Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Evaluation of a V 8 C 7 Anode for Oxygen Evolution in Alkaline Media: Unusual Morphological Behavior

Metallic vanadium carbide (V 8 C 7 ) with cubic symmetry is examined as an oxygen evolution reaction (OER) precatalyst in alkaline media. Herein, we used quasi in situ scanning electron microscopy and energy-dispersive X-ray spectrometry to investigate the structural transformation of the precatalyst V 8 C 7 microparticles during extended cyclic voltammetric (CV) OER testing. Interestingly, an anisotropic morphological transformation (from a distorted sphere to a cuboid) of V 8 C 7 was observed. Our theoretical and experimental results strongly suggest that this morphological change happens due to the selective self-oxidation and dissolution of the V 8 C 7 (110) and (111) surfaces and the subsequent exposure of the relatively stable (100), (010), and (001) surfaces. Lastly, these results also suggest that these stable facets are preferable for the OER, and a current density of 10 mA·cm –2 was delivered at an overpotential of 503 mV after the extended CV OER testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures of the Phosphorylated and VO3-bound 2H-Phosphatase Domain of Sts-2

The C-terminal domain of the suppressor of T cell receptor (TCR) signaling 1 and 2 (Sts-1 and -2) proteins has homology to the 2H-phosphatase family of enzymes. The phosphatase activity of the correspondent Sts-1 domain, Sts-1{sub PGM}, is key for its ability to negatively regulate the signaling of membrane-bound receptors including TCR and the epidermal growth factor receptor (EGFR). A nucleophilic histidine, which is transiently phosphorylated during the phosphatase reaction, is essential for the activity. Here, we present the crystal structure of Sts-2{sub PGM} in the phosphorylated active form and bound to VO{sub 3}, which represent structures of an intermediate and of a transition state analogue along the path of the dephosphorylation reaction. In the former structure, the proposed nucleophilic His366 is the only phoshorylated residue and is stabilized by several interactions with conserved basic residues within the active site. In the latter structure, the vanadium atom sits in the middle of a trigonal bipyramid formed by the three oxygen atoms of the VO{sub 3} molecule, atom NE2 of His366, and an apical water molecule Wa. The V-NE2 bond length (2.25 {angstrom}) suggests that VO{sub 3} is not covalently attached to His366 and that the reaction mechanism is partially associative. The two structures also suggest a role for Glu476 in activating a uniquely positioned water molecule. In both structures, the conformation of the active site is remarkably similar to the one seen in apo-Sts-2{sub PGM} suggesting that the spatial arrangement of the catalytic residues does not change during the dephosphorylation reaction.

59 BASIC BIOLOGICAL SCIENCES↗

Enhanced Lithium-Ion Intercalation Properties of V[subscript 2]O[subscript 5] Xerogel Electrodes with Surface Defects

V{sub 2}O{sub 5} xerogel films were fabricated by casting V{sub 2}O{sub 5} sols onto fluorine-doped tin oxide (FTO) glass substrates and annealing at 300 C for 3 h in different annealing atmospheres of air and nitrogen. Films prepared in different annealing conditions possess different grain sizes and crystallinity, while the vanadium ion oxidation state also varies, as identified by X-ray absorption spectroscopy. A nitrogen annealing atmosphere induces the presence of defects, such as V{sup 4+} ions, and associated oxygen vacancies. Thus, the presence of defects, whether on the film surface or in the bulk, can be controlled by using air and nitrogen annealing atmospheres in the proper order. Electrochemical impedance analyses reveal enhanced charge-transfer conductivity in films with more V{sup 4+} and oxygen vacancies on the film surface, that is, a film annealed, first, for 0.5 h in air and then for 2.5 h in nitrogen. Lithium-ion intercalation measurements show that, at a charge/discharge current density of 600 mA g{sup -1}, this film possesses a noticeably better lithium-ion storage capability than films without surface defects. This sample starts with an initial discharge capacity of 139 mA h g{sup -1}, and the capacity increases slowly to a maximum value of 156 mA h g{sup -1} in the 15th cycle, followed by a mild capacity degradation in later cycles. After 50 cycles, the discharge capacity is still as high as 136 mA h g{sup -1}. A much improved lithium-ion intercalation capacity and cyclic stability are attributed to V{sup 4+} surface defects and associated oxygen vacancies introduced by N{sub 2} annealing.

