Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave shaping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Footprints of the QCD Crossover on Cosmological Gravitational Waves at Pulsar Timing Arrays

Pulsar timing arrays (PTAs) have reported evidence for a stochastic gravitational wave (GW) background at nanohertz frequencies, possibly originating in the early Universe. We show that the spectral shape of the low-frequency (causality) tail of GW signals sourced at temperatures around T ≳ 1 GeV is distinctively affected by confinement of strong interactions (QCD), due to the corresponding sharp decrease in the number of relativistic species, and significantly deviates from ∼ f 3 commonly adopted in the literature. Bayesian analyses in the NANOGrav 15 years and the previous international PTA datasets reveal a significant improvement in the fit with respect to cubic power-law spectra, previously employed for the causality tail. While no conclusion on the nature of the signal can be drawn at the moment, our results show that the inclusion of standard model effects on cosmological GWs can have a decisive impact on model selection. Published by the American Physical Society 2024

Franciolini, Gabriele (ORCID:0000000268929145)↗

Characterization of ablator dynamics initiated by picket-pulse conditions

Direct-drive laser-fusion targets may include low-cost plastic ablator material. Here, this work describes a tabletop experimental system designed to enable the investigation of the interaction of such ablator material as a function of the laser wavelength and the associated excitation mechanism. This experimental system offers time-resolved imaging of the material response with subpicosecond temporal resolution and ≈1-μm spatial resolution. The system involves synchronized femtosecond and picosecond lasers to initiate and characterize the dynamics of polystyrene planar targets irradiated by conditions similar to a “picket” prepulse from a direct-drive pulse shape. Ultrafast imaging of the initial excitation process followed by the resulting critical plasma formation, shock-wave propagation, and blowoff plasma expansion is used to compare the impact of excitation wavelength, 355 nm or 266 nm, on the ensuing dynamics. This work aims to investigate fundamental laser material interactions to help advance physics models that can inform the development of laser driver and target designs.

42 ENGINEERING↗

Quasiparticle interference of the Fermi arcs and surface-bulk connectivity of a Weyl semimetal

Weyl semimetals host topologically protected surface states, with arced Fermi surface contours that are predicted to propagate through the bulk when their momentum matches that of the surface projections of the bulk’s Weyl nodes. We used spectroscopic mapping with a scanning tunneling microscope to visualize quasiparticle scattering and interference at the surface of the Weyl semimetal TaAs. Our measurements reveal 10 different scattering wave vectors, which can be understood and precisely reproduced with a theory that takes into account the shape, spin texture, and momentum-dependent propagation of the Fermi arc surface states into the bulk. Furthermore, our findings provide evidence that Weyl nodes act as sinks for electron transport on the surface of these materials.

36 MATERIALS SCIENCE↗

The Observability of Vortex-driven Spiral Arms in Protoplanetary Disks: Basic Spiral Properties

Some circumstellar disks are observed to show prominent spiral arms in infrared scattered light or (sub-)millimeter dust continuum. The spirals might be formed from self-gravity, shadows, or planet–disk interactions. Recently, it was hypothesized that massive vortices can drive spiral arms in protoplanetary disks in a way analogous to planets. In this paper, we study the basic properties of vortex-driven spirals by the Rossby Wave Instability in 2D hydrodynamics simulations. We study how the surface density contrast, the number, and the shape of vortex-driven spirals depend on the properties of the vortex. We also compare vortex-driven spirals with those induced by planets. The surface density contrast of vortex-driven spirals in our simulations are comparable to those driven by a sub-thermal mass planet, typically a few to a few tens of Earth masses. In addition, different from the latter, the former is not sensitive to the mass of the vortex. Vortex-driven spiral arms are not expected to be detectable in current scattered light observations, and the prominent spirals observed in scattered light in a few protoplanetary disks, such as SAO 206462 (HD 135344B), MWC 758, and LkHα 330, are unlikely to be induced by the candidate vortices in them.

79 ASTRONOMY AND ASTROPHYSICS↗

The propagation of plane waves and higher order acoustic modes in multisectioned ducts

A theoretical and experimental study of acoustic propagation in an anechoically terminated multisectioned duct was performed. A unique source array consisting of two concentric rings of sources, providing phase and amplitude control in the radial as well as circumferential direction, was developed to generate plane waves and both spinning and non-spinning higher order modes. Measurement of attenuation and radial mode shapes were taken with various finite length liners inserted between the hard wall sections of a duct with an anechoic termination. A search technique was developed to find the complex eigenvalues for a liner under the assumption of a locally reacting boundary condition. The experimental results were compared with a theoretical analysis which includes the modal transmission and reflection at the interface of each duct section, and this indicated that the local reaction boundary condition is valid for three liner configurations.

