Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATOMIC MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

IC w22_phadiagractox Highlight: Composition-dependent melting temperature of a compound [Poster]

Figure 1 displays, ambient melting points of the Au-Cu system as a function of Cu atomic percent: present model vs. experimental data from four different sources. Figure 2 displays, ambient melting points of the U-O system as a function of O atomic percent: present model vs. both experiment and quantum molecular dynamics (QMD) simulations on the stoichiometric U-O compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

To B or not to B: a question of resolution?

A simple rule of thumb based on resolution is not adequate to identify the best treatment of atomic displacements in macromolecular structural models. The choice to use isotropic B factors, anisotropic B factors, TLS models or some combination of the three should be validated through statistical analysis of the model refinement. In choosing and refining any crystallographic structural model, there is tension between the desire to extract the most detailed information possible and the necessity to describe no more than what is justified by the observed data. A more complex model is not necessarily a better model. Thus, it is important to validate the choice of parameters as well as validating their refined values. One recurring task is to choose the best model for describing the displacement of each atom about its mean position. At atomic resolution one has the option of devoting six model parameters (a ‘thermal ellipsoid’) to describe the displacement of each atom. At medium resolution one typically devotes at most one model parameter per atom to describe the same thing (a ‘B factor’). At very low resolution one cannot justify the use of even one parameter per atom. Furthermore, this aspect of the structure may be described better by an explicit model of bulk displacements, the most common of which is the translation/libration/screw (TLS) formalism, rather than by assigning some number of parameters to each atom individually. One can sidestep this choice between atomic displacement parameters and TLS descriptions by including both treatments in the same model, but this is not always statistically justifiable. The choice of which treatment is best for a particular structure refinement at a particular resolution can be guided by general considerations of the ratio of model parameters to the number of observations and by specific statistics such as the Hamilton R-factor ratio test.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffraction Studies of the Atomic Vibrations of Bulk and Surface Atoms in the Reciprocal and Real Spaces of Nanocrystalline SiC

To describe and evaluate the vibrational properties of nanoparticles it is necessary to distinguish between the surface and the core of the particles. Theoretical calculations show that vibrational density of states of the inner atoms of nanograins is similar to bulk material but shifted to higher energies which can be explained by the fact that the gain core is stressed (hardened) due to the presence of internal pressure. Theoretical calculations also show that there is a difference between vibrational properties of a crystal lattice of the grain interior in isolated particles and in a dense (sintered) nanocrystalline material. This is probably due to a coupling of the modes inside the grains via the grain boundaries in dense nanocrystalline bodies. We examined strains present in the surface shell based on examination of diamond and Sic nanocrystals in reciprocal (Bragg-type scattering) and real (PDF analysis) space analysis of neutron diffraction data. Recently we examined the atomic thermal motions in nanocrystalline Sic based on the assumption of a simple Einstein model for uncorrelated atomic notions. According to this model, the Bragg intensity is attenuated as a function of scattering angle by the Debye-Waller factor. Based on this assumption overall temperature factors were determined from the Wilson plots.

Stelmakh, S.↗

Polarizabilities and van der Waals C{sub 6} coefficients of fullerenes from an atomistic electrodynamics model: Anomalous scaling with number of carbon atoms

The van der Waals C{sub 6} coefficients of fullerenes are shown to exhibit an anomalous dependence on the number of carbon atoms N such that C{sub 6} ∝ N{sup 2.2} as predicted using state-of-the-art quantum mechanical calculations based on fullerenes with small sizes, and N{sup 2.75} as predicted using a classical-metallic spherical-shell approximation of the fullerenes. We use an atomistic electrodynamics model where each carbon atom is described by a polarizable object to extend the quantum mechanical calculations to larger fullerenes. The parameters of this model are optimized to describe accurately the static and complex polarizabilities of the fullerenes by fitting against accurate ab initio calculations. This model shows that C{sub 6} ∝ N{sup 2.8}, which is supportive of the classical-metallic spherical-shell approximation. Additionally, we show that the anomalous dependence of the polarizability on N is attributed to the electric charge term, while the dipole–dipole term scales almost linearly with the number of carbon atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion-beam-induced atomic mixing

Calculations based on the diffusion model are presented of atomic mixing by ion bombardment. This mixing is assumed to have its basis, as does sputtering, in the collision cascades generated by the primary beam. Sharp interfaces within a target are seen to be smoothed by ion bombardment. Mixing may place fundamental limits on the resolution of ion microprobes.

