Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sampling statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Neutrino Scattering on Glass: NuSOnG

These proceedings describe the physics goals and initial design for a new experiment: NuSOnG--Neutrino Scattering On Glass. The design will yield about two orders of magnitude higher statistics than previous high energy neutrino experiments, observed in a detector optimized for low hadronic energy and electromagnetic events. As a result, the purely weak processes {nu}{sub {mu}}+e{sup -}{yields}{nu}{sub {mu}}+e{sup -} and {nu}{sub {mu}}+e{sup -}{yields}{nu}{sub e}+{mu}{sup -} (inverse muon decay) can be measured with high accuracy for the first time. This allows important precision electroweak tests and well as direct searches for new physics. The high statistics also will yield the world's largest sample of Deep Inelastic (DIS) events for precision parton distribution studies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Conduction mechanisms in thin atomic layer deposited Al{sub 2}O{sub 3} layers

Thin Al{sub 2}O{sub 3} layers of 2–135 nm thickness deposited by thermal atomic layer deposition at 80 °C were characterized regarding the current limiting mechanisms by increasing voltage ramp stress. By analyzing the j(U)-characteristics regarding ohmic injection, space charge limited current (SCLC), Schottky-emission, Fowler-Nordheim-tunneling, and Poole-Frenkel-emission, the limiting mechanisms were identified. This was performed by rearranging and plotting the data in a linear scale, such as Schottky-plot, Poole-Frenkel-plot, and Fowler-Nordheim-plot. Linear regression then was applied to the data to extract the values of relative permittivity from Schottky-plot slope and Poole-Frenkel-plot slope. From Fowler-Nordheim-plot slope, the Fowler-Nordheim-energy-barrier was extracted. Example measurements in addition to a statistical overview of the results of all investigated samples are provided. Linear regression was applied to the region of the data that matches the realistic values most. It is concluded that ohmic injection and therefore SCLC only occurs at thicknesses below 12 nm and that the Poole-Frenkel-effect is no significant current limiting process. The extracted Fowler-Nordheim-barriers vary in the range of up to approximately 4 eV but do not show a specific trend. It is discussed whether the negative slope in the Fowler-Nordheim-plot could in some cases be a misinterpreted trap filled limit in the case of space charge limited current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Discovery of eight z ∼ 6 quasars from Pan-STARRS1

High-redshift quasars are currently the only probes of the growth of supermassive black holes and potential tracers of structure evolution at early cosmic time. Here we present our candidate selection criteria from the Panoramic Survey Telescope and Rapid Response System 1 and follow-up strategy to discover quasars in the redshift range 5.7 ≲ z ≲ 6.2. With this strategy we discovered eight new 5.7 ≤ z ≤ 6.0 quasars, increasing the number of known quasars at z > 5.7 by more than 10%. We additionally recovered 18 previously known quasars. The eight quasars presented here span a large range of luminosities (–27.3 ≤ M {sub 1450} ≤ –25.4; 19.6 ≤ z {sub P1} ≤ 21.2) and are remarkably heterogeneous in their spectral features: half of them show bright emission lines whereas the other half show a weak or no Lyα emission line (25% with rest-frame equivalent width of the Lyα +N V line lower than 15 Å). We find a larger fraction of weak-line emission quasars than in lower redshift studies. This may imply that the weak-line quasar population at the highest redshifts could be more abundant than previously thought. However, larger samples of quasars are needed to increase the statistical significance of this finding.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE INTRINSIC ALIGNMENTS OF THE LATE-TYPE SPIRAL GALAXIES FROM THE SLOAN DIGITAL SKY SURVEY DATA RELEASE 7

