Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Spin Formability of High-Strength Aluminum Alloys for Aerospace Applications

Near-net-shape fabrication of launch vehicle tanks and aircraft fuselages is critical for meeting the growing demand for unitized structures in the aerospace industry. Cryogenic tank manufacturing relies on multi-piece construction requiring hundreds of meters of welds that increase both structural weight and inspection time. Currently, fuselages have an immense part count requiring tens of thousands of rivets and long assembly time. NASA is pursuing spin and flow forming technology for manufacturing such structures with minimal assembly. These processes enable domes and stiffened barrels to be fabricated using single-piece construction, offering significant manufacturing rate benefits over conventional methods. However, Al alloys with sufficient formability, such as Al 6061, tend to have insufficient strength for aerospace structural applications. In contrast, alloys with higher strength, such as Al 2139 and Al 2050, exhibit insufficient formability during ambient temperature forming. This study investigates the spin formability of competitive 5xxx and 2xxx series Al alloys, identifies defects impeding formability, and sheds light on future processing routes for successful forming.

Aluminum↗
NASA NTRS2023

Crystallographic and TEM Features of a TBC/Ti2AlC MAX Phase Interface after 1300°C Burner Rig Oxidation

A FIB/STEM interfacial study was performed on a TBC/Ti 2 AlC MAX phase system, oxidized in an aggressive burner rig test (Mach 0.3 at 1300 °C for 500 h). The 7YSZ TBC, α-Al 2 O 3 TGO, and MAXthal 211 TM Ti 2 AlC base were variously characterized by TEM/STEM, EDS, SADP, and HRTEM. The YSZ was a mix of “clean” featureless and “faulted” high contrast grains. The latter exhibited ferro-elastic domains of high Y content tetragonal t″ variants. No martensite was observed. The TGO was essentially a duplex α-Al 2 O 3 structure of inner columnar plus outer equiaxed grains. It maintained a perfectly intact, clean interface with the Ti 2 AlC substrate. The Ti 2 AlC substrate exhibited no interfacial Al-depletion zone but, rather, numerous faults along the basal plane of the hexagonal structure. These are believed to offer a means of depleting Al by forming crystallographic, low-Al planar defects, proposed as Ti 2.5 AlC 1.5 . These characterizations support and augment prior optical, SEM, and XRD findings that demonstrated remarkable durability for the YSZ/Ti 2 AlC MAX phase system in aggressive burner tests.

TI2AlC↗
NASA NTRS2023

What’s That Supposed to Mean? Capturing Micro-Behaviors in Teams

Future long-duration space exploration (LDSE) crews will require extensive coordination, cooperation, and team functioning as they face a myriad of challenges rooted in both taskwork and teamwork (Bell et al., 2015; Landon et al., 2018). While exposed to extreme conditions, crew members must navigate living and working together in prolonged confinement. Moreover, astronaut teams are becoming increasingly diverse, introducing significant variability in team composition. This increasing diversity, alongside traditional constraints of LDSE, introduces additional challenges into effective team functioning. To date, most methods for capturing team functioning rely on self-report measures. Such measures are prone to several limitations, including but not limited to social desirability bias, halo effect, and leniency effects (Trull & Ebner-Priemer, 2013), which skew data and limit nuanced understandings of phenomena at play. Self-report measures broadly capture team functioning, lending the nature of such methods to identifying underlying “macro”-behaviors (i.e., behaviors that are long-standing and last over time). However, team functioning is far more complex than a series of macro-behaviors, rendering reliance on self-report data deficient for accurate measurement. Recent research demonstrates the potential of alternative methods for capturing team functioning, such as speech and physiological data (Chaffin et al., 2017; Murray & Oertel, 2018). Consequently, these methods are more suitable for capturing micro-behaviors: brief, often unconscious expressions that affect the extent to which an individual feels included by others around them (Paletz et al., 2013). Micro-behaviors can be further classified into micro-aggressions (i.e., subtle, negative exchanges; Keller & Galgay, 2010) or micro-affirmations (i.e., subtle, positive exchanges; Kyte et al. 2020), both of which influence team functioning. Due to the subtle nature of micro-behaviors, contextual factors have a significant impact when determining if it is aggressive or affirmative. Additionally, several iterations of micro-behaviors can have lingering effects on team interactions. For example, the use of “mm-hmm” by a crew member can function as both a micro-affirmation and micro-aggression. Specifically, it can be indication of active listening (i.e., micro-affirmation) or as an expression of annoyance (i.e., aggression) depending on the context in which it occurs. Auditory features (e.g., tone, frequency) can help delineate between the two forms; however, the contextual factors (e.g., previous interactions between team members, crew demographics) add a layer of complexity that render auditory features alone as insufficient to capture micro-behaviors. Consequently, this paper seeks to provide a novel approach in which multi-modal data (i.e., auditory features and contextual features) are used in a random-forest model to better identify distinguishing characteristics between micro-affirmations and micro-aggressions. In turn, detected micro-behaviors are used to predict team performance, thereby demonstrating the value of capturing micro-behaviors as supplemental data to macro-behaviors.

