SEARCH · Engineering Papers

Results for “Azimuth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Active and passive microwave measurements in Hurricane Allen

The NASA Langley Research Center analysis of the airborne microwave remote sensing measurements of Hurricane Allen obtained on August 5 and 8, 1980 is summarized. The instruments were the C-band stepped frequency microwave radiometer and the Ku-band airborne microwave scatterometer. They were carried aboard a NOAA aircraft making storm penetrations at an altitude of 3000 m and are sensitive to rain rate, surface wind speed, and surface wind vector. The wind speed is calculated from the increase in antenna brightness temperature above the estimated calm sea value. The rain rate is obtained from the difference between antenna temperature increases measured at two frequencies, and wind vector is determined from the sea surface normalized radar cross section measured at several azimuths. Comparison wind data were provided from the inertial navigation systems aboard both the C-130 aircraft at 3000 m and a second NOAA aircraft (a P-3) operating between 500 and 1500 m. Comparison rain rate data were obtained with a rain radar aboard the P-3. Evaluation of the surface winds obtained with the two microwave instruments was limited to comparisons with each other and with the flight level winds. Two important conclusions are drawn from these comparisons: (1) the radiometer is accurate when predicting flight level wind speeds and rain; and (2) the scatterometer produces well behaved and consistent wind vectors for the rain free periods.

Delnore, V. E.↗

NASA NTRS1985

Kyoto Meteor Radar Observation in November, 1981 and May, 1982

The Kyoto meteor radar a pulsed Doppler radar and operates at 31.57 MHz ith peak power of 10 kW. An interferometer is adopted for arrival angle measurement. Height resolution is approximately 1 to 3 km depending on both azimuth and elevation angles. Data is analyzed according to an algorithm approved by GROVES. All data in height range 84 to 104 km are separated into five layers, whose altitude width is 4 km. In each layer, least square fitting is performed for ten parameters, which are amplitudes of northward/eastward mean wind and sin/cos component of diurnal/semidiurnal tide. Reliable range for each parameter is also calculated.

Tsuda, T.↗

NASA NTRS1985

LANDSAT-4 Thematic Mapper Modulation Transfer Function (MTF) evaluation

The Modulation Transfer Function (MTF) for thematic mapping (TM) bands 3, 4, 5 and 7 is reliably estimated with the San Mateo Bridge target in the 12/31/82 scene. These results are to be compared with those from the 8/12/83 scene. Bands 1, 2 and 6 are to be analyzed with a different target possessing greater contrast. This may be possible with the underflight data comparison currently underway. The registration of this data to the TM image of 8/12/83 for a region arround the Stockton sewage pond east of San Francisco has begun. This particular approach has the advantage that the full two-dimensional MFT will be measured instead of the MFT in only one azimuth as reported.

Schowengerdt, R.↗

NASA NTRS1986

A study of 35-ghz radar-assisted orbital maneuvering vehicle/space telescope docking

An experiment was conducted to study the effects of measuring range and range rate information from a complex radar target (a one-third scale model of the Edwin P. Hubble Space Telescope). The radar ranging system was a 35-GHz frequency-modulated continuous wave unit developed in the Communication Systems Branch of the Information and Electronic Systems Laboratory at Marshall Space Flight Cneter. Measurements were made over radar-to-target distances of 5 meters to 15 meters to simulate the close distance realized in the final stages of space vehicle docking. The Space Telescope model target was driven by an antenna positioner through a range of azimuth and elevation (pitch) angles to present a variety of visual aspects of the aft end to the radar. Measurements were obtained with and without a cube corner reflector mounted in the center of the aft end of the model. The results indicate that range and range rate measurements are performed significantly more accurately with the cooperative radar reflector affixed. The results further reveal that range rate (velocity) can be measured accurately enough to support the required soft docking with the Space Telescope.

Mcdonald, M. W.↗

NASA NTRS1985

Quantitative study on dispersion relations of TIDs observed by an HF Doppler array

A quantitative study on the dispersion relation of traveling ionospheric disturbances (TIDs) was performed by using data obtained by an HF Doppler array. Observed data at three stations are digitized continuously with a sampling period of 10 sec. A schematic illustration of a running analysis method is given. Fourier components omega's and their wave vectors k's of the TIDs are calculated from these subset data from three stations by means of the cross-spectrum analysis. Diagrams of horizontal trace velocity V sub ph versus wave period T were also obtained. From these diagrams one can see clear cutoff periods of the internal mode of the atmospheric gravity waves. A morphological classification of the mode of the omega - k and V sub ph - T obtained through one year was performed. The estimation of the horizontal velocity vectors of the thermospheric wind form their dispersion relations was performed also. A key point of the method of obtaining the vectors is to estimate the tilt, in azimuthally different omega - k diagrams, of a resonant branch ascribed to the Brunt oscillations.

