Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variability prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Pool and flow boiling in variable and microgravity

As is well known, boiling is an effective mode of heat transfer in that high heat flux levels are possible with relatively small temperature differences. Its optimal application requires that the process be adequately understood. A measure of the understanding of any physical event lies in the ability to predict its behavior in terms of the relevant parameters. Despite many years of research the predictability of boiling is currently possible only for quite specialized circumstances, e.g., the critical heat flux and film boiling for the pool boiling case, and then only with special geometries. Variable gravity down to microgravity provides the opportunity to test this understanding, but possibly more important, by changing the dimensional and time scales involved permits more detailed observations of elements involved in the boiling process, and perhaps discloses phenomena heretofore unknown. The focus here is on nucleate boiling although, as will be demonstrated below, under but certain circumstances in microgravity it can take place concurrently with the dryout process. In the presence of earth gravity or forced convection effects, the latter process is usually referred to as film boiling. However, no vapor film as such forms with pool boiling in microgravity, only dryout. Initial results are presented here for pool boiling in microgravity, and were made possible at such an early date by the availability of the Get-Away-Specials (GAS). Also presented here are some results of ground testing of a flow loop for the study of low velocity boiling, eventually to take place also in microgravity. In the interim, variable buoyancy normal to the heater surface is achieved by rotation of the entire loop relative to earth gravity. Of course, this is at the expense of varying the buoyancy parallel to the heater surface. Two questions which must be resolved early in the study of flow boiling in microgravity are (1) the lower limits of liquid flow velocity where buoyancy effects become significant to the boiling process (2) the effect of lower liquid flow velocities on the Critical Heat Flux when buoyancy is removed. Results of initial efforts in these directions are presented, albeit restricted currently to the ever present earth gravity.

Merte, Herman, Jr.↗
NASA NTRS2020

Ag isotopic and chalcophile element evolution of the terrestrial and martian mantles during accretion: new constraints from Bi, Pd, and Ag metal-silicate partitioning.

The Earth’s timing of accretion and acquisition of moderately volatile compounds is uncertain. Hafnium-W and Mn-Cr isotopic data can bracket the timing of early planetary differentiation and core formation. The Ag-Pd system has also been utilized but its application has been limited by a lack of high pressure and temperature metal-silicate partitioning for Pd and Ag. Be-cause Ag (and Bi) are volatile chalcophile siderophile elements, understanding their early distribution can constrain the origin of volatile elements in differentiated bodies and planets. Unfortunately, neither Ag or Bi have been studied across the wide range of pressure and temperature conditions that are relevant to accretion and core-mantle differentiation. Here, new high-pressure and temperature multi-anvil metal-silicate equilibrium experiments for Bi and Ag have been carried out at conditions relevant to planetary accretion and metal silicate differentiation that allow a more refined and complete understanding of element partitioning during core formation. The new metal-silicate partitioning data utilized to predict the distributions of Bi, Pd, and Ag at conditions of accretion for Earth and Mars and show that the Pd/Ag ratio is significantly fractionated during accretion, allowing for the production of detectable 107Ag anomalies produced while 107Pd (half life = 6.5 M.y.) was still extant. Application of the new partitioning results to Earth shows that D(Bi) and D(Ag) (D = metal/silicate concentration ratio) are lowered due to the effect of pressure and Si alloyed in the metallic liquid, resulting in higher predicted mantle Bi and Ag abundances than in the bulk silicate Earth (BSE), as well as high and variable Pd/Ag. The unradiogenic Ag isotopic composition of the BSE could have been generated by early accretion of volatile-poor (high Pd/Ag) precursors, followed by later accretion of volatile–rich (low Pd/Ag) material, in agreement with earlier studies of Pd-Ag and Mn-Cr (Schönbächler et al., 2010). However, these main accretion phases would have to be followed by segregation of a sulfide liquid (at least 1.5% of magma ocean) at high pressures (>30 GPa), to explain the PUM Bi, Pd, and Ag, as well as Au, Pt, Cu and Ni concentrations as proposed previously. If the early accreted bulk Earth was volatile depleted with high Pd/Ag ratios, portions of the mantle may contain ancient domains that developed positive 107Ag isotopic anomalies (as also argued by noble gases, Nd, W, and Os isotopes). In comparison, Bi, Pd, and Ag concentrations in the martian mantle could have been set by simple metal-silicate equilibrium. Mars accreted and differentiated relatively rapidly, while also developing a deep magma ocean with a high Pd/Ag ratio that could have evolved positive 107Ag anomalies, in contrast to Earth. Measurements on shergottites may reveal these predicted Ag isotopic anomalies.

