Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPRESSIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Quasi One-Dimensional Unsteady Modeling of External Compression Supersonic Inlets

The AeroServoElasticity task under the NASA Supersonics Project is developing dynamic models of the propulsion system and the vehicle in order to conduct research for integrated vehicle dynamic performance. As part of this effort, a nonlinear quasi 1-dimensional model of an axisymmetric external compression supersonic inlet is being developed. The model utilizes compressible flow computational fluid dynamics to model the internal inlet segment as well as the external inlet portion between the cowl lip and normal shock, and compressible flow relations with flow propagation delay to model the oblique shocks upstream of the normal shock. The external compression portion between the cowl-lip and the normal shock is also modeled with leaking fluxes crossing the sonic boundary, with a moving CFD domain at the normal shock boundary. This model has been verified in steady state against tunnel inlet test data and it s a first attempt towards developing a more comprehensive model for inlet dynamics.

Kopasakis, George↗

Sequential Principal Component Analysis -An Optimal and Hardware-Implementable Transform for Image Compression

This paper presents the JPL-developed Sequential Principal Component Analysis (SPCA) algorithm for feature extraction / image compression, based on "dominant-term selection" unsupervised learning technique that requires an order-of-magnitude lesser computation and has simpler architecture compared to the state of the art gradient-descent techniques. This algorithm is inherently amenable to a compact, low power and high speed VLSI hardware embodiment. The paper compares the lossless image compression performance of the JPL's SPCA algorithm with the state of the art JPEG2000, widely used due to its simplified hardware implementability. JPEG2000 is not an optimal data compression technique because of its fixed transform characteristics, regardless of its data structure. On the other hand, conventional Principal Component Analysis based transform (PCA-transform) is a data-dependent-structure transform. However, it is not easy to implement the PCA in compact VLSI hardware, due to its highly computational and architectural complexity. In contrast, the JPL's "dominant-term selection" SPCA algorithm allows, for the first time, a compact, low-power hardware implementation of the powerful PCA algorithm. This paper presents a direct comparison of the JPL's SPCA versus JPEG2000, incorporating the Huffman and arithmetic coding for completeness of the data compression operation. The simulation results show that JPL's SPCA algorithm is superior as an optimal data-dependent-transform over the state of the art JPEG2000. When implemented in hardware, this technique is projected to be ideally suited to future NASA missions for autonomous on-board image data processing to improve the bandwidth of communication.

Duong, Tuan A.↗

Onboard Data Compression of Synthetic Aperture Radar Data: Status and Prospects

Synthetic aperture radar (SAR) instruments on spacecraft are capable of producing huge quantities of data. Onboard lossy data compression is commonly used to reduce the burden on the communication link. In this paper an overview is given of various SAR data compression techniques, along with an assessment of how much improvement is possible (and practical) and how to approach the problem of obtaining it. Synthetic aperture radar (SAR) instruments on spacecraft are capable of acquiring huge quantities of data. As a result, the available downlink rate and onboard storage capacity can be limiting factors in mission design for spacecraft with SAR instruments. This is true both for Earth-orbiting missions and missions to more distant targets such as Venus, Titan, and Europa. (Of course for missions beyond Earth orbit downlink rates are much lower and thus potentially much more limiting.) Typically spacecraft with SAR instruments use some form of data compression in order to reduce the storage size and/or downlink rate necessary to accommodate the SAR data. Our aim here is to give an overview of SAR data compression strategies that have been considered, and to assess the prospects for additional improvements.

Klimesh, Matthew A.↗

Fractal Loop Heat Pipe Performance Comparisons of a Soda Lime Glass and Compressed Carbon Foam Wick

This study compares heat flux performance of a Loop Heat Pipe (LHP) wick structure fabricated from compressed carbon foam with that of a wick structure fabricated from sintered soda lime glass. Each wick was used in an LHP containing a fractal based evaporator. The Fractal Loop Heat Pipe (FLHP) was designed and manufactured by Mikros Manufacturing Inc. The compressed carbon foam wick structure was manufactured by ERG Aerospace Inc., and machined to specifications comparable to that of the initial soda lime glass wick structure. Machining of the compressed foam as well as performance testing was conducted at the United States Naval Academy. Performance testing with the sintered soda lime glass wick structures was conducted at NASA Goddard Space Flight Center. Heat input for both wick structures was supplied via cartridge heaters mounted in a copper block. The copper heater block was placed in contact with the FLHP evaporator which had a circular cross-sectional area of 0.88 cm(sup 2). Twice distilled, deionized water was used as the working fluid in both sets of experiments. Thermal performance data was obtained for three different Condenser/Subcooler temperatures under degassed conditions. Both wicks demonstrated comparable heat flux performance with a maximum of 75 W/cm observed for the soda lime glass wick and 70 W /cm(sup 2) for the compressed carbon foam wick.