Haff, P. K.↗

Short- and medium-range order in a Zr[subscript 73]Pt[subscript 27] glass: Experimental and simulation studies

The structure of a Zr{sub 73}Pt{sub 27} metallic glass, which forms a Zr{sub 5}Pt{sub 3} (Mn{sub 5}Si{sub 3}-type) phase having local atomic clusters with distorted icosahedral coordination during the primary crystallization, has been investigated by means of x-ray diffraction and combining ab initio molecular-dynamics (MD) and reverse Monte Carlo (RMC) simulations. The ab initio MD simulation provides an accurate description of short-range structural and chemical ordering in the glass. A three-dimensional atomistic model of 18?000 atoms for the glass structure has been generated by the RMC method utilizing both the structure factor S(k) from x-ray diffraction experiment and the partial pair-correlation functions from ab initio MD simulation. Honeycutt and Andersen index and Voronoi cell analyses, respectively, were used to characterize the short- and medium-range order in the atomistic structure models generated by ab initio MD and RMC simulations. The ab initio results show that an icosahedral type of short-range order is predominant in the glass state. Furthermore, analysis of the atomic model from the constrained RMC simulations reveals that the icosahedral-like clusters are packed in arrangements having higher-order correlations, thus establishing medium-range topological order up to two or three cluster shells.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effects of hydrogen atoms on surface conductivity of diamond film

To investigate the effects of surface chemisorbed hydrogen atoms and hydrogen atoms in the subsurface region of diamond on surface conductivity, models of hydrogen atoms chemisorbed on diamond with (100) orientation and various concentrations of hydrogen atoms in the subsurface layer of the diamond were built. By using the first-principles method based on density functional theory, the equilibrium geometries and densities of states of the models were studied. The results showed that the surface chemisorbed hydrogen alone could not induce high surface conductivity. In addition, isolated hydrogen atoms in the subsurface layer of the diamond prefer to exist at the bond centre site of the C-C bond. However, such a structure would induce deep localized states, which could not improve the surface conductivity. When the hydrogen concentration increases, the C-H-C-H structure and C-3H{sub bc}-C structure in the subsurface region are more stable than other configurations. The former is not beneficial to the increase of the surface conductivity. However, the latter would induce strong surface states near the Fermi level, which would give rise to high surface conductivity. Thus, a high concentration of subsurface hydrogen atoms in diamond would make significant contributions to surface conductivity.

36 MATERIALS SCIENCE↗

Existence of Dust Atoms and Modified OML Theory

Based on adiabatic model and nonlinear screening of the dust grains immersed in electron-ion plasma, an important relation is obtained between the maximum potential (and therefore the charge) of the dust grain and the temperature of the electrons. A Thomas-Fermi equation suggesting the existence of dust atom with a well-defined atomic radius is also derived. Briefly a new approach for obtaining floating potential has been introduced. This novel approach is valid for those cases when the standard OML theory is not applicable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A multiscale approach to model hydrogen bonding: The case of polyamide

We present a simple multiscale model for polymer chains in which it is possible to selectively remove degrees of freedom. The model integrates all-atom and coarse-grained potentials in a simple and systematic way and allows a fast sampling of the complex conformational energy surface typical of polymers whilst maintaining a realistic description of selected atomistic interactions. In particular, we show that it is possible to simultaneously reproduce the structure of highly directional non-bonded interactions such as hydrogen bonds and efficiently explore the large number of conformations accessible to the polymer chain. We apply the method to a melt of polyamide removing from the model only the degrees of freedom associated to the aliphatic segments and keeping at atomistic resolution the amide groups involved in the formation of the hydrogen bonds. The results show that the multiscale model produces structural properties that are comparable with the fully atomistic model despite being five times faster to simulate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LINE-INTERLOCKING EFFECTS ON POLARIZATION IN SPECTRAL LINES BY RAYLEIGH AND RAMAN SCATTERING

