Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Subspace-based Background Subtraction Applied to Aeroacoustic Wind Tunnel Testing

A subspace-based form of background subtraction is presented and applied to aeroacoustic wind tunnel data. A variant of this method has seen use in other fields such as climatology and medical imaging. The technique is based on an eigenvalue decomposition of the background noise cross-spectral matrix. Simulated results indicate similar performance to conventional background subtraction when the subtracted spectra are weaker than the true contaminating background levels. Superior performance is observed when the subtracted spectra are stronger than the true contaminating background levels, and when background data do not match between measurements. Experimental results show limited success in recovering signal behavior for data in which conventional background subtraction fails. The results also demonstrate the subspace subtraction technique's ability to maintain a physical coherence relationship in the modified cross-spectral matrix. Deconvolution results from microphone phased array data indicate that array integration methods are largely insensitive to subtraction type, and that background subtraction with appropriate background data is an effective alternative to diagonal removal.

deconvolution↗
NASA NTRS1993

A strategy for the efficient simulation of viscous compressible flows using a multi-domain pseudospectral method

The viscous compressible flow in a quasi-1D nozzle is presently simulated by means of a novel multidomain pseudospectral method in which interface-point flow variables are advanced in time on the basis of the second-order time-marching scheme used for the interior points. A spectrally accurate modification of Van Leer's (1982) flux-vector flux-splitting method is used to evaluate the spatial derivatives of the inviscid flux vector; these derivatives are alternately evaluated from neighboring subdomains, and the scheme is found to be spectrally accurate and to resolve shock waves without oscillations.

Hanley, Patrick↗
NASA NTRS1973

Signature extension techniques applied to multispectral scanner data.

Review of a number of spectral radiance signature extension techniques based on the concept of preprocessing the data to reduce the effects due to atmospheric effects, scanner look angle, etc. One of the promising methods studied to date involves using a ratio preprocessing transformation wherein the signals generated in adjacent spectral bands are ratioed on a point-by-point basis prior to classification. This method is easily and efficiently implemented and tests to date have yielded excellent results. Signatures have been successfully extended over 100+ miles, four days, different times of day, and very different atmospheric conditions.

Nalepka, R. F.↗
NASA NTRS2009

Spatial Modulation Improves Performance in CTIS

Suitably formulated spatial modulation of a scene imaged by a computed-tomography imaging spectrometer (CTIS) has been found to be useful as a means of improving the imaging performance of the CTIS. As used here, "spatial modulation" signifies the imposition of additional, artificial structure on a scene from within the CTIS optics. The basic principles of a CTIS were described in "Improvements in Computed- Tomography Imaging Spectrometry" (NPO-20561) NASA Tech Briefs, Vol. 24, No. 12 (December 2000), page 38 and "All-Reflective Computed-Tomography Imaging Spectrometers" (NPO-20836), NASA Tech Briefs, Vol. 26, No. 11 (November 2002), page 7a. To recapitulate: A CTIS offers capabilities for imaging a scene with spatial, spectral, and temporal resolution. The spectral disperser in a CTIS is a two-dimensional diffraction grating. It is positioned between two relay lenses (or on one of two relay mirrors) in a video imaging system. If the disperser were removed, the system would produce ordinary images of the scene in its field of view. In the presence of the grating, the image on the focal plane of the system contains both spectral and spatial information because the multiple diffraction orders of the grating give rise to multiple, spectrally dispersed images of the scene. By use of algorithms adapted from computed tomography, the image on the focal plane can be processed into an image cube a three-dimensional collection of data on the image intensity as a function of the two spatial dimensions (x and y) in the scene and of wavelength (lambda). Thus, both spectrally and spatially resolved information on the scene at a given instant of time can be obtained, without scanning, from a single snapshot; this is what makes the CTIS such a potentially powerful tool for spatially, spectrally, and temporally resolved imaging. A CTIS performs poorly in imaging some types of scenes in particular, scenes that contain little spatial or spectral variation. The computed spectra of such scenes tend to approximate correct values to within acceptably small errors near the edges of the field of view but to be poor approximations away from the edges. The additional structure imposed on a scene according to the present method enables the CTIS algorithms to reconstruct acceptable approximations of the spectral data throughout the scene.

