Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASHES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

On the use of remote infrasound and seismic stations to constrain the eruptive sequence and intensity for the 2014 Kelud eruption

The February 2014 eruption of Kelud volcano (Indonesia) destroyed most of the instruments near it. We use remote seismic and infrasound sensors to reconstruct the eruptive sequence. The first explosions were relatively weak seismic and infrasound events. A major stratospheric ash injection occurred a few minutes later and produced long-lasting atmospheric and ground-coupled acoustic waves that were detected as far as 11,000 km by infrasound sensors and up to 2300 km away on seismometers. A seismic event followed ~12 minutes later and was recorded 7000 km away by seismometers. We estimate a volcanic intensity around 10.9, placing the 2014 Kelud eruption between the 1980 Mount St. Helens and 1991 Pinatubo eruptions intensities. As a result, we demonstrate how remote infrasound and seismic sensors are critical for the early detection of volcanic explosions, and how they can help to constrain and understand eruptive sequences.

58 GEOSCIENCES↗
DOE OSTI2018

Monitoring and Modeling the Rapid Evolution of Earth's Newest Volcanic Island: Hunga Tonga Hunga Ha'apai (Tonga) Using High Spatial Resolution Satellite Observations

We have monitored a newly erupted volcanic island in the Kingdom of Tonga, unofficially known as Hunga Tonga Hunga Ha'apai , by means of relatively frequent high spatial resolution (~50 cm) satellite observations. The new ~1.8 km 2 island formed as a tuff cone over the course of a month-long hydromagmatic eruption in early 2015 in the Tonga-Kermadec volcanic arc. Such ash-dominated eruptions usually produce fragile subaerial landscapes that wash away rapidly due to marine erosion, as occurred nearby in 2009. Our measured rates of erosion are ~0.00256 km 3 /year from derived digital topographic models. Preliminary measurements of the topographic expression of the primary tuff cone over ~30 months suggest a lifetime of ~19 years (and potentially up to 42 years). The ability to measure details of a young island's landscape evolution using satellite remote sensing has not previously been possible at these spatial and temporal resolutions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

Radiative and Chemical Response to Interactive Stratospheric Sulfate Aerosols in Fully Coupled CESM1(WACCM)

We present a new version of the Community Earth System Model, version 1 (CESM1) with the Whole Atmosphere Community Climate Model (WACCM) featuring numerous improvements that are unique among earth system models. Improved horizontal resolution, dynamics, and chemistry now provide the development of an internally generated quasi-biennial oscillation, and significant improvements to temperatures and ozone throughout the stratosphere. The prognostic treatment of stratospheric sulfate aerosols is shown to represent well the evolution of stratospheric aerosol optical depth and perturbations to solar and longwave radiation following volcanic eruptions. We identify the inclusion of interactive OH chemistry as crucial to the study of aerosol formation following large inputs of SO 2 to the stratosphere. We show that depletion of OH levels within the dense SO 2 cloud in the first weeks following the June 1991 eruption of Mt. Pinatubo significantly prolonged the e-folding decay time for SO 2 oxidation to 47 days. Previous observational and model studies showing a 30-day decay time have not accounted for the large initial losses of SO 2 on ash and ice in the first 7-9 days following the eruption, and have not correctly accounted for OH depletion. The completeness of the chemistry, dynamics, and aerosol microphysics in WACCM uniquely qualify it for studies of stratospheric sulfate aerosol geoengineering.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Chapter 8: Biomass Pyrolysis Oils

