SEARCH · Engineering Papers

Results for “texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Origin of Archean anorthosites - Evidence from the Bad Vermilion Lake anorthosite complex, Ontario

Studies of the petrology and geochemistry of the anorthosite complex at Bad Vermillion Lake, Canada, based on 400 samples collected in summer, 1979, are presented. Petrographic, microprobe, X-ray-fluorescence, and instrumental-neutron-activation analyses were performed. Major and trace-element abundances of the anorthositic rocks and surrounding mafic and felsic rocks are reported in tables, chondrite-normalized rare-earth-element patterns are shown, and the anorthositic, intrusive, and metavolcanic formations are characterized in detail. The anothrositic plagioclases are found to have a coarse porphyritic texture and calcic composition (80 normative mol percent An) similar to those of other Archean anorthosite complexes. Chemical similarities indicate that the gabbro and mafic to felsic metavolcanic formations associated with the anorthosite complex may be comagmatic with it, while the absence of ultramafic material and the bulk composition of the comagmatic basalt (about 20 wt percent Al2O3) suggest that much of the original comagmatic material has been separated.

Ashwal, L. D.↗

NASA NTRS1983

Regolith breccia Allan Hills A81005 - Evidence of lunar origin, and petrography of pristine and nonpristine clasts

It is shown that the ratios of MnO/FeO in pyroxene, texture (abundant brown and swirly glass, which are typical of lunar regolith breccias) and overall composition (approximately 75 percent plagioclase) indicate a lunar origin for the regolith breccia Allan Hills A81005, presumably from an unsampled region of the moon. The rock is found to differ in detail from other regolith samples; for example, it has exceptionally low contents of Na and KREEP. In addition, a pristine clast is found to contain exceptionally coarse augite in comparison with similar Apollo samples. It is found that ALHA81005 is not perceptibly more shocked than typical Apollo regolith breccias. It is concluded that the discovery of this rock on earth strengthens the suggestion that SNC achondrites were derived by impact ejection from Mars.

Warren, P. H.↗

NASA NTRS1983

Compositional implications regarding the lunar origin of the ALHA 81005 meteorite

Geochemically, ALHA 81005 has all the attributes expected of a regolith sample from the lunar highlands. Most important is its Fe/Mn ratio (77), within an uncertainty the same as the mean lunar ratio. There are significant differences, however, in comparison to previously sampled lunar regoliths. The closest precedents are the Apollo-16 and Luna-20 regoliths, particularly the latter, but ALHA 81005 has lower contents of Na, Ti, and incompatible elements. Feldspathic granulitic breccias such as 72559, which texturally resemble the most abundant type of clast in ALHA 81005, are also similar compositionally. From its low KREEP and Na contents ALHA 81005 is inferred to have originated well away from the K, Th, and U-rich region near the center of the nearside, at least as far away as the eastern limb.

Kallemeyn, G. W.↗

NASA NTRS1983

Land use inventory of Salt Lake County, Utah from color infrared aerial photography 1982

The preparation of land use maps of Salt Lake County, Utah from high altitude color infrared photography is described. The primary purpose of the maps is to aid in the assessment of the effects of urban development on the agricultural land base and water resources. The first stage of map production was to determine the categories of land use/land cover and the mapping unit detail. The highest level of interpretive detail was given to the land use categories found in the agricultural or urbanized portions of the county; these areas are of primary interest with regard to the consumptive use of water from surface streams and wells. A slightly lower level of mapping detail was given to wetland environments; areas to which water is not purposely diverted by man but which have a high consumptive rate of water use. Photos were interpreted on the basis of color, tone, texture, and pattern, together with features of the topographic, hydrologic, and ecological context.

