SEARCH · Engineering Papers

Results for “Conservation equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Prediction of a propellant tank pressure history using state space methods

An analysis of the time response of a propellant supply system operating in the blowdown mode is presented. The supply system is part of a pump-fed propulsion system intended for use on interplanetary spacecraft. As such, the supply system must provide the pump with propellant at sufficient pressure to avoid pump cavitation. The system, consisting of the tank, the liquid propellant, the pressurant gas and propellant vapor mixture, and a film layer separating the liquid and vapor phases, is analyzed using the principles of mass and energy conservation. The resulting set of ordinary, coupled, nonlinear differential equations for the thermodynamic state variables is integrated as an initial value problem. The resulting histories of total pressure, propellant vapor pressure, propellant liquid temperature, film layer temperature, propellant vapor/pressurant gas temperature, propellant vapor mass, and propellant liquid mass enable the calculation of the net positive suction head available at the pump which determines the viability of the pump-fed system concept when operated in the blowdown mode.

Estey, P. N.↗

NASA NTRS1983

Analysis of aerothermal loads on spherical dome protuberances

Hypersonic flow over spherical dome protuberances was investigated to determine increased pressure and heating loads to the surface. The configuration was mathematically modeled in a time-dependant three-dimensional analysis of the conservation of mass, momentum (Navier-Stokes), and energy equations. A boundary mapping techique was used to obtain a rectangular parallelepiped computational domain, and a MacCormack explicit time-split predictor-corrector finite difference algorithm was used to obtain solutions. Results show local pressures and heating rates for domes one-half, one, and two boundary layer thicknesses high were increased by factors on the order of 1.4, 2, and 6, respectively. However, because lee-side pressure and thermal loads were reduced the two lower height domes did not experience any net increase in total loads. The total loads on the higher dome were increased by twenty-five percent. Flow over the lower dome was everywhere attached while flow over the intermediate dome had small windward and leeside separations. The higher dome had an unsteady windward separation region and a large leeside separation region. Trailing vortices form on all domes with intensity increasing with dome height. Discussions of applying the results to a thermally bowed thermal protection system are presented.

Olsen, G. C.↗

NASA NTRS1983

A unified mathematical theory of electrophoretic processes

A mathematical theory is presented which shows that each of the four classical electrophoretic modes (zone electrophoresis, moving boundary electrophoresis, isotachophoresis, and isoelectric focusing) is based on the same general principles and can collectively be described in terms of a single set of equations. This model can predict the evolution of the four electrophoretic modes as a function of time. The model system is one-dimensional, neglecting the effects of electroosmosis, temperature gradients, and any bulk flows of liquid. The model is based on equations which express the components' dissociation equilibria, the mass transport due to electromigration and diffusion, electroneutrality, and the conservation of mass and charge. The model consists of a system of coupled partial differential and nonlinear algebraic equations which can be solved numerically by use of a computer. The versatility of this model was verified using an example of a three-component system containing cacodylate, tris hydroxylmethylaminomethane, and histidine. Results show that this model not only correctly predicts the characteristic features of each electrophoretic mode, but also gives details of the concentration, pH, and conductivity profiles not easily amenable to direct experimental measurement.

Bier, M.↗

NASA NTRS1987

Toward a model for leveed lava flows

Many lava flows have two distinct volumetric components during emplacement. First, there is a component actively flowing in accordance with Newtonian or other constitutive relations. Second, there may be an inactive, stationary component that is no longer participating in the forward movement of the flow. Such passive components may take the form of flow-confining levees, solidified lateral margins, overspilling, plating, small ponds and sidestreams, or a lava tube. To describe the conservation of flow volume for the active component, governing equations are given and discussed.

Baloga, Stephen↗

NASA NTRS1988

Numerical modeling of multidimensional flow in seals and bearings used in rotating machinery

The rotordynamic behavior of turbomachinery is critically dependent on fluid dynamic rotor forces developed by various types of seals and bearings. The occurrence of self-excited vibrations often depends on the rotor speed and load. Misalignment and rotor wobbling motion associated with differential clearance were often attributed to stability problems. In general, the rotative character of the flowfield is a complex three dimensional system with secondary flow patterns that significantly alter the average fluid circumferential velocity. A multidimensional, nonorthogonal, body-fitted-grid fluid flow model is presented that describes the fluid dynamic forces and the secondary flow pattern development in seals and bearings. Several numerical experiments were carried out to demonstrate the characteristics of this complex flowfield. Analyses were performed by solving a conservation form of the three dimensional Navier-Stokes equations transformed to those for a rotating observer and using the general-purpose computer code PHOENICS with the assumptions that the rotor orbit is circular and that static eccentricity is zero. These assumptions have enabled a precise steady-state analysis to be used. Fluid injection from ports near the seal or bearing center increased fluid-film direct dynamic stiffness and, in some cases, significantly increased quadrature dynamic stiffness. Injection angle and velocity could be used for active rotordynamic control; for example, injection, when compared with no injection, increased direct dynamic stiffness, which is an important factor for hydrostatic bearings.