Fast pyrolysis is heating on the order of 1000 degrees C/s in the absence of oxygen to 40-600 degrees C, which causes decomposition of the biomass. Liquid product yield from biomass can be as much as 80% of starting dry weight and contains up to 75% of the biomass energy content. Other products are gases, primarily carbon monoxide, carbon dioxide, and methane, as well as solid char and ash. Residence time in the reactor is only 0.5-2 s so that relatively small, low-capital-cost reactors can be used. The low capital cost combined with greenhouse gas emission reductions relative to petroleum fuels of 50-95% makes pyrolysis an attractive process. The pyrolysis liquids have been investigated as a refinery feedstock and as stand-alone fuels. Utilization of raw pyrolysis oil has proven challenging. The organic fraction is highly corrosive because of its high organic acid content. High water content lowers the net heating value and can increase corrosivity. It can be poorly soluble in petroleum or petroleum products and can readily absorb water. Distillation residues can be as high as 50%, viscosity can be high, oils can exhibit poor stability in storage, and they can contain suspended solids. The ignition quality of raw pyrolysis oils is poor, with cetane number estimates ranging from 0 to 35, but more likely to be in the lower end of that range. While the use of raw pyrolysis oils in certain specific applications with specialized combustion equipment may be possible, raw oils must be significantly upgraded for use in on-highway spark-ignition (SI) and compression-ignition (CI) engines. Upgrading approaches most often involve catalytic hydrodeoxygenation, one of a class of reactions known as hydrotreating or hydroprocessing. This chapter discusses the properties of raw and upgraded pyrolysis oils, as well as the potential for integrating biomass pyrolysis with a petroleum refinery to significantly reduce the hydroprocessing cost.

09 BIOMASS FUELS↗
DOE OSTI2019

Supply and value chain analysis of mixed biomass feedstock supply system for lignocellulosic sugar production

Here the sustainable supply of high-quality, low-cost biomass feedstock to cellulosic biorefineries is still a challenge. Utilizing corn stover as the single feedstock to a biorefinery also poses a source of risk to seasonal feedstock availability, affordability, and sustainability. Implementing a year-round feedstock switching strategy or utilizing an optimal mixture of corn stover, miscanthus, and switchgrass is demonstrated to diminish these concerns while reducing the cost of sugar production by as much as 3.8% and 13.6%, respectively, when compared to a baseline sugar price of 441.9 $ metric ton-1 (t) attributed to a fixed corn stover feedstock basis. This study determines that a mixing ratio of corn stover, miscanthus, and switchgrass of 36%, 50%, and 14%, respectively, minimizes the selling price of sugar. If miscanthus is sufficiently available in the future, its fraction could be further increased to 70% by reducing the fraction of corn stover. We find that the mixed feedstock considered in this study reduces the nutrient replacement and feedstock transportation costs and improves the quality of feedstock (determined by total carbohydrates and ash) relative to corn stover alone. Results suggest that a high-quality feedstock with a high carbohydrate content is an important metric for consideration, beyond strictly the feedstock cost, to reduce the selling price of sugar and its uncertainties. In the future this may be supported by the increased availability of higher carbohydrate feedstocks such as miscanthus.

09 BIOMASS FUELS↗
DOE OSTI2020

Briquetting characteristics of woody and herbaceous biomass blends: Impact on physical properties, chemical composition, and calorific value

Abstract Intercropping (or polyculture) is gaining a lot of interest as it increases yields, allows better utilization of resources (water and nutrients), and provides better land management. The objective of this study is to understand the briquetting characteristics of woody and herbaceous biomass blends, which might result from intercropping. Tests were conducted on blends of lodgepole pine, switchgrass, and corn stover biomass using three hammer mill screen sizes (i.e., 4.8, 12.7, and 19.05 mm), three blend moistures (12%, 15%, and 18%, w.b.), and two‐ and three‐blend ratios (i.e., 1:1 and 1:1:1) using a pilot‐scale hydraulic briquette press. The briquette properties, such as unit and bulk density, durability rating after 5 days of storage (as they tend to attain stable density), and the energy consumption of the process were measured. The results indicate that moisture content of 12% and 15% (w.b.) and smaller hammer mill screen size of 4.8 mm increased the unit and bulk densities to >750 and >430 kg/m 3 and moisture content (15% and 18% (w.b.)) and hammer mill screen size of 12.7 and 19.05 mm produced briquettes with durability rating values of >95%. The higher moisture content of 18% (w.b.) and the hammer mill screen size of 12.7 and 19.05 mm had the highest energy consumption. The proximate and ultimate analysis showed that energy content improved by blending lodgepole pine with both corn stover and switchgrass and also showed increased calorific value and reduced ash content. Scanning electron microscopy micrographs showed interlocking of particles and cracks in the briquettes. © 2020 Society of Chemical Industry and John Wiley & Sons, Ltd

