SEARCH · Engineering Papers

Results for “Control Samples”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

All sources NASA NTRS DOE OSTI

DOE OSTI2022

The Readout Electronics of the Mu2e Electromagnetic Calorimeter

The Mu2e electromagnetic calorimeter has been designed to measure ~100 MeV electrons with energy resolution σE/E <10%, time resolution σt < 500ps and position resolution σx < 1cm. The detector is composed of 1348 un-doped CsI crystals coupled to two large area Silicon Photomultipliers (SiPMs). Each SiPM is connected to a Front End Electronics (FEE) chip which hosts the shaping amplifier and the high voltage linear regulator. A group of 20 FEE is controlled by one Mezzanine Board (MB) which transmits the amplified signals to one Digitizer ReAdout Controller board (DiRAC). The DiRAC samples the waveforms at 200 MHz with 12-bit ADCs, packs the data according to the Mu2e custom format and transmits them to the event builder through an optical transceiver. To limit the number of pass-through connectors and the length of the cables, the readout and digitization electronics is located inside the detector cryostat and close to the interaction target. The boards will have to sustain a neutron fluence of about 5x10 10 n/cm 2 @ 1 MeVeq (Si)/y and a Total Ionizing Dose of about 12 krad, while working into a 1T magnetic field and a vacuum of 10 (-4) Torr. This harsh operational environment has made the electronics design challenging and required an extended campaign of tests to select and qualify the employed electronic components. In this paper we report on the board architecture and design, on the qualification of the prototypes, as well as on the results of the first vertical slice test of the Mu2e calorimeter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

The relationship between urinary selenium levels and risk of gestational diabetes mellitus: A nested case–control study

Background Selenium (Se) is an essential trace element for the human body. Serum Se and urinary Se are also biomarkers to assess Se exposure status. However, studies focusing on the association between urinary Se and the risk of gestational diabetes mellitus (GDM) are rare. Objective To investigate the association between urinary Se and the risk of GDM. Methods A nested case–control study based on a prospective birth cohort in Wuhan, China, which focuses on the effects of prenatal environmental factors exposure on pregnant women and children’s health was conducted. Two hundred and twenty-six cases and 452 controls were included. Maternal urine samples were collected before GDM diagnosis, and the urinary Se levels were determined. We assessed the association of urinary Se with GDM by conditional logistic regression with maternal urinary Se level as a categorical variable, and estimated the association between Se and glucose levels by multiple linear regression. The potential modifier roles of maternal age and fetal sex have also been assessed. Results Lower urinary level of Se was significantly associated with a higher risk of GDM (OR = 2.35 for the tertile 1, 95% CI:1.36-4.06; adjusted OR = 1.79 for the tertile 2, 95%CI:1.09-2.95; p for trend = 0.01). Fetal sex had an interaction with Se in the association with GDM. The association was more pronounced among pregnant women with female fetuses than with male fetuses. Discussion Our study suggested a significant negative association between urinary Se and the risk of GDM, and this association may vary depending on the fetal sex.

Liu, Yuanxia↗

DOE OSTI2021

The International Soil Moisture Network: serving Earth system science for over a decade

In 2009, the International Soil Moisture Network (ISMN) was initiated as a community effort, funded by the European Space Agency, to serve as a centralised data hosting facility for globally available in situ soil moisture measurements (Dorigo et al., 2011b, a). The ISMN brings together in situ soil moisture measurements collected and freely shared by a multitude of organisations, harmonises them in terms of units and sampling rates, applies advanced quality control, and stores them in a database. Users can freely retrieve the data from this database through an online web portal (https://ismn.earth/en/, last access: 28 October 2021). Meanwhile, the ISMN has evolved into the primary in situ soil moisture reference database worldwide, as evidenced by more than 3000 active users and over 1000 scientific publications referencing the data sets provided by the network. As of July 2021, the ISMN now contains the data of 71 networks and 2842 stations located all over the globe, with a time period spanning from 1952 to the present. The number of networks and stations covered by the ISMN is still growing, and approximately 70% of the data sets contained in the database continue to be updated on a regular or irregular basis. The main scope of this paper is to inform readers about the evolution of the ISMN over the past decade, including a description of network and data set updates and quality control procedures. A comprehensive review of the existing literature making use of ISMN data is also provided in order to identify current limitations in functionality and data usage and to shape priorities for the next decade of operations of this unique community-based data repository.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Vegetation Warming Experiment: Leaf mass area, leaf carbon and nitrogen content, Utqiagvik, Alaska, 2021-2022