36 MATERIALS SCIENCE↗

A VO-seeded Approach for the Growth of Star-shaped VO2 and V2O5 Nanocrystals: Facile Synthesis Structural Characterization and Elucidation of Electronic Structure

Obtaining shape and size control of strongly correlated materials is imperative to obtain a fundamental understanding of the influence of finite size and surface restructuring on electronic instabilities in the proximity of the Fermi level. We present here a novel synthetic approach that takes advantage of the intrinsic octahedral symmetry of rock-salt-structured VO to facilitate the growth of six-armed nanocrystallites of related, technologically important binary vanadium oxides VO2 and V2O5. The prepared nanostructures exhibit clear six-fold symmetry and most notably show remarkable retention of electronic structure. The latter has been evidenced through extensive X-ray absorption spectroscopy measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Template Free Synthesis of LiV3O8 Nanorods as a Cathode Material for High-Rate Secondary Lithium Batteries

A novel low temperature method of preparing LiV3O8 as cathode material for high power secondary lithium batteries by thermal co-decomposition lithium and vanadium sources precursors is reported. TG and DTA are used to investigate the thermal decomposition process; XRD, SEM and TEM experiments are carried out to characterize the structural of LiV3O8. As-fabricated LiV3O8 nanorod crystallites are quite uniform and the diameter of which is less than 50 nm. It delivers a maximum specific discharge capacity of 320 mAh g-1 at current density of 100 mA g-1, which is much higher than that of conventional high temperature method fabricated LiV3O8 electrode. Even at higher rate (1 A g-1), it still has an initial specific discharge capacity of 250 mAh g-1. The specific capacity becomes quite stable after initial cycles only with 0.34%, 0.31% and 0.29% fading per cycle under current densities of 100, 300 and 1000 mA g-1 for the later cycles, respectively. The reduced dimension of the particle size is attributed to the reason for the good electrochemical performance. The results demonstrate as-synthesized nanorod LiV3O8 crystallites are promising cathode material for high power lithium batteries.

36 MATERIALS SCIENCE↗

Ab initio study of lithium transition metal fluorophosphate cathodes for rechargeable batteries

Density functional theory (DFT) calculations using plane-wave methods were performed for Li2TMPO4F, LiTMPO4F, and TMPO4F (TM=V, Mn, Fe, Co, Ni) to address their feasibility as high-voltage cathode materials for Li ion batteries. We computed their structures, average open circuit voltages, and thermal stabilities for step-wise lithiation/delithation (discharge/charge) reactions. The calculations suggest that associated unit cell volume changes are sufficiently small on average that they should not be a significant detriment to the mechanical stability of the cathode. In the nickel case, the calculated volume change deviates from the series by increasing during the first delithiation step. Furthermore, the volume increases for all these materials during the second delithiation step. It appears that the relative volume expansion in the series during delithiation is directly correlated to the degree of d-p rehybridization. Predicted average open circuit voltages indicate that these Li-based transition metal fluorophosphates, most of which have yet to be successfully synthesized, are worthy of experimental pursuit as high-voltage cathodes (>3.5 V relative to Li metal), except for the lower predicted voltage for the reaction Li2VPO4F to LiVPO4F. However, examination of the relative thermal stability of possible undesirable decomposition products such as LiF suggests that in these materials Li extraction efficiency and the reversibility may be low in all but the vanadium phases.