accretion↗
NASA NTRS1951

Aerodynamic characteristics of four bodies of revolution showing some effects of afterbody shape and fineness ratio at free-stream Mach numbers from 1.50 to 1.99

The effects of fineness ratio (14.2 and 12.2) and boattailing on aerodynamic characteristics of four bodies of revolution at Mach numbers from 1.50 to 1.99 within a range of angles of attack from 0 degrees 10 degrees at an approximate Reynolds number of 35x10(superscript)6 based on body length were investigated. A comparison of experimental data with available theory is included. At zero angle of attack, fineness ratio has no appreciable effect on model characteristics while boattailing and boattail convergence significantly affect fore drag and base drag. At angle of attack the effects are singular. The theory presented by H. J. Allen is a significant improvement over linearized potential theory in predicting aerodynamic characteristics.

BODIES - FITNESS RATIO↗
NASA NTRS1974

Study of stability of large maneuvers of airplanes

A predictive method of nonlinear system analysis is used to investigate airplane stability and dynamic response during rolling maneuvers. The maneuver roll-rate is not assumed to be constant, and the airplane motion is represented by a set of coupled nonlinear differential equations. The general rolling maneuver is kinematically specified by its roll-rate variation p(t). A method for relating the airplane dynamic response to p(t) is developed. The method provides analytical expressions for the motion variables in terms of the maneuver descriptor p(t). A parameterized family of rolling maneuvers is considered, for which the method is used to predict specific dynamic response information, such as the dependence of the peak angle-of-attack excursion on the maneuver parameters. The stability and motion of the airplane in response to an arbitrary actuation of aileron input is considered. Analytical expressions relating motion variables to aileron input are obtained. Explicit analytical bounds on the motion variables are derived. A stability criterion which guarantees nondivergence of motion in response to aileron actuation is presented.

Haddad, E. K.↗
NASA NTRS1994

Modeling time-dependent corrosion fatigue crack propagation in 7000 series aluminum alloys

Stress corrosion cracking and corrosion fatigue experiments were conducted with the susceptible S-L orientation of AA7075-T651, immersed in acidified and inhibited NaCl solution, to provide a basis for incorporating environmental effects into fatigue crack propagation life prediction codes such as NASA FLAGRO. This environment enhances da/dN by five to ten-fold compared to fatigue in moist air. Time-based crack growth rates from quasi-static load experiments are an order of magnitude too small for accurate linear superposition prediction of da/dN for loading frequencies above 0.001 Hz. Alternate methods of establishing da/dt, based on rising-load or ripple-load-enhanced crack tip strain rate, do not increase da/dt and do not improve linear superposition. Corrosion fatigue is characterized by two regimes of frequency dependence; da/dN is proportional to f(exp -1) below 0.001 Hz and to F(exp 0) to F(exp -0.1) for higher frequencies. Da/dN increases mildly both with increasing hold-time at K(sub max) and with increasing rise-time for a range of loading waveforms. The mild time-dependence is due to cycle-time-dependent corrosion fatigue growth. This behavior is identical for S-L nd L-T crack orientations. The frequency response of environmental fatigue in several 7000 series alloys is variable and depends on undefined compositional or microstructural variables. Speculative explanations are based on the effect of Mg on occluded crack chemistry and embritting hydrogen uptake, or on variable hydrogen diffusion in the crack tip process zone. Cracking in the 7075/NaCl system is adequately described for life prediction by linear superposition for prolonged load-cycle periods, and by a time-dependent upper bound relationship between da/dN and delta K for moderate loading times.

