Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Variable Refractive Index Effects on Radiation in Semitransparent Scattering Multilayered Regions

A simple set of equations is derived for predicting the temperature distribution and radiative energy flow in a semitransparent layer consisting of an arbitrary number of laminated sublayers that absorb, emit, and scatter radiation. Each sublayer can have a different refractive index and optical thickness. The plane composite region is heated on each exterior side by a different amount of incident radiation. The results are for the limiting case where heat conduction within the layers is very small relative to radiative transfer, and is neglected. The interfaces are assumed diffuse, and all interface reflections are included in the analysis. The thermal behavior is readily calculated from the analytical expressions that are obtained. By using many sublayers, the analytical expressions provide the temperature distribution and heat flow for a diffusing medium with a continuously varying refractive index, including internal reflection effects caused by refractive index gradients. Temperature and heat flux results are given to show the effect of variations in refractive index and optical thickness through the multilayer laminate.

Siegel, R.↗
NASA NTRS1975

The effect of thermal exposure on the mechanical properties of aluminum-graphite composites

The mechanical properties of aluminum-graphite composites were measured at room temperature in the as-received condition, after elevated temperature exposure and after thermal cycling. The composites were fabricated by solid-state diffusion bonding of liquid-phase Al-infiltrated Thornel 50 fibers. The results showed that the maximum longitudinal tensile strength of the as-received material was 80,000 psi, which corresponds well with the rule of mixture value. The composite strength was observed to vary widely, depending on the extent of wetting of the fibers by the aluminum. The strength of the composites in the transverse direction was generally very low, due to poor interfacial bonding. Aluminum carbide (Al4C3) formed at the surface of the fibers at temperatures greater than 500 C. Development of the carbide was shown to be diffusion-controlled and was dependent on the time and temperature used. It was shown that the tensile strength was virtually unaffected by heat-treatment up to 500 C; beyond that temperature a drastic degradation of tensile strength occurred. Thermal cycling of the composites below 500 C resulted in an observable degradation of the composite strength.

Khan, I. H.↗
NASA NTRS1995

Low-Noise Wide Bandwith, Hot Electron Bolometer Mixers for Submillimeter Wavelengths

Recently a novel superconductive hot-electron micro-bolometer has been proposed which is both fast and sensitive (D. E. Prober, Appl. Phys. Lett. 62, 2119, 1993). This device has several important properties which make it useful as a heterodyne sensor for radioastronomy applications at frequencies above 1 THz. The thermal response time of the device is fast enough, several 10's of picoseconds, to allow for IF's of several GHz. This bolometer mixer should operate well up to at least 10 THz. There is no energy gap limitation as in an SIS mixer, since the mixing process relies on heating of the electron gas. In fact, rf power is absorbed more uniformly above the gap frequency. The mixer noise should be near quantum-limited, and the local oscillator (LO) power requirement is very low: / 10 nW for a Nb device. One of the unique features of this device is that it employs rapid electron diffusion into a normal metal, rather than phonon emission, as the thermal conductance that cools the heated electrons. In order for diffusion to dominate over phonon emission, the device must be short, less than 0.5.

Bolometer Mixers↗
DOE OSTI2020

Anharmonic lattice dynamics and superionic transition in AgCrSe 2

Intrinsically low lattice thermal conductivity ( κ l a t ) in superionic conductors is of great interest for energy conversion applications in thermoelectrics. Yet, the complex atomic dynamics leading to superionicity and ultralow thermal conductivity remain poorly understood. Here, we report a comprehensive study of the lattice dynamics and superionic diffusion in A g C r S e 2 from energy- and momentum-resolved neutron and X-ray scattering techniques, combined with first-principles calculations. Our results settle unresolved questions about the lattice dynamics and thermal conduction mechanism in A g C r S e 2 . We find that the heat-carrying long-wavelength transverse acoustic (TA) phonons coexist with the ultrafast diffusion of Ag ions in the superionic phase, while the short-wavelength nondispersive TA phonons break down. Strong scattering of phonon quasiparticles by anharmonicity and Ag disorder are the origin of intrinsically low κ l a t . The breakdown of short-wavelength TA phonons is directly related to the Ag diffusion, with the vibrational spectral weight associated to Ag oscillations evolving into stochastic decaying fluctuations. Furthermore, the origin of fast ionic diffusion is shown to arise from extended flat basins in the energy landscape and collective hopping behavior facilitated by strong repulsion between Ag ions. These results provide fundamental insights into the complex atomic dynamics of superionic conductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Experimental and modeling study of the effect of confinement on the thermal decomposition of organic materials