Leaf mass per area (LMA), and leaf carbon and nitrogen content of an Arctic graminoid, Carex aquatilis, from within warming chambers and paired control plots. The plants were sampled in July 2021 and July 2022 as part of the Zero Power Warming (ZPW) vegetation warming experiment conducted on the Barrow Environmental Observatory (BEO), Utqiagvik (formerly Barrow), Alaska. Samples include leaves used for gas exchange measurements and bulk harvests from each warming chamber and paired ambient plot. The files included in this data package are in .csv format, and include 3 data files and 4 metadata files. See related datasets for plant physiology, phenology, thaw depth and environmental conditions of the plots and warming chambers. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1971

Users manual for the Variable dimension Automatic Synthesis Program (VASP)

A dictionary and some problems for the Variable Automatic Synthesis Program VASP are submitted. The dictionary contains a description of each subroutine and instructions on its use. The example problems give the user a better perspective on the use of VASP for solving problems in modern control theory. These example problems include dynamic response, optimal control gain, solution of the sampled data matrix Ricatti equation, matrix decomposition, and pseudo inverse of a matrix. Listings of all subroutines are also included. The VASP program has been adapted to run in the conversational mode on the Ames 360/67 computer.

White, J. S.↗

NASA NTRS1975

The SAS-3 programmable telemetry system

Basic concept, system design and operation principles of the telemetry system developed for the Small Astronomy Satellite-3 (SAS-3) are analyzed. The concept of programmable format selected for the SAS-3 represents an optical combination of the fixed format system of SAS-1 and SAS-2, and the adaptive format concept. The programmable telemetry system permits a very wide range of changes in the data sampling order by a ground control station, depending on the experimental requirements, so that the maximal amount of useful data can be returned from orbit. The programmable system also allows the data format to differ from one spacecraft to another without changing hardware. Attention is given to the command requirements and redundancy of the SAS-3 telemetry system.

Peterson, M. R.↗

NASA NTRS1985

Tuning Concept for Resonant Cavities

Deviations from resonance detected by sampling phases. Automatic tuner feedback control system derives error signal from E and H plane probe signals. Control objective to maintain phase difference between E and H at 90 degrees. Technique estimated to sensitive to fractional frequency deviation of about 5 X 10-16 and applicable not only to masers but also other microwave elements, including klystrons, general purpose oscillators, and frequency standards.

Sydnor, R. L.↗

NASA NTRS1985

Development of a sensitivity analysis technique for multiloop flight control systems

This report presents the development and application of a sensitivity analysis technique for multiloop flight control systems. This analysis yields very useful information on the sensitivity of the relative-stability criteria of the control system, with variations or uncertainties in the system and controller elements. The sensitivity analysis technique developed is based on the computation of the singular values and singular-value gradients of a feedback-control system. The method is applicable to single-input/single-output as well as multiloop continuous-control systems. Application to sampled-data systems is also explored. The sensitivity analysis technique was applied to a continuous yaw/roll damper stability augmentation system of a typical business jet, and the results show that the analysis is very useful in determining the system elements which have the largest effect on the relative stability of the closed-loop system. As a secondary product of the research reported here, the relative stability criteria based on the concept of singular values were explored.

Vaillard, A. H.↗

NASA NTRS1986

Deep space network radio science system for Voyager Uranus and Galileo missions

An overview is presented of major new requirements, challenges and conceptual designs for the DSN Radio Science System in the 1985 to 1988 period. The Voyager Uranus encounter is being supported with larger combined aperture, higher sample rate, and a centrally controlled network. The Galileo mission will be provided with a high resolution S-Band Faraday rotation detection capability and a high-stability Doppler system with X-Band uplink for gravitational wave search.

Peng, T. K.↗

NASA NTRS1988

Stand For Infrared Multiple-Internal-Reflection Mount

Infrared MIR spectra more reproducible, and MIR crystal suffers less damage. Technique prevents lateral movement between elements in multiple-internal-reflection (MIR) cell during assembly. Reproducibility of infrared MIR spectra relies on ability to maintain condition of crystal, which is MIR element, and to control contact between crystal and sample. Cell used in infrared spectroscopy.

Long, Edward R., Jr.↗

NASA NTRS1987

Containerless processing of undercooled melts

Containerless drop tube processing allows for significant levels of liquid undercooling through control of parameters such as sample size, surface coating and cooling rate. A laboratory scale (3 m) drop tube has been developed which allows the undercooling and solidification behavior of powder samples to be evaluated under low gravity free-fall conditions. The level of undercooling obtained in an InSb-Sb eutectic alloy has been evaluated by comparing the eutectic spacing in drop tube samples with a spacing/undercooling relationship established using thermal analysis techniques. Undercoolings of 0.17 and 0.23 T(e) were produced by processing under vacuum and He gas conditions respectively. Alternatively, the formation of an amorphous phase in a Ni-Nb eutectic alloy indicates that undercooling levels of approximately 500 C were obtained by drop tube processing. The influence of droplet size and gas environment on undercooling behavior in the Ni-Nb eutectic was evaluated through their effect on the amorphous/crystalline phase ratio. To supplement the structural analysis, heat flow modeling has been developed to describe the undercooling history during drop tube processing, and the model has been tested experimentally.