Mason, Mark E.↗
NASA NTRS2001

Controlling Malaria and Other Diseases Using Remote Sensing

Remote sensing offers the vantage of monitoring a vast area of the Earth continuously. Once developed and launched, a satellite gives years of service in collecting data from the land, the oceans, and the atmosphere. Since the 1980s, attempts have been made to relate disease occurrence with remotely sensed environmental and geophysical parameters, using data from Landsat, SPOT, AVHRR, and other satellites. With higher spatial resolution, the recent satellite sensors provide a new outlook for disease control. At sub-meter to I 10m resolution, surface types associated with disease carriers can be identified more accurately. The Ikonos panchromatic sensor with I m resolution, and the Advanced Land Imager with 1 Om resolution on the newly launched Earth Observing-1, both have displayed remarkable mapping capabilities. In addition, an entire array of geophysical parameters can now be measured or inferred from various satellites. Airborne remote sensing, with less concerns on instrument weight, size, and power consumption, also offers a low-cost alternative for regional applications. NASA/GSFC began to collaborate with the Mahidol University on malaria and filariasis control using remote sensing in late 2000. The objectives are: (1) To map the breeding sites for the major vector species; (2) To identify the potential sites for larvicide and insecticide applications; (3) To explore the linkage of vector population and transmission intensity to environmental variables; (4) To monitor the impact of climate change and human activities on vector population and transmission; and (5) To develop a predictive model for disease distribution. Field studies are being conducted in several provinces in Thailand. Data analyses will soon begin. Malaria data in South Korea are being used as surrogates for developing classification techniques. GIS has been shown to be invaluable in making the voluminous remote sensing data more readily understandable. It will be used throughout this study to clearly demonstrate the spatial relationship between the disease intensities, geophysical variables, and socioeconomic parameters. Asides from malaria and filariasis, application of remote sensing to the control of other diseases have been vigorously pursued by NASA's Environment and Health Initiative. The current program includes projects on Rift Valley fever, St. Louis encephalitis, dengue fever, ebola, African dust and diseases, meningitis, asthma, bartonellosis, cholera, and urban health concerns. Results from these projects indicate that remote sensing will play an increasingly important role in disease control in the future.

Kiang, Richard K.↗
NASA NTRS1990

Application of a Reynolds stress turbulence model to the compressible shear layer

Theoretically based turbulence models have had success in predicting many features of incompressible, free shear layers. However, attempts to extend these models to the high-speed, compressible shear layer have been less effective. In the present work, the compressible shear layer was studied with a second-order turbulence closure, which initially used only variable density extensions of incompressible models for the Reynolds stress transport equation and the dissipation rate transport equation. The quasi-incompressible closure was unsuccessful; the predicted effect of the convective Mach number on the shear layer growth rate was significantly smaller than that observed in experiments. Having thus confirmed that compressibility effects have to be explicitly considered, a new model for the compressible dissipation was introduced into the closure. This model is based on a low Mach number, asymptotic analysis of the Navier-Stokes equations, and on direct numerical simulation of compressible, isotropic turbulence. The use of the new model for the compressible dissipation led to good agreement of the computed growth rates with the experimental data. Both the computations and the experiments indicate a dramatic reduction in the growth rate when the convective Mach number is increased. Experimental data on the normalized maximum turbulence intensities and shear stress also show a reduction with increasing Mach number.

Sarkar, S.↗
NASA NTRS1990

Application of a Reynolds stress turbulence model to the compressible shear layer

Theoretically based turbulence models have had success in predicting many features of incompressible, free shear layers. However, attempts to extend these models to the high-speed, compressible shear layer have been less effective. In the present work, the compressible shear layer was studied with a second-order turbulence closure, which initially used only variable density extensions of incompressible models for the Reynolds stress transport equation and the dissipation rate transport equation. The quasi-incompressible closure was unsuccessful; the predicted effect of the convective Mach number on the shear layer growth rate was significantly smaller than that observed in experiments. Having thus confirmed that compressibility effects have to be explicitly considered, a new model for the compressible dissipation was introduced into the closure. This model is based on a low Mach number, asymptotic analysis of the Navier-Stokes equations, and on direct numerical simulation of compressible, isotropic turbulence. The use of the new model for the compressible dissipation led to good agreement of the computed growth rates with the experimental data. Both the computations and the experiments indicate a dramatic reduction in the growth rate when the convective Mach number is increased. Experimental data on the normalized maximum turbulence intensities and shear stress also show a reduction with increasing Mach number.

Sarkar, S.↗
NASA NTRS2008

Compressible Boundary Layer Predictions at High Reynolds Number using Hybrid LES/RANS Methods

Simulations of compressible boundary layer flow at three different Reynolds numbers (Re(sub delta) = 5.59x10(exp 4), 1.78x10(exp 5), and 1.58x10(exp 6) are performed using a hybrid large-eddy/Reynolds-averaged Navier-Stokes method. Variations in the recycling/rescaling method, the higher-order extension, the choice of primitive variables, the RANS/LES transition parameters, and the mesh resolution are considered in order to assess the model. The results indicate that the present model can provide good predictions of the mean flow properties and second-moment statistics of the boundary layers considered. Normalized Reynolds stresses in the outer layer are found to be independent of Reynolds number, similar to incompressible turbulent boundary layers.