25 ENERGY STORAGE↗

Nanoscale depth and lithiation dependence of V 2 O 5 band structure by cathodoluminescence spectroscopy

Vanadium pentoxide (V 2 O 5 ) is a very well-known cathode material that has attracted considerable interest for its potential use in solid-state lithium-ion batteries. We pioneer the use of depth-resolved cathodoluminescence spectroscopy (DRCLS) to monitor the changes in the electronic structure of lithiated V 2 O 5 from the free surface to the thin film bulk several hundred nm below as a function of lithiation. DRCLS measurements of V 2 O 5 interband transitions are in excellent agreement with density functional theory (DFT) calculations. The direct measure of V 2 O 5 's electronic band structure as a function of lithiation level provided by DRCLS can help inform solid-state battery designs to further withstand degradation and increase efficiency. In particular, these unique electrode measurements may reveal physical mechanisms of lithiation that change V 2 O 5 irreversibly, as well as methods to mitigate them in solid-state batteries.

25 ENERGY STORAGE↗

Progress towards materials science above 1000 GPa (10 Mbar) on the NIF laser

Solid state dynamics experiments at extreme pressures, P > 1000 GPa (10 Mbar), and ultrahigh strain rates (1.e6-1.e8 1/s) are being developed for the National Ignition Facility (NIF) laser. These experiments will open up exploration of new regimes of materials science at an order of magnitude higher pressures than have been possible to date. Such extreme, solid state conditions can be accessed with a ramped pressure drive. The experimental, computational, and theoretical techniques are being developed and tested on the Omega laser. Velocity interferometer measurements (VISAR) establish the high pressure conditions generated by the ramped drive. Constitutive models for solid state strength under these conditions are tested by comparing simulations with experiments measuring perturbation growth from the Rayleigh-Taylor instability in solid state samples of vanadium. Radiography techniques using synchronized bursts of x-rays have been developed to diagnose this perturbation growth. Experiments on Omega demonstrating these techniques at peak pressures of {approx}1 Mbar will be discussed. The time resolved observation of foil cracking and void formation show the need for tamped samples and a planar drive.

42 ENGINEERING↗

Cryogenic Field Measurement of Pr{sub 2}Fe{sub 14}B Undulator and Performance Enhancement Options at the NSLS-II

Short period (14.5mm) hybrid undulator arrays composed of Praseodymium Iron Boron (Pr{sub 2}Fe{sub 14}B) magnets (CR53, NEOMAX, Inc.) and vanadium permendur poles have been fabricated at Brookhaven National Laboratory. Unlike Neodymium Iron Boron (Nd{sub 2}Fe{sub 14}B) magnets which exhibit spin reorientation at a temperatures below 150 K, PrFeB arrays monotonically increase performance with lower operating temperature. It opens up the possibility for use in operating a cryo-permanent magnet undulator (CPMU) in the range of 40 K to 60 K where very efficient cryocoolers are available. Magnetic flux density profiles were measured at various temperature ranges from room temperature down to liquid helium (LHe) using the Vertical Testing Facility (VTF) at the National Synchrotron Light Source-II (NSLS-II). Temperature variations of phase error have been characterized. In addition, we examined the use of textured Dysprosium (Dy) poles to replace permendur poles to obtain further improvement in performance.

43 PARTICLE ACCELERATORS↗

Monochromatic x-ray radiography for areal-density measurement of inertial fusion energy fuel in fast ignition experiment

Ultrafast, two-dimensional x-ray imaging is an important diagnostics for the inertial fusion energy research, especially in investigating implosion dynamics at the final stage of the fuel compression. Although x-ray radiography was applied to observing the implosion dynamics, intense x-rays emitted from the high temperature and dense fuel core itself are often superimposed on the radiograph. This problem can be solved by coupling the x-ray radiography with monochromatic x-ray imaging technique. In the experiment, 2.8 or 5.2 keV backlight x-rays emitted from laser-irradiated polyvinyl chloride or vanadium foils were selectively imaged by spherically bent quartz crystals with discriminating the out-of-band emission from the fuel core. This x-ray radiography system achieved 24 {mu}m and 100 ps of spatial and temporal resolutions, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