Tumuluru, Jaya Shankar↗
DOE OSTI2023

Proxy quality control of biomass particles using thermogravimetric analysis and Gaussian process regression models

Abstract The temperature experienced by reactants during preparation in a reactor is a key component in determining the yield and homogeneity of usable chemical products such as biomass particles. Thermocouples with sensors can be used to monitor spatial temperature gradients within reactors but these sensors are often too expensive and/or invasive. The present work proposes a strategy to identify optimal machine learning models to infer the maximum effective temperature experienced by particles during oxidative biomass torrefaction using key thermochemical combustion parameters. The maximum rate of weight loss, the corresponding temperature, and fixed carbon content on a dry‐ash‐free basis are used as literature‐based predictor variables obtained from thermogravimetric analysis. The evaluation of 24 machine‐learning models using the standard tenfold cross‐validation method suggests that the exponential Gaussian process regression (GPR) model is the most effective, followed by other GPR models. These high‐performing GPR models were also utilized to predict the effective preparation temperature distribution of reactor‐produced biomass particles under eight conditions of varying residence time and air‐to‐biomass ratio. The effective preparation temperature and residence time of individual biomass particles were then encoded into the torrefaction severity factor and used to estimate the energy yield of the reactor output as a novel quality control method. © 2023 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗
DOE OSTI2019

Long‐term variation in environmental conditions influences host–parasite fitness

Abstract Long‐term data on host and parasite fitness are important for predicting how host–parasite interactions will be altered in an era of global change. Here, we use data collected from 1997 to 2013 to explore effects of changing environmental conditions on bird–blowfly interactions in northern New Mexico. The objectives of this study were to examine what climate variables influence blowfly prevalence and intensity and to determine whether blowflies and climate variables affect bird fledging success. We examined how temperature, precipitation, and drought affect two parasitic blowflies and their hosts, Western Bluebirds ( Sialia mexicana ) and Ash‐throated Flycatchers ( Myiarchus cinerascens ). We found that blowfly prevalence did not change over time. Blowfly intensity increased over time in bluebird nests, but not in flycatcher nests. More blowflies result in slightly higher fledging success in bluebirds, but not flycatchers. There was a significant interaction between blowflies and precipitation on bluebird fledging success. For flycatchers, there was a significant interaction between blowflies and temperature and between blowflies and drought severity on fledging success. Given that the southwest is projected to be hotter and have more frequent and prolonged droughts, we predict that flycatchers may be negatively impacted by blowflies if these trends continue. Future work should focus on investigating the role of both blowflies and climate on fledging success. Climate patterns may negatively impact host fitness through altered parasite pressure.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Consumption of terrestrial organic matter in the rocky intertidal zone along the central Oregon coast