Simultaneous Thermal Analysis is widely used to study thermal decomposition of a variety of organic materials, and the choice of experimental conditions is very important to obtain reliable mass loss and heat flow curves. Here in this work we investigate the effect of confinement on the thermal decomposition of organic materials. As an example, we explore high-density polyethylene (HDPE) and one of its pyrolysis products, namely eicosane (C 20 H 42 ), through experiments and modeling in open crucibles and crucibles closed with a pierced lid. A new model is developed for evaporation and sublimation from open and pinhole thermal-analysis pans. It considers the kinetic resistance of evaporation at the liquid-vapor interface, inhibition of evaporation by buildup of vapor inside the pan, thermal expansion of vapor inside the pan, and diffusion of vapor from the pan. The model is validated using simultaneous heat-flow and mass-loss measurements of n-eicosane evaporation for various pinhole sizes, down to 50 µm. The importance of product evaporation inhibition for measuring polymer decomposition was demonstrated using HDPE. This study sheds light on the effect of confinement on the mass loss rate of organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Stable and Catalytically Active Shape-Engineered Cerium Oxide Nanorods by Controlled Doping of Aluminum Cations

Shape-engineered nanocrystals (SENs) promise a better selectivity and a higher activity in catalytic reactions than the corresponding non-shape-engineered ones because of their larger specific surface areas and desirable crystal facets. However, often, it is challenging to apply SENs in practical catalytic applications at high reaction temperatures, where SENs deforms into more stable, less active nanoparticles. In this paper, we show that atomic layer deposition (ALD) of Al 2 O 3 at 200 °C can controllably dope Al cations into the shape-engineered CeO 2 nanorods (NRs) to not only increase their shape transition temperature from 400 °C to beyond 700 °C but also greatly increase their specific reversible oxygen storage capacity (srOSC). Furthermore, the substituted Al3+ ions impede the surface diffusion of Ce ions and therefore improve the thermal stability of CeO 2 NRs. These Al3+ dopants form -Al–O–Ce–O– clusters, which are new Ce species and can be reversibly reduced and oxidized at 500–700 °C. This low-temperature chemical doping method decouples the synthesis process of SENs from the doping process and maintains the shape of the SENs during the activation of dopants. This concept could be adopted to enable the applications of other SENs in challenging high-temperature environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Prediction of Bi 2 Te 3 -Sb 2 Te 3 Interfacial Conductance and Superlattice Thermal Conductivity Using Molecular Dynamics Simulations

Bismuth telluride (Bi 2 Te 3 ) and its alloys with antimony telluride (Sb 2 Te 3 ) have long been considered to be the best room-temperature bulk thermoelectric (TE) materials. In recent decades, proof-of-concept demonstrations on Bi 2 Te 3 -Sb 2 Te 3 nanostructures have shown high TE performance due to reduction in lattice thermal conductivities. Particularly, ultra-low thermal conductivities have been observed in Bi 2 Te 3 -Sb 2 Te 3 1D superlattices, leading to thermoelectric figures of merit (ZT) as high as 2.4. In contrast, very few computational studies have been performed to provide insight into the phonon transport across these nanostructures. In this work, we use non-equilibrium molecular dynamics simulations with previously developed force fields to simulate thermal transport across Bi 2 Te 3 -Sb 2 Te 3 interfaces and superlattices. We first calculate the thermal conductance associated with a Bi 2 Te 3 -Sb 2 Te 3 interface across a temperature range of 200–400 K. Furthermore, the values are also compared with thermal conductances calculated by a modified Landauer transport formalism using phonon transmission coefficients obtained from the diffuse mismatch model. Our results show that inelastic scattering processes contribute to an increase in interfacial thermal conductance at higher temperatures. Finally, we calculate the thermal conductivities of Bi 2 Te 3 -Sb 2 Te 3 superlattices with varying period lengths from 2 to 18 nm. A minimum thermal conductivity of 0.27 W/mK is observed at a period length of 4 nm, which is attributed to the competition between incoherent and coherent phonon transport regimes. In comparison with previous experimental measurements in the literature, our results show good agreement with respect to the range of thermal conductivity values and the period length corresponding to the minimum superlattice thermal conductivity.