A robust detection of the tidally induced intrinsic alignments of the late-type spiral galaxies with high statistical significance is reported. From the spectroscopic galaxy sample of Sloan Digital Sky Survey DR7 compiled by Huertas-Company et al., which lists each galaxy's probabilities of being in five Hubble types, P(E), P(Ell), P(S0), P(Sab), P(Scd), we select the nearby large late-type spiral galaxies which have redshifts of 0 {<=} z {<=} 0.02, probabilities of P(Scd) {>=} 0.5, and angular sizes of D {>=} 7.92 arcsec. The spin axes of the selected nearby large late-type spiral galaxies are determined up to the two-fold ambiguity with the help of the circular thin-disk approximation, and their spatial correlations are measured as a function of the separation distance r. A clear signal of the intrinsic correlation as high as 3.4{sigma} and 2.4{sigma} is found at the separation distance of r {approx} 1 h{sup -1} Mpc and r {approx} 2 h{sup -1} Mpc, respectively. The comparison of this observational results with the analytic model based on the tidal torque theory reveals that the spin correlation function for the late-type spiral galaxies follows the quadratic scaling of the linear density correlation and that the intrinsic correlations of the galaxy spin axes are stronger than that of the underlying dark halos. We investigate a local density dependence of the galaxy spin correlations and found that the correlations are stronger for the galaxies located in dense regions having more than 10 neighbors within 2 h{sup -1} Mpc. We also attempt to measure a luminosity dependence of the galaxy spin correlations, but find that it is impossible with our magnitude-split samples to disentangle a luminosity from a redshift dependence. We provide the physical explanations for these observational results and also discuss the effects of possible residual systematics on the results.

79 ASTRONOMY AND ASTROPHYSICS↗

EXOZODIACAL DUST LEVELS FOR NEARBY MAIN-SEQUENCE STARS: A SURVEY WITH THE KECK INTERFEROMETER NULLER

The Keck Interferometer Nuller (KIN) was used to survey 25 nearby main-sequence stars in the mid-infrared, in order to assess the prevalence of warm circumstellar (exozodiacal) dust around nearby solar-type stars. The KIN measures circumstellar emission by spatially blocking the star but transmitting the circumstellar flux in a region typically 0.1-4 AU from the star. We find one significant detection ({eta} Crv), two marginal detections ({gamma} Oph and {alpha} Aql), and 22 clear non-detections. Using a model of our own solar system's zodiacal cloud, scaled to the luminosity of each target star, we estimate the equivalent number of target zodis needed to match our observations. Our three zodi detections are {eta} Crv (1250 {+-} 260), {gamma} Oph (200 {+-} 80), and {alpha} Aql (600 {+-} 200), where the uncertainties are 1{sigma}. The 22 non-detected targets have an ensemble weighted average consistent with zero, with an average individual uncertainty of 160 zodis (1{sigma}). These measurements represent the best limits to date on exozodi levels for a sample of nearby main-sequence stars. A statistical analysis of the population of 23 stars not previously known to contain circumstellar dust (excluding {eta} Crv and {gamma} Oph) suggests that, if the measurement errors are uncorrelated (for which we provide evidence) and if these 23 stars are representative of a single class with respect to the level of exozodi brightness, the mean exozodi level for the class is <150 zodis (3{sigma} upper limit, corresponding to 99% confidence under the additional assumption that the measurement errors are Gaussian). We also demonstrate that this conclusion is largely independent of the shape and mean level of the (unknown) true underlying exozodi distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

THE CHEMICAL ABUNDANCES OF STARS IN THE HALO (CASH) PROJECT. II. A SAMPLE OF 14 EXTREMELY METAL-POOR STARS ,

We present a comprehensive abundance analysis of 20 elements for 16 new low-metallicity stars from the Chemical Abundances of Stars in the Halo (CASH) project. The abundances have been derived from both Hobby-Eberly Telescope High Resolution Spectrograph snapshot spectra (R {approx}15, 000) and corresponding high-resolution (R {approx}35, 000) Magellan Inamori Kyocera Echelle spectra. The stars span a metallicity range from [Fe/H] from -2.9 to -3.9, including four new stars with [Fe/H] < -3.7. We find four stars to be carbon-enhanced metal-poor (CEMP) stars, confirming the trend of increasing [C/Fe] abundance ratios with decreasing metallicity. Two of these objects can be classified as CEMP-no stars, adding to the growing number of these objects at [Fe/H]< - 3. We also find four neutron-capture-enhanced stars in the sample, one of which has [Eu/Fe] of 0.8 with clear r-process signatures. These pilot sample stars are the most metal-poor ([Fe/H] {approx}< -3.0) of the brightest stars included in CASH and are used to calibrate a newly developed, automated stellar parameter and abundance determination pipeline. This code will be used for the entire {approx}500 star CASH snapshot sample. We find that the pipeline results are statistically identical for snapshot spectra when compared to a traditional, manual analysis from a high-resolution spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

