Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Comparison of AIS Versus TMS Data Collected over the Virginia Piedmont

The Airborne Imaging Spectrometer (AIS, NS001 Thematic Mapper Simlulator (TMS), and Zeiss camera collected remotely sensed data simultaneously on October 27, 1983, at an altitude of 6860 meters (22,500 feet). AIS data were collected in 32 channels covering 1200 to 1500 nm. A simple atmospheric correction was applied to the AIS data, after which spectra for four cover types were plotted. Spectra for these ground cover classes showed a telescoping effect for the wavelength endpoints. Principal components were extracted from the shortwave region of the AIS (1200 to 1280 nm), full spectrum AIS (1200 to 1500 nm) and TMS (450 to 12,500 nm) to create three separate three-component color image composites. A comparison of the TMS band 5 (1000 to 1300 nm) to the six principal components from the shortwave AIS region (1200 to 1280 nm) showed improved visual discrimination of ground cover types. Contrast of color image composites created from principal components showed the AIS composites to exhibit a clearer demarcation between certain ground cover types but subtle differences within other regions of the imagery were not as readily seen.

Bell, R.↗
NASA NTRS1985

Some comparison of ECMWF 3b and GFDL 3b analyses in the tropics

Owing to the problems that data assimilation procedures have in analyzing data in the tropics and to the apparent differences in the descriptions of the European Center for Medium Range Weather Forecasts (ECMWF) and Geophysical Fluid Dynamics Laboratory (GFDL) assimilation suites, a brief comparison was done of the resulting analyses in the tropics. Three cases each were selected for Standard Operating Procedures 1 and 2 at the 200 and 850 mb levels, the wind fields for 25 deg N 25 deg S were partitioned into a rotational and divergent component, and various statistics of each were calculated.

Julian, P. R.↗
NASA NTRS1985

A comparison study of spectral energetics analysis using varius FGGE 3b data

The atmospheric spectral energetics studies performed before the First GARP Global Experiment (FGGE) were reviewed, and the deficiencies of these studies were pointed out. The data generated by the FGGE IIIb analyses of the European Center for Medium Range Weather Forecasts, the Geophysical Fluid Dynamics Laboratory, and the Goddard Laboratory for Atmospheric Sciences over the entire globe during the FGGE summer and winter are used to analyze the atmospheric spectral energetics. Comparisons were made between the results using three FGGE IIIb analyses, and between previous and current studies with the spectral energetics of the Southern Hemisphere.

Chen, T. C.↗
NASA NTRS1985

Gravity wave spectra observed by Doppler radar: Comparison of a model with mesospheric observations

It was proposed that mesoscale fluctuations of wind and temperature in the free atmosphere are due to gravity waves. Critical tests of this hypothesis must involve the comparison of models based on the theory of buoyancy waves with suitable measurements. The MST (mesosphere-stratosphere-troposphere) radar technique is particularly attractive for this purpose, because it can measure several independent power spectra simultaneously. Observed spectra are derived from mesospheric data taken by the Poker Flat MST radar during June 1983. The spectra were compared with the model spectra for three days when suitable data were available. It was concluded that the mesoscale fluctuations were dominated by gravity waves, and the contribution of two-dimensional turbulence was small.

Vanzandt, T. E.↗
NASA NTRS1985

SSME fuel preburner phase 1/phase 2+ comparison

An analytical comparison of the predicted combustion flowfields for the Phase 1 and Phase 2+ fuel preburner configurations using an advanced CFD combustion code is currently underway at Rocketdyne. The Phase 2+ injector has a modified element design. The redesigned element provides for improved atomization through a shift in the injector element/face bleed flow split while maintaining an acceptable pressure drop. Cold-flow tests of the new design have been encouraging. As a complement to those tests, the Advanced Rocket Injector Combustor Code (ARICC) was selected to conduct a detailed combustion flowfield simulation. ARICC models two-dimensional (or axisymmetric), transient, turbulent, two-phase mixing and combustion flowfields. It is derived from a member of the Los Alamos ICEd-ALE family of codes. Unique features of ARICC include explicit representation of the coaxial LOX jet and hydrogen gas flows, distributed atomization processes, droplet breakup, and supercritical vaporation processes. Predictions of temperature and OH concentration profiles for the Phase 1 and Phase 2+ injector flowfields indicate a trend toward more uniform temperature distributions and shorter flame lengths with the Phase 2+ design.

Jensen, R. J.↗
NASA NTRS1984

A comparison of computer-generated lift and drag polars for a Wortmann airfoil to flight and wind tunnel results

Computations of drag polars for a low-speed Wortmann sailplane airfoil are compared to both wind tunnel and flight results. Excellent correlation is shown to exist between computations and flight results except when separated flow regimes were encountered. Wind tunnel transition locations are shown to agree with computed predictions. Smoothness of the input coordinates to the PROFILE airfoil analysis computer program was found to be essential to obtain accurate comparisons of drag polars or transition location to either the flight or wind tunnel results.

