Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Clay”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Geochemical and Mineralogical Analyses of Palagonitic Tuffs and Altered Rinds of Pillow Lavas on Iceland and Applications to Mars

Samples of altered pillow lavas and hyalotuffs were collected from a volcanic Tuya and hyaloclastite ridge in western Iceland. Altered basaltic material from regions such as Hloudufell Tuya and Thorolfsfell Ridge may be similar to the surface fines on Mars, which are thought to contain altered basaltic components as well. Geochemical and mineralogical analyses have been performed on the Icelandic samples in order to characterize the properties that distinguish palagonitization from other forms of low temperature alteration in this environment. Major elements were measured using an electron microprobe and mineralogy was determined through X-ray diffraction and visible- infrared reflectance spectroscopy. The primary focus in this study was on the less than 2 microns size fractions of the Hloudufell altered pillow and Thorolfsfell palagonitic tuff samples. The palagonitic tuff contained more crystalline clay minerals and has a higher Al/Fe ratio. The altered pillow lava contained higher abundances of nanophase iron oxides/oxyhydroxides. The extended visible region spectra of the less than 2 microns fractions of both Icelandic samples are similar to bright Martian soils measured by Pathfinder.

Bishop, Janice↗

Mars Eolian Geology at Airphoto Scales: The Large Wind Streaks of Western Arabia Terra

More than 27,000 pictures at aerial photograph scales (1.5-12 m/pixel) have been acquired by the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) since September 1997. The pictures are valuable for testing hypotheses about geologic history and processes of Mars. Of particular interest are eolian features connected to surface albedo patterns. This work is focused on low-albedo wind streaks, some over 100 km long, in western Arabia Terra. Each streak is widest where it originates at an impact crater (typically 25-150 km diameter). The streaks taper downwind. Within the associated craters there is a lower-albedo surface that, in nearly all observed cases, includes barchan dunes indicative of transport in the same direction as the wind streaks. Upwind of the dunes there is usually an outcrop of layered material that might have served as a source for dune sand. MOC images show that the west Arabia streaks consist of a smooth-surfaced, multiple-meters-thick, mantle (smooth at 1.5 m/pixel) that appears to be superposed on local surfaces. No dunes are present, indicating that down-streak transport of sediment via saltation and traction have not occurred. Two models might explain the observed properties: (1) the streaks consist of dark silt- and clay-sized grains deflated from the adjacent crater interiors and deposited from suspension or (2) they are remnants (protected in the lee of impact crater rims) of a formerly much larger, regional covering of low albedo, smooth-surfaced mantle. The latter hypothesis is based on observation of low albedo mantled surfaces occurring south of west Arabia in Terra Meridiani. For reasons yet unknown, a large fraction of the martian equatorial regions are covered by low albedo, mesa-forming material that lies unconformably atop eroded layered and cratered terrain. Both hypotheses are being explored via continued selective targeting of new MOC images as well as analyses of the new data.