42 ENGINEERING↗
DOE OSTI2025

Unveiling the Origin of Morphological Instability in Topologically Complex Electrocatalytic Nanostructures

Coarsening and degradation phenomena in metals have largely focused on thermally driven processes, such as bulk and surface diffusion. However, dramatic coarsening has been reported in high-surface-area, nanometer-sized Pt-based catalysts during potential cycling in an electrolyte at room temperature─a temperature too low for the process to be explained purely by surface mobility values measured in both vacuum and electrolytes (∼10 –22 and ∼10 –18 cm 2 /s, respectively). This morphological evolution must be due to a different mechanism for mass transport that is sensitive to electrochemical conditions (e.g., electrolyte composition, potential limits, and scan rate). However, there have been no notable studies of electrochemically induced coarsening in nanometer-sized electrocatalysts. Here, we unveil the origins of coarsening in an electrolyte through coupled in situ experiments and atomistic kinetic Monte Carlo (kMC) simulations. Our work demonstrates electrochemical coarsening is driven by two concurrent mechanisms that can be explained at the atomistic level: (i) dissolution/redeposition during the reduction of an oxidized species and (ii) rapid surface diffusion of undercoordinated atoms.

gold↗
DOE OSTI2022

Tuning the Co/Fe ratio in BaCo x Fe 0.8– x Zr 0.1 Y 0.1 O 3– δ , a promising triple ionic and electronic conducting oxide, to boost electrolysis and fuel cell performance

The triple conducting oxide BaCo 0.4 Fe 0.4 Zr 0.1 Y0.1O 3–δ (BCFZY4411), which accommodates simultaneous transport of protons, oxygen ions, and p-type electronic carriers, has been intensively investigated in recent years as a high-performance positive electrode material for fuel cell and electrolysis applications. The heavy Co and Fe-based transition metal doping in BCFZY4411 ensures adequate electrical conductivity while the multiple oxidation states of Co and Fe assist the electrocatalytic and redox ability. Despite the considerable role of Co and Fe transition metal doping in controlling electrochemical activity, however, the study of alternative BCFZY compositions with varying Co/Fe ratios has not yet been pursued. Here, we evaluate the electrochemical performance of a series of BaCo x Fe 0.8–x Zr 0.1 Y0.1O 3–δ compositions with varying Co/Fe ratio (x = 0.1, 0.2, 0.4, 0.6, 0.7) and use oxygen ion tracer diffusion and in situ high-temperature X-ray diffraction to investigate the effect of Co/Fe ratio on electrocatalytic activity, electronic conductivity, oxygen ion incorporation and transport kinetics, and thermomechanical behavior. We find that Co-rich BCFZY7111 yields the highest performance due to exceptionally high oxygen vacancy diffusion and shows a lower and more linear thermal expansion behavior compared to Fe-rich compositions. A protonic ceramic button cell incorporating a BCFZY7111 positive electrode yields a peak power density of 695 mW cm –2 under fuel cell mode and an electrolysis current density of 1976 mA cm –2 at 1.4 V at 600 °C, underscoring the promise of this new BCFZY electrode composition.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Constraints on the origin of the radio synchrotron background via angular correlations

ABSTRACT The origin of the radio synchrotron background (RSB) is currently unknown. Its understanding might have profound implications in fundamental physics or might reveal a new class of radio emitters. In this work, we consider the scenario in which the RSB is due to extragalactic radio sources and measure the angular cross-correlation of Low-Frequency Array (LOFAR) images of the diffuse radio sky with matter tracers at different redshifts, provided by galaxy catalogues and cosmic microwave background lensing. We compare these measured cross-correlations to those expected for models of RSB sources. We find that low-redshift populations of discrete sources are excluded by the data, while higher redshift explanations are compatible with available observations. We also conclude that at least 20 per cent of the RSB surface brightness level must originate from populations tracing the large-scale distribution of matter in the Universe, indicating that at least this fraction of the RSB is of extragalactic origin. Future measurements of the correlation between the RSB and tracers of high-redshift sources will be crucial to constraining the source population of the RSB.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1978

Transport properties of monatomic carbon

Transport collision integrals for each of the 18 molecular C2 states that dissociate into ground state carbon atoms are presented. The integrals are obtained by fitting two-body semiempirical interaction potentials, for which the collision integrals are tabulated, to experimental and/or accurate theoretical calculations for each of these states. The collision integrals are applied to calculate the diffusion coefficient, viscosity, and translational contribution to the thermal conductivity of monatomic carbon at 1-atm pressure from 1000 K to 25,000 K. Because of ablation injection, monatomic carbon is an important flow field constituent of ablative flow during planetary entry, and knowledge of the transport properties for carbon species is required for calculating the flow field properties and surface heating.