Tsutsui, M.↗

NASA NTRS1986

A study of the stress wave factor technique for nondestructive evaluation of composite materials

The acousto-ultrasonic method of nondestructive evaluation is an extremely sensitive means of assessing material response. Efforts continue to complete the understanding of this method. In order to achieve the full sensitivity of the technique, extreme care must be taken in its performance. This report provides an update of the efforts to advance the understanding of this method and to increase its application to the nondestructive evaluation of composite materials. Included are descriptions of a novel optical system that is capable of measuring in-plane and out-of-plane displacements, an IBM PC-based data acquisition system, an extensive data analysis software package, the azimuthal variation of acousto-ultrasonic behavior in graphite/epoxy laminates, and preliminary examination of processing variation in graphite-aluminum tubes.

Sarrafzadeh-Khoee, A.↗

NASA NTRS1986

EISCAT velocity patterns for theoretical plasma convection models

Theoretical line-of-sight velocities, as would be observed by the EISCAT radar, are computed for idealized models of plasma convection in the polar ionosphere. The calculations give the velocity as a function of range and Universal Time. For several variants of the Volland and Heelis convection models, how the maxima, minima and reversals of velocity depend on beam azimuth is examined. The analysis is designed to be applied to data from the UK-POLAR experiment, an example of which is shown.

Rishbeth, H.↗

NASA NTRS1986

Aeroelastic considerations for torsionally soft rotors

A research study was initiated to systematically determine the impact of selected blade tip geometric parameters on conformable rotor performance and loads characteristics. The model articulated rotors included baseline and torsionally soft blades with interchangeable tips. Seven blade tip designs were evaluated on the baseline rotor and six tip designs were tested on the torsionally soft blades. The designs incorporated a systemmatic variation in geometric parameters including sweep, taper, and anhedral. The rotors were evaluated in the NASA Langley Transonic Dynamics Tunnel at several advance ratios, lift and propulsive force values, and tip Mach numbers. A track sensitivity study was also conducted at several advance ratios for both rotors. Based on the test results, tip parameter variations generated significant rotor performance and loads differences for both baseline and torsionally soft blades. Azimuthal variation of elastic twist generated by variations in the tip parameters strongly correlated with rotor performance and loads, but the magnitude of advancing blade elastic twist did not. In addition, fixed system vibratory loads and rotor track for potential conformable rotor candidates appears very sensitive to parametric rotor changes.

Mantay, W. R.↗

NASA NTRS1985

Heavy ion beam-ionosphere interactions - Electron acceleration

Moore et al. (1982) described a number of unexpected effects which were observed during the first Argon Release Controlled Study (ARCS 1, or rocket flight 29:014). The present paper provides a description of detailed analyses of the interaction of the argon beam with the ionosphere. An important feature of the considered test was that all detectors and the Ar(+) gun remained attached to the rocket throughout the flight. It is pointed out that the most dramatic effect of ion gun operation on ARCS 1 involved large changes in the fluxes of electrons with energies below about 600 eV. The observations are discussed, taking into account the distribution functions, azimuth dependence, and electron and ion trajectories. Attention is given to the perpendicular ion beam, the parallel ion beam, the acceleration of downgoing and upgoing electrons, and aspects of wave generation.

Kaufmann, R. L.↗

NASA NTRS1985

Sun-view angle effects on reflectance factors of corn canopies

The effects of sun and view angles on reflectance factors of corn (Zea mays L.) canopies ranging from the six leaf stage to harvest maturity were studied on the Purdue University Agronomy Farm by a multiband radiometer. The two methods of acquiring spectral data, the truck system and the tower systrem, are described. The analysis of the spectral data is presented in three parts: solar angle effects on reflectance factors viewed at nadir; solar angle effects on reflectance factors viewed at a fixed sun angle; and both sun and view angles effect on reflectance factors. The analysis revealed that for nadir-viewed reflectance factors there is a strong solar angle dependence in all spectral bands for canopies with low leaf area index. Reflectance factors observed from the sun angle at different view azimuth angles showed that the position of the sensor relative to the sun is important in determining angular reflectance characteristics. For both sun and view angles, reflectance factors are maximized when the sensor view direction is towards the sun.

Ranson, K. J.↗

NASA NTRS1984

Aeroelastic considerations for torsionally soft rotors

Mantay, W. R.↗

NASA NTRS1985

High-latitude convection on open and closed field lines for large IMF B(y)

S3-3 electric field observations for August 23, 1976, show a single convection cell engulfing the northern polar cap. The flow direction is that for a positive IMF B(y) component. The particle data indicate that nearly half the duskside sunward flow occurs on closed field lines whereas the dawnside flow is entirely on open field lines. This is interpreted in terms of an IMF B(y)-induced deformation in the polar cap boundary, where the deformation moves with the convective flow. Thus, convection streamlines cross the deformed polar cap boundary, but no flow crosses the boundary because it is carried by the flow. Since southern hemisphere convection is expected to occur with the opposite sense of rotation, closed field lines that will be forced to tilt azimuthally are predicted. On the nightside the tilt produces a y component of the magnetic field in the same direction as the IMF for either sign of IMF B(y). This interpretation is consistent with observations of a greater y component in the plasma sheet than the tail lobes, which are difficult to understand in terms of the common explanation of IMF penetration. Alternatives to this interpretation are also discussed.