Price, K. P.↗

NASA NTRS1983

Application of image processing technology to problems in manuscript encapsulation

The long term effects of encapsulation individual sheets of the Codex Hammer were investigated. The manuscript was simulated with similar sheets of paper which were photographed under repeatable raking light conditions to enhance their surface texture, encapsulated in plexiglas, cycled in an environmental test chamber, and rephotographed at selected intervals. The film images were digitized, contrast enhanced, geometrically registered, and apodized. An FFT analysis of a control sheet and two experimental sheets indicates no micro-burnishing, but reveals that the ""mesoscale'' deformations with sizes 8mm are degrading monotonically, which is of no concern. Difference image analysis indicates that the sheets were increasingly stressed with time and that the plexiglas did not provide a sufficient environmental barrier under the simulation conditions. The relationship of these results to the Codex itself is to be determined.

Glackin, D. L.↗

NASA NTRS1984

Friction and wear behavior of aluminum and composite airplane skins

Friction and wear behavior was determined for small skin specimens under abrasive loading conditions typical of those occurring on the underside of a transport airplane during emergency belly landing. A test apparatus consisting of a standard belt sander provided the sliding surface. Small test specimens constructed of aluminum, standard graphite-epoxy composite, aramid-epoxy composite, and toughened-resin composites were tested undar a range of pressures, belt velocities, and belt-surface textures. The effects of these test variables on the wear rate and the coefficient of friction are discussed and comparisons are made between the composite materials and aluminum. The effect of fiber orientation in the composite materials on wear rate was also investigated. In addition, tests were performed in which thermocouples were imbedded into the various test specimens to obtain temperature-time histories during abrasion.

Jackson, K. E.↗

NASA NTRS1984

Interpreting Michigan forest cover types from color infrared aerial photographs

The characteristics of 17 cover types (13 forest types or tree species and 4 nonforest cover types) in Michigan are discussed as well as their interpretation from medium scale color infrared photography. The occurrence of each type is described by region and site requirements. Those attributes of a tree or stand which are helpful when attempting to interpret the type from a vertical perspective are discussed as well as common crown types. The identification of the forest type or tree species by using image characteristics (size, shape, shadow, color, texture, pattern, or association) is discussed. Ground photographs and sketches of individual trees are included. Stereograms of typical stands are available.

Hudson, W. D.↗

NASA NTRS1984

Classification of volcanoes of the Kane Patera Quadrangle of Io: Proportions of lava flows and pyroclastic flows

Voyager 1 images show 14 volcanic centers wholly or partly within the Kane Patera quadrangle of Io, which are divided into four major classes: (1) shield with parallel flows; (2) shield with early radial fan shapd flows; (3) shield with radial fan shaped flows, surfaces of flows textured with longitudinal ridges; and (4) depression surrounded by plateau-forming scarp-bounded, untextured deposits. The interpretation attempted here hinges largely on the ability to distinguish lava flows from pyroclastic flows by remote sensing.

Elston, W. E.↗

NASA NTRS1984

Experiments on water/melt explosions, nature of products, and models of dispersal

Experiments were carried out in a steel pressure device using controlled amounts of water and thermite melt to examine the mechanical energy released on explosive mixing following the initial contact of the two materials. An experimental design was used to allow the direct calculation of the mechanical energy by the dynamic lift of the device as recorded both optically and physically. A large number of experiments were run to accurately determine the optimum mixture of water and melt for the conversion of thermal to mechanical energy. The maximum efficiency observed was about 12% at a water/thermite mass ratio of 0.50. These experiments are the basis for the development of models of hydroexplosions and melt fragmentation. Particles collected from the experimental products are similar in size and shape to pyroclasts produced by much larger hydrovolcanic explosions. Melt rupture at optimum ratios produces very fine particles whereas rupture at high or low water/melt ratios produces large melt fragments. Grain surface textures in the experimental products are also related to the water/melt ratio and the mechanism of explosive mixing. It is thus possible to have qualitative information about the nature of the explosion from the sizes and shapes of the fragments produced.

