Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BODY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Incidence of an electron layer on an electrically insulated body with an unsteady self-consistent positive charge

Dynamics of an electron layer incident on the surface of an electrically insulated conducting body with an unsteady self-consistent positive charge is investigated. At the initial instant, the electron velocity is directed toward the body and the electron layer is not adjacent to the body surface. One-dimensional plane, cylindrical, and spherical electron motions in vacuum and against the background of motionless ions and neutral particles are considered. Exact analytical solutions to the set of nonlinear plasma hydrodynamics equations with absorbing boundary conditions for electrons are obtained. The spatial and time dependences of the electric field, electron density, and electron velocity are found. The time evolution of the surface charge density is determined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On fast solid-body rotation of the solar core and differential (liquid-like) rotation of the solar surface

On the basis of a two-component (two-fluid) hydrodynamic model, it is shown that the probable phenomenon of solar core rotation with a velocity higher than the average velocity of global rotation of the Sun, discovered by the SOHO mission, can be related to fast solid-body rotation of the light hydrogen component of the solar plasma, which is caused by thermonuclear fusion of hydrogen into helium inside the hot dense solar core. Thermonuclear fusion of four protons into a helium nucleus (α-particle) creates a large free specific volume per unit particle due to the large difference between the densities of the solar plasma and nuclear matter. As a result, an efficient volumetric sink of one of the components of the solar substance—hydrogen—forms inside the solar core. Therefore, a steady-state radial proton flux converging to the center should exist inside the Sun, which maintains a constant concentration of hydrogen as it burns out in the solar core. It is demonstrated that such a converging flux of hydrogen plasma with the radial velocity v{sub r}(r) = −βr creates a convective, v{sub r}∂v{sub φ}/∂r, and a local Coriolis, v{sub r}v{sub φ}/r,φ nonlinear hydrodynamic forces in the solar plasma, rotating with the azimuthal velocity v{sub φ}. In the absence of dissipation, these forces should cause an exponential growth of the solid-body rotation velocity of the hydrogen component inside the solar core. However, friction between the hydrogen and helium components of the solar plasma due to Coulomb collisions of protons with α-particles results in a steady-state regime of rotation of the hydrogen component in the solar core with an angular velocity substantially exceeding the global rotational velocity of the Sun. It is suggested that the observed differential (liquid-like) rotation of the visible surface of the Sun (photosphere) with the maximum angular velocity at the equator is caused by sold-body rotation of the solar plasma in the radiation zone and strong turbulence in the tachocline layer, where the turbulent viscosity reaches its maximum value at the equator. There, the tachocline layer exerts the most efficient drag on the less dense outer layers of the solar plasma, which are slowed down due to the interaction with the ambient space plasma (solar wind).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-body unitarity with isobars revisited

The particle exchange model of hadron interactions can be used to describe three-body scattering under the isobar assumption. Here, we start from the 3->3 scattering amplitude for spinless particles, which contains an isobar-spectator scattering amplitude. Using a Bethe-Salpeter Ansatz for the latter, we derive a relativistic three-dimensional scattering equation that manifestly fulfills three-body unitarity and two-body unitarity for the sub-amplitudes. Furthermore, this property holds for energies above breakup and also in the presence of resonances in the sub-amplitudes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Three-body unitarity in the finite volume

We present the physical interpretation of lattice QCD simulations, performed in a small volume, requires an extrapolation to the infinite volume. A method is proposed to perform such an extrapolation for three interacting particles at energies above threshold. For this, a recently formulated relativistic $3\to 3$ amplitude based on the isobar formulation is adapted to the finite volume. The guiding principle is two- and three-body unitarity that imposes the imaginary parts of the amplitude in the infinite volume. In turn, these imaginary parts dictate the leading power-law finite-volume effects. It is demonstrated that finite-volume poles arising from the singular interaction, from the external two-body sub-amplitudes, and from the disconnected topology cancel exactly leaving only the genuine three-body eigenvalues. Lastly, the corresponding quantization condition is derived for the case of three identical scalar-isoscalar particles and its numerical implementation is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

2HOT: an improved parallel hashed oct-tree n-body algorithm for cosmological simulation

We report on improvements made over the past two decades to our adaptive treecode N-body method (HOT). A mathematical and computational approach to the cosmological N-body problem is described, with performance and scalability measured up to 256k (2 18 ) processors. We present error analysis and scientific application results from a series of more than ten 69 billion (4096 3 ) particle cosmological simulations, accounting for 4 × 10 20 floating point operations. These results include the first simulations using the new constraints on the standard model of cosmology from the Planck satellite. Our simulations set a new standard for accuracy and scientific throughput, while meeting or exceeding the computational efficiency of the latest generation of hybrid TreePM N-body methods.