State-dependent photoionization cross-sections of 3d transition metal atoms

Using the saturation method, we measured the absolute photoionization cross-sections of several excited states of titanium, vanadium, chromium, iron, and cobalt. These results are reported for the first time in this paper. The measured values range from 0.4 {+-} 0.1 Mb to 6.9 {+-} 2.0 Mb. The results show that the photoionization cross-section depends on the atomic state and not just on the electronic configuration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural and electrochemical properties of electron beam evaporated V{sub 2}O{sub 5} thin films

Vanadium pentoxide is one of the most promising cathode materials because it offers high energy density, low cost, low toxicity over the other cathode materials. Its layered and open structure makes this material in thin film form well suited for electro-chemical insertion reactions with the Li ions. In the present investigation, V{sub 2}O{sub 5} thin films have been prepared by electron beam evaporation technique on gold coated silicon substrates maintained at a substrate temperature of 250 Degree-Sign C in an oxygen partial pressure of 2 Multiplication-Sign 10{sup -4} mbar. The XRD patterns exhibited three predominant diffraction peaks corresponding to (200) (001) and (400) planes of orthorhombic phase of V{sub 2}O{sub 5} with P{sub mnm} space group. The electrochemical characteristics of V{sub 2}O{sub 5} thin films with thickness of 600 nm were examined in non-aqueous region. The film exhibited step wise discharge with two plateaus. The as-deposited film delivered a discharge capacity of 70 {mu}Ah/(cm{sup 2}-{mu}m) at a current density of 30 {mu}A/cm{sup 2}. Annealing of these films at 450 Degree-Sign C exhibited a better discharge capacity of 90 {mu}Ah/(cm{sup 2}-{mu}m).

36 MATERIALS SCIENCE↗

Influence of capping layers on CoFeB anisotropy and damping

Magnetic behavior of CoFeB at various thicknesses ranging from 2 nm to 8 nm capped with different materials, such as MgO, Ta, Ru, and V have been studied. The films were sputter-deposited and subsequently characterized by magnetometry and broadband ferromagnetic resonance (FMR). There are magnetically dead layers at the interface observed with Ru and Ta capping layers, while MgO and V have almost no effect on the magnetization of the CoFeB. As the ferromagnetic layer is made thinner, the effective magnetization decreases, indicating an interfacial perpendicular anisotropy. Particularly in the case of MgO, V/Ru, and V/Ta capping layers, interfacial perpendicular anisotropy is induced in CoFeB, and the Gilbert damping parameter is also reduced. The origin of this perpendicular magnetic anisotropy (PMA) is understood to be caused by the interface anisotropy between the free layer and the capping layer. The effect of post-deposition annealing and CoFeB thickness on the anisotropy and damping of V/Ta capped samples are reported. Doping CoFeB with vanadium (V) greatly reduced the 4{pi}M{sub s} and 4{pi}M{sub eff} values, resulting in an effective increase in the PMA.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental observations of turbulent mixing due to Kelvin-Helmholtz instability on the OMEGA Laser Facility

Shear-flow, Kelvin-Helmholtz (KH) turbulent mixing experiments were performed on the OMEGA Laser Facility [Boehly et al., Opt. Commun. 133, 495 (1997)] in which laser-driven shock waves propagated through a low-density plastic foam placed on top of a higher-density plastic foil. The plastic foil was comprised a thin iodine-doped plastic tracer layer bonded on each side to an undoped density-matched polyamide-imide plastic. Behind the shock front, lower-density foam plasma flowed over the higher-density plastic plasma, such that the interface between the foam and plastic was KH unstable. The initial perturbations consisted of pre-imposed, sinusoidal 2D perturbations, and broadband 3D perturbations due to surface roughness at the interface between the plastic and foam. KH instability growth was measured using side-on radiography with a point-projection 5-keV vanadium backlighter. Time-integrated images were captured on D-8 x-ray film. Spatial density profiles of iodine-doped plastic mixed with foam were inferred using x-ray radiographs. The mixing layer ensuing from the KH instability with layer width up to {approx}100 {mu}m was observed at a location {approx}1 mm behind the shock front. The measured mixing layer width was in good agreement with predictions based on a simple self-similar model of KH instability growth using an estimate of the shear velocity obtained from numerical simulations of the experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Infrared characteristics of VO{sub 2} thin films for smart window and laser protection applications