Abstract Terrestrial organic matter ( TOM ) constitutes an important source of energy in many aquatic environments. This is the first study to compare the consumption of terrestrial leaves ( Alnus rubra ) to high‐quality ( Nereocystis luetkeana ) and low‐quality ( Fucus gardneri ) sources of drift kelp and low‐quality seagrass ( Phyllospadix spp.) in pools of the rocky intertidal zone on Cape Arago, Oregon, USA . On average, 1.02 kg ash‐free dry mass ( AFDM ) per day of TOM was transported by small forested streams during fall leaf abscission to the rocky intertidal zone in small pocket bays. Leaves of A. rubra (red alder) varied in wrack from negligible (12 g AFDM /m 2 ) on some beaches to the primary source of detritus on others (256 g AFDM /m 2 ). Long‐term feeding experiments (months) showed that consumption rates of A. rubra in the spring (19.7% of the initial pack biomass) and in the fall (52% of the initial pack biomass) were intermediate between those of N. luetkeana (fully consumed) and Phyllospadix spp. (never >10% consumed of the initial pack biomass). Long‐term experiments also showed that conditioned fall‐shed leaves of A. rubra were consumed at a faster rate (52.3% of initial pack biomass) than spring‐shed leaves of A. rubra (16.8% of initial pack biomass). Short‐term feeding experiments again showed that consumption of A. rubra in the spring (18.6% of initial pack biomass over 3 d) and fall (16.7% over 7 d) was intermediate between N. luetkeana (57.3% consumed over 3 d in the spring and 60.7% over 7 d in the fall) and Phyllospadix spp. (<1% consumed in the spring). Except for Phyllospadix spp., consumption rates followed polyphenolic concentrations in that, N. luetkeana (418 mg/mL) > A. rubra (3415 mg/mL) > F. gardneri (8098 mg/mL). Phyllospadix spp. was rarely consumed despite a fairly low concentration of phenolics (800 mg/mL). In the temperate zone, leaves of A . rubra may constitute an important source of energy during the fall and winter when more nutritious marine resources dieback, such as single‐celled algae and kelp (e.g., N. luetkeana ).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Corn stover‐derived porous carbon for asymmetric supercapacitors

In this investigation, hydrothermal liquefaction‐derived hydrochar from pulverized corn stover (avg. particle size 1.12 mm and ash content 6.75 wt%) is chemically activated with aqueous KOH in the presence of Pluronic F127 surfactant and thermally treated further up to 800°C to generate porous carbon (POC) with higher specific surface area and porosity. POC obtained under different processing conditions is thoroughly characterized by Brunauer‐Emmett‐Teller surface area analyzer, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Metallic impurity present in POC is characterized by inductively coupled plasma mass spectrometry. Higher specific surface area POC is observed with the use of the surfactant during the activation process. Fully characterized POC is used with (Mn, Ti)‐mixed oxide electrode to fabricate asymmetric supercapacitor (ASC). Specific capacitance of ASC is measured by cyclic voltammetry (CV) technique using Gamry G‐300 potentiostat/galvanostat/ZRA. CV plots are obtained with different voltage scan rates whereas galvanostatic charge‐discharge plots are studied by varying the current density. Renewable corn stover‐derived POC prepared using Pluronic F127/KOH activation method is found to be highly suitable as an electrode material because of higher capacitance and electrochemical stability over 100 charging‐discharging cycles.

25 ENERGY STORAGE↗
DOE OSTI2017

Regional patterns of postwildfire streamflow response in the Western United States: The importance of scale‐specific connectivity

Abstract Wildfires can impact streamflow by modifying net precipitation, infiltration, evapotranspiration, snowmelt, and hillslope run‐off pathways. Regional differences in fire trends and postwildfire streamflow responses across the conterminous United States have spurred concerns about the impact on streamflow in forests that serve as water resource areas. This is notably the case for the Western United States, where fire activity and burn severity have increased in conjunction with climate change and increased forest density due to human fire suppression. In this review, we discuss the effects of wildfire on hydrological processes with a special focus on regional differences in postwildfire streamflow responses in forests. Postwildfire peak flows and annual water yields are generally higher in regions with a Mediterranean or semi‐arid climate (Southern California and the Southwest) compared to the highlands (Rocky Mountains and the Pacific Northwest), where fire‐induced changes in hydraulic connectivity along the hillslope results in the delivery of more water, more rapidly to streams. No clear streamflow response patterns have been identified in the humid subtropical Southeastern United States, where most fires are prescribed fires with a low burn severity, and more research is needed in that region. Improved assessment of postwildfire streamflow relies on quantitative spatial knowledge of landscape variables such as prestorm soil moisture, burn severity and correlations with soil surface sealing, water repellency, and ash deposition. The latest studies furthermore emphasize that understanding the effects of hydrological processes on postwildfire dynamic hydraulic connectivity, notably at the hillslope and watershed scales, and the relationship between overlapping disturbances including those other than wildfire is necessary for the development of risk assessment tools.