Computer Science↗

2HOT: An Improved Parallel Hashed Oct-Tree N-Body Algorithm for Cosmological Simulation

We report on improvements made over the past two decades to our adaptive treecode N-body method (HOT). A mathematical and computational approach to the cosmological N-body problem is described, with performance and scalability measured up to 256k (2 18 ) processors. We present error analysis and scientific application results from a series of more than ten 69 billion (4096 3 ) particle cosmological simulations, accounting for 4×10 20 floating point operations. These results include the first simulations using the new constraints on the standard model of cosmology from the Planck satellite. Our simulations set a new standard for accuracy and scientific throughput, while meeting or exceeding the computational efficiency of the latest generation of hybrid TreePM N-body methods.

Warren, Michael S.↗

Many-Body Adaptive Configuration Interaction Suite (MACIS) v0.1.0

The Many-Body Adaptive Configuration Interaction Suite (MACIS) is a modern C++ software infrastructure for the development of selected-configuration interaction (sCI) methods for the fermionic many-body problem in quantum chemistry and materials science. MACIS provides a high-performance, parallel implementation of the Adaptive Sampling Configuration Interaction (ASCI) method as related solvers such as self-consistent orbital optimization and the evaluation of excited states and spectral functions. Unlike existing sCI software, MACIS is developed as a modular software infrastructure which allows it to exist both as a standalone sCI solver and as a library to integrate into existing many-body codes. This modularity allows MACIS to be quickly extensible, including its integration with other sCI methods and high-performance solvers.

Williams-Young, David↗

Human Airway Epithelial Cell Responses to Single Walled Carbon Nanotube Exposure: Nanorope-Residual Body Formation

This investigation examines the 'first contact responses' of in vitro human epithelial airway cells exposed to unrefined single walled carbon nanotubes (SWCNTs) [containing metal catalyst, carbon black, amorphous carbon, graphitic shells, and SWCNTs], and refined acid/peroxide cleaned and cut SWCNTs at low and high dose exposures (0.16 ug/L and 1.60 ug/L) for 2, 3 and 3.5 hours. FTIR, X-ray compositional analysis, morphological TEM analysis and UV-Vis were used to physicochemically characterize the SWCNTs in this study. Following SWCNT exposure to human lung NCI-H292 epithelial monolayers, the airway cells were prepared for light microscopy vital staining, or fixed in glutaraldehyde for SEM/TEM imaging to determine SWCNT binding, uptake, intracellular processing and organellar/SWCNT fate within the exposure period. At 2 hr exposures to both unrefined Carbolex, and refined SWCNTs (at both high and low doses), there were no increases in lung cell necrosis compared to controls. However high dose, 3 hr exposures to unrefined Carbolex material produced severe cell damage (apical and basal plasma membrane holes, decreased mitochondria, numerous intracellular vesicles containing nanomaterial and membrane fragments) and increased cell necrosis. The refined SWCNTs exposed for 3 hr at low dose produced no increase in cell death, although high dose exposure produced significant cell death. By TEM, Acid/peroxide cleaned SWCNT 3 hr exposures at high and low doses, revealed SWCNTs attachment to cell surface mucin, and SWCNT uptake into the cells during membrane recycling. Membranes and SWCNTs were seen within cytoplasmic lamellar body-type vesicles, where vesicular contents were bio-degraded, eventually forming long SWCNT-nanoropes, which were subsequently released into the cytoplasm as clusters of attached nanoropes, as the vesicle membranes fragmented. These Nanorope-Residual Bodies did not cause damage to the surrounding organelles or cytoplasm, and seemed very stabile in the cell cytoplasm. To our knowledge this is the first time that human lung cells have been shown to very rapidly bind, incorporate, bio-degrade and re-assemble SWCNTs into nanoropes intracellularly, to form stabile Nanorope Residual bodies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Body-Wave Methods of Distinguishing between Explosions, Collapses, and Earthquakes: Application to Recent Events in North Korea