Shong, D. S.↗

NASA NTRS1987

Containerless high-pressure petrology experiments in the microgravity environment of the Space Station

The genesis of igneous rocks on terrestrial planets can only be understood through experiments at pressures corresponding to those in planetary mantles (10 to 50 kbar). Such experiments typically require a piston-cylinder apparatus, and an apparatus that has the advantage of controllable pressure and temperature, adequate sample volume, rapid sample quench, and minimal danger of catastrophic failure. It is proposed to perform high-pressure and high-temperature piston-cylinder experiments aboard the Space Station. The microgravity environment in the Space Station will minimize settling due to density contrasts and may, thus, allow experiments of moderate duration to be performed without a platinoid capsule and without the sample having to touch the container walls. The ideal pressure medium would have the same temperatures. It is emphasized, however, that this proposed experimental capability requires technological advances and innovations not currently available.

Boynton, W. V.↗

NASA NTRS1990

The Meteorological Measurement System on the NASA ER-2 aircraft

A Meteorological Measurement System (MMS) was designed and installed on one of the NASA high-altitude ER-2 aircraft (NASA 706). The MMS provides in situ measurements of free-stream pressure (+ or - 0.3 mb), temperature (+ or - 0.3 C), and wind vector (+ or - 1 m/s). It incorporates a high-resolution inertial navigation system specially configured for scientific applications, a radome differential pressure system for measurements of the airflow angles, and a compact, computer-controlled data acquisition system to sample, process and store 45 variables on tape and on disk. The MMS hardware and software development is described, and resolution and accuracy of the instrumentation discussed. Custom software facilitates preflight system checkout, inflight data acquisition, and fast postflight data download. It accommodates various modes of MMS data: analog and digital, serial and parallel, and synchronous and asynchronous. Flight results are presented to demonstrate the capability of the system.

Scott, Stan G.↗

NASA NTRS1990

A new, simple electrostatic-acoustic hybrid levitator

Battelle has developed a hybrid levitator by combining the known single-axis acoustic standing wave levitator with a coaxial DC electric field. The resulting Coulomb forces on the charged liquid or solid sample support its weight and, together with the acoustic force, center the sample. Liquid samples with volumes approximately less than 100 micro-liters are deployed from a syringe reservoir into the acoustic pressure node. The sample is charged using a miniature high voltage power supply (approximately less than 20 kV) connected to the syringe needle. As the electric field, generated by a second miniature power supply, is increased, the acoustic intensity is reduced. The combination of both fields allows stable levitation of samples larger than either single technique could position on the ground. Decreasing the acoustic intensity reduces acoustic convection and sample deformation. Neither the electrostatic nor the acoustic field requires sample position sensing or active control. The levitator, now used for static and dynamic fluid physics investigations on the ground, can be easily modified for space operations.

Lierke, E. G.↗

NASA NTRS1991

Unusual materials effects observed on the thermal control surfaces experiment (S0069)

A number of unusual effects were observed on the Thermal Control Surface Experiment (TCSE) test samples, front cover, and structural components. These include induced UV fluorescence, the migration and degradation of KRS-5 materials, atomic oxygen effects, contamination, texturing, discoloration, and meteoroid/debris impact. LDEF (Long Duration Exposure Facility) mission induced fluorescence was observed on several TCSE samples. Similar fluorescence was observed on LDEF leading edge materials from Experiment A0114.

Zwiener, James M.↗

NASA NTRS1991

On-board processing architectures for satellite B-ISDN services

Onboard baseband processing architectures for future satellite broadband integrated services digital networks (B-ISDN's) are addressed. To assess the feasibility of implementing satellite B-ISDN services, critical design issues, such as B-ISDN traffic characteristics, transmission link design, and a trade-off between onboard circuit and fast packet switching, are analyzed. Examples of the two types of switching mechanisms and potential onboard network control functions are presented. A sample network architecture is also included to illustrate a potential onboard processing system.

Inukai, Thomas↗

NASA NTRS1991

The application of cost averaging techniques to robust control of the benchmark problem

A method is presented for the synthesis of robust controllers for linear time invariant systems with parameterized uncertainty structures. The method involves minimizing the average quadratic (H2) cost over the parameterized system. Bonded average cost implies stability over the set of systems. The average cost functional is minimized to derive robust fixed-order dynamic compensators. The robustness properties of these controllers are demonstrated on the sample problem.

Hagood, Nesbitt W.↗

NASA NTRS1992

On-board processing satellite network architectures for broadband ISDN

Inukai, Thomas↗