Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Time-Domain Extreme-Ultraviolet Diffuse Scattering Spectroscopy of Nanoscale Surface Phonons

Here, we report the observation of dynamic fringe patterns in the diffuse scattering of extreme ultraviolet light from surfaces, following femtosecond optical excitation. At each point on the detector, the diffuse scattering intensity exhibits oscillations at well-defined frequencies that correspond to surface phonons with wave vectors determined by the scattering geometry, indicating that the optical excitation generates coherent surface phonons propagating in all directions and spanning a wavelength range from 60 to 300 nm. This phenomenon is observed on a variety of samples, including single-layer and multilayer metal films, as well as bulk semiconductors. The measured surface phonon dispersions show good agreement with theoretical calculations. By comparing signal amplitudes from samples with different surface morphologies, we find that the excitation mechanism is linked to the natural surface roughness of the samples. However, the signal is still detectable on extremely smooth surfaces with subnanometer roughness. Our findings demonstrate a simple and effective method for optically exciting coherent surface phonons with nanoscale wavelengths on a wide range of solid samples and establish a foundation for surface phonon spectroscopy in a wave vector range well beyond the limit of conventional surface Brillouin scattering.

Capotondi, F. [Elettra-Sincrotrone Trieste (Italy)↗
NASA NTRS1981

Characterization of metal-polymer boundaries using Stoneley and Leaky waves

Optical and acoustooptical techniques for bonded surface inspection and interface wave detection are discussed. Interface wave propagation models based on viscous, elastic, and viscoelastic mechanical properties are reviewed. Gross boundary anomalies such as large defects and localized disbond regions were measured using conventional high frequency pulse echo and pitch catch ultratechniques. Bond durabilty is estimated by comparing detected wave attenuation versus frequency as a function of prebond surface preparation with the experimental limit obtained for perfect welded contact. Sensitivity of interface acoustic field periodicity to both residual and dc applied stress at the boundary surface is observed as well as hysteresis due to viscoelastic polymeric behavior as the applied stress is cycled.

Claus, R. O.↗
NASA NTRS1999

Sea Surface Slope Statistics for Intermediate and Shore Scale Ocean Waves Measured Using a Low-Altitude Aircraft

Ocean surface remote sensing techniques often rely on scattering or emission linked to shorter- scale gravity-capillary ocean wavelets. However, it is increasingly apparent that slightly longer wavelengths of O(10 to 500 cm) are vital components in the robust sea surface description needed to link varied global remote sensing data sets. This paper describes a sensor suite developed to examine sea surface slope variations in the field using an aircraft flying at very low altitude (below 30 m) and will also provide preliminary measurements detailing changes in slope characteristics versus sea state and friction velocity. Two-dimensional surface slope is measured using simultaneous range measurements from three compact short-range laser altimeters mounted in an equilateral triangle arrangement with spacing of about 1 m. In addition, all three lasers provide independent wave elevation profiles after GPS-aided correction for aircraft altitude. Laser range precision is 1 cm rms while vertical motion correction is 15 cm rms. The measurements are made along-track at approximately 1 m intervals setting the spatial scale of the measurement to cover waves of intermediate to long scale. Products available for this array then include surface elevation, two-dimensional slope distribution, and the cross- and along-track 1-D slope distributions. To complement the laser, a down-looking mm-wave radar scatterometer is centered within the laser array to measure radar backscatter simultaneously with the laser slope. The radar's footprint is nominally 1 m in diameter. Near-vertical radar backscatter is inversely proportional to the small-scale surface slope variance and to the tilt of the underlying (laser-measured) surface facet. Together the laser and radar data provide information on wave roughness from the longest scales down to about 1 cm. These measurements are complemented by aircraft turbulence probe data that provides robust surface flux information.

Vandemack, Douglas↗
DOE OSTI2020

Ultrasonic waves from radial mode excitation of a piezoelectric disc on the surface of an elastic solid

In this work, we discuss the ultrasonic wave propagation characteristics in an isotropic elastic solid due to the radial mode excitation of a piezoelectric disc actuator bonded to its surface. Finite element simulations using coupled electromechanical modeling is employed to investigate the wave propagation behavior. We find that the radial mode vibrations on the surface of the elastic solid generates all the three types of ultrasonic waves: longitudinal, shear, and surface waves. The waves in the solid are comprised of a central lobe and multiple side lobes based on the frequency of the radial mode excitation. The central lobe is predominantly composed of longitudinal waves and the side lobes are composed of shear waves. While the longitudinal waves have a strong central lobe and weak side lobes that are not fully developed, shear waves consists of fully developed side lobes. In addition, we observe that the longitudinal waves have fewer side lobes inside the solid compared to the shear waves. A semi-analytical approach is presented to explain the above observations. The interface traction boundary condition between the piezoelectric disc and the elastic solid is approximated as a truncated 'Bessel' excitation over the area of the piezoelectric disc in contact with the solid. A Fourier–Bessel series expansion technique is used to investigate the wave propagation behavior from the above traction boundary condition. The results obtained explain the observations from the finite element simulations with regard to the number and distribution of side lobes pertaining to the longitudinal and shear waves generated from the radial modes of the piezoelectric disc. The proposed semi-analytical approach is general and can be applied to any arbitrary axisymmetric excitations on the surface of an elastic solid.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spatially quasi-periodic bifurcations from periodic traveling water waves and a method for detecting bifurcations using signed singular values

