of the hierarchical model, with decomposers acting as both local- and broad-scale controls on litter decomposition rates, necessitating their explicit consideration in global biogeochemical models.

59 BASIC BIOLOGICAL SCIENCES↗

Computational study of Gleevec and G6G reveals molecular determinants of kinase inhibitor selectivity

Gleevec is a potent inhibitor of Abl tyrosine kinase but not of the highly homologous c-Src kinase. Because the ligand binds to an inactive form of the protein in which an Asp-Phe-Gly structural motif along the activation loop adopts a so-called DFG-out conformation, it was suggested that binding specificity was controlled by a “conformational selection” mechanism. In this context, the binding affinity displayed by the kinase inhibitor G6G poses an intriguing challenge. Although it possesses a chemical core very similar to that of Gleevec, G6G is a potent inhibitor of both Abl and c-Src kinases. Both inhibitors bind to the DFG-out conformation of the kinases, which seems to be in contradiction with the conformational selection mechanism. To address this issue and display the hidden thermodynamic contributions affecting the binding selectivity, molecular dynamics free energy simulations with explicit solvent molecules were carried out. Relative to Gleevec, G6G forms highly favorable van der Waals dispersive interactions upon binding to the kinases via its triazine functional group, which is considerably larger than the corresponding pyridine moiety in Gleevec. Upon binding of G6G to c-Src, these interactions offset the unfavorable free energy cost of the DFG-out conformation. When binding to Abl, however, G6G experiences an unfavorable free energy penalty due to steric clashes with the phosphate-binding loop, yielding an overall binding affinity that is similar to that of Gleevec. Such steric clashes are absent when G6G binds to c-Src, due to the extended conformation of the phosphate-binding loop.

59 BASIC BIOLOGICAL SCIENCES↗

System-of-Systems Approach for Integrated Energy Systems Modeling and Simulation: Preprint

Today’s electricity grid is the most complex system ever built—and the future grid is likely to be even more complex because it will incorporate distributed energy resources (DERs) such as wind, solar, and various other sources of generation and energy storage. The complexity is further augmented by the possible evolution to new retail market structures that provide incentives to owners of DERs to support the grid. To understand and test new retail market structures and technologies such as DERs, demand-response equipment, and energy management systems while providing reliable electricity to all customers, an Integrated Energy System Model (IESM) is being developed at NREL. The IESM is composed of a power flow simulator (GridLAB-D), home energy management systems implemented using GAMS/Pyomo, a market layer, and hardware-in-the-loop simulation (testing appliances such as HVAC, dishwasher, etc.). The IESM is a system-of-systems (SoS) simulator wherein the constituent systems are brought together in a virtual testbed. We will describe an SoS approach for developing a distributed simulation environment. We will elaborate on the methodology and the control mechanisms used in the co-simulation illustrated by a case study.

97 MATHEMATICS AND COMPUTING↗

Performance Evaluation of Distributed Energy Resource Management Algorithm in Large Distribution Networks

This paper presents performance evaluation of hierarchical optimization and control for distributed energy resource management system (DERMS) in large distribution networks via an advanced hardware-in-the-loop (HIL) platform. The HIL platform provides realistic testing in a laboratory envi-ronment, including the accurate modeling of a full-scale dis-tribution system of 11,000 nodes, the DERMS software con-troller, and 90 power hardware photovoltaics (PVs) and bat-tery inverters. The applied DERMS algorithm is designed based on a real-time optimal power flow algorithm and im-plemented with acceleration design that performs fast dis-patch of simulated PVs and real physical hardware DER devices every 4 seconds.

distributed energy management system (DERMS)↗

Electrostatic Gating of Ionic Conductance through Heterogeneous van der Waals Nanopores

Nanofluidic ionic transistors typically require gate voltages above 1 V and operate only at submillimolar ionic strengths, limiting their biocompatible applications. We demonstrate ionic transistors consisting of single sub-10 nm nanopores drilled in van der Waals (vdW) heterostructures with internal gate electrodes made of few-layer graphene. These devices deliver up to 10-fold current modulation at gate voltages as low as 0.3 V in 10 mM KCl, and ∼2-fold modulation at near-physiological 100 mM KCl. Baseline conductance with no gate shows surface-charge-dominated transport below 100 mM KCl, consistent with negatively charged hBN walls and ∼5 nm opening of the pores. The surface charge and the electrochemical asymmetry introduced by the three-electrode configuration govern the device’s behavior: negative gate voltage (V G ) enriches ionic concentrations and enhances current, whereas positive V G induces a local depletion zone that suppresses transport. The current modulation by V G is dependent on the polarity of the transmembrane potential and leads to ion current rectification. Molecular dynamics simulations of a nanopore in a hBN–graphene–hBN stack reveal confinement and surface charge-dependent suppression of the relative permittivity of interfacial water. Continuum modeling with radially varying interfacial water permittivity reproduces the asymmetric I–V characteristics and explains how the embedded gate sculpts local potential and ion concentrations. By enabling sub-0.5 V control of ionic transport at up to 100 mM salt concentrations, these devices address a key need in nanofluidics to create low-power ionic circuits and biosensing.