Wyerman, B. R.↗

Ultrasonic attenuation of a void-containing medium for very long wavelengths

Ultrasonic longitudinal through-thickness attenuation in an isotropic medium due to scattering by randomly distributed voids is considered analytically. The attenuation is evaluated on the assumption of no interaction between voids. The scattered power is assumed to be entirely lost, thus accounting for the ultrasonic attenuation. The scattered power due to the presence of a void is described in terms of the scattering cross section of the void. An exact solution exists for the scattering cross section of a spherical void. An approximate solution for the scattering cross section of an ellipsoidal void is developed based on the so-called Born approximation commonly used in quantum mechanics. This approximate solution is valid for k sub p a sub i 1, where k sub p is the wave number of the incident longitudinal wave and a sub i is the largest dimension of the void. It is found that the shape of the void has negligible effect on the scattering cross section and that only the volume of the void is important. Thus, it is noted that in cases where k sup p a sub i 1, the exact scattering cross section of a spherical void having the same volume as an arbitrarily shaped void can be used for evaluating ultrasonic attenuation.

Williams, J. H., Jr.↗

A theoretical model study of observed correlations between whistler mode waves and energetic electron precipitation events in the magnetosphere

A recently extended test particle computer model of the gyroresonance wave-particle interaction in the magnetosphere is applied to previously reported cases of observed correlations between whistler mode waves and ionospheric responses to particle precipitation. Three different ionospheric effects, namely, X-ray bursts, photoemissions, and D region perturbations, all correlated with VLF waves and believed to be caused by precipitated particles, are considered. The precipitation flux level, the pulse shape, and the associated time delays are computed for the parameters relevant to each case and are compared with values deduced from the data. The results demonstrate that the existing theoretical model can be useful for interpreting experimental results of this kind. Furthermore, the model results and observations, used together, provide a basis for additional diagnostics of the various parameters of the cold and energetic particle distributions in the magnetosphere. For example, when applied to the observed photoemission case (Helliwell et al., 1980) the model results imply that the trapped energetic particle distribution function at the time could be modeled as proportional to E exp -n/2 with n about 3.5 to 6, where E is the particle energy.

Chang, H. C.↗

Ultrasonic attenuation of a void-containing medium for very long wavelengths

Ultrasonic longitudinal through-thickness attenuation in an isotropic medium due to scattering by randomly distributed voids is considered analytically. The attenuation is evaluated on the assumption of no interaction between voids. The scattered power is assumed to be entirely lost, thus accounting for the ultrasonic attenuation. The scattered power due to the presence of a void is described in terms of the scattering cross section of the void. An exact solution exists for the scattering cross section of a spherical void. An approximate solution for the scattering cross section of an ellipsoidal void is developed based on the so-called Born approximation commonly used in quantum mechanics. This approximate solution is valid for k sub p a sub i much less than 1, where k sub p is the wave number of the incident longitudinal wave and a sub i is the largest dimension of the void. It is found that the shape of the void has negligible effect on the scattering cross section and that only the volume of the void is important. Thus, it is noted that in cases where k sub p a sub i is much less than 1, the exact scattering cross section of a spherical void having the same volume as an arbitrarily shaped void can be used for evaluating ultrasonic attenuation. Previously announced in STAR as N83-28466

Williams, J. H., Jr.↗

Progression-regression effects in tracking repeated patterns

Subjects used a position control system to perform compensatory tracking of a repeated input pattern. The input pattern was 20 seconds in duration and was either an arctangent function or the sum of two sine waves. Tracking error decreased with practice and increased with the addition of a concurrent memory task. The shape of the ensemble-average tracking error resembled the shape of the input velocity signal throughout these changes in performance. Regression analyses were used to parameterize these effects and compare these results with the predictions of several conceptualizations of perceptual-motor learning.

Jagacinski, R. J.↗

Spiky parallel dc electric fields in the aurora

A series of computer simulations is reported on the detailed shape and distribution of the dc electric fields that result when an external potential drop is applied to a plasma with strong low-frequency turbulence. The structures are shown to depend on the size of the potential drop and upon the shape of the ion turbulence. For the type of turbulence expected for current driven electrostatic ion cyclotrron waves the dc fields seen in the simulations are in good agreement with those observed in the aurora.

Rowland, H. L.↗

Transfer impedance measurements of the space shuttle Solid Rocket Motor (SRM) joints, wire meshes and a carbon graphite motor case

Using three different current injection methods and a simple voltage probe, transfer impedances for Solid Rocket Motor (SRM) joints, wire meshes, aluminum foil, Thorstrand and a graphite composite motor case were measured. In all cases, the surface current distribution for the particular current injection device was calculated analytically or by finite difference methods. The results of these calculations were used to generate a geometric factor which was the ratio of total injected current to surface current density. The results were validated in several ways. For wire mesh measurements, results showed good agreement with calculated results for a 14 by 18 Al screen. SRM joint impedances were independently verified. The filiment wound case measurement results were validated only to the extent that their curve shape agrees with the expected form of transfer impedance for a homogeneous slab excited by a plane wave source.