We present a method of detecting bifurcations by locating zeros of a signed version of the smallest singular value of the Jacobian. This enables the use of quadratically convergent root-bracketing techniques or Chebyshev interpolation to locate bifurcation points. Only positive singular values have to be computed, though the method relies on the existence of an analytic or smooth singular value decomposition (SVD). The sign of the determinant of the Jacobian, computed as part of the bidiagonal reduction in the SVD algorithm, eliminates slope discontinuities at the zeros of the smallest singular value. We use the method to search for spatially quasi-periodic traveling water waves that bifurcate from large-amplitude periodic waves. The water wave equations are formulated in a conformal mapping framework to facilitate the computation of the quasi-periodic Dirichlet-Neumann operator. We find examples of pure gravity waves with zero surface tension and overhanging gravity-capillary waves. In both cases, the waves have two spatial quasi-periods whose ratio is irrational. We follow the secondary branches via numerical continuation beyond the realm of linearization about solutions on the primary branch to obtain traveling water waves that extend over the real line with no two crests or troughs of exactly the same shape. The pure gravity wave problem is of relevance to ocean waves, where capillary effects can be neglected. Such waves can only exist through secondary bifurcation as they do not persist to zero amplitude. The gravity-capillary wave problem demonstrates the effectiveness of using the signed smallest singular value as a test function for multi-parameter bifurcation problems. This test function becomes mesh independent once the mesh is fine enough.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1972

Strength and compressibility of returned lunar soil.

Two oedometer and three direct shear tests have been performed in vacuum on a 200 g sample of lunar soil from Apollo 12 (12001, 119). The compressibility data have been used to calculate bulk density and shear wave velocity versus depth on the lunar surface. The shear wave velocity was found to increase approximately with the one-fourth power of the depth, and the results suggest that the Apollo 14 Active Seismic Experiment may not have detected the Fra Mauro formation at a depth of 8.5 m, but only naturally consolidated lunar soil. The shear data indicate that the strength of the lunar soil sample is about 65% that of a ground basalt simulant at the same void ratio.

Carrier, W. D., III↗
NASA NTRS1973

Possible explanation for nonthermal radio noise from binary stars.

Radio emission from the binary stars alpha-Sco, beta-Per, and beta-Lyr is interpreted as due to the mass exchange between the components. The electrons in the inflowing stream excite plasma waves near the surface of the receptor star, and these waves generate radio emission. Crude predictions of radio frequency, intensity, and timescales of variation seem compatible with current observations.

Jones, T. W.↗
NASA NTRS1975

Application of monochromatic ocean wave forecasts to prediction of wave-induced currents

The use of monochromatic wind-wave forecasts in prediction of wind-wave-induced currents was assessed. Currents were computed for selected combinations of wind conditions by using a spectrum approach which was developed by using the Bretschneider wave spectrum for partially developed wind seas. These currents were compared with currents computed by using the significant and average monochromatic wave parameters related to the Bretschneider spectrum. Results indicate that forecasts of significant wave parameters can be used to predict surface wind-wave-induced currents. Conversion of these parameters to average wave parameters can furnish reasonable estimates of subsurface current values.

Poole, L. R.↗
NASA NTRS1998

Seasonal Evolution of Rossby and Gravity Wave Induced Laminae in Ozonesonde Data Obtained from Wallops Island, Virginia

A method for evaluating the seasonal evolution of ozone laminae using ozonesonde data is discussed. The method uses the correlation between small-scale ozone and potential temperature variations to distinguish between laminae generated by quasi-isentropic filamentation by Rossby waves and by vertical displacements of material surfaces by gravity waves. Data from Wallops Island, Virginia show that Rossby wave induced ozone laminae are most frequently encountered at Wallops during the winter months near 15 km while statistically significant gravity wave induced laminae occur above 15 km during the early winter and at the tropopause from late winter through early spring.