Myre, David↗

COxSwAIN: Compressive Sensing for Advanced Imaging and Navigation

The COxSwAIN project focuses on building an image and video compression scheme that can be implemented in a small or low-power satellite. To do this, we used Compressive Sensing, where the compression is performed by matrix multiplications on the satellite and reconstructed on the ground. Our paper explains our methodology and demonstrates the results of the scheme, being able to achieve high quality image compression that is robust to noise and corruption.

Kurwitz, Richard↗

A Priori Analysis of a Compressible Flamelet Model using RANS Data for a Dual-Mode Scramjet Combustor

In an effort to make large eddy simulation of hydrocarbon-fueled scramjet combustors more computationally accessible using realistic chemical reaction mechanisms, a compressible flamelet/progress variable (FPV) model was proposed that extends current FPV model formulations to high-speed, compressible flows. Development of this model relied on observations garnered from an a priori analysis of the Reynolds-Averaged Navier-Stokes (RANS) data obtained for the Hypersonic International Flight Research and Experimentation (HI-FiRE) dual-mode scramjet combustor. The RANS data were obtained using a reduced chemical mechanism for the combustion of a JP-7 surrogate and were validated using avail- able experimental data. These RANS data were then post-processed to obtain, in an a priori fashion, the scalar fields corresponding to an FPV-based modeling approach. In the current work, in addition to the proposed compressible flamelet model, a standard incompressible FPV model was also considered. Several candidate progress variables were investigated for their ability to recover static temperature and major and minor product species. The effects of pressure and temperature on the tabulated progress variable source term were characterized, and model coupling terms embedded in the Reynolds- averaged Navier-Stokes equations were studied. Finally, results for the novel compressible flamelet/progress variable model were presented to demonstrate the improvement attained by modeling the effects of pressure and flamelet boundary conditions on the combustion.

Quinlan, Jesse R.↗

The New CCSDS Standard for Low-Complexity Lossless and Near-Lossless Multispectral and Hyperspectral Image Compression

This paper describes the emerging Issue 2 of the CCSDS-123.0-B standard for low-complexity compression of multispectral and hyperspectral imagery, focusing on its new features and capabilities. Most significantly, this new issue incorporates a closed-loop quantization scheme to provide near-lossless compression capability while still supporting lossless compression, and introduces a new entropy coding option that provides better compression of low-entropy data.

Kiely, Aaron B.↗

Progress on the CO2 Removal and Compression System

The Carbon Dioxide Removal and Compression System (CRCS) is designed to perform both the Carbon Dioxide(CO2) removal and compress CO2 for further processing. The CRCS was designed as a lower power requirement option to the one currently being used on the International Space Station (ISS). This paper describes the final design, fabrication, assembly, and testing of the integrated CRCS. Initial results indicated that the spiral heaters used did not yield uniform heating within both the adsorption and compression beds. In addition, the heaters for the compression bed were insufficient and an additional HVAC jacket was employed to provide heat to the bed.

Air Revitalization↗

On the Existence of Fast Modes in Compressible Magnetohydrodynamic Turbulence

We study the existence and properties of fast magnetosonic modes in 3D compressible MHD turbulence by carrying out a number of simulations with compressible and incompressible driving conditions. We use two approaches to determine the presence of fast modes: mode decomposition based on spatial variations only and spatio-temporal 4D fast Fourier transform (4D FFT) analysis of all fluctuations. The latter method enables us to quantify fluctuations that satisfy the dispersion relation of fast modes with finite frequency. Overall, we find that the fraction of fast modes identified via the spatio-temporal 4D FFT approach in total fluctuation power is either tiny with nearly incompressible driving or ∼2% with highly compressible driving. We discuss the implications of our results for understanding the compressible fluctuations in space and astrophysical plasmas.

Zhaoming Gan↗

Compressible Turbulence in the Near-Sun Solar Wind Parker Solar Probe's First Eight Perihelia

Many questions remain about the compressibility of solar wind turbulence with respect to its origins and properties. Low plasma beta (ratio of thermal to magnetic pressure) environments allow for the easier generation of compressible turbulence, enabling study of the relationship between density fluctuations and turbulent Mach number. Utilizing Parker Solar Probe plasma data, we examine the normalized proton density fluctuations as a function of turbulent Mach number M t conditioned on plasma beta and cross helicity. With consideration of statistical error in the parameters computed from in situ data, we find a general result consistent with both linear-wave theory and nearly incompressible turbulence in an inhomogeneous background field. We compare observational results conditioned on plasma beta and cross helicity with 3D magnetohydrodynamic simulations and observe rather significant similarities with respect to how those parameters affect the proportionality between density fluctuations and turbulent Mach number. This study further investigates the complexity of compressible turbulence as viewed by the density scaling relationship and may help better understand the compressible environment of the near-Sun solar wind.