Bowers, A. H.↗
NASA NTRS1986

Comparison of analytical and experimental performance of a wind-tunnel diffuser section

Wind tunnel diffuser performance is evaluated by comparing experimental data with analytical results predicted by an one-dimensional integration procedure with skin friction coefficient, a two-dimensional interactive boundary layer procedure for analyzing conical diffusers, and a two-dimensional, integral, compressible laminar and turbulent boundary layer code. Pressure, temperature, and velocity data for a 3.25 deg equivalent cone half-angle diffuser (37.3 in., 94.742 cm outlet diameter) was obtained from the one-tenth scale Altitude Wind Tunnel modeling program at the NASA Lewis Research Center. The comparison is performed at Mach numbers of 0.162 (Re = 3.097x19(6)), 0.326 (Re = 6.2737x19(6)), and 0.363 (Re = 7.0129x10(6)). The Reynolds numbers are all based on an inlet diffuser diameter of 32.4 in., 82.296 cm, and reasonable quantitative agreement was obtained between the experimental data and computational codes.

Shyne, R. J.↗
NASA NTRS1986

A comparison of experimental and theoretical results for leakage, pressure gradients, and rotordynamic coefficients for tapered annular gas seal

A brief review of current annular seal theory and a discussion of the predicted effect on stiffness of tapering the seal stator are presented. An outline of Nelson's analytical-computational method for determining rotordynamic coefficients for annular compressible-flow seals is included. Modifications to increase the maximum rotor speed of an existing air-seal test apparatus at Texas A&M University are described. Experimental results, including leakage, entrance-loss coefficients, pressure distributions, and normalized rotordynamic coefficients, are presented for four convergent-tapered, smooth-rotor, smooth-stator seals. A comparison of the test results shows that an inlet-to-exit clearance ratio of 1.5 to 2.0 provides the maximum direct stiffness, a clearance ratio of 2.5 provides the greatest stability, and a clearance ratio of 1.0 provides the least stability. The experimental results are compared to theoretical results from Nelson's analysis with good agreement. Test results for cross-coupled stiffness show less sensitivity of fluid prerotation than predicted.

Elrod, D. A.↗
NASA NTRS1985

A comparison of two- and three-dimensional tracer transport within a stratospheric circulation model

Use of the residual circulation for stratospheric tracer transport has been compared to a fully three-dimensional calculation. The wind fields used in this study were obtained from a global, semispectral, primitive equation model, extending from 10 to 100 km in altitude. Comparisons were done with a passive tracer and an ozone-like substance over a two-month period corresponding to a Northern Hemisphere winter. It was found that the use of the residual circulation can lead to errors in the tracer concentrations of about a factor of 2. The error is made up of two components. One is fluctuating with a period of approximately one month and reflects directly the wave transience that occurs on that time-scale. The second part is increasing steadily over the integration period and results from an overestimate of the vertical transport by the residual circulation. Furthermore, the equatorward and upward mixing that occurs with transport by the three-dimensional circulation at low latitudes is not well reproduced when the residual circulation is used.

Schneider, H.-R.↗
NASA NTRS1985

Comparison of theory with experiment in convectionless growth of crystals from solution

Wilcox's computer program for predicting the growth rates of crystals in convectionless supersaturated solution is used to model experiments to measure the crystal growth experiments of Simon (1978) and of Nerad and Shlichta (1984), and the results are compared with the experimental data. The predictions of Wilcox's model are found to be in remarkably good agreement with the results of Simon. The data of Nerad and Shlichta are 30 to 90 percent higher than the predictions of the Wilcox model for a certain range of temperature dependence, consistent with the observation of occasional low-level convection in these experiments. These comparisons indicate that the Wilcox model can be used to make reliable order-of-magnitude predictions of growth rates in the absence of convection.

Schlom, D. G.↗
NASA NTRS1985

Comparison of the contact stress and friction behavior of SiC and ZrO2 materials

Studies were performed to further elucidate the friction and contact-stress characteristics of structural ceramic materials. New data for fully stabilized and partially stabilized zirconia ceramics are compared with prior test results for sintered SiC. The comparison provides further evidence that the high temperature friction characteristics of sintered SiC are strongly influenced by the presence of a viscous surface layer. The results also show that a ceramic material with lower coefficient of friction and higher fracture toughness has increased resistance to strength-reducing surface damage due to contact stress.

Lindberg, L. J.↗
NASA NTRS1986

Comparison of computations and experimental data for leading edge vortices - Effects of yaw and vortex flaps

Computations are presented using the conical Euler equations for swept delta wings with leading edge vortices. All the wings have sharp leading edges swept at 75 degrees to the freestream. In addition to an idealized flat plate model, geometrical features also included are thickness, centerbody, and two vortex flaps. Freestream Mach numbers of 1.7 to 2.8, angles of attack of 10 and 12 degrees, and angles of yaw of 0 and 8 degrees are considered. The computations are compared with pitot pressure traverses for one case. Other calculations are compared with pitot pressure traverses for one case. Other calculations are compared with surface pressure data and vapor screen pictures recently obtained at NASA Langley Research Center. The comparisons indicate that the dominant features of these flows are adequately modeled by the Euler equations, but viscous models are needed for the surface boundary layer and secondary separations.