Examination of regional distance seismic data from historic nuclear test sites has led to a variety of very effective discriminants between explosions, earthquakes, and collapses. We focus on the body–wave methods. We show that ratios between P– and S–wave amplitudes (P/S ratios) above about ~2 Hz very effectively separate the six Democratic People’s Republic of Korea (DPRK) declared nuclear tests between 2006 and 2017 from natural earthquakes in the region. Similarly, P/S ratios separate historic Nevada Test Site (NTS) nuclear explosions from western U.S. earthquakes. We show that combining P/S ratios with ratios of low–frequency to high–frequency S–wave amplitudes can effectively separate postexplosion collapse events, such as the 1982 NTS Atrisco collapse, and the apparent collapse that followed about eight and a half minutes after the 3 September 2017 DPRK explosion. Explosions often produce fewer and smaller aftershocks than comparably sized earthquakes, which has been proposed as a potential discriminant. We apply the body–wave techniques to the recent seismicity following the largest DPRK event, after first using correlation methods to build a more complete catalog of these events. Despite the empirical effectiveness of the regional body–wave discriminants, the physical basis for the generation of explosion S waves, and therefore the predictability of P/S and low/high frequency techniques, as a function of path, frequency, and event properties such as size, depth, and geology, remains incompletely understood. Furthermore, a goal of current research, such as the Source Physics Experiments (SPE), is to improve our physical understanding of the mechanisms of explosion S–wave generation and advance our ability to numerically model and predict them.

58 GEOSCIENCES↗

Residual Stresses in SAVY 4000 and Hagan Container Bodies

Chloride-induced stress corrosion cracking (SCC) has been investigated as a potential failure mechanism for the SAVY 4000 and the Hagan containers used to store plutonium-bearing materials at Los Alamos National Laboratory. This report discusses the regions of the container bodies most susceptible to SCC and the magnitude of the residual stresses in those regions. Boiling MgCl2 testing indicated that for both containers the region near the top weld was most susceptible to SCC. The Hagan showed through wall cracking after 22-24 hours of exposure both parallel (axial stresses) and perpendicular (hoop stresses) to the weld. The SAVY 4000 container showed significant cracking above and below the weld after 47 hours of exposure but there was no visual evidence of a through wall crack and the cracks did not leak water. Two through wall holes formed in the bottom of the SAVY 4000 container after 44-46 hours of exposure. For both containers, average “through wall” residual stresses were determined from hole drilling data 4 mm below the weld. In the Hagan body, average tensile hoop stresses were 194 MPa and average compressive axial stresses were -120 MPa. In the SAVY 4000 body, average compressive hoop stresses were 11 MPa and average tensile axial stresses were 25 MPa. Results suggest that because the Hagan container exhibited through wall cracking in a shorter time in boiling MgCl2 and had the higher average tensile stress, 194 MPa hoop stress, it is more susceptible to SCC than the SAVY 4000 container.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Determining Cs-137 Background Body Burdens for Wild Pigs at Savannah River Site

In Gaines and Novak, an effective method for determining the background 137 Cs body burden for the white-tailed deer population on the SRS was developed, using data collected during public hunts combined with gamma overflight data to determine the areas contaminated by site activities. However, a background 137 Cs body burden for the wild pigs present on the SRS has not been developed to date. In this work, we applied the Gaines and Novak methods to determine the 137 Cs background concentration in wild pigs. The determination of a site-specific home range for wild pigs on SRS with establishing background hunt compartments for calculating the background body burdens of 137 Cs resulted in an upper bound concentration in wild pigs on SRS of 1.97 pCi/g. This value bounds 95% of the possible 137 Cs contamination value for wild pigs from the background compartments with 95% confidence. Therefore, it is recommended that 1.97 pCi/g be used in the SRS Hunter Dose Tracking System as the background 137 Cs concentration for wild pigs on SRS. This concentration should be decay corrected from the year 2014. It is also recommended that this assessment of background concentrations in SRS wild pigs (and whitetailed deer) be performed at least every five years.