Edgett, Kenneth S.↗

Abiotic Versus Biotic Weathering Of Olivine As Possible Biosignatures

We are investigating the weathering of silicate minerals by both purely inorganic, and biologically mediated processes using field-emission scanning electron microscopy (FESEM) and energy dispersive x-ray spectroscopy (EDS). By resolving surface textures and chemical compositions of weathered surfaces at the sub-micron scale we hope to be able to distinguish abiotic from biotic weathering processes and so establish a new biosignature applicable to the study of astromaterials including but not limited to the Martian meteorites. Sterilized olivine grains (San Carlos, Arizona) no more than 1-2 mm in their longest dimension were optically assayed to be uniform in color and free of inclusions were selected as weathering subjects. Prior to all experiments surface morphologies and Fe/Mg ratios were determined for each grain using FE-SEM and EDS. Experiments were divided into two categories abiotic and biotic and were compared with "naturally" weathered samples. For the preliminary experiments, two trials (open and closed to the ambient laboratory environment) were performed under abiotic conditions, and three trials under biotic conditions (control, day 1 and day 2). The open system abiotic trials used sterile grains heated at 98 C and 200 C for both 24 and 48 hours in 1L double distilled de-ionized water. The closed system abiotic trials were conducted under the same conditions but in a sealed two layer steel/Teflon "bomb" apparatus. The biotic trials used sterile grains mounted in a flow-through device attached to a wellhead on the Columbia River aquifer. Several discolored, altered, grains were selected to document "natural" weathering surface textures for comparison with the experimental samples. Preliminary results indicate there are qualitative differences in weathered surface textures among all the designed experiments. The olivine grains in abiotic trials displayed etching, pitting, denticulate margins, dissolution and clay formation. The scale of the features ranged from tens to a few microns with textures that remained relatively sharp and were crystallographically controlled. These results were comparable to that observed in the "naturally" weathered comparison/reference grains. Chemical analysis by EDS indicates these textures correlated with the relative loss of Mg and Fe cations by diffusional processes. In contrast the biotic results indicated changes in the etching patterns on the scale of hundreds of nm, which are neither sharp nor crystallographically controlled (nanoetching). Organisms, organic debris and/or extracellular polymeric substances (biofilm) were often in close proximity or direct contact with the nanoetching. While there are many poorly constrained variables in natural weathering experiments to contend with, such as the time scale, the chemistry of the fluids and degree of biologic participation, some preliminary observations can be made: (1) certain distinct surface textures appear correlated with the specific processes giving rise to these textures; (2) the process of diffusing cations can produce many similar styles of surface textural changes; and (3) the main difference between abiotic and biotically produced weathering is the scale (microns versus nanometers) and the style (crystallographically versus noncrystallographically controlled) of the textural features. Further investigation into nanosize scale surface textures should attempt to quantify both textures and chemical changes of the role of microorganisms in the weathering of silicates. Additional experiments addressing nanoscale textures of shock features for comparison with the current data set.

Longazo, Teresa G.↗

The Mineralogy of Martian Dust: Design and Analysis Considerations for an X-Ray Diffraction/X-Ray Fluorescence (XRD/XRF) Instrument for Exobiological Studies

A principal objective of Mars exploration is the search for evidence of past life which may have existed during an earlier clement period of Mars history. We would like to investigate the history of surface water activity (which is a requirement for all known forms of life) by identifying and documenting the distribution of minerals which require water for their formation or distribution. A knowledge of the mineralogy of the present Martian surface would help to identify areas which, due to the early activity of water, might have harbored ancient life. It would be desirable to establish the presence and characterize the distribution of hydrated minerals such as clays, and of minerals which are primarily of sedimentary origin such as carbonates, silica and evaporites. Mineralogy, which is more critical to exobiological exploration than is simple chemical analysis (absent the detection of organics), will remain unknown or will at best be imprecisely constrained unless a technique sensitive to mineral structure such as powder X-ray diffraction (XRD) is employed. Additional information is contained in the original extended abstract.

Blake, David↗

Mapping Acid Sulfate Alteration of Basaltic Andesite with Thermal Infrared Data

Airborne thermal infrared multi- and hyperspectral data sets are used to map sulfate alteration of basaltic andesites near Reno, NV. Alteration includes quartz-alunite, jarosite and a number of clay minerals such as kaolinite and montmorillonite. Additional information is contained in the original extended abstract.

Vaughan, R. G.↗

Seeking and Identifying Phyllosilicates on Mars - A Simulation Study

In a simulation of seeking phyllosilicates on Mars, terrestrial ocean sediments were found to provide high quality Raman spectra of clays with low interfering fluorescence because most organic residues had been converted to graphitic carbon. Additional information is contained in the original extended abstract.

Wang, A.↗

Investigating the Phyllosilicate Mineralogy of Low Albedo Asteroids

Methodology and calibrations are being developed to identify specific clay mineral species in the CCD spectra of dark asteroids. This will constrain the geologic processes within their parent bodies and the production or alteration of organic molecules within such asteroids. Additional information is contained in the original extended abstract.