Hallema, Dennis W.↗
DOE OSTI2019

Total Recoverable Aluminum: Not Totally Relevant for Water Quality Standards

Abstract A large water quality data set, representing more than 100 surface-water locations sampled from 2007 to 2017 in the Los Alamos area of New Mexico, USA's Pajarito Plateau, was assembled to evaluate Al concentrations in unfiltered and filtered samples. Aluminum concentrations often exceeded United States Environmental Protection Agency (USEPA) and New Mexico ambient water quality criteria (AWQC), regardless of filter size and sample location. However, AWQC are based on laboratory toxicity studies using soluble Al salts and do not reflect natural conditions in Pajarito Plateau surface waters. The plateau is predominately covered by glassy and recrystallized volcanic ashes (e.g., Bandelier Tuff) containing colloidal to sand-sized aluminosilicates. Samples from natural background drainages and areas downstream of developed regions exhibited similar Al concentrations, suggesting that AWQC exceedances are caused by naturally elevated Al concentrations. Solubility calculations indicated that most samples were oversaturated with respect to amorphous Al(OH)3(s). Therefore, AWQC exceedances are likely artifacts of the “total recoverable” sample preparation, which includes acidification and partial digestion, thereby liberating nonbioavailable Al from aluminosilicates. Accordingly, Al concentrations were strongly associated with suspended sediment concentrations (SSCs), implying that aluminosilicates in suspended sediment contributed to AWQC exceedances and Al oversaturation. Solid-phase particle characterization, using X-ray diffraction (XRD) and scanning electron microscopy with electron dispersive spectroscopy (SEM/EDS) did not identify potentially bioavailable amorphous Al(OH)3(s) in any sample tested. Thus, current sample collection and analysis protocols should not be used to evaluate attainment of Al AWQC on the Pajarito Plateau or locations where aluminosilicates are substantial contributors to total recoverable Al. A sample preparation method (e.g., pH 4 extraction) capable of differentiating nonbioavailable and bioavailable forms of Al is recommended. Otherwise, current New Mexico and USEPA sample preparation approaches will continue to generate artifactual AWQC exceedances in surface waters that contain aluminosilicates. Integr Environ Assess Manag 2019;00:1–14. © 2019 SETAC

Ryan, Adam C.↗
DOE OSTI2025

Integration of CO 2 capture and microalgae cultivation: demonstration assessment of outdoor Scenedesmus acutus cultivation using gaseous ammonia as a nitrogen source

Towards the goal of integrating CO 2 capture using aqueous ammonia with its utilization for algae cultivation, Scenedesmus acutus (UTEX B72) was grown in 1100 L open raceway ponds using CO 2 and NH 3 supplied from gas cylinders. CO 2 /NH 3 mole ratios of 7 and 10 were employed, the gas mixture acting as a surrogate for the output from a CO 2 scrubbing system using aqueous ammonia. Compared to Scenedesmus acutus grown in open ponds using gaseous CO 2 and NaNO 3 as the N-source, the ponds supplied with gaseous CO 2 and NH 3 displayed higher productivity at both CO 2 /NH 3 ratios, with the higher ratio providing the best growth. Depending on the culturing conditions and CO 2 /NH 3 ratio, CO 2 utilization ranged up to 15.8% and NH 3 utilization to 23.0%. These rather low values reflect the fact the high CO 2 /NH 3 feed rate used, resulting in a substantial release of NH 3 from the ORPs (~45%). Finally, these findings demonstrate the suitability of gaseous NH 3 as a N-source for microalgae cultivation, while highlighting the need for a control strategy that closely balances the CO 2 /NH 3 supply with the algae growth rate. The produced algae biomass possessed a high protein and low ash content, rendering it particularly suitable for use as a bioplastic feedstock.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Utilization of Ultrasonication as a Method of Reducing Organic and Inorganic Contamination in Post‐Consumer Plastic Film Waste