Moses, J. J.↗

NASA NTRS1985

Passive microwave remote sensing of an anisotropic random-medium layer

The principle of reciprocity is invoked to calculate the brightness temperatures for passive microwave remote sensing of a two-layer anisotropic random medium. The bistatic scattering coefficients are first computed with the Born approximation and then integrated over the upper hemisphere to be subtracted from unity, in order to obtain the emissivity for the random-medium layer. The theoretical results are illustrated by plotting the emissivities as functions of viewing angles and polarizations. They are used to interpret remote sgnsing data obtained from vegetation canopy where the anisotropic random-medium model applies. Field measurements with corn stalks arranged in various configurations with preferred azimuthal directions are successfully interpreted with this model.

Lee, J. K.↗

NASA NTRS1986

Computation of three-dimensional flow about aerobrake configurations

Ellipsoid, cone and cylinder aerobrake configurations are analyzed to provide comparison data between experimental and model predictions. An analytical model was devised to account for the shock layer ahead of the body and in the near-wake region in terms of the Navier-Stokes equations expressed in conformal polar and azimuthal-angle coordinates. Using polar coordinates simplified the equations by mapping the body onto a sphere, a procedure which also reduced the magnitude of the discretization errors. The equations are then solved using an alternating direction implicit (ADI) factorization technique. Computations were carried out for Mach 3-10 at various grid resolutions and compared with available wind tunnel data. The model generated pressure distributions, heat transfer coefficients and velocity profile data that agreed relatively well with experimental data at a reduced computational cost. Further work is necessary to identify the location of shocks and to model flows about asymmetric configurations.

Li, C. P.↗

NASA NTRS1985

Broadening of looplike solar coronal transients

The broadening of the tops of nine outwardly expanding looplike coronal mass-ejection transients observed during 1973-1974 and 1980 has been examined. Five of the nine transients exhibit increased breadth with time (height); although the rates vary widely, no event shows an increase which can be fitted by a power-law form with a greater-than-linear increase with height. The breadth of four events decreases with height. When all nine events are considered together, the transient breadth with height is fitted with an expression h varies as R exp 0.48 with large scatter. In addition, measurements of the total observed loop length of the nine transients show that this length L varies as R exp 1.30. Both of these results are contrary to the predictions of one model of loop expulsion as a result of an assumed azimuthal magnetic field gradient. Finally, when combined with the facts that looplike mass ejections are usually associated with the occurrence of eruptive prominences, and that such mass ejections are generally accelerated through the corona, it is found that the observed variation of transient breadth with height contradicts some characteristics of self-similar fluid flow which have been ascribed to mass-ejection transients.

Macqueen, R. M.↗

NASA NTRS1985

Shepherding model for Neptune's arc ring

A model to explain the confinement of the recently discovered incomplete arc ring around Neptune is developed. The ring may be azimuthally confined near a triangular (Trojan) point of an undiscovered satellite of Neptune. Radial diffusion of the ring particles can be prevented by shepherding torques of another moon. Two satellites with diameters of 100-200 km would be sufficient to confine the ring; such moons would be too small to have been photographed from earth.

Lissauer, J. J.↗

NASA NTRS1984

An experimental investigation of the parallel blade-vortex interaction

A scheme for investigating the parallel blade vortex interaction (BVI) has been designed and tested. The scheme involves setting a vortex generator upstream of a nonlifting rotor so that the vortex interacts with the blade at the forward azimuth. The method has revealed two propagation mechanisms: a type C shock propagation from the leading edge induced by the vortex at high tip speeds, and a rapid but continuous pressure pulse associated with the proximity of the vortex to the leading edge. The latter is thought to be the more important source. The effects of Mach number and vortex proximity are discussed.

Caradonna, F. X.↗

NASA NTRS1985

Digital image transformation and rectification of spacecraft and radar images

The application of digital processing techniques to spacecraft television pictures and radar images is discussed. The use of digital rectification to produce contour maps from spacecraft pictures is described; images with azimuth and elevation angles are converted into point-perspective frame pictures. The digital correction of the slant angle of radar images to ground scale is examined. The development of orthophoto and stereoscopic shaded relief maps from digital terrain and digital image data is analyzed. Digital image transformations and rectifications are utilized on Viking Orbiter and Lander pictures of Mars.

Wu, S. S. C.↗