CHEMICAL COMPOSITION OF COMET C/2007 N3 (LULIN): ANOTHER ''ATYPICAL'' COMET

We measured the volatile chemical composition of comet C/2007 N3 (Lulin) on three dates from 2009 January 30 to February 1 using NIRSPEC, the high-resolution ({lambda}/{Delta}{lambda} Almost-Equal-To 25,000), long-slit echelle spectrograph at Keck 2. We sampled nine primary (parent) volatile species (H{sub 2}O, C{sub 2}H{sub 6}, CH{sub 3}OH, H{sub 2}CO, CH{sub 4}, HCN, C{sub 2}H{sub 2}, NH{sub 3}, CO) and two product species (OH* and NH{sub 2}). We also report upper limits for HDO and CH{sub 3}D. C/2007 N3 (Lulin) displayed an unusual composition when compared to other comets. Based on comets measured to date, CH{sub 4} and C{sub 2}H{sub 6} exhibited 'normal' abundances relative to water, CO and HCN were only moderately depleted, C{sub 2}H{sub 2} and H{sub 2}CO were more severely depleted, and CH{sub 3}OH was significantly enriched. Comet C/2007 N3 (Lulin) is another important and unusual addition to the growing population of comets with measured parent volatile compositions, illustrating that these studies have not yet reached the level where new observations simply add another sample to a population with well-established statistics.

79 ASTRONOMY AND ASTROPHYSICS↗

THE HALO OCCUPATION DISTRIBUTION OF SDSS QUASARS

We present an estimate of the projected two-point correlation function (2PCF) of quasars in the Sloan Digital Sky Survey (SDSS) over the full range of one- and two-halo scales, 0.02 h{sup -1} Mpc < r{sub p} < 120 h{sup -1} Mpc. This was achieved by combining data from SDSS DR7 on large scales and Hennawi et al. (with appropriate statistical corrections) on small scales. Our combined clustering sample is the largest spectroscopic quasar clustering sample to date, containing {approx}48, 000 quasars in the redshift range 0.4 {approx}< z {approx}< 2.5 with median redshift 1.4. We interpret these precise 2PCF measurements within the halo occupation distribution (HOD) framework and constrain the occupation functions of central and satellite quasars in dark matter halos. In order to explain the small-scale clustering, the HOD modeling requires that a small fraction of z {approx} 1.4 quasars, f{sub sat} = (7.4 {+-} 1.4) Multiplication-Sign 10{sup -4}, be satellites in dark matter halos. At z {approx} 1.4, the median masses of the host halos of central and satellite quasars are constrained to be M{sub cen} = 4.1{sup +0.3}{sub -0.4} Multiplication-Sign 10{sup 12} h{sup -1} M{sub Sun} and M{sub sat} = 3.6{sup +0.8}{sub -1.0} Multiplication-Sign 10{sup 14} h{sup -1} M{sub Sun }, respectively. To investigate the redshift evolution of the quasar-halo relationship, we also perform HOD modeling of the projected 2PCF measured by Shen et al. for SDSS quasars with median redshift 3.2. We find tentative evidence for an increase in the mass scale of quasar host halos-the inferred median mass of halos hosting central quasars at z {approx} 3.2 is M{sub cen} = 14.1{sup +5.8}{sub -6.9} Multiplication-Sign 10{sup 12} h{sup -1} M{sub Sun }. The cutoff profiles of the mean occupation functions of central quasars reveal that quasar luminosity is more tightly correlated with halo mass at higher redshifts. The average quasar duty cycle around the median host halo mass is inferred to be f{sub q} = 7.3{sup +0.6}{sub -1.5} Multiplication-Sign 10{sup -4} at z {approx} 1.4 and f{sub q} = 8.6{sup +20.4}{sub -7.2} Multiplication-Sign 10{sup -2} at z {approx} 3.2. We discuss the implications of our results for quasar evolution and quasar-galaxy co-evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