Sydney Begerowski↗
NASA NTRSDate not supplied

Anhydrous Primary Minerals in Ryugu, Ivuna, and Bennu

Samples returned from asteroid Ryugu are chemically and mineralogically similar to CI chondrites [e.g., 1–3]. Both are predominantly composed of low-temperature aqueously formed secondary minerals, whereas high-temperature anhydrous primary minerals, such as olivine, low-Ca pyroxene, spinel, and hibonite, are rarely present. Using secondary ion mass spectrometry (SIMS; Cameca ims-1280HR at Hokkaido University), we performed O [4] and Al–Mg [5] isotope measurements of anhydrous primary minerals in samples of Ryugu and the Ivuna CI chondrite to constrain their origin.Anhydrous primary minerals in our samples of Ryugu and Ivuna occur mostly as monomineralic isolated grains embedded in hydrated matrix. Their O-isotope compositions are distributed along the slope-1 line on the O three-isotope diagram and range from Δ17O ~ –23 to 0‰. Mg-Al spinel grains are 16O-rich (Δ17O ~ –23‰). Low-Ca pyroxene grains are 16O-poor (Δ17O ~ –5‰). Olivine grains show a bimodal distribution of O-isotope composition:10 of 34 grains measured are 16O-rich (Δ17O ~ –23‰) and 24 grains are 16O-poor (Δ17O ~ –7 to 0‰). We found refractory inclusions composed of Mg-Al spinel and hibonite, one from Ryugu and one from Ivuna. Also, in Ivuna, we found an amoeboid olivine aggregate ( AOA) composed of olivine, diopside, anorthite, and Mg-Al spinel and an inclusion composed of olivine and Mg-Al spinel. The minerals in all of these inclusions are 16O-rich (Δ17O ~ –24‰).The 16O-rich grains and inclusions are mineralogically and O-isotopically similar to calcium-aluminum–rich inclusions (CAIs) and AOAs reported in other carbonaceous chondrites [6, 7]. In addition, the initial 26Al/27Al ratios of the two spinel-hibonite inclusions are inferred as ~4.4 × 10–5, also similar to most CAIs in carbonaceous chondrites [6, 8]. The range of Δ17O values for the 16O-poor olivine and low-Ca pyroxene grains is consistent withthat of these minerals in chondrules in most carbonaceous chondrites [9]. Moreover, the most frequent Δ17O value (–6‰) for Mg-rich (Mg# > 97) olivine grains is identical to those for chondrules. Although CI chondrites and Ryugu samples are devoid of chondrules, the 16O-poor grains most likely represent fragments of chondrule-like objects. The presence of both 16O-poor chondrule-like and 16O-rich refractory inclusion–like minerals in Ryugu and Ivuna suggests that some of their building blocks are similar to those of other carbonaceous chondrite groups. They both probably formed in the inner solar protoplanetary disk and were subsequently transported outward.Preliminary data for petrography of asteroid Bennu samples and chemical and isotopic compositions of theiranhydrous primary minerals will also be presented in the meeting.