Murman, E. M.↗
NASA NTRS1985

Information theoretic comparisons of original and transformed data from Landsat MSS and TM

The dispersion and concentration of signal values in transformed data from the Landsat-4 MSS and TM instruments are analyzed using a communications theory approach. The definition of entropy of Shannon was used to quantify information, and the concept of mutual information was employed to develop a measure of information contained in several subsets of variables. Several comparisons of information content are made on the basis of the information content measure, including: system design capacities; data volume occupied by agricultural data; and the information content of original bands and Tasseled Cap variables. A method for analyzing noise effects in MSS and TM data is proposed.

Malila, W. A.↗
NASA NTRS1985

Test results of a 40 kW Stirling engine and comparison with the NASA-Lewis computer code predictions

A Stirling engine was tested without auxiliaries at NASA-Lewis. Three different regenerator configurations were tested with hydrogen. The test objectives were (1) to obtain steady-state and dynamic engine data, including indicated power, for validation of an existing computer model for this engine; and (2) to evaluate structurally the use of silicon carbide regenerators. This paper presents comparisons of the measured brake performance, indicated mean effective pressure, and cyclic pressure variations with those predicted by the code. The measured data tended to be lower than the computer code predictions. The silicon carbide foam regenerators appear to be structurally suitable, but the foam matrix tested severely reduced performance.

Allen, D.↗
NASA NTRS1986

The Cygnus loop - A detailed comparison of X-ray and optical emission

A comparison at a resolution of 17 arcsec is presented between optical emission from forbidden O III and forbidden S II and the thermal X-ray emission for a field on the southeast edge of the Cygnus Loop SNR. The relationship between optical and X-ray emission in the field is described, generalizing to the Loop as a whole when possible. Several possible explanations for the presence of bright X-ray emission in the vicinity of optical emission are presented and evaluated based on the data. These mechanisms involve evaporation, gradual variations and gradients in the density of the preshock intercloud medium, and additional compression of material which has already been heated to X-ray temperatures by the adiabatic blast wave. The additional compression could result from rapid deceleration of the blast wave itself or from reshocking by reflected or bow shocks around dense clouds. Implications of the observations for models of SNR evolution and the interstellar medium are discussed.

Cox, D. P.↗
NASA NTRS1984

Comparison of voice types for helicopter voice warning systems

Three related studies were conducted to compare different types of human voice warnings. In the first study, a comparison of three LPC-encoded voices, human female, human male, and phoneme-synthesized, by the criteria of pilot flight task performance showed no differences due to the voice type. In the second study, pilots' preferences were investigated, by comparing preference for direct synthesized speech to the LPC-encoded human female speech and to LPC-encoded synthesized speech. Most pilots were found to prefer direct synthesized speech over both LPC-encoded human female speech and the LPC-encoded synthesized speech. In the third study, phonetically balanced (PB) words heard in simulated helicopter noise were used to compare the intelligibility of direct synthesized and LPC-encoded phoneme-synthesized speech types. PB word intelligibility was found to be better for direct synthesized speech than for the LPC-encodes synthesized speech.

Simpson, C. A.↗
NASA NTRS1986

Comparison of computations and experimental data for leading edge vortices - Effects of yaw and vortex flaps

Computations are presented using the conical Euler equations for swept delta wings with leading edge vortices. All the wings have sharp leading edges swept at 75 degrees to the freestream. In addition to an idealized flat plate model, geometrical features also included are thickness, centerbody, and two vortex flaps. Freestream Mach numbers of 1.7 to 2.8, angles of attack of 10 and 12 degrees, and angles of yaw of 0 and 8 degrees are considered. The computations are compared with pitot pressure traverses for one case. Other calculations are compared with surface pressure data and vapor screen pictures recently obtained at NASA Langley Research Center. The comparisons indicate that the dominant features of these flows are adequately modeled by the Euler equations, but viscous models are needed for the surface boundary layer and secondary separations.

Murman, E. M.↗
NASA NTRS1986

Comparison of knobs on Mars to isolated hills in eolian, fluvial and glacial environments

The isolated knobs of Mars, characterized in terms of length, width, geographic location, proximity to streaks, and geologic surroundings through Viking Orbiters' photomosaics, are compared to isolated hills on earth eroded by eolian, fluvia, and glacial processes. Comparison of length-to-width ratios indicates similarity of the knobs to the hills formed in a hyperarid environment. The hills formed on earth by fluvial and glacial processes have length-to-width ratios significantly higher than those of the Martian knobs and have other diagnostic features not associated with the knobs. Moreover, streaks, splotches, dunes, and pitted and fluted rocks, all indicative of an eolian regime, are associated with the Martian knobs.

Manent, L. S.↗