Manuel Enrique Cuesta↗

ITER Central Solenoid Alternate Pre-Compression Structure Concept and Analysis

The ITER Central Solenoid (CS) is comprised of six independent coils held together by a pre-compression support structure. This structure must provide enough preload to maintain sufficient coil-to-coil contact throughout the current pulse. End of burn (EOB) represents one extreme time-point when the currents in the CS3 coils oppose those of CS1 & CS2. The present baseline design uses nine tie plate pairs located on the coil ID and OD to achieve this pre-compression. While this is an efficient structural approach, the outer tie plates limit access to the coil OD and result in very tight tolerances over the 12.75 m tall toroidal field (TF) coil bore. An alternative pre-compression structure has been developed by the US ITER Project Office, which addresses both of these issues using only internal tension members. This allows clear access to the outer CS surface for plumbing and current feeders, and more reasonable OD tolerances. In addition, the Tension Rod pre-compression structure utilizes existing technology (such as hydraulic tensioner or Superbolt{reg_sign}), which streamlines initial preloading and subsequent adjustments. Structural and transient electromagnetic FEA of the tension rod concept demonstrates that the stresses, displacements, and preliminary Eddy current heat loads are within allowable limits. Fabrication estimates demonstrate no additional cost of the tension rods compared to the tie plates.

36 MATERIALS SCIENCE↗

Method of controlling coherent synchroton radiation-driven degradation of beam quality during bunch length compression

A method of avoiding CSR induced beam quality defects in free electron laser operation by a) controlling the rate of compression and b) using a novel means of integrating the compression with the remainder of the transport system: both are accomplished by means of dispersion modulation. A large dispersion is created in the penultimate dipole magnet of the compression region leading to rapid compression; this large dispersion is demagnified and dispersion suppression performed in a final small dipole. As a result, the bunch is short for only a small angular extent of the transport, and the resulting CSR excitation is small.

47 OTHER INSTRUMENTATION↗

Detection of Modified Matrix Encoding Using Machine Learning and Compressed Sensing

In recent years, driven by the development of steganalysis methods, steganographic algorithms have been evolved rapidly with the ultimate goal of an unbreakable embedding procedure, resulting in recent steganographic algorithms with minimum distortions, exemplified by the recent family of Modified Matrix Encoding (MME) algorithms, which has shown to be most difficult to be detected. In this paper we propose a compressed sensing based on approach for intrinsic steganalysis to detect MME stego messages. Compressed sensing is a recently proposed mathematical framework to represent an image (in general, a signal) using a sparse representation relative to an overcomplete dictionary by minimizing the l1-norm of resulting coefficients. Here we first learn a dictionary from a training set so that the performance will be optimized using the KSVD algorithm; since JPEG images are processed by 8x8 blocks, the training examples are 8x8 patches, rather than the entire images and this increases the generalization of compressed sensing. For each 8x8 block, we compute its sparse representation using OMP (orthogonal matching pursuit) algorithm. Using computed sparse representations, we train a support vector machine (SVM) to classify 8x8 blocks into stego and non-stego classes. Then given an input image, we first divide it into 8x8 blocks. For each 8x8 block, we compute its sparse representation and classify it using the trained SVM. After all the 8x8 blocks are classified, the entire image is classified based on the majority rule of 8x8 block classification results. This allows us to achieve a robust decision even when 8x8 blocks can be classified only with relatively low accuracy. We have tested the proposed algorithm on two datasets (Corel-1000 dataset and a remote sensing image dataset) and have achieved 100% accuracy on classifying images, even though the accuracy of classifying 8x8 blocks is only 80.89%. Key Words Compressed Sensing, Sparcity, Data Dictionary, Steganography, steganalysis

Allen, Josef D↗

Memory hierarchy using row-based compression

A system includes a first memory and a device coupleable to the first memory. The device includes a second memory to cache data from the first memory. The second memory includes a plurality of rows, each row including a corresponding set of compressed data blocks of non-uniform sizes and a corresponding set of tag blocks. Each tag block represents a corresponding compressed data block of the row. The device further includes decompression logic to decompress data blocks accessed from the second memory. The device further includes compression logic to compress data blocks to be stored in the second memory.