The polarized spectrum of the Sun and stars is formed from the scattering of anisotropic radiation on atoms. Interpretation of this spectrum requires the solution of polarized line transfer in multilevel atomic systems. While sophisticated quantum theories of polarized line formation in multilevel atomic systems exist, they are limited by the approximation of complete frequency redistribution in scattering. The partial frequency redistribution (PRD) in line scattering is a necessary component in modeling the polarized spectra of strong lines. The polarized PRD line scattering theories developed so far confine themselves to a two-level or a two-term atom model. In this paper, we present a heuristic approach to the problem of polarized line formation in multilevel atoms taking into account the effects of PRD and a weak magnetic field. Starting from the unpolarized PRD multilevel atom approach of Hubeny et al., we incorporate the polarization state of the radiation field. However, the lower level polarization is neglected. Two iterative methods of solving the polarized PRD line transfer in multilevel atoms are also presented. Taking the example of a five-level Ca II atom model, we present illustrative results for an isothermal one-dimensional model atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Moments of dipole oscillator-strength distribution for the helium sequence

The moments S(mu) for mu at least -6 but no more than 2 and L(mu) for mu = 0, 1, and 2 are calculated for the helium sequence for atomic numbers (Z) up to 30 under a screened hydrogenic model. The model describes the atom by single-particle hydrogenic wave functions and treats the initial and the final state as characterized by two different effective charge parameters Zi and Zf, respectively. The differential oscillator strength of the screened hydrogenic model is asymptotically expanded. Assuming the value of 287.6 for the coefficient of the term epsilon to the -7/2 for helium atoms, the parameter Zf is determined for the helium sequence.

Khan, F.↗

Suppression of fine-structure splitting and oscillator strength of sodium D-line in a Debye plasma

We investigate theoretically the influence of static plasma screening on relativistic spin-orbit interaction-induced fine-structure splitting of the D-line doublet arising from the transitions 3p{sub 1/2}–3s{sub 1/2} and 3p{sub 3/2}–3s{sub 1/2} of the valence electron of a sodium atom embedded in a model plasma environment. The many-electron atomic problem is formulated first as an effective one-electron problem in which the interaction between the optically active valence electron and the atomic ion core is represented by an accurate parametric model potential including core-polarization correction, and then the plasma effect on the atomic system is simulated by the Debye-screening model for the valence-core interaction. It is observed that the magnitude of spin-orbit energy shift reduces for both the upper component 3p{sub 3/2} and the lower component 3p{sub 1/2} with increasing plasma screening strength, thereby reducing the spin-orbit energy separation between these two components as the screening becomes stronger. As a consequence, the magnitude of fine-structure splitting between the D{sub 1} and D{sub 2} line energies of sodium drops significantly with stronger plasma screening. The optical (absorption) oscillator strength for 3s → 3p transition is seen to reduce with stronger screening and this leads to a screening-induced gradual suppression of the 3p → 3s spontaneous decay rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Potential-specific structure at the hematite-electrolyte interface

The atomic-scale structure of interfaces between metal oxides and aqueous electrolytes controls their catalytic, geochemical, and corrosion behavior. Measurements that probe these interfaces in situ provide important details of ion and solvent arrangements, but atomically precise structural models do not exist for common oxide-electrolyte interfaces far from equilibrium. Using a novel cell, we measured the structure of the hematite (a-Fe 2 O 3 ) (110$\bar{2}$)-electrolyte interface under controlled electrochemical bias using synchrotron crystal truncation rod X ray scattering. At increasingly cathodic potentials, charge-compensating protonation of surface oxygen groups increases the coverage of specifically bound water while adjacent water layers displace outwardly and became disordered. Returning to open circuit potential leaves the surface in a persistent metastable protonation state. The flux of current and ions at applied potential is thus regulated by a unique interfacial electrolyte environment, suggesting that electrical double layer models should be adapted to the dynamically changing interfacial structure far from equilibrium.