A CRITICAL ASSESSMENT OF PHOTOMETRIC REDSHIFT METHODS: A CANDELS INVESTIGATION

We present results from the Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey (CANDELS) photometric redshift methods investigation. In this investigation, the results from 11 participants, each using a different combination of photometric redshift code, template spectral energy distributions (SEDs), and priors, are used to examine the properties of photometric redshifts applied to deep fields with broadband multi-wavelength coverage. The photometry used includes U-band through mid-infrared filters and was derived using the TFIT method. Comparing the results, we find that there is no particular code or set of template SEDs that results in significantly better photometric redshifts compared to others. However, we find that codes producing the lowest scatter and outlier fraction utilize a training sample to optimize photometric redshifts by adding zero-point offsets, template adjusting, or adding extra smoothing errors. These results therefore stress the importance of the training procedure. We find a strong dependence of the photometric redshift accuracy on the signal-to-noise ratio of the photometry. On the other hand, we find a weak dependence of the photometric redshift scatter with redshift and galaxy color. We find that most photometric redshift codes quote redshift errors (e.g., 68% confidence intervals) that are too small compared to that expected from the spectroscopic control sample. We find that all codes show a statistically significant bias in the photometric redshifts. However, the bias is in all cases smaller than the scatter; the latter therefore dominates the errors. Finally, we find that combining results from multiple codes significantly decreases the photometric redshift scatter and outlier fraction. We discuss different ways of combining data to produce accurate photometric redshifts and error estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

A test of the millisecond magnetar central engine model of gamma-ray bursts with swift data

A rapidly spinning, strongly magnetized neutron star (magnetar) has been proposed as one possible candidate of the central engine of gamma-ray bursts (GRBs). We systematically analyze the Swift/XRT light curves of long GRBs detected before 2013 August, and characterize them into four categories based on how likely they may harbor a magnetar central engine: Gold, Silver, Aluminum, and Non-magnetar. We also independently analyze the data of short GRBs with a putative magnetar central engine. We then perform a statistical study of various properties of the magnetar samples and the non-magnetar sample, and investigate whether the data are consistent with the hypothesis that there exist two types of central engines. By deriving the physical parameters of the putative magnetars, we find that the observations of the Gold and Silver samples are generally consistent with the predictions of the magnetar model. For a reasonable beaming factor for long GRBs, the derived magnetar surface magnetic field B{sub p} and initial spin period P {sub 0} fall into the reasonable range. Magnetar winds in short GRBs, on the other hand, are consistent with being isotropic. No GRB in the magnetar sample has a beam-corrected total energy exceeding the maximum energy budget defined by the initial spin energy of the magnetar, while some non-magnetar GRBs do violate such a limit. With beaming correction, on average the non-magnetar sample is more energetic and luminous than the magnetar samples. Our analysis hints that millisecond magnetars are likely operating in a good fraction, but probably not all, GRBs.

79 ASTRONOMY AND ASTROPHYSICS↗

Flexible and scalable methods for quantifying stochastic variability in the era of massive time-domain astronomical data sets

We present the use of continuous-time autoregressive moving average (CARMA) models as a method for estimating the variability features of a light curve, and in particular its power spectral density (PSD). CARMA models fully account for irregular sampling and measurement errors, making them valuable for quantifying variability, forecasting and interpolating light curves, and variability-based classification. We show that the PSD of a CARMA model can be expressed as a sum of Lorentzian functions, which makes them extremely flexible and able to model a broad range of PSDs. We present the likelihood function for light curves sampled from CARMA processes, placing them on a statistically rigorous foundation, and we present a Bayesian method to infer the probability distribution of the PSD given the measured light curve. Because calculation of the likelihood function scales linearly with the number of data points, CARMA modeling scales to current and future massive time-domain data sets. We conclude by applying our CARMA modeling approach to light curves for an X-ray binary, two active galactic nuclei, a long-period variable star, and an RR Lyrae star in order to illustrate their use, applicability, and interpretation.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetic fields and massive star formation

Massive stars (M > 8 M {sub ☉}) typically form in parsec-scale molecular clumps that collapse and fragment, leading to the birth of a cluster of stellar objects. We investigate the role of magnetic fields in this process through dust polarization at 870 μm obtained with the Submillimeter Array (SMA). The SMA observations reveal polarization at scales of ≲0.1 pc. The polarization pattern in these objects ranges from ordered hour-glass configurations to more chaotic distributions. By comparing the SMA data with the single dish data at parsec scales, we found that magnetic fields at dense core scales are either aligned within 40° of or perpendicular to the parsec-scale magnetic fields. This finding indicates that magnetic fields play an important role during the collapse and fragmentation of massive molecular clumps and the formation of dense cores. We further compare magnetic fields in dense cores with the major axis of molecular outflows. Despite a limited number of outflows, we found that the outflow axis appears to be randomly oriented with respect to the magnetic field in the core. This result suggests that at the scale of accretion disks (≲ 10{sup 3} AU), angular momentum and dynamic interactions possibly due to close binary or multiple systems dominate over magnetic fields. With this unprecedentedly large sample of massive clumps, we argue on a statistical basis that magnetic fields play an important role during the formation of dense cores at spatial scales of 0.01-0.1 pc in the context of massive star and cluster star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