Donovan, C.↗

Educational Brief: Using Space for a Better Foundation on Earth Mechanics of Granular Materials

Soils are three-phase composite materials that consist of soil, solid particles, and voids filled with water and/or air. Based on the particle-size distribution, they are generally classified as fine-grained (clays and plastic silts) and coarse-grained soils (nonplastic silts, sand, and gravel). Soil's resistance to external loadings is mainly derived from friction between particles and cohesion. Friction resistance is due to particles' surface-to-surface friction, interlocking, crushing, rearrangement, and dilation (or expansion) during shearing. Cohesion can be due to chemical cementation between particles, electrostatic and electromagnetic forces, and soil-water reaction and equilibrium. The basic factor responsible for the strength of coarse-grained soils is friction. Cohesion can be ignored. This educational brief focuses on measuring shear strength of sands (typical example of coarse-grained soils) where, for the same material, packing density is a main factor to be considered when one asks about the shear strength value. As the external load is applied, the soil's resistance is attained through shearing resistance, which causes the soil volume to increase (expand) or decrease (compress) depending on the initial packing density.

Dooling, Dave↗

Radiation Sensor

Claypack is a cost-effective portable system developed by Barringer Research Ltd. for rapid on-site analysis of clay minerals. It is an adaptation of a hand-held rationing radiometer. By measuring the intensity of reflected radiation, the device discriminates among different minerals present in a sample. It simultaneously analyzes radiation intensities in two separate bands of the spectrum, and calculates the ratio of one to the other. The "reflectance ratio" is computer processed and displayed in digital form.

Source record↗

Analysis of the Barrier Properties of Polyimide-Silicate Nanocomposites

Montmorillonite clay was organically modified and dispersed into a thermoplastic (BPADA-BAPP) and a thermosetting (PMR-15) polyimide matrix. The barrier properties of the neat resins and the nanocomposites were evaluated. Reductions in gas permeability and water absorption were observed in thermoplastic polyimide nanocomposites. The thermosetting polyimide showed a reduction in weight loss during isothermal aging at 288 C. Carbon fabric (T650-35, 8 HS, 8 ply) composites were prepared using both the BPADE-BAPP and PMR-15 based nanocomposites. Dispersion of the layered silicate in the BPADA-BAPP matrix reduced helium permeability by up to 70 percent. The PMR-15/ silicate nanocomposite matrix had an increase in thermal oxidative stability of up to 25 percent.

Campbell, Sandi↗

Discovery of coesite and shocked quartz associated with the upper Eocene cpx spherule layer

At least two major impact ejecta layers have been discovered in upper Eocene strata. The upper layer is the North American microtektite layer. lt consists tektite fragments, microtektites, and shocked mineral grains (e.g., quartz and feldspar with multiple sets of PDFs, coesite and reidite (a high-pressure polymorph of zircon)). The slightly older layer contains clinopyroxene-bearing (cpx) spherules and microtektites associated with an Ir anomaly. The North American tektite layer may be derived from the Chesapeake Bay impact structure, and the cpx spherule layer may from the Popigai impact crater. A cpx spherule layer associated with a positive Ir anomaly was recently found at ODP Site 709, western Indian Ocean. A large sample (Hole 709C, core 31, section 4, 145-150 cm), originally used for a study of interstitial water by shipboard scientists, was acquired for the purpose of recovering a large number of spherules for various petrographic and geochemical studies. A split of the sample (50.35 g) was disaggregated and wet-sieved. More than 17,000 cpx spherules and several hundred microtektites (larger than 125 microns) were recovered from the sample. Rare white opaque grains were observed in the 125-250 micron size fraction after removal of the carbonate component using dilute HCI. Seven of the white opaque grains were X-rayed using a Gandolfi camera and six were found to be coesite (probably mixed with lechatelierite). Eighty translucent colorless grains from the 63-125 micron size fraction were studied with a petrographic microscope. Four of the grains exhibit one to two sets of planar deformation features (PDFs). The only other possible known occurrence of shocked minerals associated with the cpx spherule layer is at Massignano, Italy, where pancake-shaped clay spherules (thought to be diagenetically altered cpx spherules are associated with a positive Ir anomaly and Ni- rich spinel crystals. Shocked quartz grains with multiple sets of PDFs also occur at this site. Until now, unmelted impact ejecta have not been found associated with the cpx spherules at any of the other 20 sites around the world and this is the first time that coesite has been found associated with the cpx spherule layer. The discovery of coesite and shocked quartz associated with the cpx spherules at Site 709 in Indian Ocean is further evidence for the impact origin of the cpx spherule layer. We hope that future discovery of other unmelted minerals from this sample may provide materials to establish constraints on the provenance of this late Eocene ejecta.