Bearman, Gregory H.↗
NASA NTRS1985

The determination of the helium abundance in main-sequence B stars

It is pointed out that the abundances of deuterium, helium, and lithium provide fundamental constraints on cosmological models. The central question is related to the compatibility of the observed abundances with big bang models of primordial nucleosynthesis, taking into account a modification by subsequent nuclear processing in stars or a modification of standard models. The present paper has the objective to assess critically the feasibility of deriving accurate helium abundances from measurements of the photospheric lines in main-sequence B-type stars. A method is established for assigning atmospheric parameters to main-sequence stars with spectral types in the range (approximately) B1-B5. It is found that an analysis of stars in distant anticenter H II regions and clusters offer an alternative method which seems capable of determining relative abundances with more than the requisite accuracy.

Wolff, S. C.↗
NASA NTRS1992

The derivation of parent electron spectra from bremsstrahlung hard X-ray spectra

A numerical method is formulated to derive the spectrum of the parent electrons from the hard X-ray spectrum produced in optically thin bremsstrahlung. The method can utilize any form for the bremsstrahlung cross sections, and it provides accurate estimates of uncertainties in the derived electron spectrum based on uncertainties in the photon measurements. This method is applied to test photon spectra, as well as to hard X-ray spectra of the June 27, 1980 solar flare which was observed by high spectral resolution detectors. Future measurements with much more sensitive detectors will enable this method to be used to derive detailed, accurate flare electron spectra.

Johns, Christopher M.↗
NASA NTRS1993

Estimation of frequency offset in mobile satellite modems

In mobilesat applications, frequency offset on the received signal must be estimated and removed prior to further modem processing. A straightforward method of estimating the carrier frequency offset is to raise the received MPSK signal to the M-th power, and then estimate the location of the peak spectral component. An analysis of the lower signal to noise threshold of this method is carried out for BPSK signals. Predicted thresholds are compared to simulation results. It is shown how the method can be extended to pi/M MPSK signals. A real-time implementation of frequency offset estimation for the Australian mobile satellite system is described.

Cowley, W. G.↗
NASA NTRS1984

The core-saturation method with partial redistribution

The core-saturation technique for calculating the radiation field in spectral lines (Rybicki, 1971) is extended to cases where partial redistribution is important. The frequency space is discretized and a general vector equation relating the source function S to the mean intensities is derived. The components of S are then used in a lambda iteration to determine the specific intensities. Numerical tests show that the efficiency and accuracy of this method are maintained.

Stenholm, L. G.↗
NASA NTRS1977

Spectroscopic studies of very old hot stars. III - Atmospheric properties of seven planetary nuclei

The atmospheric properties of seven planetary nuclei which have O or Of-type spectra were determined by use of the Zanstra method and by analysis of the visual line spectra. One finding is that the O-type spectral sequence may extend to effective temperatures of 90,000 kelvins or more, if the results of the Zanstra method are to be believed. However, there are some indications of internal inconsistency in the Zanstra method and some outstanding discrepancies between the effective temperatures indicated by the Zanstra method and those indicated from analysis of the visual line spectra. Two ways to resolve these discrepancies are to postulate an excess of extreme-UV stellar flux or to postulate a hot binary companion for some central stars. In either case the validity of the Harmon-Seaton evolutionary sequence for central stars becomes questionable.

Heap, S. R.↗
NASA NTRS1979

Parameter estimation in X-ray astronomy using maximum likelihood

Methods of estimation of parameter values and confidence regions by maximum likelihood and Fisher efficient scores starting from Poisson probabilities are developed for the nonlinear spectral functions commonly encountered in X-ray astronomy. It is argued that these methods offer significant advantages over the commonly used alternatives called minimum chi-squared because they rely on less pervasive statistical approximations and so may be expected to remain valid for data of poorer quality. Extensive numerical simulations of the maximum likelihood method are reported which verify that the best-fit parameter value and confidence region calculations are correct over a wide range of input spectra.

