Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Component amounts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Experimental and computing strategies in advanced material characterization problems

The mechanical characterization of materials relies more and more often on sophisticated experimental methods that permit to acquire a large amount of data and, contemporarily, to reduce the invasiveness of the tests. This evolution accompanies the growing demand of non-destructive diagnostic tools that assess the safety level of components in use in structures and infrastructures, for instance in the strategic energy sector. Advanced material systems and properties that are not amenable to traditional techniques, for instance thin layered structures and their adhesion on the relevant substrates, can be also characterized by means of combined experimental-numerical tools elaborating data acquired by full-field measurement techniques. In this context, parameter identification procedures involve the repeated simulation of the laboratory or in situ tests by sophisticated and usually expensive non-linear analyses while, in some situation, reliable and accurate results would be required in real time. The effectiveness and the filtering capabilities of reduced models based on decomposition and interpolation techniques can be profitably used to meet these conflicting requirements. This communication intends to summarize some results recently achieved in this field by the author and her co-workers. The aim is to foster further interaction between engineering and mathematical communities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NTT, SPITZER, AND CHANDRA SPECTROSCOPY OF SDSSJ095209.56+214313.3: THE MOST LUMINOUS CORONAL-LINE SUPERNOVA EVER OBSERVED, OR A STELLAR TIDAL DISRUPTION EVENT?

The galaxy SDSSJ095209.56+214313.3 (SDSSJ0952+2143 hereafter) showed remarkable emission-line and continuum properties and strong emission-line variability first reported in 2008 (Paper I). The spectral properties and low-energy variability are the consequence of a powerful high-energy flare which was itself not observed directly. Here we report follow-up optical, near-infrared (NIR), mid-infrared (MIR), and X-ray observations of SDSSJ0952+2143. We discuss outburst scenarios in terms of stellar tidal disruption by a supermassive black hole, peculiar variability of an active galactic nucleus (AGN), and a supernova (SN) explosion, and possible links between these scenarios and mechanisms. The optical spectrum of SDSSJ0952+2143 exhibits several peculiarities: an exceptionally high ratio of [Fe VII] transitions over [O III], a dramatic decrease by a factor of 10 of the highest-ionization coronal lines, a very unusual and variable Balmer line profile including a triple-peaked narrow component with two unresolved horns, and a large Balmer decrement. The MIR emission measured with the Spitzer IRS in the narrow 10-20 {mu}m band is extraordinarily luminous and amounts to L {sub 10-20{mu}}{sub m} = 3.5 x 10{sup 43} erg s{sup -1}. The IRS spectrum shows a bump around {approx}11 {mu}m and an increase toward longer wavelengths, reminiscent of silicate emission. The strong MIR excess over the NIR implies the dominance of relatively cold dust. The pre- and post-flare NIR host galaxy colors indicate a nonactive galaxy. The X-ray luminosity of L {sub x,0.1-10keV} = 10{sup 41} erg s{sup -1} measured with Chandra is below that typically observed in AGNs. Similarities of SDSSJ0952+2143 with some extreme SNe suggest the explosion of a SN of Type IIn. However, an extreme accretion event in a low-luminosity AGN or inactive galaxy, especially stellar tidal disruption, remain possibilities, which could potentially produce a very similar emission-line response. If indeed a SN, SDSSJ0952+2143 is one of the most distant X-ray- and MIR-detected SNe known so far, the most MIR luminous, and one of the most X-ray luminous. It is also by far the most luminous (>10{sup 40} erg s{sup -1}) in high-ionization coronal lines, exceeding previous SNe by at least a factor of 100.