SDSS DR7 WHITE DWARF CATALOG

We present a new catalog of spectroscopically confirmed white dwarf stars from the Sloan Digital Sky Survey (SDSS) Data Release 7 spectroscopic catalog. We find 20,407 white dwarf spectra, representing 19,712 stars, and provide atmospheric model fits to 14,120 DA and 1011 DB white dwarf spectra from 12,843 and 923 stars, respectively. These numbers represent more than a factor of two increase in the total number of white dwarf stars from the previous SDSS white dwarf catalogs based on DR4 data. Our distribution of subtypes varies from previous catalogs due to our more conservative, manual classifications of each star in our catalog, supplementing our automatic fits. In particular, we find a large number of magnetic white dwarf stars whose small Zeeman splittings mimic increased Stark broadening that would otherwise result in an overestimated log g if fit as a non-magnetic white dwarf. We calculate mean DA and DB masses for our clean, non-magnetic sample and find the DB mean mass is statistically larger than that for the DAs.

79 ASTRONOMY AND ASTROPHYSICS↗

Statistical analysis of the Nb 3 Sn strand production for the ITER toroidal field coils

The ITER toroidal field (TF) strand procurement initiated the largest Nb 3 Sn superconducting strand production hitherto. The industrial-scale production started in Japan in 2008 and finished in summer 2015. Six ITER partners (so-called Domestic Agencies, or DAs) are in charge of the procurement and involved eight different strand suppliers all over the world, of which four are using the bronze route (BR) process and four the internal-tin (IT) process. In total more than 500 tons have been produced including excess material covering losses during the conductor manufacturing process, in particular the cabling. The procurement is based on a functional specification where the main strand requirements like critical current, hysteresis losses, Cu ratio and residual resistance ratio are specified but not the strand production process or layout. We introduce the analysis on the data acquired during the quality control (QC) process that was carried out to ensure the same conductor performance requirements are met by the different strand suppliers regardless of strand design. The strand QC is based on 100% billet testing and on applying statistical process control (SPC) limits. Throughout the production, samples adjacent to the strand pieces tested by the suppliers are cross-checked ('verified') by their respective DAs reference labs. The level of verification was lowered from 100% at the beginning of the procurement progressively to approximately 25% during the final phase of production. Based on the complete dataset of the TF strand production, an analysis of the SPC limits of the critical strand parameters is made and the related process capability indices are calculated. In view of the large-scale production and costs, key manufacturing parameters such as billet yield, number of breakages and piece-length distribution are also discussed. Furthermore, the results are compared among all the strand suppliers, focusing on the difference between BR and IT processes. Following the completion of the largest Nb 3 Sn strand production, our experience gained from monitoring the execution of the QC activities and from auditing the results from the measurements is summarised for future superconducting strand material procurement activities.

Vostner, A.↗

Generating synthetic cosmological data with GalSampler

As part of the effort to meet the needs of the Large Synoptic Survey Telescope Dark Energy Science Collaboration (LSST DESC) for accurate, realistically complex mock galaxy catalogues, in this work we have developed galsampler, an open-source python package that assists in generating large volumes of synthetic cosmological data. The key idea behind galsampler is to recast hydrodynamical simulations and semi-analytic models as physically motivated galaxy libraries. galsampler populates a new, larger volume halo catalogue with galaxies drawn from the baseline library; by using weighted sampling guided by empirical modelling techniques, galsampler inherits statistical accuracy from the empirical model and physically motivated complexity from the baseline library. We have recently used galsampler to produce the cosmoDC 2 extragalactic catalogue made for the LSST DESC Data Challenge 2 . Using cosmoDC 2 as a guiding example, we outline how galsampler can continue to support ongoing and near-future galaxy surveys such as the Dark Energy Survey, the Dark Energy Spectroscopic Instrument, WFIRST, and Euclid.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The completed SDSS-IV extended Baryon Oscillation Spectroscopic Survey: growth rate of structure measurement from cosmic voids