Vanadium dioxide (VO{sub 2}) films with a low semiconductor-to-metal transition temperature of 45 Degree-Sign C were fabricated through direct current magnetron sputtering followed by a post-annealing. Atomic force microscopy measurements show that the VO{sub 2} grain size is about one hundred of nanometers. Infrared (IR) characteristic is well investigated by applying a He-Ne laser power intensity measurement, and the result reveals that the VO{sub 2} film exhibits excellent IR switching property. Furthermore, solar smart window and laser protection experiments demonstrate that the obtained VO{sub 2} thin film is a promising material for the application in related fields.

36 MATERIALS SCIENCE↗

Evidence of the semiconductor-metal transition in V{sub 2}O{sub 5} thin films by the pulsed laser photoacoustic method

In this work, the pulsed photoacoustic technique was used to investigate the semiconductor-metal transition of thin vanadium pentoxide films (V{sub 2}O{sub 5}) under increasing temperature. The V{sub 2}O{sub 5} thin films were simultaneously deposited by RF magnetron sputtering at room temperature, on corning glass and SnO{sub 2}:F/glass substrates, in order to compare the photoacoustic response. The elemental and structural analysis of the V{sub 2}O{sub 5} films was performed by Rutherford backscattering spectroscopy and X-ray diffraction. The optical transmission and band gap were determined using UV-Vis spectroscopy. The electrical properties were measured using four-point probe measurements with the Van der Pauw geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cationic (V, Y)-codoped TiO{sub 2} with enhanced visible light induced photocatalytic activity: A combined experimental and theoretical study

To employ TiO{sub 2} as an efficient photocatalyst, high reactivity under visible light and improved separation of photoexcited carriers are required. An effective co-doping approach is applied to modify the photocatalytic properties of TiO{sub 2} by doping vanadium (transition metal) and yttrium (rare earth element). V and/or Y codoped TiO{sub 2} was prepared using hydrothermal method without any post calcination for crystallization. Based on density functional theory, compensated and noncompensated V, Y codoped TiO{sub 2} models were constructed and their structural, electronic, and optical properties were calculated. Through combined experimental characterization and theoretical modeling, V, Y codoped TiO{sub 2} exhibited high absorption coefficient with enhanced visible light absorption. All the prepared samples showed pure anatase phase and spherical morphology with uniform particle distribution. Electronic band structure demonstrates that V, Y codoping drastically reduced the band gap of TiO{sub 2}. It is found that both the doped V and Y exist in the form of substitutional point defects replacing Ti atom in the lattice. The photocatalytic activity, evaluated by the degradation of methyl orange, displays that the codoped TiO{sub 2} sample exhibits enhanced visible light photocatalytic activity. The synergistic effects of V and Y drastically improved the Brunauer-Emmett-Teller specific surface area, visible light absorption, and electron-hole pair's separation leading to the enhanced visible light catalytic activity.

36 MATERIALS SCIENCE↗

Metal-insulator transition in SrTi{sub 1−x}V{sub x}O{sub 3} thin films

Epitaxial SrTi{sub 1−x}V{sub x}O{sub 3} (0 ≤ x ≤ 1) thin films were grown on (001)-oriented (LaAlO{sub 3}){sub 0.3}(Sr{sub 2}AlTaO{sub 6}){sub 0.7} (LSAT) substrates using the pulsed electron-beam deposition technique. The transport study revealed a temperature driven metal-insulator transition (MIT) at 95 K for x = 0.67. The films with higher vanadium concentration (x > 0.67) were metallic corresponding to a Fermi liquid system. In the insulating phase (x < 0.67), the resistivity behavior was governed by Mott's variable range hopping mechanism. The possible mechanisms for the induced MIT are discussed, including the effects of electron correlation, lattice distortion, and Anderson localization.

36 MATERIALS SCIENCE↗