99 GENERAL AND MISCELLANEOUS↗

ISOTROPIC ACTIVE GALACTIC NUCLEUS HEATING WITH SMALL RADIO-QUIET BUBBLES IN THE NGC 5044 GROUP

A Chandra observation of the X-ray bright group NGC 5044 shows that the X-ray emitting gas has been strongly perturbed by recent outbursts from the central active galactic nucleus (AGN) and also by motion of the central dominant galaxy relative to the group gas. The NGC 5044 group hosts many small radio-quiet cavities with a nearly isotropic distribution, cool filaments, a semi-circular cold front, and a two-armed spiral shaped feature of cool gas. A Giant Metrewave Radio Telescope (GMRT) observation of NGC 5044 at 610 MHz shows the presence of extended radio emission with a 'torus-shaped' morphology. The largest X-ray filament appears to thread the radio torus, suggesting that the lower entropy gas within the filament is material being uplifted from the center of the group. The radio emission at 235 MHz is much more extended than the emission at 610 MHz, with little overlap between the two frequencies. One component of the 235 MHz emission passes through the largest X-ray cavity and is then deflected just behind the cold front. A second detached radio lobe is also detected at 235 MHz beyond the cold front. All of the smaller X-ray cavities in the center of NGC 5044 are undetected in the GMRT observations. Since the smaller bubbles are probably no longer momentum driven by the central AGN, their motion will be affected by the group 'weather' as they buoyantly rise outward. Hence, most of the enthalpy within the smaller bubbles will likely be deposited near the group center and isotropized by the group weather. The total mechanical power of the smaller radio quiet cavities is P{sub c} = 9.2 x 10{sup 41} erg s{sup -1} which is sufficient to suppress about one-half of the total radiative cooling within the central 10 kpc. This is consistent with the presence of Halpha emission within this region which shows that at least some of the gas is able to cool. The mechanical heating power of the larger southern cavity, located between 10 and 20 kpc, is six times greater than the combined mechanical power of the smaller radio-quiet cavities and could suppress all radiative cooling within the central 25 kpc if the energy were deposited and isotropized within this region. Within the central 20 kpc, emission from low-mass X-ray binaries (LMXBs) is a significant component of the X-ray emission above 2 keV. The presence of hard X-ray emission from unresolved LMXBs makes it difficult to place strong constraints on the amount of shock heated gas within the X-ray cavities.

79 ASTRONOMY AND ASTROPHYSICS↗

THE COSMIC NEAR INFRARED BACKGROUND. III. FLUCTUATIONS, REIONIZATION, AND THE EFFECTS OF MINIMUM MASS AND SELF-REGULATION

Current observations suggest that the universe was reionized sometime before z {approx} 6. One way to observe this epoch of the universe is through the Near Infrared Background (NIRB), which contains information about galaxies which may be too faint to be observed individually. We calculate the angular power spectrum (C{sub l} ) of the NIRB fluctuations caused by the distribution of these galaxies. Assuming a complete subtraction of any post-reionization component, C{sub l} will be dominated by galaxies responsible for completing reionization (e.g., z {approx} 6). The shape of C{sub l} at high l is sensitive to the amount of nonlinear bias of dark matter halos hosting galaxies. As the nonlinear bias depends on the mass of these halos, we can use the shape of C{sub l} to infer typical masses of dark matter halos responsible for completing reionization. We extend our previous study by using a higher-resolution N-body simulation, which can resolve halos down to 10{sup 8} M{sub Sun }. We also include improved radiative transfer, which allows for the suppression of star formation in small-mass halos due to photoionization heating. As the nonlinear bias enhances the dark matter halo power spectrum on small scales, we find that C{sub l} is steeper for the case with a complete suppression of small sources or partial suppression of star formation in small halos (the minimum galaxy mass is M{sub min} = 10{sup 9} M{sub Sun} in ionized regions and M{sub min} = 10{sup 8} M{sub Sun} in neutral regions) than for the case in which these small halos were unsuppressed. In all cases, we do not see a turnover toward high l in the shape of l{sup 2} C{sub l} .