Hendricks, R. C.↗

NASA NTRS1987

Numerical and analytical study of fluid dynamic forces in seals and bearings

A numerical model based on a transformed, conservative form of the three dimensional Navier-Stokes equation and an analytical model based on lumped fluid parameters are presented and compared with studies of modeled rotor bearing seal systems. The rotor destabilizing factors are related to the rotative character of the flow field. It is shown that these destabilizing factors can be reduced through a decrease in the fluid average circumferential velocity. However, the rotative character of the flow field is a complex three dimensional system with bifurcated secondary flow patterns that significantly alter the fluid circumferential velocity. By transforming the Navier-Stokes equations to those for a rotating observer and using the numerical code PHOENICS-84 with a nonorthogonal body fitted grid, several numerical experiments were carried out to demonstrate the character of this complex flow field. In general, fluid injection and/or preswirl of the flow field opposing the shaft rotation significantly intensified these secondary recirculation zones and thus reduced the average circumferential velocity; injection or preswirl in the direction of rotation significantly weakened these zones.

Tam, L. T.↗

NASA NTRS1988

A near-wall turbulence model and its application to fully developed turbulent channel and pipe flows

A near wall turbulence model and its incorporation into a multiple-time-scale turbulence model are presented. In the method, the conservation of mass, momentum, and the turbulent kinetic energy equations are integrated up to the wall; and the energy transfer rate and the dissipation rate inside the near wall layer are obtained from algebraic equations. The algebraic equations for the energy transfer rate and the dissipation rate inside the near wall layer were obtained from a k-equation turbulence model and the near wall analysis. A fully developed turbulent channel flow and fully developed turbulent pipe flows were solved using a finite element method to test the predictive capability of the turbulence model. The computational results compared favorably with experimental data. It is also shown that the present turbulence model could resolve the over shoot phenomena of the turbulent kinetic energy and the dissipation rate in the region very close to the wall.

Kim, S.-W.↗

NASA NTRS1989

Evaluation of the split cantilever beam for Mode 3 delamination testing

A test rig for testing a thick split cantilever beam for scissoring delamination (mode 3) fracture toughness was developed. A 3-D finite element analysis was conducted on the test specimen to determine the strain energy release rate, G, distribution along the delamination front. The virtual crack closure technique was used to calculate the G components resulting from interlaminar tension, GI, interlaminar sliding shear, GII, and interlaminar tearing shear, GIII. The finite element analysis showed that at the delamination front no GI component existed, but a GII component was present in addition to a GIII component. Furthermore, near the free edges, the GII component was significantly higher than the GIII component. The GII/GIII ratio was found to increase with delamination length but was insensitive to the beam depth. The presence of GII at the delamination front was verified experimentally by examination of the failure surfaces. At the center of the beam, where the failure was in mode 3, there was significant fiber bridging. However, at the edges of the beam where the failure was in mode 3, there was no fiber bridging and mode 2 shear hackles were observed. Therefore, it was concluded that the split cantilever beam configuration does not represent a pure mode 3 test. The experimental work showed that the mode 2 fracture toughness, GIIc, must be less than the mode 3 fracture toughness, GIIIc. Therefore, a conservative approach to characterizing mode 3 delamination is to equate GIIIc to GIIc.

Martin, Roderick H.↗

NASA NTRS1988

Extensions of the CSCM methodology for nonequilibrium reacting gas flows

The paper describes the extension of the CSCM flux difference splitting to produce conservative unconditionally stable implicit upwind methods for the extended equation set. The CSCM-S single data level relaxation algorithm is argued to be particularly advantageous for efficiently solving the set of equations. Attention is given to issues of alternative state variable representations and to complementary thermodynamic relations that parameterize and need to be effectively coupled with the solution procedure for the partial differential equations. Within the framework of iteration, consideration is given to more efficient approximate solution procedures than the full block coupled LU decomposition. Results of early numerical experiments are given to illustrate the developments.

Lombard, C. K.↗

NASA NTRS1990

A numerical simulation of the flow in the diffuser of the NASA Lewis icing research tunnel

The flow in the diffuser section of the Icing Research Tunnel at the NASA Lewis Research Center is numerically investigated. To accomplish this, an existing computer code is utilized. The code, known as PARC3D, is based on the Beam-Warming algorithm applied to the strong conservation law form of the complete Navier-Stokes equations. The first portion of the paper consists of a brief description of the diffuser and its current flow characteristics. A brief discussion of the code work follows. Predicted velocity patterns are then compared with the measured values.