97 MATHEMATICS AND COMPUTING↗

SLED-II: A New Method of RF Pulse Compression

In the SLED 1 method of RF pulse compression, two high Q resonators store energy from an RF source for a relatively long time interval (typically 3 to 5 J.1sec). Triggered by a reversal in RF phase, this stored energy is then released during a much shorter interval equal to the filling time of the accelerating structure. A peak power gain on the order of three and a compression efficiency on the order of 60% are typically attained. The shape of the output pulse is, however, a sharply decaying expo- nential. In SLED-II the two cavities are replaced by two lengths of resonant line, forming a Resonant Line SLED (RELS) and resulting in a flat output pulse. Therefore, RELS stages can be cascaded to give a greater peak power gain. Using two stages, a peak power gain greater than ten can be achieved with a reasonable compression efficiency. Unlike the BEC,2 the RELS compression fac- tor per stage is not limited to two, albeit at the expense of intrinsic efficiency. Like the BEC, it uses long lines rather than short cavities.

Farkas, Z.↗

Ignition, Flame Progation, and End-Gas Autoignition Studies of Natural Gas/ EGR Blends in a Rapid Compression Machine

The development of high efficiency, spark ignited natural gas engines is currently limited by engine knock at high power density (at high compression ratio and/or elevated boost pressures) and misfire (at lean conditions and/or high exhaust gas recirculation levels). The knock and misfire limits are further confounded by the wide variety in fuel reactivity observed in “pipeline quality” natural gas. In this study, a rapid compression machine (RCM) was used to characterize the effects of variation in natural gas fuel reactivity and exhaust gas recirculation (EGR) on homogeneous ignition delay, flame propagation rate and end-gas autoignition (EGAI) propensity for stoichiometric natural gas/oxidizer/EGR blends. Pipeline quality natural gas with variable reactivity (68 < Methane Number < 95) was simulated using mixtures of methane, ethane, and propane. EGR was simulated with mixtures of Ar, CO2, CO, and NO. EGR substitution rates were varied from 0 to 30 mass percent. Ignition delay period under homogeneous autoignition conditions was measured at compressed pressures of 24.0 to 33.1 bar and compressed temperatures of 667 to 980 K. Flame propagation rate and EGAI propensity was measured at spark-ignition pressures of 29.9 to 32.9 bar and temperatures of 721 to 782 K.

Mohr, Jeffrey↗

Flow Characterization of Compressed Woody Biomass

Global interest for using terrestrial biomass as an energy source has been increasing recently due to potentially significant socio-economic and environmental benefits relative to fossil energy. Thermochemical biomass processes converting biomass to fuels are relatively well developed, e.g. for direct combustion, gasification, and pyrolysis. However, critical problems often arise when attempting to feed biomass into commercial-scale reactors continuously and without interruption. Biomass particles, whether derived from woody or agricultural feedstock, vary greatly in size, shape, density, and moisture content. High cohesiveness, low bulk density, and poor material flow characteristics often prevent continuous feeding due to bridging, rat-hole formation, blockage, and seal failures. Among all different types of feeders utilized to feed biomass into reactors, screw feeding has received significant attention in recent years. Screw feeders are fuel-specific and require careful design to be reliable, efficient, and economical, especially for reactors operating at elevated pressures. In order to mimic the flow properties of compressed biomass inside a compression-screw feeder, rheological properties of three types of compressed lignocellulosic biomass were investigated using a co-rotating twin screw microcompounder. Experiments were conducted to find the impact of moisture content, particle size and type, and screw speed on rheological properties of forest residual particles as well as sawdust. Increasing moisture from 10 to 50% reduced the apparent viscosity of the compressed biomass. Also, higher screw speeds (10 to 90 rpm) led to a lower relative viscosity. At elevated screw speeds, significant temperature differences were measured between the initial and final states, which should be accounted for in equipment design and operation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Predicting uniaxial compressive strength from empirical relationships between ultrasonic p-wave velocities, porosity, and core measurements in a potential geothermal reservoir, Snake River Plain, Idaho

Empirical, core-based, predictive correlations for the calculation of uniaxial compressive strength (UCS) were developed from compressive sonic velocity measurements (55 whole core samples) and porosity, density, and unconfined compressive tests (110 whole core samples). The samples were collected at 55 different depths in a 550 m (1800 ft) interval of core from the MH-2 borehole located in southern Idaho, USA. The western Snake River Plain is a known region of high heat flow and the borehole was drilled into a potential geothermal reservoir characterized by artesian flow of high-temperature (~140°C) fluids from fractured basalt. UCS was measured in unconfined compressive tests, density and porosity were measured using a He-pycnometer, and p-wave velocities were measured in a pressure vessel under variable confining pressures. We use correlations between density and p-wave velocity (R 2 = 0.91), UCS and porosity (R 2 = 0.78), and UCS and p-wave velocity (R 2 = 0.79) in a method to calculate calibrated UCS from wireline logs. Here, the impact of this predictive correlation is that UCS can be calculated from as little as a bulk density log when sonic logs and core are not available, greatly increasing the number of wells in which we can obtain a local UCS estimate.

15 GEOTHERMAL ENERGY↗