electrochemistry↗

A Monte Carlo simulation for bipolar resistive memory switching in large band-gap oxides

A model that describes bilayered bipolar resistive random access memory (BL-ReRAM) switching in oxide with a large band gap is presented. It is shown that, owing to the large energy barrier between the electrode and thin oxide layer, the electronic conduction is dominated by trap-assisted tunneling. The model is composed of an atomic oxygen vacancy migration model and an electronic tunneling conduction model. We also show experimentally observed three-resistance-level switching in Ru/ZrO{sub 2}/TaO{sub x} BL-ReRAM that can be explained by the two types of traps, i.e., shallow and deep traps in ZrO{sub 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the Measurement of Elemental Abundance Ratios in Inner Galaxy H II Regions

Although abundance gradients in the Milky Way Galaxy certainly exist, details remain uncertain, particularly in the inner Galaxy, where stars and H II regions in the Galactic plane are obscured optically. In this paper we revisit two previously studied, inner Galaxy H II regions: G333.6-0.2 and W43. We observed three new positions in G333.6-0.2 with the Kuiper Airborne Observatory and reobserved the central position with the Infrared Space Observatory's Long Wavelength Spectrometer in far-infrared lines of S++, N++, N+, and O++. We also added the N+ lines at 122 and 205 microns to the suite of lines measured in W43 by Simpson et al.. The measured electron densities range from approx. 40 to over 4000 per cu cm in a single HII region, indicating that abundance analyses must consider density variations, since the critical densities of the observed lines range from 40 to 9000 per cu cm. We propose a method to handle density variations and make new estimates of the S/H and N/H abundance ratios. We find that our sulfur abundance estimates for G333.6-0.2 and W43 agree with the S/H abundance ratios expected for the gradient previously reported by Simpson et al., with the S/H values revised to be smaller owing to changes in collisional excitation cross sections. The estimated N/H, S/H, and N/S ratios are the most reliable because of their small corrections for unseen ionization states (< or approx. 10%). The estimated N/S ratios for the two sources are smaller than what would be calculated from the N/H and S/H ratios in our previous paper. If all low excitation H II regions had similar changes to their N/S ratios as a result of adding measurements of N+ to previous measurements of N++, there would be no or only a very small gradient in N/S. This is interesting because nitrogen is considered to be a secondary element and sulfur is a primary element in galactic chemical evolution calculations. We compute models of the two H II regions to estimate corrections for the other unseen ionization states. We find, with large uncertainties, that oxygen does not, have a high abundance, with the result that the N/O ratio is as high (approx. 0.35) as previously reported. The reasons for the uncertainty in the ionization corrections for oxygen are both the non-uniqueness of the H II region models and the sensitivity of these models to different input atomic data and stellar atmosphere models. We discuss these predictions and conclude that only a few of the latest models adequately reproduce H II region observations, including the well-known, relatively-large observed Ne++/O++ ratios in low- and moderate-excitation H II regions.

Simpson, Janet P.↗

Comparison of graphite, aluminum, and TransHab shielding material characteristics in a high-energy neutron field

Space radiation transport models clearly show that low atomic weight materials provide a better shielding protection for interplanetary human missions than high atomic weight materials. These model studies have concentrated on shielding properties against charged particles. A light-weight, inflatable habitat module called TransHab was built and shown to provide adequate protection against micrometeoroid impacts and good shielding properties against charged particle radiation in the International Space Station orbits. An experiment using a tissue equivalent proportional counter, to study the changes in dose and lineal energy spectra with graphite, aluminum, and a TransHab build-up as shielding, was carried out at the Los Alamos Nuclear Science Center neutron facility. It is a continuation of a previous study using regolith and doped polyethylene materials. This paper describes the results and their comparison with the previous study. Published by Elsevier Science Ltd.