ABSTRACT We present a void clustering analysis in configuration-space using the completed Sloan Digital Sky Survey IV (SDSS-IV) extended Baryon Oscillation Spectroscopic Survey (eBOSS) DR16 samples. These samples consist of Luminous Red Galaxies (LRGs) combined with the high-redshift tail of the SDSS-III Baryon Oscillation Spectroscopic Survey (BOSS) DR12 CMASS galaxies (called as LRG+CMASS sample), Emission Line Galaxies (ELGs), and quasars (QSOs). We build void catalogues from the three eBOSS DR16 samples using a ZOBOV-based algorithm, providing 2814 voids, 1801 voids, and 4347 voids in the LRG+CMASS, ELG, and QSO samples, respectively, spanning the redshift range 0.6 < z < 2.2. We measure the redshift space distortions around voids using the anisotropic void-galaxy cross-correlation function and we extract the distortion parameter β. We test the methodology on realistic simulations before applying it to the data, and we investigate all our systematic errors on these mocks. We find βLRG(z = 0.74) = 0.415 ± 0.087, βELG(z = 0.85) = 0.665 ± 0.125 and βQSO(z = 1.48) = 0.313 ± 0.134, for the LRG+CMASS, ELG, and QSO sample, respectively. The quoted errors include systematic and statistical contributions. In order to convert our measurements in terms of the growth rate fσ8, we use consensus values of linear bias from the eBOSS DR16 companion papers, resulting in the following constraints: fσ8(z = 0.74) = 0.50 ± 0.11, fσ8(z = 0.85) = 0.52 ± 0.10, and fσ8(z = 1.48) = 0.30 ± 0.13. Our measurements are consistent with other measurements from eBOSS DR16 using conventional clustering techniques.

79 ASTRONOMY AND ASTROPHYSICS↗

Asymmetric grain distribution in phthalocyanine thin films

Many electronic and optical properties of organic thin films depend on the precise morphology of grains. Iron phthalocyanine thin films are grown on sapphire substrates at different temperatures to study the effect of grain growth kinematics and to experimentally quantify the grain size distribution in organic thin films. The grain size is measured with an atomic force microscope and the data is processed and analyzed with well-known image segmentation algorithms. For relevant statistics, over 3000 grains are evaluated for each sample. The data show pronounced asymmetric grain growth with increasing deposition temperature from almost spherical grains at room temperature to elongated needlelike shapes at 260 deg. C. The average size along the major axis increases from 35 to 200 nm and along the minor axis from 25 to 90 nm. The distribution is almost symmetric at low-deposition temperatures, but becomes lognormal at higher temperatures. Strikingly, the major axis and minor axis of the elliptically shaped grains have different distributions at all temperatures due to the planar asymmetry of the molecule.

36 MATERIALS SCIENCE↗

DESI DR2 Baryon Acoustic Oscillations from the Lyman Alpha Forest Multipoles

We present an alternative measurement of the Baryon Acoustic Oscillation (BAO) using the Legendre multipole representation of the Ly$α$ forest correlation functions from the second data release (DR2) of the Dark Energy Spectroscopic Instrument survey. Compressing the auto- and cross-correlation functions into Legendre multipoles yields a positive-definite covariance matrix without any smoothing -- unlike the baseline DR2 analysis -- thanks to a significantly reduced data vector size. We introduce the statistical corrections required to debias the finite-sample covariance matrix estimate and demonstrate that monopole and quadrupole terms for both auto- and cross-correlations can be used even when the correlation functions are distorted by continuum errors and contaminated by metals. This formalism has slightly diminished the constraining power of the BAO scale, while considerably weakening constraints on nuisance parameters. We measure the isotropic BAO scale with $0.93\%$ precision at $z_\mathrm{eff}=2.35$, the Hubble parameter $H(z_\mathrm{eff})=(239.5\pm3.4)~(147.09~\mathrm{Mpc}/r_d) ~\mathrm{km~s}^{-1}~\text{Mpc}^{-1}$, and the transverse comoving distance $D_M(z_\mathrm{eff})=(5.80 \pm 0.10)~(r_d/147.09~\mathrm{Mpc})$~Gpc for a given value of the sound horizon ($r_d$). Our BAO results are entirely consistent with the baseline DR2 analysis.

Karaçaylı, Naim Göksel [Chicago U., KICP; Ohio Sta↗