Post-consumer plastic film waste often carries organic and inorganic contaminants that challenge recycling processes and affect the quality of recycled products. An effective contaminant removal procedure through washing such single-used plastic films (SUPFs) can address environmental and waste management concerns. This study compares the efficiency of different washing techniques in reducing SUPF contamination. To evaluate the efficacy of each washing technique, film samples collected from material recovery facilities are individually exposed to friction, ultrasonic-assisted, and a combination of both washes. Thermal analysis indicates that the polymers' melting temperature, crystallization temperature, and crystallinity remain unaffected by the washing methods, demonstrating method aptness. Confocal laser scanning microscope images show that washing results in a cleaner sample surface. 91% ash reduction during the combined wash treatment indicates a high method efficiency compared to the individual friction and ultrasonic wash procedures. This is further validated by reducing characteristic contaminant IR bands (3600–3000, 1750–1600, and 1100–1000 cm −1 ). Elements of concern such as Cd, Cr, Hg, and Pb in SUPFs after each washing technique applied conform with regulations (<100 ppm) for packaging products. This research shows the novel ultrasonic washing reduces more contamination than friction with shorter wash times and no surfactants.

42 ENGINEERING↗
DOE OSTI2024

Exploring biofiber properties and their influence on biocomposite tensile properties

Biofibers serve as effective reinforcements for neat polylactic acid (PLA) in biocomposites, offering an attractive opportunity to decarbonize the manufacturing sector of the United States by displacing fossil-based reinforcement fibers such as carbon fibers. Also, biofiber production can stimulate economic growth in rural economies, fueling sustainable development. PLA resins are commonly compounded with biofibers to create biocomposites suitable for additive manufacturing. PLA-biofiber composites often exhibit better overall material properties than neat (pure) PLA, but the associations between biofiber properties and the material properties of their biocomposites remain largely unexplored. Hence, this research delves into a comprehensive exploration of diverse biofibers, scrutinizing their physical and chemical attributes, including size, shape, ash content and biochemical composition. The study meticulously analyzes the flow properties of each biofiber and elucidates the ultimate tensile strengths and Young's modulus of corresponding biocomposite samples. Noteworthy correlations between biofiber and biocomposite tensile properties are uncovered, shedding light on critical interrelationships. The study introduces an approach employing regression models to predict the ultimate tensile strength and Young's modulus of biocomposites. These models, validated with a cross-validation technique, exhibit remarkable predictive accuracy, particularly in estimating ultimate tensile strength. © 2024 Oak Ridge National Laboratory managed by UT-Battelle, LLC and The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Evolution of silicon bulk lifetime during III–V‐on‐Si multijunction solar cell epitaxial growth