Biolsi, L.↗
NASA NTRS1979

Study of the Effects of Impurities on the Properties of Silicon Materials and Performance of Silicon Solar Cell

Numerical solutions were obtained from the exact one dimensional transmission line circuit model to study the following effects on the terrestrial performance of silicon solar cells: interband Auger recombination; surface recombination at the contact interfaces; enhanced metallic impurity solubility; diffusion profiles; and defect-impurity recombination centers. Thermal recombination parameters of titanium impurity in silicon were estimated from recent experimental data. Based on those parameters, computer model calculations showed that titanium concentration must be kept below 6x10 to the 12th power Ti/cu cm in order to achieve 16% AM1 efficiency in a silicon solar cell of 250 micrometers thick and 1.5 ohm-cm resistivity.

Sah, C. T.↗
NASA NTRS1981

Transport properties associated with entry into the atmosphere of Titan

In this paper the transport properties in the atmosphere of Titan and at the shock front and the probe surface for non-ablative entry into Titan's atmosphere are calculated, using the kinetic theory of gases. The species N2, H2, CH4, HCN, N, and H contribute to the transport properties under these conditions. The transport properties were calculated by using accurate potential energy curves for each of the thirteen two-body interactions which occur between these species. Results are given for the binary diffusion coefficients, the non-reactive and reactive thermal conductivity, and the viscosity from 1000 K to 8000 K. This information is needed for calculating flowfield properties and surface heating rates. The most important conclusions are that the non-reactive thermal conductivity is much larger behind the shock layer than it is in the ambient atmosphere and that the nonreactive thermal conductivity appears to be nearly constant in the shock layer.

Flori, B.↗
NASA NTRS1984

A detailed X-ray and radio comparison of Kepler's supernova remnant

High-resolution radio images of Kepler's SNR (SNR (SN 1604) at 6 and 21 cm have been obtained using the VLA. The orientation of linear polarization in the SNR implies a substantial nonrandom radial component for the magnetic field of the remnant. Based on a new X-ray picture of the SNR, obtained using the Einstein Observatory, a detailed comparison of the X-ray and radio morphology is carried out. There is a good correlation between rotation measure, obtained from the radio maps, and emission measure, an X-ray-derived quantity in the SNR shell. From the mean electron density value infered from an analysis of X-ray fluxes, a mean radial magnetic field of 14 micro G and a total magnetic field of 70 microG are estimated. The energy density of relativistic electrons in Kepler's SNR in the shell comparable to the energy density in the magnetic field; the relativistic electron-pressure is 2 percent of the thermal gas pressure. The strong correlation between radio emissivity and X-ray emissivity found over the SNR in somewhat large scale can be ascribed to acceleration of thermal electrons at the shock wave and insignificant diffusion of resultant relativistic electrons.

Matsui, Y.↗
NASA NTRS1989

Dynamic mixing in magma bodies - Theory, simulations, and implications

The magma-mixing process is different from the mantle mixing process in that the mixing components of magma are dynamically active, with the melt density depending strongly on composition. This paper describes simulations of time-dependent variable-viscosity double-diffusive convection which were carried out to investigate quantitatively the mixing dynamics of magma in melt-dominated magma bodies. Results show that the dynamics of double-diffusive convection can impart complex patterns of composition, through time and space. The mixing time depends nonlinearly on many factors, including heat flux driving convection, the rate of diffusion of chemical species, the relative importance of thermal and chemical buoyancy, the viscosities of the mixing components, and the shape of the magma body.

Oldenburg, Curtis M.↗
NASA NTRS1992

DSMC analysis of species separation in rarefied nozzle flows

The direct-simulation Monte Carlo method has been used to investigate the behavior of a small amount of a harmful species in the plume and the backflow region of nuclear thermal propulsion rockets. Species separation due to pressure diffusion and nonequilibrium effects due to rapid expansion into a surrounding low-density environment are the most important factors in this type of flow. It is shown that a relatively large amount of the lighter species is scattered into the backflow region and the heavier species becomes negligible in this region due to the extreme separation between species. It is also shown that the type of molecular interaction between the species can have a substantial effect on separation of the species.

Chung, Chan-Hong↗