NASA Center JSC↗

Monte Carlo Technique Used to Model the Degradation of Internal Spacecraft Surfaces by Atomic Oxygen

Atomic oxygen is one of the predominant constituents of Earth's upper atmosphere. It is created by the photodissociation of molecular oxygen (O2) into single O atoms by ultraviolet radiation. It is chemically very reactive because a single O atom readily combines with another O atom or with other atoms or molecules that can form a stable oxide. The effects of atomic oxygen on the external surfaces of spacecraft in low Earth orbit can have dire consequences for spacecraft life, and this is a well-known and much studied problem. Much less information is known about the effects of atomic oxygen on the internal surfaces of spacecraft. This degradation can occur when openings in components of the spacecraft exterior exist that allow the entry of atomic oxygen into regions that may not have direct atomic oxygen attack but rather scattered attack. Openings can exist because of spacecraft venting, microwave cavities, and apertures for Earth viewing, Sun sensors, or star trackers. The effects of atomic oxygen erosion of polymers interior to an aperture on a spacecraft were simulated at the NASA Glenn Research Center by using Monte Carlo computational techniques. A two-dimensional model was used to provide quantitative indications of the attenuation of atomic oxygen flux as a function of the distance into a parallel-walled cavity. The model allows the atomic oxygen arrival direction, the Maxwell Boltzman temperature, and the ram energy to be varied along with the interaction parameters of the degree of recombination upon impact with polymer or nonreactive surfaces, the initial reaction probability, the reaction probability dependence upon energy and angle of attack, degree of specularity of scattering of reactive and nonreactive surfaces, and the degree of thermal accommodation upon impact with reactive and non-reactive surfaces to be varied to allow the model to produce atomic oxygen erosion geometries that replicate actual experimental results from space. The degree of erosion of various interior locations was compared with the erosion that would occur external to the spacecraft. Results of one cavity model indicate that, at depths into a two-dimensional cavity that are equal to 10 cavity widths, the erosion on the walls of the cavity is less than that on the top surface by over 2 orders of magnitude. Wall erosion near the surface of a cavity depends on which wall is receiving direct atomic oxygen attack. However, deep in the cavity little difference is present. Testing of various cavity models such as these gives spacecraft designers an indication of the level of threat to sensitive interior surfaces for different geometries. Even though the Monte Carlo model is two-dimensional, it can be used to provide qualitative information about spacecraft openings that are three-dimensional by offering reasonable insight as to the nature of the attenuation of damage that occurs within a spacecraft in low Earth orbit. As shown, there is more erosion on the side seeing direct atomic oxygen attack until a depth of approximately 5 times the width of the opening, where the erosion is the same on both sides.

Banks, Bruce A.↗

Benchmarking large language models for materials synthesis: The case of atomic layer deposition

In this work, we introduce an open-ended question benchmark, ALDbench, to evaluate the performance of large language models (LLMs) in materials synthesis, and, in particular, in the field of atomic layer deposition, a thin film growth technique used in energy applications and microelectronics. Our benchmark comprises questions with a level of difficulty ranging from the graduate level to domain expert current with the state of the art in the field. Human experts reviewed the questions along the criteria of difficulty and specificity, and the model responses along four different criteria: overall quality, specificity, relevance, and accuracy. We ran this benchmark on an instance of OpenAI’s GPT-4o. The responses from the model received a composite quality score of 3.7 on a 1–5 scale, consistent with a passing grade. However, 36% of the questions received at least one below average score. An in-depth analysis of the responses identified at least five instances of suspected hallucination. Finally, we observed statistically significant correlations between the difficulty of the question and the quality of the response, the difficulty of the question and the relevance of the response, the specificity of the question, and the accuracy of the response as graded by the human experts. Furthermore, this emphasizes the need to evaluate LLMs across multiple criteria beyond difficulty or accuracy.

Artificial intelligence↗