N Kawasaki↗
NASA NTRSDate not supplied

Improving Ocean Reanalyses and ENSO Forecasts By Assimilation of Rain Corrected Satellite Sea Surface Salinity Using the GMAO S2S Forecast System

During the past years, we have seen that the La Nina to El Nino transition has had a significant global socio-economic impact and so has been the key focus for improving coupled ocean-atmosphere forecasts. Assimilation of satellite altimetry and subsurface temperature and salinity from (mostly) Argo help to improve the initialization of the thermocline, while satellite Sea Surface Temperature (SST) aids in constraining surface heat-fluxes, leading to improved subseasonal to seasonal forecasts of the coupled system. However, few studies have focused on improving the fresh-water flux and near-surface density and mixing through assimilation of satellite sea surface salinity (SSS). For expediency, the few ocean models that do assimilate SSS bias-correct the satellite SSS data to normalize towards the near-surface Argo data. However, in rainy regions, where buoyant water sits as a fresh lens at the surface, this assumption is likely inadequate. In previous work, we have shown that adjusting SSS data to bulk salinity (Sb) using the Rain Impact Model (RIM) of Santos-Garcia et al., 2014 has improved the near-surface density and mixed layer depth, leading to deeper thermocline and improved the NINO3.4 SST forecasts. Now we utilize the Soil Moisture/Ocean Salinity, Rain Corrected (SMOS_RC) SSS product provided by the Centre Aval de Traitement des données SMOS (CATDS CPDC) to represent the Sb more accurately at first model layer (in our case 5 m). Rather than using a diffusivity model as with RIM, SMOS_RC relies on an observed relationship between the spatial heterogeneity of SMOS SSS and instantaneous rain rate (RR) (Supply et al., 2020). In order to test the impact of SMOS_RC versus SMOS, we compare two reanalyses over the period 2014 to 2021. For both reanalysis experiments, all available along-track absolute dynamic topography and in situ observations are assimilated using the LETKF scheme (Penny et al., 2013). One reanalysis additionally assimilates SMOS SSS data as is (i.e., with the fresh bias), and a separate reanalysis is performed assimilating the SMOS_RC data. We assess the impact for near-surface and subsurface dynamics within ocean reanalyses by validating against observations and explore how SSS assimilation (SMOS versus SMOS_RC) impacts dynamical ENSO forecasts using the NASA GMAO Sub-seasonal to Seasonal coupled forecast system (GEOS S2S-3, Molod et al., 2020, Hackert et al., 2023). We will show that improved SSS estimates and near-surface density and mixing led to more accurate coupled air/sea interaction and better ENSO forecasts.