79 ASTRONOMY AND ASTROPHYSICS↗

FLARE RIBBON ENERGETICS IN THE EARLY PHASE OF AN SDO FLARE

The sites of chromospheric excitation during solar flares are marked by extended extreme ultraviolet ribbons and hard X-ray (HXR) footpoints. The standard interpretation is that these are the result of heating and bremsstrahlung emission from non-thermal electrons precipitating from the corona. We examine this picture using multi-wavelength observations of the early phase of an M-class flare SOL2010-08-07T18:24. We aim to determine the properties of the heated plasma in the flare ribbons, and to understand the partition of the power input into radiative and conductive losses. Using GOES, SDO/EVE, SDO/AIA, and RHESSI, we measure the temperature, emission measure (EM), and differential emission measure of the flare ribbons, and deduce approximate density values. The non-thermal EM, and the collisional thick target energy input to the ribbons are obtained from RHESSI using standard methods. We deduce the existence of a substantial amount of plasma at 10 MK in the flare ribbons, during the pre-impulsive and early-impulsive phase of the flare. The average column EM of this hot component is a few times 10{sup 28} cm{sup -5}, and we can calculate that its predicted conductive losses dominate its measured radiative losses. If the power input to the hot ribbon plasma is due to collisional energy deposition by an electron beam from the corona then a low-energy cutoff of {approx}5 keV is necessary to balance the conductive losses, implying a very large electron energy content. Independent of the standard collisional thick-target electron beam interpretation, the observed non-thermal X-rays can be provided if one electron in 10{sup 3}-10{sup 4} in the 10 MK (1 keV) ribbon plasma has an energy above 10 keV. We speculate that this could arise if a non-thermal tail is generated in the ribbon plasma which is being heated by other means, for example, by waves or turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for gamma-ray emission from dark matter annihilation in the large magellanic cloud with the fermi large area telescope

At a distance of 50 kpc and with a dark matter mass of ~10 10 M ⊙ , the large magellanic cloud (LMC) is a natural target for indirect dark matter searches. We use five years of data from the Fermi Large Area Telescope (LAT) and updated models of the gamma-ray emission from standard astrophysical components to search for a dark matter annihilation signal from the LMC. We perform a rotation curve analysis to determine the dark matter distribution, setting a robust minimum on the amount of dark matter in the LMC, which we use to set conservative bounds on the annihilation cross section. The LMC emission is generally very well described by the standard astrophysical sources, with at most a 1–2σ excess identified near the kinematic center of the LMC once systematic uncertainties are taken into account. As a result, we place competitive bounds on the dark matter annihilation cross section as a function of dark matter particle mass and annihilation channel.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Turbulent Cascade at 1 AU in High Cross-Helicity Flows

Analysis of the scaling of the mixed third moments of velocity and magnetic fluctuations in the solar wind plasma, and the energy cascade rates derived from the scaling, reveal a strong dependence on the amount of cross-field correlation between the velocity and magnetic field fluctuations. When the correlation is greater than about 75%, the cascade rate of the outward-propagating (majority) component, and of the total energy and the cross-helicity are surprisingly negative. This indicates a back transfer of energy from small to large scales within the inertial range of the dominant outward-propagating component. It is clear that the transfer of energy acts to reinforce the dominance of the outward-propagating (majority) component and may explain, in part, the persistent observations of large cross-field correlations that have been a defining aspect of solar wind physics for almost 40 years.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-omic characterization of a soil microbial consortium reveals critical role of succinate and glutamate metabolism during calcium carbonate precipitation

Microbially induced calcium carbonate precipitation (MICP) holds potential for use in soil stabilization and carbon sequestration, with the overall efficiency of the process being a major determinant for use in many environmental and civil engineering applications. While the biogeochemical pathways and enzymes driving MICP are known, the microbial metabolic networks and community dynamics underlying such precipitation remain poorly characterized. To address this gap, we developed a four-member consortium of soil bacteria (Curtobacterium flaccumfaciens, Rhodococcus qingshengii, Microbacterium sp., and Bacillus toyonensis), termed carbon storing consortium - A (CSC-A), that is capable of MICP. Prior work shows that MICP production is higher in CSC-A compared to the sum of carbonate produced by each member, suggesting carbonate production is driven by consortium dynamics. To that end we used a multi-omic integration approach of genomics, transcriptomics, and metabolomics to investigate potential inter-species interactions that may influence the MICP phenotype. Genomic life history characterizations identified evidence of niche specialization by B. toyonensis and Microbacterium, while metatranscriptomic analysis suggests R. qingshengii is a keystone species during growth in urea. By comparing individual species’ metabolomes to the metabolic profile of a shared well of precipitated metabolites, we identified over 200 metabolites predicted to be produced or consumed by CSC-A members. Integrating both data types to search the KEGG reactome highlighted a network centered around glutamine metabolism and branched chain amino acid biosynthesis under regulation during CSC-A growth in urea. Succinate metabolism was also a major node in this network and laboratory assays confirmed that increasing the amount of succinate in the growth medium leads to increased carbonate precipitation by CSC-A, a critical confirmation of our modeling approach. By isolating and identifying the interconnected metabolic components underlying MICP in CSC-A, we identified keystone taxa, metabolites, and pathways important for future optimization of the application of this consortia to carbonate precipitation.