Liu, S.↗

KT Boundary Impact Debris from DSDP Site 577

The KT boundary at DSDP Site 577 (Shatsky Rise, western North Pacific) is in a calcareous nannofossil ooze. It is bioturbated so Ir and impact debris are smeared across less than 15 cm of core. An absence of sulfides and chalcophile enrichment and the presence of Mn-micronodules indicate that this boundary did not experience anoxic conditions typical of many other calcareous KT sites. Because of its shallow burial (109 m) ejecta is extremely well preserved and has been the subject of numerous studies. Three high-temperature minerals have been identified at this site. Clinopyroxene (cpx), found only at Site 577 may be precursor to diagenetic sanidine in some European sites. Magnesioferrite spinel has the highest Fe2O3/FeO of any locality and can have and trace inclusions of Ni-magnesiowustite, which is known at only one other site (Site 596). Other debris described includes shocked quartz grains less than 200 microns, hollow spherules possibly related to impact melt glasses found near Chicxulub, and irregular Ir-rich particles that may be derived directly from meteoritic materials. The latter may be related to the fossil meteorite found at Site 576, just 500 km to the east. A large-volume (approx. 10 cc) sample was taken to systematically characterize debris. The less than 60 microns fraction of the carbonate-free sediment contained 44 mg of impact debris. 2700 particles less than l00 microns were classified based on color, shape, and morphology. About 55% are generally light colored, composed mostly of clays, and typically lack magnesioferrite spinel. Less than half of these are quite spherical; many have irregular shapes, possibly from fragmentation. Hollow spherules with smooth shiny surfaces are only 2% of the total but many fragments in the 60 - 100 microns fraction suggest that they were more abundant and that some may have been quite large; 800 microns or more. Cpx-bearing spherules, easily identified by green crystals at the surface, constitute only 2.5% of the total. Three cpx spherules are dumbbells. The other 40% of the debris is a complex assemblage of dark-colored particles, most of which have magnesioferrite spinel. We have currently separated these into 6 groups based on color and morphology, but this hardly describes the diversity of this group. They range from smooth and spherical to rough and irregular in shape. Some have a planar cleavage, similar to some broken cosmic spherules. 220 particles were irradiated for trace element analysis, as groups and as individual particles. It appears that every spherule type as at least a few ng/g Ir. Several of the spinel-bearing particles have been identified with high Ir (200-1500 ng/g), Cr (2-5 mg/g), and Ni (2-10 mg/g), consistent with results. It is hoped that some of these will yield potential fragments of the KT bolide. Only five have been sectioned to date and they are characterized by high concentrations of spinel; two contained traces of magnesiowustite. This debris constitutes a complex assemblage of ejecta materials. The light-colored, spinel-free particles likely derive mainly from target materials. A significant fraction of these are probably alteration products of cpx-spherules. The dark-colored debris is more likely to have high siderophile concentrations, and thus a high extraterrestrial component. However, the majority don't. Most of the larger spinel-bearing spherules have modest Ir concentrations (5-30 ng/g).

Kyte, Frank T.↗

Initial Results on the Extraterrestrial Component of New Sediment Cores Containing Deposits of the Eltanin Impact Event

Background: The impact of the Eltanin asteroid into the Bellingshausen Sea (2.15 Ma) is the only known impact in a deep-ocean (approx. 5 km) basin. In 1995, Polarstern expedition ANT XII/4 made the first geological survey of the suspected impact region. Three sediment cores sampled around the San Martin seamounts (approx. 57.5 S, 91 W) contained well-preserved impact deposits. Sediments of Eocene age and younger were ripped up and redeposited by the impact. The depositional sequence produced by the impact has three units: a chaotic assemblage of sediment fragments up to 50 cm, followed by laminated sands deposited as a turbulent flow, and finally silts and clays that accumulated from dispersed sediments in the water column. The meteoritic impact ejecta, which is composed of shock-melted asteroidal materials and unmelted meteorites, settled through the water column and concentrated near the top of the laminated sands.

