Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Evaluating tantalum oxide stoichiometry and oxidation states for optimal memristor performance

Tantalum oxide has shown promising electrical switching characteristics for memristor devices. Consequently, a number of reports have investigated the electrical behavior of TaO{sub x} thin films. Some effort has been made to characterize the composition of the TaO{sub x} films and it is known that there must be an optimal stoichiometry of TaO{sub x} where forming and switching behavior are optimized. However, many previous reports lack details on the methodology used for identifying the chemistry of the films. X-ray photoelectron spectroscopy has been the most commonly used technique; however, peak fitting routines vary widely among reports and a native surface oxide of Ta{sub 2}O{sub 5} often confounds the analysis. In this report a series of large area TaO{sub x} films were deposited via sputtering with controlled O{sub 2} partial pressures in the sputtering gas, resulting in tunable oxide compositions. Spectra from numerous samples from each wafer spanning a range of oxide stoichiometries were used to develop a highly constrained peak fitting routine. This procedure allowed for the composition of the TaO{sub x} films to be identified with greater detail than elemental ratios alone. Additionally, the peak fitting routine was used to evaluate uniformity of deposition across individual wafers. The appearance of a greater contribution of Ta{sup 4+} oxidation states in the oxygen starved films are believed to relate to films with optimal forming characteristics.

36 MATERIALS SCIENCE↗

Description of Continuum Spectrum States of Light Nuclei in the Shell Model

The SS-HORSE method is applied to describe the scattering of nucleons by light nuclei based on calculations within the No-Core Shell Model with JISP16 and Daejeon16 NN interactions. The resonant states in {sup 5}He, {sup 5}Li, and {sup 7}He nuclei have been investigated. The SS-HORSE method generalized to the case of the democratic decay is also applied to study a four-neutron system (tetraneutron). The calculations with JISP16 and Daejeon16 and with chiral NN interactions indicate the existence of a rather narrow low-energy tetraneutron resonance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Low-Rank Multigrid Method for the Stochastic Steady-State Diffusion Problem

We study a multigrid method for solving large linear systems of equations with tensor product structure here. Such systems are obtained from stochastic finite element discretization of stochastic partial differential equations such as the steady-state diffusion problem with random coefficients. When the variance in the problem is not too large, the solution can be well approximated by a low-rank object. In the proposed multigrid algorithm, the matrix iterates are truncated to low rank to reduce memory requirements and computational effort. The technique is proved convergent with an analytic error bound. Numerical experiments show its effectiveness in solving the Galerkin systems compared to the original multigrid solver, especially when the number of degrees of freedom associated with the spatial discretization is large.

97 MATHEMATICS AND COMPUTING↗

Search for pair-produced massive coloured scalars in four-jet final states with the ATLAS detector in proton–proton collisions at $\sqrt{s} = 7\ \mbox{TeV}$

A search for pair-produced massive coloured scalar particles decaying to a four-jet final state is performed by the ATLAS experiment at the LHC in proton–proton collisions at √s = 7 TeV. The analysed data sample corresponds to an integrated luminosity of 4.6 fb -1 . No deviation from the Standard Model is observed in the invariant mass spectrum of the two-jet pairs. A limit on the scalar gluon pair production cross section of 70 pb (10 pb) is obtained at the 95 % confidence level for a scalar gluon mass of 150 GeV (350 GeV). Lastly, interpreting these results as mass limits on scalar gluons, masses ranging from 150 GeV to 287 GeV are excluded at the 95 % confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for resonant diboson production in the $\mathrm {\ell \ell }q\bar{q}$ final state in $pp$ collisions at $\sqrt{s} = 8$ TeV with the ATLAS detector