Papazian, Peter B.↗

Extraordinary mode resonance cones in the Uranian magnetosphere?

This paper considers the previously unidentified waveforms in the Uranian magnetosphere, involving decreasing frequency with time, which were recorded during the Voyager-2 flyby of Uranus. Applying to these waveforms the basic theory of the resonance cone emission in the X mode for a homogeneous plasma, it is shown that the observed waveforms and their features can be created by bands of X-mode waves on the resonance cone. It is demonstrated that the theory can produce simultaneously the arching downward shape of the waveform and the decreasing frequency of the periodic modulation.

Grabbe, Crockett L.↗

Analytical prediction of EM scattering by complex obstacles within electrically large open cavities

An analytical technique is described for predicting the electromagnetic (EM) scattering by complex obstacles within electrically large open waveguide cavities. This topic is of relevance to EM scattering and EMC type applications. A general open ended waveguide cavity is illustrated and is assumed to be relatively arbitrarily shaped, and the open front end of the cavity is illuminated by an arbitrarily polarized external plane wave field. The interior obstacle is assumed to be located within the cavity near the back end, and it generally contributes significantly to the fields scattered into the exterior by the entire cavity configuration. The present scattering analysis is restricted to within approximately 70 degs from boresight with respect to the open front end; outside of this region, the scattering by the external features of the cavity are generally more significant than from the interior of the cavity. The scattering analysis is composed of two main parts. One analysis is of the coupling of the incident plane wave field, via the open front end using the high frequency ray or beam shooting methods. The other analysis deals with separately obtaining the plane wave scattering characteristics of the interior obstacle. Thus the present analysis represents a hybrid combination of an asymptotic high frequency ray/beam method for tracking the fields through the cavity, together with any suitable method for obtaining a plane wave characterization of the interior obstacle.

Pathak, Prabhakar H.↗

Mobility power flow analysis of coupled plate structure subjected to mechanical and acoustic excitation

The mobility power flow approach that was previously applied in the derivation of expressions for the vibrational power flow between coupled plate substructures forming an L configuration and subjected to mechanical loading is generalized. Using the generalized expressions, both point and distributed mechanical loads on one or both of the plates can be considered. The generalized approach is extended to deal with acoustic excitation of one of the plate substructures. In this case, the forces (acoustic pressures) acting on the structure are dependent on the response of the structure because of the scattered pressure component. The interaction between the plate structure and the acoustic fluid leads to the derivation of a corrected mode shape for the plates' normal surface velocity and also for the structure mobility functions. The determination of the scattered pressure components in the expressions for the power flow represents an additional component in the power flow balance for the source plate and the receiver plate. This component represents the radiated acoustical power from the plate structure. For a number of coupled plate substrates, the acoustic pressure generated by one substructure will interact with the motion of another substructure. That is, in the case of the L-shaped plate, acoustic interaction exists between the two plate substructures due to the generation of the acoustic waves by each of the substructures. An approach to deal with this phenomena is described.

Cuschieri, J. M.↗

Quality Control and Calibration of the Dual-Polarization Radar at Kwajalein, RMI

Weather radars, recording information about precipitation around the globe, will soon be significantly upgraded. Most of today s weather radars transmit and receive microwave energy with horizontal orientation only, but upgraded systems have the capability to send and receive both horizontally and vertically oriented waves. These enhanced "dual-polarimetric" (DP) radars peer into precipitation and provide information on the size, shape, phase (liquid / frozen), and concentration of the falling particles (termed hydrometeors). This information is valuable for improved rain rate estimates, and for providing data on the release and absorption of heat in the atmosphere from condensation and evaporation (phase changes). The heating profiles in the atmosphere influence global circulation, and are a vital component in studies of Earth s changing climate. However, to provide the most accurate interpretation of radar data, the radar must be properly calibrated and data must be quality controlled (cleaned) to remove non-precipitation artifacts; both of which are challenging tasks for today s weather radar. The DP capability maximizes performance of these procedures using properties of the observed precipitation. In a notable paper published in 2005, scientists from the Cooperative Institute for Mesoscale Meteorological Studies (CIMMS) at the University of Oklahoma developed a method to calibrate radars using statistically averaged DP measurements within light rain. An additional publication by one of the same scientists at the National Severe Storms Laboratory (NSSL) in Norman, Oklahoma introduced several techniques to perform quality control of radar data using DP measurements. Following their lead, the Topical Rainfall Measuring Mission (TRMM) Satellite Validation Office at NASA s Goddard Space Flight Center has fine-tuned these methods for specific application to the weather radar at Kwajalein Island in the Republic of the Marshall Islands, approximately 2100 miles southwest of Hawaii and 1400 miles east of Guam in the tropical North Pacific Ocean. This tropical oceanic location is important because the majority of rain, and therefore the majority of atmospheric heating, occurs in the tropics where limited ground-based radar data are available.