Sheridan, M. F.↗

NASA NTRS1984

Weathered stony meteorites from Victoria Land, Antarctica, as possible guides to rock weathering on Mars

Parallel studies of Martian geomorphic features and their analogs on Earth continue to be fruitful in deciphering the geologic history of Mars. In the context of rock weathering, the Earth-analog approach is admirably served by the study of meteorites recovered from ice sheets in Antarctica. The weathering environment of Victoria Land possesses several Mars-like attributes. Four of the five Antarctic meteorites being studied contain rust and EETA79005 further possesses a conspicuous, dark, weathering rind on one side. Secondary minerals (rust and salts) occur both on the surfaces and interiors of some of the samples and textural evidence indicates that such secondary mineralization contributed to physical weathering (by salt riving) of the rocks. Several different rust morphologies occur and emphasis is being placed on identifying the phase compositions of the various rust occurrances. A thorough understanding of terrestrial weathering features of the meteorites is a prerequisite for identifying possible Martian weathering features (if such features exist) that might be postulated to occur in some meteorites.

Gooding, J. L.↗

NASA NTRS1984

Microwave radiometer experiment of soil moisture sensing at BARC test site during summer 1981

Soil moisture was measured by truck mounted microwave radiometers at the frequencies of 1.4 GHz, 5 GHz, and 10.7 GHz. The soil textures in the two test sites were different so that the soil type effect of microwave radiometric response could be studied. Several fields in each test site were prepared with different surface roughnesses and vegetation covers. Ground truth on the soil moisture, temperature, and the biomass of the vegetation was acquired in support of the microwave radiometric measurements. Soil bulk density for each of the fields in both test sites was sampled. The soils in both sites were measured mechanically and chemically. A tabulation of the measured data is presented and the sensors and operational problems associated with the measurements are discussed.

Wang, J.↗

NASA NTRS1984

Real Surface Effects in Elastohydrodynamic Lubrication

Following a general discussion of real effects in EHL, consideration is given in detail to the role played by stochastic roughness superimposed on the nominal solid boundaries. Particular attention is given to the full-film EHL regime where incipient asperity contact bears a negligible fraction of the load. Flow, from which an averaged Reynolds equation can be formed, is nonetheless modified by the amplitude and texture of the roughness patterns. In describing these effects by means of certain well-defined flow factors, it is found that only two extra parameters are needed - the rms surface height and the ratio of the correlation lengths in the two principal roughness directions. In a lowest order perturbation expansion of these flow factors in powers of the ratio of rms roughness to nominal film thickness, no other properties of the roughness appear. In most cases of practical interest, the factors describing Poiseuille flow are separable into the sum of two single-surface flow factors which means that a combination of a single equivalent rough surface versus an ideal smooth surface can always be found. For flow entrained by slip velocity the factors separate instead into a difference of single-surface factors and it becomes significant which of the two surfaces carries the equivalent roughness. Results are discussed of some applications of the averaged Reynolds equation based on the flow factor method to the EHL line contact problem. Finally, the partial EHL regime is considered where comparable load fractions are carried by the hydrodynamic film and by incipient mechanical contact. An extension of the method into this regime by combining it with asperity contact models appears most encouraging.

John H Tripp↗

NASA NTRS1984

Preliminary results of albedo correlation between Europa and Ganymede

Building on the work of Johnson et al (1982) on the multispectral properties of the icy Galilean satellites, Voyager images of Europa and Ganymede were analyzed to determine values for the exponent k of the Minnaert photometric function and preliminary spectra for various regions on the two satellites. The study showed that the k values for the Minnaert function for Ganymede and Europa are different and thus that the photometric behavior of the two bodies is different. This lends evidence to the idea that the physical nature of the surfaces of Ganymede and Europa are dissimilar. It should be noted that the many factors such as texture and roughness, not taken into account in the Minnaert equation, have an effect on the photometric function. Thus, while the spectra do not rule out similar materials occurring on Europa and Ganymede, they do not contribute any evidence to that possibility.