This study reports on a search for narrow resonances in diboson production in the ℓℓqq¯ final state using pp collision data corresponding to an integrated luminosity of 20 fb –1 collected at √s=8 TeV with the ATLAS detector at the Large Hadron Collider. No significant excess of data events over the Standard Model expectation is observed. Upper limits at the 95 % confidence level are set on the production cross section times branching ratio for Kaluza–Klein gravitons predicted by the Randall–Sundrum model and for Extended Gauge Model W' bosons. These results lead to the exclusion of mass values below 740 and 1590 GeV for the graviton and W' boson respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for new phenomena in different-flavour high-mass dilepton final states in $pp$ collisions at $\sqrt{s}=13$ Tev with the ATLAS detector

A search is performed for a heavy particle decaying into different flavour dilepton pairs (eμ, eτ or μτ), using 3.2 fb -1 of proton–proton collision data at $\sqrt{s}=13$ TeV collected in 2015 by the ATLAS detector at the Large Hadron Collider. No excess over the Standard Model prediction is observed. Limits at the 95 % credibility level are set on the mass of a Z' boson with lepton-flavour-violating couplings at 3.0, 2.7 and 2.6 TeV, and on the mass of a supersymmetric τ sneutrino with R-parity-violating couplings at 2.3, 2.2 and 1.9 TeV, for eμ, eτ and μτ final states, respectively. The results are also interpreted as limits on the threshold mass for quantum black hole production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of jet activity produced in top-quark events with an electron, a muon and two b -tagged jets in the final state in pp collisions at √s = 13 TeV with the ATLAS detector

Measurements of jet activity in top-quark pair events produced in proton–proton collisions are presented, using 3.2 fb –1 of pp collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS experiment at the Large Hadron Collider. Events are chosen by requiring an opposite-charge eμ pair and two b-tagged jets in the final state. The normalised differential cross-sections of top-quark pair production are presented as functions of additional-jet multiplicity and transverse momentum, p T . The fraction of signal events that do not contain additional jet activity in a given rapidity region, the gap fraction, is measured as a function of the p T threshold for additional jets, and is also presented for different invariant mass regions of the eμbb¯ system. All measurements are corrected for detector effects and presented as particle-level distributions compared to predictions with different theoretical approaches for QCD radiation. While the kinematics of the jets from top-quark decays are described well, the generators show differing levels of agreement with the measurements of observables that depend on the production of additional jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for dark matter at $\sqrt{s}=13~\mathrm{TeV}$ TeV in final states containing an energetic photon and large missing transverse momentum with the ATLAS detector

Results of a search for physics beyond the Standard Model in events containing an energetic photon and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. As the number of events observed in data, corresponding to an integrated luminosity of 36.1 fb –1 of proton–proton collisions at a centre-of-mass energy of 13 TeV, is in agreement with the Standard Model expectations, model-independent limits are set on the fiducial cross section for the production of events in this final state. Exclusion limits are also placed in models where dark-matter candidates are pair-produced. For dark-matter production via an axial-vector or a vector mediator in the s-channel, this search excludes mediator masses below 750–1200 GeV for dark-matter candidate masses below 230–480 GeV at 95% confidence level, depending on the couplings. In an effective theory of dark-matter production, the limits restrict the value of the suppression scale M * to be above 790 GeV at 95% confidence level. A limit is also reported on the production of a high-mass scalar resonance by processes beyond the Standard Model, in which the resonance decays to Zγ and the Z boson subsequently decays into neutrinos.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of inclusive and differential fiducial cross-sections of $t\bar{t}\gamma $ production in leptonic final states at $\sqrt{s}=13~\text {TeV}$ TeV in ATLAS

Inclusive and differential cross-sections for the production of a top-quark pair in association with a photon are measured with proton-proton collision data corresponding to an integrated luminosity of 36.1 fb –1 , collected by the ATLAS detector at the LHC in 2015 and 2016 at a centre-of-mass energy of 13 TeV. The measurements are performed in single-lepton and dilepton final states in a fiducial volume. Events with exactly one photon, one or two leptons, a channel-dependent minimum number of jets, and at least one b-jet are selected. Neural network algorithms are used to separate the signal from the backgrounds. The fiducial cross-sections are measured to be 521 ± 9(stat.) ± 41(sys.) fb and 69 ± 3(stat.) ± 4(sys.) fb for the single-lepton and dilepton channels, respectively. The differential cross-sections are measured as a function of photon transverse momentum, photon absolute pseudorapidity, and angular distance between the photon and its closest lepton in both channels, as well as azimuthal opening angle and absolute pseudorapidity difference between the two leptons in the dilepton channel. All measurements are in agreement with the theoretical predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Toward All-Solid-State Lithium Batteries: Three-Dimensional Visualization of Lithium Migration in β-Li 3 PS 4 Ceramic Electrolyte