59 BASIC BIOLOGICAL SCIENCES↗

2HOT: An improved parallel hashed oct-tree N-body algorithm for cosmological simulation

Here we report on improvements made over the past two decades to our adaptive treecode N-body method (HOT). A mathematical and computational approach to the cosmological N-body problem is described, with performance and scalability measured up to 256k (218) processors. We present error analysis and scientific application results from a series of more than ten 69 billion (40963) particle cosmological simulations, accounting for 4×1020 floating point operations. These results include the first simulations using the new constraints on the standard model of cosmology from the Planck satellite. Our simulations set a new standard for accuracy and scientific throughput, while meeting or exceeding the computational efficiency of the latest generation of hybrid TreePM N-body methods.

97 MATHEMATICS AND COMPUTING↗

Effects of Perfluorinated Alkyl Substances (PFAS) on Amphibian Body and Liver Conditions: Is Lipid Metabolism Being Perturbed throughout Metamorphosis?

Per- and polyfluoroalkyl substances (PFAS) may interact with peroxisome proliferator activated receptors (PPARs) and alter lipid homeostasis. Using Xenopus laevis, we investigated the effect of PFAS on (a) lipid homeostasis and whether this correlated to changes in body and hepatic condition; (b) the expression of hepatic genes regulated by PPAR; and (c) the hepatic lipidome. We chronically exposed tadpoles to 0.5 µg/L of either PFOS, PFHxS, PFOA, PFHxA, a binary mixture of PFOS and PFHxS (0.5 µg/L of each), or a control, from NF stage 52 through metamorphic climax. Growth, development, and survival were not affected, but we detected a sex-specific decrease in body condition at NF 66 (6.8%) and in hepatic condition (16.6%) across metamorphic climax for male tadpoles exposed to PFOS. We observed weak evidence for the transient downregulation of apolipoprotein-V (apoa5) at NF 62 in tadpoles exposed to PFHxA. Acyl-CoA oxidase 1 (acox1) was downregulated only in males exposed to PFHxS (Ln(Fold Change) = −0.54). We detected PFAS-specific downregulation of structural glycerophospholipids, while semi-quantitative profiling detected the upregulation in numerous glycerophospholipids, sphingomyelins, and diglycerides. Overall, our findings indicate that PFAS can induce sex-specific effects that change across larval development and metamorphosis. We demonstrate that PFAS alter lipid metabolism at environmentally relevant concentrations through divergent mechanisms that may not be related to PPARs, with an absence of effects on body condition, demonstrating the need for more molecular studies to elucidate mechanisms of PFAS-induced lipid dysregulation in amphibians and in other taxa.

Bushong, Anna (ORCID:0000000249630578)↗

Model-Independent Searches for New Physics in Multi-Body Invariant Masses

Model-independent searches for physics beyond the Standard Model typically focus on invariant masses of two objects (jets, leptons or photons). In this study, we explore opportunities for similar model-agnostic searches in multi-body invariant masses. In particular, we focus on the situations in which new physics can be observed in a model-independent way in three and four-body invariant masses of jets and leptons. Such searches may have good prospects in finding new physics in the situations when two-body invariant masses, which have been extensively explored at collider experiments in the past, cannot provide sufficient signatures for experimental observations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Search for Additional Bodies in the GJ 1132 Planetary System from 21 Ground-based Transits and a 100-hr Spitzer Campaign

We present the results of a search for additional bodies in the GJ 1132 system through two methods: photometric transits and transit timing variations of GJ 1132b. We collected 21 transit observations of GJ 1132b with the MEarth-South array. We obtained 100 near-continuous hours of observations with the Spitzer Space Telescope, including two transits of GJ 1132b and spanning 60% of the orbital phase of the maximum (6.9-day) period at which bodies coplanar with GJ 1132b would transit. We exclude transits of additional Mars-sized bodies, such as a second planet or a moon, with a confidence of 99.7%. We find that the planet-to-star radius ratio inferred from the MEarth and Spitzer light curves are discrepant at the 3.7σ level, which we ascribe to the effects of starspots and faculae. When we combine the mass estimate of the star (obtained from its parallax and apparent K {sub s} band magnitude) with the stellar density inferred from our high-cadence Spitzer light curve (assuming zero eccentricity), we measure the stellar radius of GJ 1132 to be 0.2105{sub −0.0085}{sup +0.0102} R{sub ⊙}, and we refine the radius measurement of GJ 1132b to 1.130±0.056 R{sub ⊕}. Combined with HARPS RV measurements, we determine the density of GJ 1132b to be 6.2 ± 2.0 g cm{sup −3}. We refine the ephemeris of the system (improving the period determination by an order of magnitude) and find no evidence for transit timing variations, which would be expected if there was a second planet near an orbital resonance with GJ 1132b.