Eric Hackert↗
NASA NTRSDate not supplied

Microbial Pigments and Their Degradation Products as Biosignatures

Carotenoids are a class of vibrant biological pigments that have a characteristic chemical structure centered around a polyene core (Lu et al. 2018). Carotenoids and their derivatives are candidate biosignatures because they can persist in the terrestrial geologic record for up to 1.73 billion years (Vinnichenko et al. 2020), have specific structures that are likely the result of complex pathways, mediate the survival of many microorganisms in Mars and Ocean Worlds analog environments, and are detectable with multiple techniques, including Raman spectroscopy. In this project, we aim to investigate the detectability of carotenoid pigments with different spectroscopic methods to inform future instrument selection. We compare the spectra of five unaltered carotenoids, two model compounds, and carotenoid-forming archaeon with visible and deep UV Raman spectroscopy and UVVis absorption spectrophotometry. We then use one model pigment, beta-carotene, to evaluate the likelihood that unique spectral properties of carotenoids, or their refractory byproducts, would be preserved and detectable on a remote planetary surface by exposing it to simulated conditions for Mars. Sample Acquisition. Pigments betacarotene, lutein, zeaxanthin, astaxanthin, and lycopene were purchased from Sigma Aldrich. Halobacterium salinarum NRC-1 was acquired from Carlina Biological and grown in Halobacterium media. Mineral salts including sodium sulfate, sodium carbonate, and halite were used to form matrices in which the beta-carotene was embedded before exposure. Pigment-mineral mixes were at a 1:10 ratio in water. Analytical Techniques. Deep UV Raman data were collected on a custom laboratory mapping spectrometer called MOBIUS (Mineral and Organic Based Investigations using Ultraviolet Spectroscopy), which is an analog to the SHERLOC instrument on the Mars 2020 Perseverance rover (Bhartia et al. 2021). It features a 248.56 nm NeCu pulsed laser, liquid nitrogen-cooled detector, and tunable optical setup. Visible Raman data were collected using a Horiba Jobin Yvon LabRam HR spectrometer with a frequencydoubled Nd:YAG laser (532 nm) and a HeNe laser (633 nm). A VWR 6300 PC UV/Visible Spectrophotometer was used to collect absorption data for carotenoid solutions, model compounds, and solvents in UVpermissible capped cuvettes. Data were collected from 190-1100 nm at 1 nm increments. All spectral data were analyzed using Igor Pro 9 (Wavemetrics). Irradiation. We used a vacuum chamber equipped with a cryostat and a flood electron gun to simulate Martian surface temperatures, low pressures, and ionizing radiation (10keV, 10μA for 6h at 200K for our initial tests). The samples were prepared by drying the pigment-mineral mix onto polished metal tabs, then mounted on the cryostat for processing. Samples were then analyzed directly on the tabs after exposure. Results: In comparing the visible and deep UV Raman spectra of unaltered pigments, we found that they differed drastically. Carotenoids are often studied with visible Raman and typically have peaks at 1525 cm-1 and 1157 cm-1, due to the stretching of the C=C and C-C bonds in the polyene structure. However, in deep UV, the strongest feature is at ~1630 cm-1 and is broad, possibly indicating that multiple peaks are forming this feature. This stark difference is likely due to different preresonant enhancement effects. The UV-Vis results show that there is an absorption band in the deep UV <300 nm, which supports the hypothesis that the 248.6 nm excitation is interrogating another aspect of carotenoids than visible Raman. Our preliminary exposure tests indicated that pigments – even without minerals present - were largely unaltered in the applied conditions, with only a slight broadening in the primary polyene peaks apparent in the visible Raman data. Figure 1. A) Visible vs. deep UV Raman spectra of unaltered beta carotene. B) Schematic of exposure. Conclusions: Our results to date indicate that deep UV and visible Raman spectroscopy, both techniques with planetary mission heritage from Mars 2020 (Wiens et al. 2021, Bhartia et al. 2021), may be used in a complementary manner to observe carotenoids. In addition, we find that beta-carotene is largely resistant to our current exposure conditions, though there may be some amount of amorphization of the material which could cause the broadening of the peaks at 1525 and 1157 cm-1. As a next step, we aim to increase the dosage and duration of exposure to observe degradation of the parent pigment, possibly add UV as a factor via an Ar mini-arc UV lamp and use GC-MS to characterize possible degradation products.

pigments↗
NASA NTRSDate not supplied

Tropical Tropospheric Ozone Trends (1990 to 2022): A Re-evaluation Based on SHADOZ and IAGOS Profiles and TOMS/OMI Columns

Changes in tropical tropospheric ozone (TTO) are of importance because this region spans roughly a third of the Earth and portions of it are experiencing variability in trends of ozone precursors (CO, NO x , CH 4 and nonmethane hydrocarbons) associated with economic growth and fires. In addition to ozone changes affecting radiative forcing, tropical ozone is an important source of the OH radical and thus, the oxidizing capacity of the planet (Thompson, 1992). Recent studies examining TTO trends satellite and in-situ observations over the past ~25 years include: Thompson et al., JGR, 2021; Gaudel et al., ACP, 2023; Stauffer et al., ACP, 2023. The results show considerable regional and seasonal variability in TTO trends and sensitivity to data selection, frequency, and statistical method used. The satellite data vary most widely in method, time period and reliability. Here we revisit trends for the 1990-2022 period with the best-characterized buv-based satellite products that span that period (derived from TOMS and OMI, Ziemke et al., 2019). The satellite-based trends are compared to trends based on in-situ data from the Southern Hemisphere Additional Ozonesondes (SHADOZ) network (1998-2022), measurements from selected pre-SHADOZ and IAGOS commercial aircraft data (Gaudel et al., 2023). Among sensitivities examined are the dependence of ozone trends on start and end years, impacts of ENSO events and the COVID-19 perturbation to emissions. Two statistical methods are used, quantile regression (QR) and multiple linear regression (MLR). Trends of total TTO, ozone segments in the boundary layer (to ~700 hPa), and free troposphere (700-300 hPa) are compared.