All-solid lithium batteries are an attractive next-generation technology that use ion-conducting solids such as ..beta..-Li3PS4 (LPS) to enable use of a lithium metal anode, which increases theoretical capacity and widens the stable voltage window over traditional lithium-ion systems. These ion-conductive solids also provide increased safety by replacing flammable liquid electrolytes. Although solid-state electrolytes are significantly more stable and dendrite-resistant than traditional liquid electrolytes, lithium anodes in all-solid systems may nevertheless grow dendrites under high stress or repeated cycling, leading to short circuits and premature battery breakdown. For this reason, we study the formation and propagation of Li metal features within solid electrolytes using synchrotron-based X-ray tomography with in-situ current-voltage cycling supported by our custom sample platform. Our results demonstrate the ability of this technique to delineate different layers of the Li/LPS/Li structure with spatial resolution approaching 1 um. At this resolution, we are able to detect expansion of voids, especially in early stages of cycling. This expansion of voids is observed throughout the volume of the symmetric cells and visually resembles propagation of cracks resulting from interactions between the Li metal and pre-existing voids in the LPS electrolyte.

25 ENERGY STORAGE↗

International Training Course on Implementing State Systems of Accounting for and Control (SSAC) of Nuclear Material for States with Small Quantity Protocols (SQP): Course Overview and Objectives [Slides]

This course is hosted by Los Alamos National Laboratory on behalf of the U.S. National Nuclear Security Administration (NNSA) in collaboration with the IAEA to support Member States in managing small quantities of nuclear and radioactive materials in a manner that is compliant with their international obligations.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

State Clean Energy Policies Analysis. State, Utility, and Municipal Loan Programs

This report relies on six in-depth interviews with loan program administrators to provide descriptions of existing programs. Findings from the interviews are combined with a review of relevant literature to elicit best practices and lessons learned from existing loan programs. Data collected from each of the loan programs profiled are used to quantify the impacts of these specific loan programs on the commonly cited, overarching state clean energy goals of energy security, economic development, and environmental protection.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Sustainable Aviation Fuel (SAF) State-of-Industry Report: State of SAF Production Process

GHG emissions related to commercial air travel were already significant, at 10% of the domestic transportation emissions and 3% of the global greenhouse gas emissions prior to the pandemic, and are expected to double by 2050, even with modest projected growth in air travel. Since Sustainable Aviation Fuel (SAF) is the only way that medium to long haul commercial aviation can be decarbonized, a US government wide "SAF Grand Challenge" was issued to encourage industry to develop capabilities to produce SAF, to reduce cost, improve sustainability, build value chains, and to scale production capabilities (1). The targets are to expand current domestic SAF 2022 production by 200X to 3 billion gallons per year by 2030, and then further by 12X to 35 billion gallons by 2050, while achieving life cycle GHG reduction of 50% relative to fossil Jet A. Following the SAF Grand Challenge, the DOE, USDA, EPA and FAA collaboratively developed a comprehensive strategy, outlined in the "SAF Grand Challenge Roadmap" (2), to inform stakeholders of the actions necessary to achieve the above volumetric targets. The purpose of this study is to provide an assessment of the current state of the SAF production industry and identify challenges and hurdles that industry may face in delivering the 2030 goals. This assessment is for the potential feedstocks and conversion pathways expected to contribute to 2030 goals and will generally follow action areas in the SAF Grand Challenge: feedstocks, conversion technology, supply chain, and policy & valuation.

09 BIOMASS FUELS↗