Materials science↗

Type-I and type-II interfaces in a MoSe 2 /WS 2 van der Waals heterostructure

We report experimental evidence that MoSe 2 and WS 2 allow the formation of type-I and type-II interfaces, according to the thickness of the former. Heterostructure samples are obtained by stacking a monolayer WS 2 flake on top of a MoSe 2 flake that contains regions of thickness from one to four layers. Photoluminescence spectroscopy and transient absorption measurements reveal a type-II interface in the regions of monolayer MoSe 2 in contact with monolayer WS 2 . In other regions of the heterostructure formed by multilayer MoSe 2 and monolayer WS 2 , features of type-I interface are observed, including the absence of charge transfer and dominance of intralayer excitons in MoSe 2 . Furthermore, the coexistence of type-I and type-II interfaces in a single heterostructure offers opportunities to design sophisticated two-dimensional materials with finely controlled photocarrier behaviors.

2D materials↗

Risk-controlled Expansion Planning with Distributed Resources (REPAIR) v1.0

The Risk-controlled Expansion Planning with Distributed Resources (REPAIR) is an innovative tool to support decisions around utility grid planning to prevent and mitigate the impact of outages caused by routine equipment failures (reliability) or by extreme events (resilience), such as storms, earthquakes or wildfires that long term interruption of service. REPAIR is a risk-based optimization and decision-making model allowing informed and transparent "cost vs risk" decisions regarding infrastructural planning of electric utilities. The model considers long-term resilience and reliability planning strategies that rely on traditional infrastructure upgrade (e.g. circuit hardening, reinforcement, new substations, etc.) or new investment alternatives, such as DERs.

Heleno, Miguel [Lawrence Berkeley National Laborat↗

A simple catch: Fluctuations enable hydrodynamic trapping of microrollers by obstacles

It is known that obstacles can hydrodynamically trap bacteria and synthetic microswimmers in orbits, where the trapping time heavily depends on the swimmer flow field and noise is needed to escape the trap. Here, we use experiments and simulations to investigate the trapping of microrollers by obstacles. Microrollers are rotating particles close to a bottom surface, which have a prescribed propulsion direction imposed by an external rotating magnetic field. The flow field that drives their motion is quite different from previously studied swimmers. We found that the trapping time can be controlled by modifying the obstacle size or the colloid-obstacle repulsive potential. We detail the mechanisms of the trapping and find two remarkable features: The microroller is confined in the wake of the obstacle, and it can only enter the trap with Brownian motion. While noise is usually needed to escape traps in dynamical systems, here, we show that it is the only means to reach the hydrodynamic attractor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Remote Epitaxial Growth of Compound Semiconductors through Graphene

Epitaxial growth has been widely used for high-quality growth of crystalline materials. However, epitaxial growth techniques usually require lattice match and similar thermal expansion coefficient between growth material and substrate, which blocks this growth technique from wide applicability. Recently, van der Waals (vdW) epitaxy has been demonstrated that allows to relax the limitation of epitaxial growth. vdW epitaxy on layered or two-dimensional (2D) materials is mediated by weak vdW interactions. In addition to these interactions, a substrate below 2D materials also plays a role to intervene in the epitaxial growth process, leaving room to realize a novel epitaxial growth process: remote epitaxy. Potential fluctuation—the difference between potential energy maxima and minima along the surface of the substrate—is influenced by this remote interaction; the fluctuation is predominant over the vdW force, due to the atomic thickness of 2D materials. The remote interactions can be controlled by modulation of polarities of 2D materials and epitaxy materials. Polar-material-based heterostructure, such as GaAs, InP, GaP and GaN with their substrate sandwiching 2D materials, enables the semiconductor film to be exfoliated from the underlying substrates through the 2D materials. This process is expected to open a novel avenue for the field of non-silicon electronics and photonics, where the ability to re-use graphene-coated substrates allows savings on the high cost of non-silicon substrates.

Lee, Kyusang↗

Thickness-dependent spin bistable transitions in single-crystalline molecular 2D material

Abstract The advent of two-dimensional (2D) crystals has led to numerous scientific breakthroughs. Conventional 2D systems have in-plane covalent bonds and a weak out-of-plane van-der-Waals bond. Here we report a new type of 2D material composed of discrete magnetic molecules, where anisotropic van-der-Waals interactions bond the molecules into a 2D packing. Through mechanical exfoliation, we can obtain single-crystalline molecular monolayers, which can be readily integrated into other 2D systems. Optical spectroscopy suggests the few-layered molecules preserve the temperature-induced spin-crossover switching observed in the bulk form but show a drastic increase in thermal hysteresis unique to these thin 2D molecule assemblies. The trapping of spin bistability with decreasing layer number can arise from domain wall dynamics in reduced dimensions. Our results establish molecular solids with strong anisotropy of intermolecular interactions as precursors to a new class of 2D materials, affording possibilities to control molecular functionalities through substrate and interlayer interactions.