Abstract The evolution of Si bulk minority carrier lifetime during the heteroepitaxial growth of III–V on Si multijunction solar cell structures via metal‐organic chemical vapor deposition (MOCVD) has been analyzed. In particular, the impact on Si lifetime resulting from the four distinct phases within the overall MOCVD‐based III–V/Si growth process were studied: (1) the Si homoepitaxial emitter/cap layer; (2) GaP heteroepitaxial nucleation; (3) bulk GaP film growth; and (4) thick GaAs y P 1‐y compositionally graded metamorphic buffer growth. During Phase 1 (Si homoepitaxy), an approximately two order of magnitude reduction in the Si minority carrier lifetime was observed, from about 450 to ≤1 µs. However, following the GaP nucleation (Phase 2) and thicker film (Phase 3) growths, the lifetime was found to increase by about an order of magnitude. The thick GaAs y P 1‐y graded buffer was then found to provide further recovery back to around the initial starting value. The most likely general mechanism behind the observed lifetime evolution is as follows: lifetime degradation during Si homoepitaxy because of the formation of thermally induced defects within the Si bulk, with subsequent lifetime recovery due to passivation by fast‐diffusing atomic hydrogen coming from precursor pyrolysis, especially the group‐V hydrides (PH 3 , AsH 3 ), during the III–V growth. These results indicate that the MOCVD growth methodology used to create these target III–V/Si solar cell structures has a substantial and dynamic impact on the minority carrier lifetime within the Si substrate. Copyright © 2015 John Wiley & Sons, Ltd.

García‐Tabarés, Elisa↗
DOE OSTI2021

Heterogeneous multiphase flow properties of volcanic rocks and implications for noble gas transport from underground nuclear explosions

Of interest to the Underground Nuclear Explosion Signatures Experiment are patterns and timing of explosion-generated noble gases that reach the land surface. The impact of potentially simultaneous flow of water and gas on noble gas transport in heterogeneous fractured rock is a current scientific knowledge gap. This article presents field and laboratory data to constrain and justify a triple continua conceptual model with multimodal multiphase fluid flow constitutive equations that represents host rock matrix, natural fractures, and induced fractures from past underground nuclear explosions (UNEs) at Aqueduct and Pahute Mesas, Nevada National Security Site, Nevada, USA. Capillary pressure from mercury intrusion and direct air–water measurements on volcanic tuff core samples exhibit extreme spatial heterogeneity (i.e., variation over multiple orders of magnitude). Petrographic observations indicate that heterogeneity derives from multimodal pore structures in ash-flow tuff components and post-depositional alteration processes. Comparisons of pre- and post-UNE samples reveal different pore size distributions that are due in part to microfractures. Capillary pressure relationships require a multimodal van Genuchten (VG) constitutive model to best fit the data. Relative permeability estimations based on unimodal VG fits to capillary pressure can be different from those based on bimodal VG fits, implying the choice of unimodal vs. bimodal fits may greatly affect flow and transport predictions of noble gas signatures. The range in measured capillary pressure and predicted relative permeability curves for a given lithology and between lithologies highlights the need for future modeling to consider spatially distributed properties.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2013

Elastic and transition form factors of the Δ(1232)

Predictions obtained with a confining, symmetry-preserving treatment of a vector Ⓧ vector contact interaction at leading-order in a widely used truncation of QCD’s Dyson–Schwinger equations are presented for Δ and Ω baryon elastic form factors and the γN → Δ transition form factors. This simple framework produces results that are practically indistinguishable from the best otherwise available, an outcome which highlights that the key to describing many features of baryons and unifying them with the properties of mesons is a veracious expression of dynamical chiral symmetry breaking in the hadron bound-state problem. The following specific results are of particular interest. The Δ elastic form factors are very sensitive to m Δ . Hence, given that the parameters which define extant simulations of lattice-regularised QCD produce Δ-resonance masses that are very large, the form factors obtained therewith are a poor guide to properties of the Δ(1232). Considering the Δ-baryon’s quadrupole moment, whilst all computations produce a negative value, the conflict between theoretical predictions entails that it is currently impossible to reach a sound conclusion on the nature of the Δ-baryon’s deformation in the infinite momentum frame. Furthermore, results for analogous properties of the Ω baryon are less contentious. In connection with the N → Δ transition, the Ash-convention magnetic transition form factor falls faster than the neutron’s magnetic form factor and nonzero values for the associated quadrupole ratios reveal the impact of quark orbital angular momentum within the nucleon and Δ; and, furthermore, these quadrupole ratios do slowly approach their anticipated asymptotic limits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