Choi, Jung-Il↗
NASA NTRS2005

SABER Observations of the OH Meinel Airglow Variability Near the Mesopause

The Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument, one of four on board the TIMED satellite, observes the OH Meinel emission at 2.0 m that peaks near the mesopause. The emission results from reactions between members of the oxygen and hydrogen chemical families that can be significantly affected by mesopause dynamics. In this study we compare SABER measurements of OH Meinel emission rates and temperatures with predictions from a 3-dimensional chemical dynamical model. In general, the model is capable of reproducing both the observed diurnal and seasonal OH Meinel emission variability. The results indicate that the diurnal tide has a large effect on the overall magnitude and temporal variation of the emission in low latitudes. This tidal variability is so dominant that the seasonal cycle in the nighttime emission depends very strongly on the local time of the analysis. At higher latitudes, the emission has an annual cycle that is due mainly to transport of oxygen by the seasonally reversing mean circulation.

Marsh, Daniel R.↗
NASA NTRS1989

Predictions of Poisson's ratio in cross-ply laminates containing matrix cracks and delaminations

A damage-dependent constitutive model for laminated composites has been developed for the combined damage modes of matrix cracks and delaminations. The model is based on the concept of continuum damage mechanics and uses second-order tensor valued internal state variables to represent each mode of damage. The internal state variables are defined as the local volume average of the relative crack face displacements. Since the local volume for delaminations is specified at the laminate level, the constitutive model takes the form of laminate analysis equations modified by the internal state variables. Model implementation is demonstrated for the laminate engineering modulus E(x) and Poisson's ratio nu(xy) of quasi-isotropic and cross-ply laminates. The model predictions are in close agreement to experimental results obtained for graphite/epoxy laminates.

Harris, Charles E.↗
NASA NTRS1996

Comparison of the Performance of Noise Metrics as Predictions of the Annoyance of Stage 2 and Stage 3 Aircraft Overflights

Thirty audiometrically screened test participants judged the relative annoyance of two comparison (variable level) and thirty-four standard (fixed level) signals in an adaptive paired comparison psychoacoustic study. The signal ensemble included both FAR Part 36 Stage 2 and 3 aircraft overflights, as well as synthesized aircraft noise signatures and other non-aircraft signals. All test signals were presented for judgment as heard indoors, in the presence of continuous background noise, under free-field listening conditions in an anechoic chamber. Analyses of the performance of 30 noise metrics as predictors of these annoyance judgments confirmed that the more complex metrics were generally more accurate and precise predictors than the simpler methods. EPNL was somewhat less accurate and precise as a predictor of the annoyance judgments than a duration-adjusted variant of Zwicker's Loudness Level.

Pearsons, Karl S.↗
NASA NTRS2004

Cyclic Oxidation Modeling and Life Prediction

The cyclic oxidation process can be described as an iterative scale growth and spallation sequence by a number of similar models. Model input variable include oxide scale type and growth parameters, spalling geometry, spall constant, and cycle duration. Outputs include net weight change, the amounts of retained and spalled oxide, the total oxygen and metal consumed, and the terminal rates of weight loss and metal consumption. All models and their variations produce a number of similar characteristic features. In general, spalling and material consumption increase to a steady state rate, at which point the retained scale approaches a constant and the rate of weight loss becomes linear. For one model, this regularity was demonstrated as dimensionless, universal expressions, obtained by normalizing the variables by critical performance factors. These insights were enabled through the use of the COSP for Windows cyclic oxidation spalling program.

Smialek, James L.↗
NASA NTRS2018

The Impact of Satellite Sea Surface Salinity for Prediction of the Coupled Indo-Pacific System

Here we assess the impact of satellite sea surface salinity (SSS) observations on seasonal to interannual variability of tropical Indo-Pacific Ocean dynamics as well as on dynamical ENSO forecasts. The baseline experiment assimilates satellite sea level (SL), sea surface temperature (SST), and in situ subsurface temperature and salinity observations (Tz, Sz). These baseline experiments are then compared with experiments that additionally assimilate Aquarius (version 5.0 Lilly and Lagerloef, 2008) and SMAP (version 2.0 Meissner and Wentz, 2016) SSS. Twelve-month forecasts are initialized for each month from September 2011 to September 2017. We find that including satellite SSS significantly improves NINO3.4 sea surface temperature anomaly validation over 0-8 month forecast lead-times and removing the salty bias from SMAP data helps to extend useful forecasts out to 12 month lead-times.