Pierce, R. Bradley↗
NASA NTRS1955

Effect of surface roughness on characteristics of spherical shock waves

An investigation has been conducted on a small-scale test layout in which direct observation of the shock wave movement with time could be made in order to determine the effects of surface roughness on the characteristics of spherical shock waves. Data were obtained with 15-gram pentolite charges at four heights of burst, both for a smooth surface and for a surface completely covered with pyramid-shaped roughness elements. The observations resulted in determinations of shock peak overpressure and Mach stem height as a function of distance for each test. Comparison of the smooth-surface data with those obtained for the extremely rough condition showed a small net effort of roughness on the shock peak overpressures at the surface for all burst heights, the effect being to lower the overpressures. The effect of surface roughness on the Mach stem formation and growth was to delay the formation at the greatest charge height and to lower the height of the Mach stem for all heights.Comparison of the free-air shock peak overpressures with larger scale data showed good similarity of the overpressure-distance relationships. The data did not fit a geometrical similarity parameter for the path of the triple point at different heights of burst suggested by other investigators. A simple similarity parameter (relating the horizontal distance to the theoretical point of Mach formation) was found which showed only a small influence of burst height on the path of the triple point. While the data presented provide knowledge of the effect of many surface-roughness elements on the overall shock characteristics, the data do not provide insight into the details of the air-flow characteristics along the surface, nor the relative contribution of individual roughness elements to the results obtained.

Huber, Paul W↗
NASA NTRS1983

Wave scattering and guidance by dielectric waveguides with periodic surfaces

The extended-boundary-condition method is used to solve the wave scattering and guidance by a stratified medium with a periodic surface. First, the transition matrix for two sets of Flocquet waves incident from above and below a periodic surface separating the two media is derived. The results are applied to the diffraction of an incident plane wave by a multilayered medium having a periodic surface. The theoretical results can easily be applied to the guidance problem for which the complex guiding constant of the periodic structure is obtained. Numerical results for both the scattering and the guidance problems are obtained. The theory is compared with experiment for metallic gratings with surface-plasmon excitations. The calculated guiding constants of a thin film with a periodic sinusoidal surface are also compared with other numerical methods.

Chuang, S. L.↗
NASA NTRS1987

Sound propagation over uneven ground and irregular topography

The acoustic impedance of the surface coverings used in the laboratory experiments on sound diffraction by topographical ridges was determined. The model, which was developed, takes into account full wave effects and the possibility of surface waves and predicts the sound pressure level at the receiver location relative to what would be expected if the flat surface were not present. The sound pressure level can be regarded as a function of frequency, sound speed in air, heights of source and receiver, and horizontal distance from source to receiver, as well as the real and imaginary parts of the surface impedance.

Berthelot, Yves H.↗
DOE OSTI2020

Acoustoelectric drag current in vanadium oxide films

Two different Mott insulator wires, vanadium dioxide and vanadium sesquioxide, were prepared on the piezoelectric LiNbO 3 substrates. Coupling of acoustic waves propagating in LiNbO 3 with free carriers in vanadium oxide gives rise to the acoustoelectric effect that manifests itself as the generation of direct electric current by the acoustic wave. According to a phenomenological model, the value of the effect strongly depends on the wires conductivity, which, for the vanadium-oxide films, changes by a few orders of magnitude. We demonstrated that this yields a significant enhancement of the direct current (DC) current generated in the wires at the metal–insulator transition temperatures. The sign of the generated DC voltage is different for excitations by surface and bulk acoustic wave modes, which may happen due to reverse wave propagation at the substrate surface. For each resonance mode, polarities of the generated DC signal are the same in both wires, despite the signs of charge carriers being different for these materials. It was shown that two complementary techniques (acoustoelectric and Hall effect measurements) yield opposite signs of charge carriers in VO 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1966

Acoustic Kjeldaas edge in potassium.

Kjeldaas absorption edge in cryogenic potassium for shear magnetoacoustic wave propagation in spherical metallic Fermi surface with spin density wave ground state

SHEAR DISTURBANCE↗
NASA NTRS2022

Rapid Conjugate Appearance of the Giant Ionospheric Lamb Wave Signatures in the Northern Hemisphere After Hunga-Tonga Volcano Eruptions

The explosive eruption of the Hunga-Tonga volcano in the southwest Pacific at 0415UT on 15 January 2022 triggered gigantic atmospheric disturbances with surface air pressure waves propagating around the globe in Lamb mode. In space, concentric traveling ionosphere disturbances (CTIDs) are also observed as a manifestation of air pressure waves in New Zealand ∼0500UT and Australia ∼0630UT. As soon as the air pressure waves reached central Australia ∼0800UT, conjugate CTIDs appeared almost simultaneously in the northern hemispheres through interhemispheric coupling, much earlier than the arrival of the surface air pressure waves to Japan after 1100UT. Combining observations over Australia and Japan between 0800 and 1000UT, both direct and conjugate CTIDs show similar horizontal phase velocities of 320–390 m/s, matching with the dispersion relation of Lamb mode. The arrival of atmospheric Lamb wave to Japan later created in situ CTIDs showing the same Lamb mode characteristics as the earlier conjugate CTIDs.

Concentric traveling ionospheric disturbances↗