Yuter, S. E.↗

NASA NTRS1984

Aggregating available soil water holding capacity data for crop yield models

The total amount of water available to plants that is held against gravity in a soil is usually estimated as the amount present at -0.03 MPa average water potential minus the amount present at -1.5 MPa water potential. This value, designated available water-holding capacity (AWHC), is a very important soil characteristic that is strongly and positively correlated to the inherent productivity of soils. In various applications, including assessing soil moisture status over large areas, it is necessary to group soil types or series as to their productivity. Current methods to classify AWHC of soils consider only total capacity of soil profiles and thus may group together soils which differ greatly in AWHC as a function of depth in the profile. A general approach for evaluating quantitatively the multidimensional nature of AWHC in soils is described. Data for 902 soil profiles, representing 184 soil series, in Indiana were obtained from the Soil Characterization Laboratory at Purdue University. The AWHC for each of ten 150-mm layers in each soil was established, based on soil texture and parent material. A multivariate clustering procedure was used to classify each soil profile into one of 4, 8, or 12 classes based upon ten-dimensional AWHC values. The optimum number of classes depends on the range of AWHC in the population of oil profiles analyzed and on the sensitivity of a crop to differences in distribution of water within the soil profile.

Seubert, C. E.↗

NASA NTRS1984

Age discrimination among basalt flows using digitally enhanced LANDSAT imagery

Digitally enhanced LANDSAT MSS data were used to discriminate among basalt flows of historical to Tertiary age, at a test site in Northwestern Saudi Arabia. Spectral signatures compared favorably with a field-defined classification that permits discrimination among five groups of basalt flows on the basis of geomorphic criteria. Characteristics that contributed to age definition include: surface texture, weathering, color, drainage evolution, and khabrah development. The inherent gradation in the evolution of geomorphic parameters, however, makes visual extrapolation between areas subjective. Therefore, incorporation of spectrally-derived volcanic units into the mapping process should produce more quantitatively consistent age groupings.

Blodget, H. W.↗

NASA NTRS1984

The NASA photovoltaic technology program

The NASA Office of Aeronautical and Space Technology OAST Program in space photovoltaics is reviewed. From the perspective of national landmark mission requirements and five year and 25-year long range plans, the texture of the program is revealed. Planar silicon and concentrator GaAs array technology advances are discussed. Advances in lightweight (50 micro cell) arrays and radiation tolerance research are presented. Recent progress in cascade cells and ultralightweight GaAs planar cells is noted. Progress in raising silicon cell voltage to its theoretical maximum is detailed. Advanced concepts such as plasmon converters and the Long Duration Exposure Facility LDEF flight experiments pertaining to solar cell and array technology are also shown.

Mullin, J. P.↗

NASA NTRS1984

Excimer laser annealing to fabricate low cost solar cells

The objective is to show whether or not pulsed excimer laser annealing (PELA) of ion-implanted junctions is a cost effective replacement for diffused junctions in fabricating crystalline silicon solar cells. The preliminary economic analysis completed shows that the use of PELA to fabricate both the front junction and back surface field (BSF) would cost approximately 35 cents per peak watt (Wp), compared to a cost of 15 cents/Wp for diffusion, aluminum BSF and an extra cleaning step in the baseline process. The cost advantage of the PELA process depends on improving the average cell efficiency from 14% to 16%, which would lower the overall cost of the module by about 15 cents/Wp. An optimized PELA process compatible with commercial production is to be developed, and increased cell efficiency with sufficient product for adequate statistical analysis demonstrated. An excimer laser annealing station was set-up and made operational. The first experiment used 248 nm radiation to anneal phosphorus implants in polished and texture-etched silicon.

Source record↗

NASA NTRS1983

Computer analysis of X-band radar data

The effectiveness of using currently available computer techniques for interpretation of MSS data to interpret SAR imagery for forest monitoring was assessed. Data were gathered with NASA's airborne APQ-102 dual-polarized, X-band SAR in a flight at 60,000 ft. Microdensitometry was employed to digitize the HH- and HV-polarized imagery. A ground spatial resolution of 15 m was obtained, control points were identified, a second order biquadratic transformation was applied to compensate for orientation, and rms errors were calculated. A second data set was taken with 30 m resolution in order to simulate thematic mapper operation. Classification was performed with pixel-by-pixel and textural classification algorithms. A statistical analysis was also carried out to find any significant differences between classifiers in a data set for a given classifier. Each polarization featured an independent distortion which required appropriate preprocessing to correct. Further studies are recommended with multiple frequencies viewing and multiple polarizations and look angles to define the actual forest classifications that can be made with the SAR imagery.

Knowlton, D. J.↗