79 ASTRONOMY AND ASTROPHYSICS↗

Precise and Fast Computation of the Gravitational Field of a General Finite Body and Its Application to the Gravitational Study of Asteroid Eros

In order to obtain the gravitational field of a general finite body inside its Brillouin sphere, we developed a new method to compute the field accurately. First, the body is assumed to consist of some layers in a certain spherical polar coordinate system and the volume mass density of each layer is expanded as a Maclaurin series of the radial coordinate. Second, the line integral with respect to the radial coordinate is analytically evaluated in a closed form. Third, the resulting surface integrals are numerically integrated by the split quadrature method using the double exponential rule. Finally, the associated gravitational acceleration vector is obtained by numerically differentiating the numerically integrated potential. Numerical experiments confirmed that the new method is capable of computing the gravitational field independently of the location of the evaluation point, namely whether inside, on the surface of, or outside the body. It can also provide sufficiently precise field values, say of 14–15 digits for the potential and of 9–10 digits for the acceleration. Furthermore, its computational efficiency is better than that of the polyhedron approximation. This is because the computational error of the new method decreases much faster than that of the polyhedron models when the number of required transcendental function calls increases. As an application, we obtained the gravitational field of 433 Eros from its shape model expressed as the 24 × 24 spherical harmonic expansion by assuming homogeneity of the object.

79 ASTRONOMY AND ASTROPHYSICS↗

Possible Presence of a Third Body in the Kepler K2 Variable EPIC 202073314

We report the presence of an unseen third-body companion in a low-mass-ratio deep contact binary system Kepler K2 EPIC 202073314 as seen by the presence of the light time effect (LITE) on the O–C diagram. The system is found to be exhibiting an increasing period trend along with a sinusoidal behavior of the O–C residuals owing to the LITE variations. The residuals are modeled initially assuming a circular orbit to obtain a third-body orbital period of ∼9.75 years. We further performed a rigorous analysis by allowing the eccentricity to vary, which led to a third-body orbital period of ∼8.66 years with e {sub 3} = 0.51. We also report the photometric study of this variable. The system is found to have a mass ratio of ∼0.15 with an inclination of ∼77°. Monte-Carlo simulations were performed to verify the consistency of the obtained photometric solution. The system is considered to be in significant geometrical contact as seen by the high fill-out factor of ∼57%. Magnetic inactivity of the system is understood in terms of the absence of O’ Connell effect and lack of fill-in effect in the Hα spectral line. The dynamical state of the system is discussed in terms of the Hut’s stability criteria (((J{sub spin})/(J{sub orb}))=(1/3)) as the low-mass and high fill-out factor configuration of the system makes it a promising candidate in the context of stellar mergers. Assuming conservative mass transfer, the system is expected to meet the critical mass ratio of ∼0.07–0.09 in ∼10{sup 6} years.

79 ASTRONOMY AND ASTROPHYSICS↗

An Advanced N -body Model for Interacting Multiple Stellar Systems

We construct an advanced model for interacting multiple stellar systems in which we compute all trajectories with a numerical N -body integrator, namely the Bulirsch–Stoer from the SWIFT package. We can then derive various observables: astrometric positions, radial velocities, minima timings (TTVs), eclipse durations, interferometric visibilities, closure phases, synthetic spectra, spectral energy distribution, and even complete light curves. We use a modified version of the Wilson–Devinney code for the latter, in which the instantaneous true phase and inclination of the eclipsing binary are governed by the N -body integration. If all of these types of observations are at one’s disposal, a joint χ {sup 2} metric and an optimization algorithm (a simplex or simulated annealing) allow one to search for a global minimum and construct very robust models of stellar systems. At the same time, our N -body model is free from artifacts that may arise if mutual gravitational interactions among all components are not self-consistently accounted for. Finally, we present a number of examples showing dynamical effects that can be studied with our code and we discuss how systematic errors may affect the results (and how to prevent this from happening).

79 ASTRONOMY AND ASTROPHYSICS↗