Addy, Harold E., Jr.↗

NASA NTRS1990

A numerical simulation of the flow in the diffuser of the NASA Lewis Icing Research Tunnel

Addy, Harold E., Jr.↗

NASA NTRS1990

Euler solutions for self-generated rotor blade-vortex interactions

A finite-difference procedure was developed, on the basis of the conservation form of the unsteady three-dimensional Euler equations, for the prediction of rotor blade-vortex interactions (BVIs). Numerical solution procedures were obtained for the analysis of the model parallel BVIs and the more realistic helicopter self-generated-rotor BVIs. It was found that, for self-generated subcritical interactions, the accuracy of the predicted leading edge pressures relied heavily on the user-specified vortex core radius and on the CAMRAD-code-predicted geometry of the interaction vortex elements and their relative orientation with respect to the blade. It was also found that the free-wake model used in CAMRAD to predict the tip vortex trajectory for use in the Euler solution yields lower streamwise and higher axial wake convective velocities than those inferred from the experimental data.

Hassan, A. A.↗

NASA NTRS1990

CFD spinoff - Computational electromagnetics for radar cross section (RCS) studies

A finite-volume discretization procedure derived from proven CFD methods is used to solve the conservation form of the time-domain Maxwell's equations, in order to compute EM scattering from layered objects. This time-domain approach handles both single-frequency/continuous wave and broadband-frequency/pulse incident excitation. Arbitrarily shaped objects are modeled by means of a body-fitted coordinate transformation; complex internal/external structures with many material layers are treated through the implementation of a multizone framework capable of handling any type of zonal boundary condition. Results are presented for various two- and three-dimensional problems.

Shankar, Vijaya↗

NASA NTRS1991

A Runge-Kutta discontinuous finite element method for high speed flows

A Runge-Kutta discontinuous finite element method is developed for hyperbolic systems of conservation laws in two space variables. The discontinuous Galerkin spatial approximation to the conservation laws results in a system of ordinary differential equations which are marched in time using Runge-Kutta methods. Numerical results for the two-dimensional Burger's equation show that the method is (p+1)-order accurate in time and space, where p is the degree of the polynomial approximation of the solution within an element and is capable of capturing shocks over a single element without oscillations. Results for this problem also show that the accuracy of the solution in smooth regions is unaffected by the local projection and that the accuracy in smooth regions increases as p increases. Numerical results for the Euler equations show that the method captures shocks without oscillations and with higher resolution than a first-order scheme.

Bey, Kim S.↗

NASA NTRS1991

Evaluation of the split cantilever beam for mode III delamination testing

Martin, Roderick, H.↗

NASA NTRS1993

Alternative descriptions of wave and particle aspects of the harmonic oscillator

The dynamical properties of the wave and particle aspects of the harmonic oscillator can be studied with the help of the time-dependent Schroedinger equation (SE). Especially the time-dependence of maximum and width of Gaussian wave packet solutions allow to show the evolution and connections of those two complementary aspects. The investigation of the relations between the equations describing wave and particle aspects leads to an alternative description of the considered systems. This can be achieved by means of a Newtonian equation for a complex variable in connection with a conservation law for a nonclassical angular momentum-type quantity. With the help of this complex variable, it is also possible to develop a Hamiltonian formalism for the wave aspect contained in the SE, which allows to describe the dynamics of the position and momentum uncertainties. In this case the Hamiltonian function is equivalent to the difference between the mean value of the Hamiltonian operator and the classical Hamiltonian function.

Schuch, Dieter↗

NASA NTRS1995

Conservative properties of finite difference schemes for incompressible flow

The purpose of this research is to construct accurate finite difference schemes for incompressible unsteady flow simulations such as LES (large-eddy simulation) or DNS (direct numerical simulation). In this report, conservation properties of the continuity, momentum, and kinetic energy equations for incompressible flow are specified as analytical requirements for a proper set of discretized equations. Existing finite difference schemes in staggered grid systems are checked for satisfaction of the requirements. Proper higher order accurate finite difference schemes in a staggered grid system are then proposed. Plane channel flow is simulated using the proposed fourth order accurate finite difference scheme and the results compared with those of the second order accurate Harlow and Welch algorithm.

Morinishi, Youhei↗

NASA NTRS2003

Time as an Observable in Nonrelativistic Quantum Mechanics

The argument follows from the viewpoint that quantum mechanics is taken not in the usual form involving vectors and linear operators in Hilbert spaces, but as a boundary value problem for a special class of partial differential equations-in the present work, the nonrelativistic Schrodinger equation for motion of a structureless particle in four- dimensional space-time in the presence of a potential energy distribution that can be time-as well as space-dependent. The domain of interest is taken to be one of two semi-infinite boxes, one bounded by two t=constant planes and the other by two t=constant planes. Each gives rise to a characteristic boundary value problem: one in which the initial, input values on one t=constant wall are given, with zero asymptotic wavefunction values in all spatial directions, the output being the values on the second t=constant wall; the second with certain input values given on both z=constant walls, with zero asymptotic values in all directions involving time and the other spatial coordinates, the output being the complementary values on the z=constant walls. The first problem corresponds to ordinary quantum mechanics; the second, to a fully time-dependent version of a problem normally considered only for the steady state (time-independent Schrodinger equation). The second problem is formulated in detail. A conserved indefinite metric is associated with space-like propagation, where the sign of the norm of a unidirectional state corresponds to its spatial direction of travel.

Hahne, G. E.↗