carbon storing consortium - A (CSC-A)↗

DEVELOPMENT OF A SOFTWARE DESIGN TOOL FOR HYBRID SOLAR-GEOTHERMAL HEAT PUMP SYSTEMS IN HEATING- AND COOLING-DOMINATED BUILDINGS

This project provides an easy-to-use, menu-driven, software tool for designing hybrid solar-geothermal heat pump systems (GHP) for both heating- and cooling-dominated buildings. No such design tool currently exists. In heating-dominated buildings, the design approach takes advantage of glazed solar collectors to effectively balance the annual thermal loads on the ground with renewable solar energy. In cooling-dominated climates, the design approach takes advantage of relatively low-cost, unglazed solar collectors as the heat rejecting component. The primary benefit of hybrid GHPs is the reduced initial cost of the ground heat exchanger (GHX). Furthermore, solar thermal collectors can be used to balance the ground loads over the annual cycle, thus making the GHX fully sustainable; in heating-dominated buildings, the hybrid energy source (i.e., solar) is renewable, in contrast to a typical fossil fuel boiler or electric resistance as the hybrid component; in cooling-dominated buildings, use of unglazed solar collectors as a heat rejecter allows for passive heat rejection, in contrast to a cooling tower that consumes a significant amount of energy to operate, and hybrid GHPs can expand the market by allowing reduced GHX footprint in both heating- and cooling-dominated climates. The design tool allows for the straight-forward design of innovative GHP systems that currently pose a significant design challenge. The project lays the foundations for proper and reliable design of hybrid GHP systems, overcoming a series of difficult and cumbersome steps without the use of a system simulation approach, and without an automated optimization scheme. As new technologies and design concepts emerge, sophisticated design tools and methodologies must accompany them and be made usable for practitioners. Lack of reliable design tools results in reluctance of practitioners to implement more complex systems. A menu-driven software tool for the design of hybrid solar GHP systems is provided that is based on mathematically robust, validated models. An automated optimization tool is used to balance ground loads and incorporated into the simulation engine. With knowledge of the building loads, thermal properties of the ground, the borehole heat exchanger configuration, the heat pump peak hourly and seasonal COP for heating and cooling, the critical heat pump design entering fluid temperature, and the thermal performance of a solar collector, the total GHX length can be calculated along with the area of a supplemental solar collector array and the corresponding reduced GHX length. An economic analysis module allows for the calculation of the lowest capital cost combination of solar collector area and GHX length. ACKNOWLEDGMENTS This project was funded by the United States Department of Energy DOE-DE-FOA-0000116, Recovery Act Geothermal Technologies Program: Ground Source Heat Pumps. The lead contractor, The University of Hartford, was supported by The University of Dayton, and the Oak Ridge National Laboratories. All funding and support for this project as well as contributions of graduate and undergraduate students from the contributing institutions are gratefully acknowledged.

14 SOLAR ENERGY↗

Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes

The goal of this research is to provide durable and long-term water management solutions using exterior insulating sheathing as part of the water management system. It is possible to tape or seal the joints in insulating sheathing to create a drainage plane and even an air control layer. There exists the material durability component of the tape as well as the system durability component being the taped insulating sheathing as the drainage plane. This measure guideline provides best practice and product recommendations from the interviewed contractors and homebuilders who collectively have a vast amount of experience. Three significant issues were discussed with the group, which are required to make taped insulating sheathing a simple, long-term, and durable drainage plane: horizontal joints should be limited or eliminated wherever possible; where a horizontal joint exists use superior materials; and frequent installation inspection and regular trade training are required to maintain proper installation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Low-Mass Dark Matter Search Results and Radiogenic Backgrounds for the Cryogenic Dark Matter Search