Kyte, Frank T.↗

Impact Hydrothermal Alteration of Terrestrial Basalts: Explaining the Rock Component of the Martian Soil

The large energy in terrestrial impacts can create hydrothermal systems and consequently produce hydrothermal alteration materials. In this study we consider the chemistry of impact and volcanic hydrothermal alteration under relatively low water/rock ratios in basaltic or a somewhat more evolved protolith. Our work on the Lonar and Mistastin craters suggests that Fe-rich clays, including Fe-rich saponite can be produced. We postulate that similar alteration materials are produced on Mars and could be a component of the martian soil or regolith, contrary to some earlier studies. The martian regolith is a globally homogenized product of various weathering processes. The soil [1] is thought to consist of a rock component, with lesser amounts of mobile elements (Ca, Na, and K) than a presumed protolith, and a salt or mobile element component enriched in sulfur and chlorine [2, 3]. In this study we consider the contributions of impacts and consequent hydrothermal processes to the rock component of the martian soil.

Nelson, M. J.↗

Global Assessment of Volcanic Debris Hazards from Space

Hazard (slope stability) assessment for different sectors of volcano edifices was successfully obtained from volcanoes in North and South America. The assessment entailed Hyperion images to locate portions of the volcano that were hydrothermally altered to clay rich rocks with zones that were also rich in alunite and other minerals. The identified altered rock zones were field checked and sampled. The rock strength of these zones was calculated from the field and laboratory measurements. Volcano modeling utilizing the distinct element method and limit equilibrium technique, with the calculated strength data was used to assess stability and deformation of the edifice. Modeling results give indications of possible failure volumes, velocities and direction. The models show the crucial role hydrothermally weak rock plays in reducing the strength o the volcano edifice and the rapid identification of weak rock through remote sensing techniques. Volcanoes were assessed in the Cascade Range (USA), Mexico, and Chile (ongoing).

Watters, Robert J.↗

MN Carbonates in the Martian Meteorite Nakhla: Possible Evidence of Brine Evaporation

The importance of secondary phases in martian meteorites lies in their potential to provide clues about the martian environments responsible for their formation. During this study, we analyzed a number of carbonate-bearing fracture surfaces from the Nakhla meteorite. Here we describe the physical and chemical properties of several manganese-calcium-rich siderites. Additionally, we describe a potential model for the formation and alteration of these carbonates, and we suggest constraints on the conditions responsible for their precipitation. Nakhla is an olivine-bearing clinopyroxenite with minor amounts of feldspar, FeS, and Fe oxides. Secondary mineral assemblages include vein filling clay with embedded iron oxides, a calcium sulfate, amorphous silica, chlorapatite, halite and carbonates. Bridges and Grady suggested that the carbonates in Nakhla formed from brine evaporation. Isotope studies of the Mn rich siderite are also consistent with formation from hydrothermal fluids with an upper T constraint of ~170 C.

Bailey, J. V.↗

Magnetic Analysis Techniques Applied to Desert Varnish

Desert varnish is a black or reddish coating commonly found on rock samples from arid regions. Typically, the coating is very thin, less than half a millimeter thick. Previous research has shown that the primary components of desert varnish are silicon oxide clay minerals (~60%), manganese and iron oxides (~20-30%), and trace amounts of other compounds [1]. Desert varnish is thought to originate when windborne particles containing iron and manganese oxides are deposited onto rock surfaces where manganese oxidizing bacteria concentrate the manganese and form the varnish [4,5]. If desert varnish is indeed biogenic, then the presence of desert varnish on rock surfaces could serve as a biomarker, indicating the presence of microorganisms. This idea has considerable appeal, especially for Martian exploration [6]. Magnetic analysis techniques have not been extensively applied to desert varnish. The only previous magnetic study reported that based on room temperature demagnetization experiments, there were noticeable differences in magnetic properties between a sample of desert varnish and the substrate sandstone [7]. Based upon the results of the demagnetization experiments, the authors concluded that the primary magnetic component of desert varnish was either magnetite (Fe3O4) or maghemite ( Fe2O3).

Schmidgall, E. R.↗