ozone, OMI, tropospheric ozone, SHADOZ↗
NASA NTRSDate not supplied

Comparing and Automatically Optimizing the Performance of Systematic Error Correctors for TESS Light Curves

Accurate and precise removal of systematic errors from TESS light curves (lcs) is critical for exoplanet, stellar, and asteroseismology studies•Various approaches exist to correct for systematics while preserving intrinsic stellar variability (Luger et al. 2016, 2018; Hedges et al. 2021; Smith et al. 2012; Stumpe et al. 2014; Aigrain et al. 2017)•However, no comprehensive analyseshave been carried out to properly compare these approaches and determine their validity on different target types in both an individual and statistical manner•Current correctors have been usually demonstrated on their own and on limited sets of hand-picked targets•To apply these corrections more generally, it is important to compare multiple correctors on larger samples•We are particularly interested in the ability to remove scattered light contaminationfrom the Earth and the Moon, which is a key systematic for TESS

David Rapetti↗
NASA NTRSDate not supplied

Satellite-Assisted Particulate Matter (SAPM) for the Models, In situ, and Remote Sensing of Aerosols (MIRA) Working Group

Models, In situ, and Remote sensing of Aerosols (MIRA) is an international working group that provides a forum for collaborations amongst these three atmospheric aerosol communities. MIRA consists of a collection of interdisciplinary and independently funded Topic/Project groups with clear goals and generally characterized by requests for additional scientific data. The Satellite-Assisted Particulate Matter (SAPM) Topic group focuses on the study of fine particulate matter (PM2.5), as it is a major contributor to air pollution and negatively impacts human health. Our group aims to provide intercomparisons of various methods and techniques for estimating surface PM2.5 assisted by satellite remote sensors (passive and active), global aerosol models, and in situ aerosol measurements. The overall motivation of our work is to enhance PM2.5 coverage beyond in situ ground stations, which can be limited. In this presentation, we provide an overview of various PM2.5 estimation approaches by current SAPM team members, as each approach has its own strengths and limitations. One approach uses near-surface aerosol extinction retrievals from the spaceborne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and an assumed value of mass extinction efficiency to derive PM2.5 concentrations (Toth et al 2019). A study using this method found a promising agreement (R=0.60; slope=0.89) with U.S. Environmental Protection Agency (EPA) in situ PM2.5 measurements over the contiguous United States (CONUS) for a 12-year (2007-2018) period (Toth et al 2022). In a different approach combining spaceborne lidar and a model, the Cloud Aerosol Transport System (CATS) lidar and Goddard Earth Observing System (GEOS) model are blended in an ensemble variational assimilation scheme to retrieve aerosol extinction and convert speciated mass concentrations to total PM2.5. A recent study (Matus et al in prep.) found agreement within 2 μg/m3 over the CONUS on the 2016 annual mean when compared to EPA ground-based measurements. Another study explored trends in city aerosol optical depth (AOD) from a spaceborne passive remote sensor, Moderate Resolution Imaging Spectroradiometer (MODIS), and found that these trends agree well with trends in city surface PM2.5, which provides confidence in the use of city AOD for city PM2.5 trend studies (Vohra et al 2021). In a follow-on study, steep and significant trends (~2.5 to 7.8% a-1) in AOD are found for several South Asian cities (e.g., Bangalore and Hyderabad), suggesting rapid growth in PM2.5 (Vohra et al 2022). Also in this presentation, we report results on our current collective SAPM study of India, a country that exhibits high levels of PM2.5 pollution. We show the temporal (i.e., seasonal) and spatial variability of PM2.5 over India using the CALIOP and CATS+model approaches, comparisons between the estimated PM2.5 from the retrieval schemes, and validation with in situ PM2.5 ground-based observations from the Central Pollution Control Board in India. This region provides us with an excellent case study to test our PM2.5 retrievals in heavily polluted scenes and over a complex and varying topography. The SAPM Topic group actively seeks international participants/collaborators in our group, including those working with in situ aerosol measurements (e.g., ACTRIS). We are interested in aerosol datasets in order to either improve our PM2.5 estimates from various approaches (e.g., using in situ mass scattering/absorption coefficient and aerosol hygroscopic properties for various aerosol species) and/or validate the PM2.5 estimates (e.g., using in situ ground-based PM2.5 concentrations).