An ever-increasing amount of evidence suggests that approximately one quarter of the energy in the universe is composed of some non-luminous, and hitherto unknown, “dark matter”. Physicists from numerous sub-fields have been working on and trying to solve the dark matter problem for decades. The common solution is the existence of some new type of elementary particle with particular focus on weakly interacting massive particles (WIMPs). One avenue of dark matter research is to create an extremely sensitive particle detector with the goal of directly observing the interaction of WIMPs with standard matter. The Cryogenic Dark Matter Search (CDMS) project operated at the Soudan Underground Laboratory from 2003–2015, under the CDMS II and SuperCDMS Soudan experiments, with this goal of directly detecting dark matter. The next installation, SuperCDMS SNOLAB, is planned for near-future operation. The reason the dark-matter particle has not yet been observed in traditional particle physics experiments is that it must have very small cross sections, thus making such interactions extremely rare. In order to identify these rare events in the presence of a background of known particles and interactions, direct detection experiments employ various types and amounts of shielding to prevent known backgrounds from reaching the instrumented detector(s). CDMS utilized various gamma and neutron shielding to such an effect that the shielding, and other experimental components, themselves were sources of background. These radiogenic backgrounds must be understood to have confidence in any WIMP-search result. For this dissertation, radiogenic background studies and estimates were performed for various analyses covering CDMS II, SuperCDMS Soudan, and SuperCDMS SNOLAB. Lower-mass dark matter t c2 inent in the past few years. The CDMS detectors can be operated in an alternative, higher-biased, mode v to decrease their energy thresholds and correspondingly increase their sensitivity to low-mass WIMPs. This is the CDMS low ionization threshold experiment (CDMSlite), which has pushed the frontier at lower WIMP masses. This dissertation describes the second run of CDMSlite at Soudan: its hardware, operations, analysis, and results. The results include new WIMP mass-cross section upper limits on the spin-independent and spin-dependent WIMP-nucleon interactions. Thanks to the lower background and threshold in this run compared to the first CDMSlite run, these limits are the most sensitive in the world below WIMP masses of ⇠4 GeV/c2. This demonstrates also the great promise and utility of the high-voltage operating mode in the SuperCDMS SNOLAB experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis of Tank 38H (HTF-38-20-7, -8) and tank 43H (HTF-43-20-9, -10) samples for Support of the Enrichment Control and Corrosion Control Programs

SRNL analyzed samples from Tank 38H and Tank 43H to support ECP and CCP. The results indicate the concentrations of most species in the Tank 38H surface sample decreased significantly from the previous surface sample. The Tank 38H sub-surface sample shows only small changes in concentration for most major species in the solution from the previous sample. The large differences in the concentrations of major components between the Tank 38H surface and sub-surface samples indicate significant stratification of solution species within the tank. The Tank 38H sub-surface sample contained a small amount of sludge solids (<1 wt%).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NRAP-Open-IAM Multisegmented Wellbore Reduced-Order Model: Improvement and Quality Assurance

The multisegmented wellbore model (MSW) semi-analytically estimates the amount of CO 2 and brine leakage from a leaking legacy well by segmenting it into intervals to simulate site-specific stratigraphic and hydrogeologic properties. The model is a component of the National Risk Assessment Partnership Open-Source Integrated Assessment Model (NRAP-Open-IAM), which was developed to perform risk assessment for geologic CO 2 storage. The new wellbore leakage model, which uses deep learning networks for a caprock segment, was developed to enhance the analytical MSW. The model was trained and validated using a synthetic data set of Subsurface Transport Over Multiple Phases (STOMP) multiphase flow simulations from various geological, well attribute, and operational conditions to ensure its quality. The results demonstrate that the model is more accurate than the existing model in predicting the transport of two-phase fluids (brine and injected CO 2 ) through the well. This report provides a detailed explanation of the model development and quality assurance.