Marks, David A.↗

Composition Reanalyses at NASA’s Global Modeling and Assimilation Office

Scientific Assessments of Ozone Depletion 2018 and 2022 report the recovery of Antarctic ozone, consistent with diminishing concentrations of halogens in the stratosphere. Both the size and the depth of the springtime ozone holes exhibit downward trends, particularly in September. Superimposed on the recovery trend are significant year-to-year fluctuations arising from dynamical variability potentially influenced by climate forcing and volcanic eruptions. Since 2018 the Antarctic stratosphere has experienced a wild parade of austral spring seasons with a sudden stratospheric warming and exceptionally high ozone in 2019 followed by large and long-lasting ozone holes in the following years, prompting questions about the speed and detectability of Antarctic ozone recovery and its potential connections to human-induced climate change. From the Australian New Years’ wildfires of 2020 to volcanic aerosols to the unprecedented injection of water vapor by the Hunga volcanic eruption, recent scientific literature on the subject investigates many factors that may or may not have contributed to this remarkable interannual variability. This presentation summarizes dynamical influences on springtime Antarctic stratospheric ozone in recent years and discusses these results in the context of long-term trends. In particular, this work seeks to isolate dynamical and chemical contributions to the Antarctic springs since 2019 using a consistent methodological framework. Our analysis uses constituent and meteorological fields from the MERRA-2 Stratospheric Composition Reanalysis of Aura MLS (M2-SCREAM) in combination with data from the Atmospheric Chemistry Experiment – Fourier Transform Spectrometer and from ozone sondes. Using the high spatial and temporal resolution of M2-SCREAM, we analyze the daily evolution of southern polar ozone, HCl, N2O, and water vapor in dynamical flow-following coordinates relative to the location, size, and shape of the polar vortex. For vertically integrated stratospheric ozone we emphasize the importance of the wave-influenced geometry of the polar vortex and its vertical alignment. The ultimate purpose of this project is to contribute to the quantification of the speed of the Antarctic ozone recovery and associated uncertainties.

Krzysztof Wargan↗

Low-energy electron scattering from C{sub 4}H{sub 9}OH isomers

We present differential, integral, and momentum-transfer cross sections for elastic scattering of low-energy electrons by three butanol isomers, isobutanol, t-butanol, and 2-butanol. Our results were calculated with the Schwinger multichannel method in the static-exchange plus polarization approximation for collision energies from 1 to 50 eV. The present results are compared with previous calculations and measurements for the remaining C{sub 4}H{sub 9}OH isomer, n-butanol [Khakoo et al., Phys. Rev. A 78, 062714 (2008)]. Distinctive behavior is observed in the differential cross sections at collision energies between 5 and 10 eV. In particular, whereas n-butanol exhibits an f-wave scattering pattern, the other isomers exhibit d-wave behavior. A similar pattern is found in the related alkanes when comparing straight-chain versus branched isomers. We discuss the possible connection of this behavior to shape resonances that influence the scattering.

74 ATOMIC AND MOLECULAR PHYSICS↗

Determination of the Brunt-Vaisala frequency from vertical velocity spectra

Recent work on the spectra of vertical velocity oscillations due to gravity waves in the troposphere, stratosphere and the mesosphere has revealed a typical feature which we call the Brunt-Vaisala cutoff. Several observers noticed a spectral peak near the Brunt-Vaisala frequency. This peak often is characterized by a very steep slope at the high frequency part, but a fairly shallow slope towards lower frequencies. Some example spectra of stratosphere observations are given. This distinct spectral shape (most clear at the upper height 22.5 km) can be explained by the fact that the vertical velocity amplitudes of atmospheric gravity waves increase with frequency up to their natural cutoff at the Brunt-Vaisala frequency. The measurement of the frequency of the peak in a vertical velocity spectrum was found to yield most directly the Brunt-Vaisala-frequency profile. Knowing the Brunt-Vaisala frequency profile, one can deduce the potential temperature profile, if one has a calibration temperature at one height. However, even the uncalibrated profile will be quite useful, e.g., to determine fronts (defined by temperature inversions) and the tropopause height. This method fails for superadiabatic lapse rates when the Brunt-Viasala frequency is imaginary. The application of this method will also be difficult when the wind velocity is too high, causing the Doppler effect to smear out the total spectrum and blur the Brunt-Vaisala cutoff. A similar deficiency will also appear if the gravity-wave distribution has a maximum in wind direction.

Rottger, J.↗