Travis D Toth↗
NASA NTRSDate not supplied

Investigating Si Bonding Environments in Mercurian Melts

Mercury’s low oxygen fugacity results in lavas with extraordinarily high sulfur contents (> 1 wt%). The high S lowers melt viscosity, but why this occurs is unclear (Mouser et al., 2021). The detection of Si-S bonds (using NMR) in such highly reduced basaltic glasses, suggest that the decreased viscosity is due to changes in the Si bonding environment (Pommier et al., 2023). To investigate further, we synthesized a series of Mercurian glasses at 1 GPa, with S contents ranging from 0-6 wt% and oxygen fugacities from IW-4 to IW-6. The experimental glasses were analyzed by Si K-edge X-ray Absorption Near Edge Structure (XANES) spectroscopy and 29Si Nuclear Magnetic Resonance (NMR). Ongoing analyses will include Raman and Fourier Transform Infrared (FTIR). The 29Si NMR analyses suggest the presence of Si-S bonds in the melts, in agreement with Pommier et al. (2023). The Si K-edge XANES spectra show a decrease in K-edge position of 0.4 to 0.6 eV from terrestrial basalts (at ~IW+3) to the experimental melts at IW-4 to IW-6. This shift suggests a moderate (<20 mole %) amount of Si has shifted to lower valence states (Boujibar et al, 2019). The melts contain 0-6 wt% S, so if the K-edge shifts are the results of Si-S bonding, it implies that the majority of the S in the melts is bonded to Si. However, S K-edge XANES analyses indicate that much of the S is also bonded with Mg and Ca at these low oxygen fugacities (Anzures et al, 2020). The implication is that non-bridging Si-S-(Mg,Ca) bonds are prevalent in the reduced melts, consistent with the decrease in viscosity of the melts being due to melt depolymerization. Overall, our results suggest that dissolution of S into the melts at low fO2 is accomplished through bonding with Si, and is accompanied by significant structural changes that lower melt viscosity. Lower melt viscosities will affect many aspects of Mercury’s evolution, from magma ocean dynamics, to melt migration in the mantle, to eruption dynamics and degassing.