Wachter, K.↗
NASA NTRS2013

Understanding How Kurtosis Is Transferred from Input Acceleration to Stress Response and Its Influence on Fatigue Llife

High cycle fatigue of metals typically occurs through long term exposure to time varying loads which, although modest in amplitude, give rise to microscopic cracks that can ultimately propagate to failure. The fatigue life of a component is primarily dependent on the stress amplitude response at critical failure locations. For most vibration tests, it is common to assume a Gaussian distribution of both the input acceleration and stress response. In real life, however, it is common to experience non-Gaussian acceleration input, and this can cause the response to be non-Gaussian. Examples of non-Gaussian loads include road irregularities such as potholes in the automotive world or turbulent boundary layer pressure fluctuations for the aerospace sector or more generally wind, wave or high amplitude acoustic loads. The paper first reviews some of the methods used to generate non-Gaussian excitation signals with a given power spectral density and kurtosis. The kurtosis of the response is examined once the signal is passed through a linear time invariant system. Finally an algorithm is presented that determines the output kurtosis based upon the input kurtosis, the input power spectral density and the frequency response function of the system. The algorithm is validated using numerical simulations. Direct applications of these results include improved fatigue life estimations and a method to accelerate shaker tests by generating high kurtosis, non-Gaussian drive signals.

Kihm, Frederic↗
NASA NTRS1973

Application of automated multispectral analysis to Delaware's coastal vegetation mapping

There are no author-identified significant results in this report. Overlay maps of Delaware's wetlands have been prepared, showing the dominant species or group of species of vegetation present. Five such categories of vegetation were used indicating marshes dominated by: (1) salt marsh cord grass; (2) salt marsh hay and spike grass; (3) reed grass; (4) high tide bush and sea myrtle; and (5) a group of fresh water species found in impounded areas built to attract water fowl. Fifteen such maps cover Delaware's wetlands from the Pennsylvania to the Maryland borders. The mapping technique employed utilizes the General Electric multispectral data processing system. This system is a hybrid analog-digital system designed as an analysis tool to be used by an operator whose own judgment and knowledge of ground truth can be incorporated at any time into the analyzing process. The result is a high speed, cost effective method for producing enhanced photomaps showing a number of spectral classes, each enhanced spectral class being representative of a vegetative species or group of species.

Klemas, V.↗
NASA NTRS1974

Investigation of models for large-scale meteorological prediction experiments

The feasibility of extended and long range weather prediction by physical and dynamical methods was investigated in the following research projects: (1) spectral energy balance; (2) annual cycles of surface heat balance and temperature over North America; and (3) atmospheric response to sea surface temperature anomalies.

Spar, J.↗
NASA NTRS1974

Inventory of Delaware's wetlands

A mapping technique utilizing the General Electric Multispectral Data Processing System to analyze NASA RB-57 color-infrared imagery and applied in the mapping of Delaware's wetlands is described. It is shown to represent a high-speed, cost-effective method for producing enhanced photomaps showing a number of spectral classes.

Klemas, V.↗
NASA NTRS1976

A new rapid method of solar simulator calibration

A quick method for checking solar simulator spectra content is presented. The method is based upon a solar cell of extended spectral sensitivity and known absolute response, and a dichroic mirror with the reflection transmission transition close to the peak wavelength of the Thekaekara AMO distribution. It compromises the need for spectral discrimination with the ability to integrate wide spectral regions of the distribution which was considered important due to the spiky nature of the high pressure xenon lamp in common use. The results are expressed in terms of a single number, the blue/red ratio, which, combined with the total (unfiltered) output, provides a simple adequate characterization. Measurements were conducted at eleven major facilities across the country and a total of eighteen simulators were measured including five pulsed units.

Ross, B.↗