58 GEOSCIENCES↗

FOR-868 Microreactor Applications Research Validation and Evaluation (MARVEL) Project

The Microreactor Applications Research Validation and Evaluation (MARVEL) reactor will offer experimental capabilities that are not currently available at DOE’s national laboratories. The test bed will perform R&D on the fundamental features, operations, and behaviors of microreactor technologies and help industry partners quickly test, develop, and demonstrate their technologies. The liquid- metal cooled microreactor will produce energy using small amounts of high- assay, low-enriched uranium (HALEU) from available research materials. Its design is primarily based on existing technology and will be built using off-the- shelf components to the extent practical. The reactor will be built inside the Transient Reactor Test (TREAT) Facility Micro-Reactor Experiment Cell (T- REXC), a separate project governed by the requirements of FOR-684, “Transient Reactor Test (TREAT) Facility Micro-Reactor Experiment Cell (T REXC),” and outside the scope of this document.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

G2 and Sgr A *: A Cosmic Fizzle at the Galactic Center

We carry out a series of simulations of G2-type clouds interacting with the black hole at the galactic center, to determine why no large changes in the luminosity of Sgr A * were seen, and to determine the nature of G2. We measure the accretion rate from the gas cloud onto Sgr A * for a range of simulation parameters, such as cloud structure, background structure, background density, grid resolution, and accretion radius. For a broad range of parameters, the amount of cloud material accreted is small relative to the amount of background material accreted. The total accretion rate is not significantly effected for at least 30 yr after periapsis. We find that reproducing observations of G2 likely requires two components for the object: an extended, cold gas cloud responsible for the Br- γ emission, and a compact core or dusty stellar object dominating the bolometric luminosity. In simulations, the bolometric and X-ray luminosity have a peak lasting from about one year before to one year after periapsis, a feature not detected in observations. Our simulated Br- γ emission is largely consistent with observations leading up to periapsis, with a slight increase in luminosity and a large increase in the FWHM of the line velocity. All emission from a gaseous component of G2 should fade rapidly after periapsis and be undetectable after one year, due to shock heating and expansion of the cloud. Any remaining emission should be from the compact component of G2.

79 ASTRONOMY AND ASTROPHYSICS↗

Petrographic and petrological studies of lunar rocks

Clasts, rind glass, matrix glass, and matrix minerals from five Apollo 15 glass-coated breccias (15255, 15286, 15465, 15466, and 15505) were studied optically and with the SEM/microprobe. Rind glass compositions differ from sample to sample, but are identical, or nearly so, to the local soil, suggesting their origin by fusion of that soil. Most breccia samples contain green or colorless glass spheres identical to the Apollo 15 green glasses. These glasses, along with other glass shards and fragments, indicate a large soil component is present in the breccias. Clast populations include basalts and gabbros containing phases highly enriched in iron, indicative of extreme differentiation or fractional crystallization. Impact melts, anorthosites, and minor amounts of ANT suite material are also present among the clasts. Tektite glasses, impact melts, and breccias from the Zhamanshin structure, USSR, were also studied. Basic tektite glasses were found to be identical in composition to impact melts from the structure, but no satisfactory parent material has been identified in the limited suite of samples available.

Winzer, S. R.↗

Low-cost LANDSAT processing system

LANDSAT analysis system is assembled from commercially available components at relatively low cost. Small-scale system is put together for price affordable for state agencies and universities. It processes LANDSAT data for subscene areas on repetitive basis. Amount of time required for processing decreases linearly with number of classifications desired. Computer programs written in FORTRAN IV are available for analyzing data.

Faust, N. L.↗

Interferometer

An interferometer of relatively simple design which is tilt compensated, and which facilitates adjustment of the path lengths of split light beams is described. The interferometer includes a pair of plate-like elements with a dielectric coating and an oil film between them, that forms a beamsplitter interface, and with a pair of reflector surfaces at the ends of the plates. A pair of retroreflectors are positioned so that each split beam component is directed by a retroreflector onto one of the reflector surfaces and is then returned to the beamsplitter interface, so that the reflector surfaces tilt in a direction and amount that compensates for tilting of the beamsplitter interface.

Breckinridge, J. B.↗