Emily L Fischer↗
NASA NTRSDate not supplied

Phosphate Textural Diversity in CI Chondrites and C-Type Asteroids

Introduction: Apatite, Ca 5 (PO 4 ) 3 (CL/F/OH-), is a ubiquitous phosphate found throughout the solar system, including the most primitive solids, CI-chondrites [1,2] and related samples of carbonaceous asteroids Ryugu [3] and Bennu [4], returned by JAXA’s Hayabusa2 and NASA’s OSIRIS-REx missions, respectively. Apatite in these primitive solids is found as individual grains or mineral clusters and has been inferred to form from the hydrothermal sequence during cooling of their respective parent body or bodies. To better understand the formation history and reworking of these early phosphates we have undertaken a highly coordinated study of phosphate microstructures, geochemistry and U/Pb geochronology from a suite of CI meteorites and carbonaceous asteroid samples. These data have identified novel phosphate microstructures and complex relationships across a suite of apatite grains from the early solar system, indicating multiple episodes of growth and modification on the CI parent body(ies). Methods: Samples of CI chondrites, Alais, Ivuna, Orgueil, Oued Chebeika 002, Yamato (Y) 82162, Y980115, Y980134, and two chips of Hayabusa2 Ryugu particles (A0262 and C0263) have been acquired for analysis. The bulk texture of the samples were first scanned by X-ray Computed Tomography (XCT) using the Nikon XT H 320 within the XFACT facility at NASA JSC or the Xradia 620 Versa at the UTCT facility. Based on the identification of petrofabrics or features of interest from the XCT data, samples were chipped, oriented, potted in epoxy and thick sections were prepared. After anhydrously polishing the samples with silicon carbide and dry diamond powder down to 1 µm, the samples were ion polished using a Hitachi ArBlade. Energy dispersive Xray spectrometry (EDS) maps were collected to ID phosphates of interest using a JEOL 7900F SEM. The internal microstructures of identified phosphates were then mapped by electron backscatter diffraction (EBSD) using the JEOL 7900F. Based on the EDS and EBSD data, domains of interest were targeted for quantitative chemical analyses using a JEOL 8530 EPMA. Subsequently, in situ U-Pb and 207 Pb/ 206 Pb ages will be collected using a Cameca ims1290 secondary ion mass spectrometer at UCLA across a range of microstructures. Results: Apatite grains are ubiquitous throughout the CI chondrites and carbonaceous asteroid materials, found as individual grains, disseminated clusters or grain aggregates. Apatite grains are associated with serpentine, magnet-ite, and/or carbonate. Of particular interest, we have identified individual and aggregate polycrystalline grains ex-hibiting an internal ‘honeycomb’ texture (Fig. 1). Some of these grains appear overprinted by subsequent alteration while others remain unaltered. Apatite halogen sites are dominated by the missing component, assumed to be OH, and F, comparable to published values from Bennu, Ryugu and CM-chondrites [3-5]. However, the Yamato CI-like meteorites show a broader range of Cl values, and one grain from Alais is dominated by CL. Summary: Apatite growth features indicate a protracted and complex growth history, consistent with precipitation from an evolving fluid system. The ‘honeycomb’ texture identified in some CI meteorites is, to the best of our knowledge, the first report of such a microstructure in meteoritic phosphate. The microtextures and zoning will guide subsequent age analyses, to better constrain the formation and reworking of phosphate in CI(-like) materials. Acknowledgments: We thank the National Institute of Polar Research, Japan for samples of Y82162, 980115 and 980134 meteorites, ASU’s Buseck Center for Meteorite Studies for samples of Ivuna and Alais meteorites, and JAXA curation for chips of Ryugu material. This work was funded by NASA ROSES LARS grant 24-LARS24-0014. References: [1] Morlok et al., 2016, GCA 70:5371-5394. [2] Alfin g et al., 2019, Geochemistry 79:125532. [3] Nakamura et al. (2022) Science 379:1-15. [4] Seifert et al. (2026) MAPS 61:504-521. [5] Piralla et al. (2021) MAPS 56:809-828.

CI chondrites↗
NASA NTRS1972

Stress corrosion of high strength aluminum alloys.

An investigation has been carried out to examine the relationship of the observed chemical and mechanical properties of Al-Cu and Al-Zn-Mg alloys to the stress corrosion mechanisms which dominate in each case. Two high purity alloys and analogous commercial alloys were selected. Fundamental differences between the behavior of Al-Cu and of Al-Zn-Mg alloys were observed. These differences in the corrosion behavior of the two types of alloys are augmented by substantial differences in their mechanical behavior. The relative cleavage energy of the grain boundaries is of particular importance.

Cocks, F. H.↗
NASA NTRS1972

Reliability improvement of wire bonds subjected to fatigue stresses.

The failure of wire bonds due to repeated flexure when semiconductor devices are operated in an on-off mode has been investigated. An accelerated fatigue testing apparatus was constructed and the major fatigue variables, aluminum alloy composition, and bonding mechanism, were tested. The data showed Al-1% Mg wires to exhibit superior fatigue characteristics compared to Al-1% Cu or Al-1% Si and ultrasonic bonding to be better than thermocompression bonding for fatigue resistance. Based on these results highly reliable devices were fabricated using Al-1% Mg wire with ultrasonic bonding which withstood 120,000 power cycles with no failures.

Ravi, K. V.↗
NASA NTRS1972

Cosmogeneic radionuclides in the Havero meteorite.