SSS↗
NASA NTRS1991

Decision paths in complex tasks

Complex real world action and its prediction and control has escaped analysis by the classical methods of psychological research. The reason is that psychologists have no procedures to parse complex tasks into their constituents. Where such a division can be made, based say on expert judgment, there is no natural scale to measure the positive or negative values of the components. Even if we could assign numbers to task parts, we lack rules i.e., a theory, to combine them into a total task representation. We compare here two plausible theories for the amalgamation of the value of task components. Both of these theories require a numerical representation of motivation, for motivation is the primary variable that guides choice and action in well-learned tasks. We address this problem of motivational quantification and performance prediction by developing psychophysical scales of the desireability or aversiveness of task components based on utility scaling methods (Galanter 1990). We modify methods used originally to scale sensory magnitudes (Stevens and Galanter 1957), and that have been applied recently to the measure of task 'workload' by Gopher and Braune (1984). Our modification uses utility comparison scaling techniques which avoid the unnecessary assumptions made by Gopher and Braune. Formula for the utility of complex tasks based on the theoretical models are used to predict decision and choice of alternate paths to the same goal.

Galanter, Eugene↗
NASA NTRS2015

Jet Surface Interaction Scrubbing Noise from High Aspect-Ratio Rectangular Jets

Concepts envisioned for the future of civil air transport consist of unconventional propulsion systems in the close proximity of the airframe. Distributed propulsion system with exhaust configurations that resemble a high aspect ratio rectangular jet are among geometries of interest. Nearby solid surfaces could provide noise shielding for the purpose of reduced community noise. Interaction of high-speed jet exhaust with structure could also generate new sources of sound as a result of flow scrubbing past the structure, and or scattered noise from sharp edges. The present study provides a theoretical framework to predict the scrubbing noise component from a high aspect ratio rectangular exhaust in proximity of a solid surface. The analysis uses the Greens function (GF) to the variable density Pridmore-Brown equation in a transversely sheared mean flow. Sources of sound are defined as the auto-covariance function of second-rank velocity fluctuations in the jet plume, and are modeled using a RANS-based acoustic analogy approach. Acoustic predictions are presented in an 8:1 aspect ratio rectangular exhaust at three subsonic Mach numbers. The effect of nearby surface on the scrubbing noise component is shown on both reflected and shielded sides of the plate.

Propulsion Noise↗
NASA NTRS2021

Evaluation of SO2, SO4(2−) and an Updated SO2 Dry Deposition Parameterization in the United Kingdom Earth System Model

In this study we evaluate simulated surface SO2 and sulphate (SO4(2-)) concentrations from the United Kingdom Earth System Model (UKESM1) against observations from ground based measurement networks in the USA and Europe for the period 1987 to 2014. We find that UKESM1 captures the historical trend for decreasing concentrations of atmospheric SO2 and SO4(2-) in both Europe and the USA over the period 1987 to 2014. However, in the polluted regions of the eastern USA and Europe, UKESM1 over-predicts surface SO2 concentrations by a factor of 3, while under-predicting surface SO4(2-) concentrations by 25-35%. In the cleaner western USA, the model over-predicts both surface SO2 and SO4(2-) concentrations by a factor of 12 and 1.5 respectively. We find that UKESM1’s bias in surface SO2 and SO4(2-) concentrations is variable according to region and season. We also evaluate UKESM1 against total column SO2 from the Ozone Monitoring Instrument (OMI) using an updated data product. This comparison provides information about the model’s global performance, finding that UKESM1 over predicts total column SO2 over much of the globe, including the large source regions of India, China, the USA and Europe as well as over outflow regions. Finally, we assess the impact of a more realistic treatment of the model’s SO2 dry deposition parameterization. This change increases SO2 dry deposition to the land and ocean surfaces, thus reducing the atmospheric loading of SO2 and SO(sup 2-)(sub 4). In comparison with the ground-based and satellite observations, we find that the modified parameterization reduces the models over prediction of surface SO2 concentrations and total column SO2. Relative to the ground-based observations the simulated surface SO4(2-) concentrations are also reduced, while the simulated SO2 dry deposition fluxes increase.

SO2↗
NASA NTRS1971

Continuous propagation of microalgae. III.

Data are presented which give the specific photosynthetic rate and the specific utilization rates of urea and carbon dioxide as functions of specific growth rate for Chlorella. A mathematical model expresses a set of mass balance relations between biotic and environmental materials. Criteria of validity are used to test this model. Predictive procedures are complemented by a particular model of microbial growth. Methods are demonstrated for predicting substrate utilization rates, production rates of extracellular metabolites, growth limiting conditions, and photosynthetic quotients from propagator variables.

Hanson, D. T.↗