36 MATERIALS SCIENCE↗

Colloidal synthesis of ultrathin KFeS 2 and RbFeS 2 magnetic nanowires with non-van der Waals 1D structures

Design of one-dimensional (1D) nanomaterials based on non-van der Waals (non-vdW) 1D chain structures is emerging as a new materials frontier, owing to their strong intrinsic anisotropy and broad compositional diversity. However, achieving ultrathin 1D morphology in such systems remains a significant challenge. In this work, we report the colloidal synthesis of ultrathin KFeS 2 and RbFeS 2 nanowires—representing the first fabrication of ultrathin 1D nanomaterials driven by non-vdW 1D crystal structures. The nanowires exhibit diameters of ∼5 nm and lengths of microns, with anisotropic growth directed by covalent [FeS 2 ] − chains. Magnetic characterization reveals significantly reduced antiferromagnetic transition temperatures and suppressed interchain ferromagnetic interactions, demonstrating pronounced size and morphology effects. Control experiments on structurally related materials indicate that direct nucleation of the 1D phase is essential for achieving the nanowire morphology. These findings establish a new synthetic pathway to an understudied family of non-vdW 1D nanomaterials, enabling exploration of their emergent quantum and magnetic properties.

Sun, Zhaohong [University of Southern California, ↗

Dichotomy of flat bands in the van der Waals ferromagnet Fe 5 ⁢GeTe 2

Quantum materials with bands of narrow bandwidth near the Fermi level represent a promising platform for exploring a diverse range of fascinating physical phenomena, as the high density of states within the small energy window often enables the emergence of many-body physics. On one hand, flat bands can arise from strong Coulomb interactions that localize atomic orbitals. On the other hand, quantum destructive interference can quench the electronic kinetic energy. Although both have a narrow bandwidth, the two types of flat bands should exhibit very distinct spectral properties arising from their distinctive origins. So far, the two types of flat bands have only been realized in very different material settings and chemical environments, preventing a direct comparison. Here, in this study, we report the observation of the two types of flat bands within the same material system—an above-room-temperature van der Waals ferromagnet, Fe 5−x GeTe 2 , distinguishable by a switchable iron site order. The contrasting nature of the flat bands is also identified by the remarkably distinctive temperature evolution of the spectral features, indicating that one arises from electron correlations in the Fe(1) site-disordered phase, while the other geometrical frustration in the Fe(1) site-ordered phase. Our results therefore provide a direct juxtaposition of the distinct formation mechanism of flat bands in quantum materials and an avenue for understanding the distinctive roles flat bands play in the presence of magnetism, topology, and lattice geometrical frustration, utilizing sublattice ordering as a key control parameter.

Wu, Han [Rice Univ., Houston, TX (United States)] ↗

Field-resolved observation of exciton coherence in a van der Waals magnet

The emergence of coherence among electronic quasiparticles underlies collective quantum phenomena from superconductivity to superradiance. In semiconductors, exciton coherence is generally thought to decay rapidly due to scattering and dephasing, limiting its persistence on ultrafast timescales. Here, in this work, we demonstrate a light-field-driven mechanism that creates and stabilizes exciton coherence in the layered antiferromagnet CrSBr. We directly record the coherent optical field emitted by excitons and track in real time how a deterministic phase, imprinted by the excitation laser, drives incoherent excitons to synchronize into a collective state. This ensemble remains phase coherent for more than 2 ps, whereas its resonance energy undergoes an ultrafast modulation mediated by spin and lattice interactions. The time-resolved field evolution indicates that the multiple peaks seen in conventional spectra originate from a single excitonic resonance subject to dynamic energy modulation. Our findings establish optical phase imprinting as a mechanism to control and sustain collective order in semiconducting magnets, bridging light-driven dynamics with excitonic and magnetic correlations in layered quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Welcome to the Special Issue on Grid-Edge Computing With Behind-the-Meter Resources [Guest Editorial]

The integration of distributed energy resources (DERs), such as solar photovoltaic systems, as well as other synergistic assets, including electric vehicles, energy storage, and smart appliances, in electric power systems has been dramatically increasing in the past few years. These assets have the capability to provide much-needed flexibility to electric power systems for improved grid reliability, resilience, and economic efficiency; however, most of these resources are located behind the meter (BTM) on customer premises, and their flexibility is not fully used in current grid operations. Grid-edge computing plays an important role in unlocking the great benefits and potential that BTM resources could provide to electric power systems by enhancing visibility and controllability at the grid edge.

behind-the-meter resources↗