An 87-gram sample of the Havero ureilite has been analyzed by nondestructive gamma-ray spectrometry. The results of the measurements, in dpm/kg at time of fall, are: Na-22, 71 plus or minus 3; Al-26, 43 plus or minus 3; Sc-46, 3.4 plus or minus 2.1; Mn-54, 35 plus or minus 6; Co-60, less than or equal to 0.7, 2 sigma limit. Havero has 77 plus or minus 14% of the Al-26 activity calculated for its chemical composition. When averaged with previously reported analyses of Goalpara and Novo Urei, ureilites as a class have 74 plus or minus 7% of their expected Al-26 activity. The depletion in Al-26 could be the coincidental result of identical 'shielding' effects in three meteorites of apparently very different preatmospheric sizes. Alternatively, ureilites may have been exposed to a lower cosmic-ray flux than that experienced by most chondrites, probably the result of characteristically different orbits.

Cressy, P. J., Jr.↗
NASA NTRS1973

Elemental composition of individual chondrules from ordinary chondrites.

Sequential nondestructive neutron activation analysis was used to determine the bulk abundance of Fe, Al, Na, Mn, Cr, Sc, Co, and Ir in approximately 300 individual chondrules from 16 chondrites representing the H(3-5), L4, and LL(3-6) compositional and petrologic classes. The histograms indicate that the most probable abundances for lithophilic elements, except Cr, are enriched in the chondrules, while the siderophilic elements are depleted in the chondrules compared to the whole chondrite. Some of the abundance populations, such as Al and Fe, appear to be multimodal. Systematic variations in the composition of the chondrules with increasing petrologic type were observed; most consistent are an increasing Na-Al and Cr-Al correlation, a decreasing Na-Mn correlation, increasing Na abundance, and decreasing Na and Mn dispersions among chondrules.

Osborn, T. W.↗
NASA NTRS1974

Elemental abundances in meteoritic and terrestrial matter

Major and trace element analyses of over 180 individual chondrules from 12 carbonaceous chondrites are reported, including individual analyses of 60 chondrules from Pueblito de Allende. Siderophile elements in most chondrules are depleted, compared to the whole chondrite. Correlations of Al-Ir and Ir-Sc among chondrules high in Ca and Al were observed. A Cu-Mn correlation was also found for chondrules from some meteorites. No correlation was observed between Au and other siderophile elements (Fe, Ni, Co and Ir). It is suggested that these elemental associations were present in the material from which the chondrules formed. Compositionally, chondrules appear to be a multicomponent mixture of remelted dust. One component displaying an Al-Ir correlation is identified as Allende-type white aggregates. The other components are a material chemically similar to the present matrix and sulfides-plus-metal material. Abundances of the REE (rare earth elements) were measured in ordinary Allende chondrules and were 50% higher than REE abundances in Mokoia chondrules; REE abundances in Ca-Al rich chondrules were similar to REE abundances in Ca-rich white aggregates.

Schmitt, R. A.↗
NASA NTRS1975

Thermal expansion in the nickel-chromium-aluminum and cobalt-chromium-aluminum systems to 1200 degrees C

Thermal expansion data were obtained on 12 Ni-Cr-Al and 9 Co-Cr-Al alloys by high temperature X-ray diffraction. The data were computer fit to an empirical thermal expansion equation developed in the study. It is shown that the fit is excellent to good, and that the expansion constants depend on phase but not on composition. Phases for the Ni-Cr-Al system and Co-Cr-Al system are given. Results indicate that only alpha Cr has an expansion constant low enough to minimize oxide spalling or coating cracking induced by thermal expansion mismatch.

Lowell, C. E.↗
NASA NTRS1976

Cosmogenic radionuclides in stone meteorites

This document presents the techniques and compilation of results of cosmogenic Al-26 measurements at Goddard Space Flight Center on 91 samples of 76 stone meteorites. Short-lived radionuclides, including Na-22, Sc-46, Mn-54, and Co-60, were measured in 13 of these meteorites. About one-third of these data has not previously been published. The results are discussed briefly in terms of (1) depletion of Al-26 and natural potassium due to weathering, (2) possible exposure of several chondrites to an unusually high cosmic-ray flux, (3) comparison of Al-26, Na-22, Sc-46, and Mn5-54 in chondrites with the spallation Ne-22/Ne-21 ratio as a shielding indicator, and (4) comparison of (Al-26)-(Ne-22)/Ne-21 data for achondrite classes with the chondrite trend.

Cressy, P. J., Jr.↗